Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

AM-Produced Titanium Component Fabrication

Active

Federal

Response Deadline09/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled AM-Produced Titanium Component Fabrication, involves the additive manufacturing of titanium tube assemblies for prime contractors under DLA supply contracts. The work requires the use of industrial metal 3D printing technologies, specifically DMLS or SLM, utilizing titanium powder that complies with ASTM B338 standards. All produced items must be submitted to the Engineering Support Activity for evaluation according to L31 Additive Manufacturing guidelines, with the final delivery consisting of the assemblies and all necessary validation documentation. The project is managed by the Department of Defense Fluid Handling Division and is designated as a Total Small Business Set-Aside under NAICS code 332996. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026.

General Info

Subcontract for 3D printing titanium tube assemblies for DoD in New Cumberland, Pennsylvania.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7M4-26-T-412L.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TUBE ASSEMBLY, METAL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 28

Submission deadline

Response Deadline

09/28/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs additive manufacturing of titanium tube assemblies for prime contractors on DLA supply contracts. Utilizes industrial metal 3D printing (DMLS or SLM) with titanium powder compatible with ASTM B338. Submits items to the Engineering Support Activity (ESA) for evaluation per L31 Additive Manufacturing (JUN 2018) guidelines. Delivers AM-produced assemblies and validation documentation.

Similar Contracts

Same NAICS industry code

Fabrication and Supply of Metal Tube AssembliesThis subcontract involves the fabrication and supply of finished metal tube assemblies for prime contractors supporting Department of Defense projects under the Land Supply Chain agency. The scope of work requires the use of precision machining, bending, cutting, and welding to produce assemblies that meet specific metal tube standards. All production must adhere to MIL-S-163 steel mill product standards and comply with DFARS 252.223-7008 prohibitions regarding the use of Hexavalent Chromium. The project is categorized under NAICS code 332996 and will be performed at Picatinny Arsenal. Interested parties must respond by September 28, 2026, following the posting date of September 15, 2026.

LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Titanium Tube Assembly Manufacturing (NSN 4710012522380)This subcontract opportunity with the Department of Defense Fluid Handling Division involves the supply and fabrication of seamless, prebent titanium tube assemblies under NSN 4710012522380. The contractor is responsible for procuring titanium tubing that meets ASTM B338 standards and performing precision bending to specifications of 0.38 inch outer diameter and 0.049 inch wall thickness. All finished assemblies must be marked according to MIL-STD-129 and require the use of precision tube bending machinery. The project is designated as a Total Small Business Set-Aside under NAICS code 332996, with performance taking place in New Cumberland, Pennsylvania. Interested parties must submit their responses by September 28, 2026. This contract supports prime contractors fulfilling DLA supply requirements for specialized titanium components.

FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7M4-26-T-412L

This contract is for the procurement of 24 seamless, prebent metal tube assemblies made of titanium per ASTM B338, featuring a 0.38 inch outer diameter and 0.049 inch wall thickness. The items are designated as critical application items and must adhere to specific technical data packages and drawings, including part number 5773203-12.5.1HB. The acquisition is a total small business set-aside under NAICS code 332996, with delivery required within 167 days after order, targeting a need date of March 15, 2027. The agreement mandates strict compliance with DLA technical and quality requirements, including specific packaging standards and the prohibition of class I ozone depleting chemicals and the intentional addition of mercury. Inspection and acceptance will occur at the origin, with delivery set as FOB origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract also incorporates requirements for covered defense information and configuration change management.

FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

MANIFOLD, HYDRAULIC SYS

Solicitation # SPE7M0-26-T-087N

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE7M0-26-T-085S

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE7M0-26-T-084W

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7L1-26-T-12K1

LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

ADAPTER, STRAIGHT, PIPE

Solicitation # SPE7M0-26-T-084X

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

SEAL, CONICAL, FLARED

Solicitation # SPE7M4-26-T-412D

FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

ELBOW, PIPE TO TUBE

Solicitation # SPE7M0-26-T-085P

Solicitation SPE7M0-26-T-085P is issued by the DLA Land and Maritime Maritime Supply Chain ESOC Buys for the procurement of one brass pipe-to-tube elbow, identified by NSN 4730-01-627-070. The technical specifications require a 3/16 inch nominal tube size with an internal flare and a 1/8 inch nominal pipe size, featuring Vibra-Seal applied to the pipe thread end. Compatible part numbers include Parker-Hannifin Corp 93061 P/N VS249IFHD-3-2 and Danfoss Power Solutions II, LLC 01276 P/N 402X3Z. The required delivery date is September 16, 2026, with a delivery timeframe of five days after receipt of order. The contract is established as FOB Origin, with inspection and acceptance occurring at the destination. Shipping is directed to the AWCF SSF SSA at Fort Bragg, North Carolina, via the fastest traceable means, specifically excluding parcel post. Packaging must adhere to ASTM D3951 and RP001 DLA Packaging Requirements, while marking and labeling must comply with MIL-STD-129. The DLA Master List of Technical and Quality Requirements takes precedence over ASTM standards. Payment will be processed electronically through the Wide Area WorkFlow system. This procurement incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and basic safeguarding of covered contractor information systems.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE7M3-26-T-9128

FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7M3-26-T-9129

FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Preformed Hose SupplierThis subcontract under the Department of Defense Fluid Handling Division involves the manufacture and supply of preformed hoses tailored to specific geometries for prime contractors. The supplier is responsible for sourcing or producing these components and ensuring all markings strictly adhere to MIL-STD-129 and Special Marking Code 32 to facilitate accurate shelf-life tracking. All marking equipment used must meet established military standards for Army materiel. The contract requires the delivery of marked and packaged preformed hoses on an FOB Origin basis. This opportunity falls under NAICS code 339113 and was posted on September 15, 2026, with a response deadline of September 28, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Special Hose Clamps (Part #7018324217)This subcontract involves the manufacture or sourcing of 30 specialized hose clamps, identified as Part #7018324217, to support prime contractors delivering for the Department of Defense Fluid Handling Division. All units must strictly adhere to Special-SHA specifications and the DLA Master List of Technical and Quality Requirements to ensure compliance with federal standards. The contractor is responsible for packaging the items according to ASTM D3951 and palletizing them per RP001 guidelines. This procurement falls under NAICS code 332510, with a response deadline set for September 28, 2026.

Hardware Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Restrictor Unit, FLU (NSN 4730-01-667-8657)

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 9 hours ago

DEADLINE

Precision Fabrication of Valve Stem GuidesThis subcontract involves the precision machining and fabrication of valve stem guides to support prime contractors delivering for the Department of Defense Fluid Handling Division. The scope of work includes precision turning and milling of metal components according to Vacco Industries specifications, as well as surface finishing, deburring, and chemical degreasing for Oxygen Clean processing. All production must be carried out using CNC lathes, mills, and CMM instruments to ensure strict adherence to technical requirements. The provider must hold AS9100 or ISO 9001 certification to qualify for this effort. The final deliverables consist of finished, cleaned, and inspected guides. This opportunity is categorized under NAICS code 332710, with the place of performance located in Tracy, California. Responses are due by September 28, 2026.

POSTED

about 9 hours ago

DEADLINE

Supply of Oxygen-Clean Valve Stem GuidesThis subcontract with the Department of Defense Fluid Handling Division involves the supply of four precision-machined valve stem guides for prime contractors. The contract specifically covers Vacco Industries part numbers V2B11404-4MF, V3D10233, V3D10254, and V3D10270. A critical requirement of this agreement is that all parts must be processed and delivered as Oxygen Clean to ensure safety and prevent contamination within high-pressure oxygen environments. Consequently, the supplier must possess certified oxygen cleaning facilities to meet these specifications. The work is to be performed in Tracy, California, under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of 2-Inch Deck Drain (NSN 2090015726651)This subcontract involves the supply of one 2-inch deck drain, specifically part number D310B205 from Loeffler Corp or an approved equivalent, for prime contractors supporting DLA Land and Maritime fluid handling contracts. The item must be packaged and marked according to solicitation standards and delivered FOB Destination to the USS RUSHMORE LSD 47. The contract is managed by the Department of Defense Fluid Handling Division under NAICS code 332999 and requires full compliance with FAR 52.204-24. Performance will take place at FPO 96677, with a response deadline set for September 28, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Sediment Strainer Parts Kit SupplierThis subcontract involves the supply of a complete parts kit for a sediment strainer intended for prime contractors working with the Department of Defense Fluid Handling Division. The supplier is responsible for sourcing or manufacturing individual components for NSN 4730-01-615-1405, assembling these parts into a single unit, and ensuring all materials conform to DLA RA001 requirements. Packaging must be completed according to ASTM D3951 and RP001 standards for delivery to the performance location in Loxley, Alabama. The opportunity is categorized under NAICS code 332999, with a response deadline of September 28, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Heavy-Duty Swivel Casters (NSN 5340013960533)This subcontract involves the supply of one heavy-duty swivel caster for prime contractors working on Department of Defense projects within the DLA Fluid Handling Division. The contractor is responsible for manufacturing or sourcing a caster that conforms to NSN 5340013960533 featuring 8-inch wheels. All deliverables must adhere to RA001 DLA Technical and Quality Requirements and Critical Application Item standards, with packaging performed according to MIL-STD-2073-1E. The project is categorized under NAICS code 332510 and is to be performed at JBPHH in zip code 96853-5253. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026. The final requirement is the delivery of one properly packaged and labeled swivel caster.

Hardware Manufacturing

POSTED

about 9 hours ago

DEADLINE

MIL-STD-129 Packaging and Palletization ServicesThis subcontract for the Department of Defense Fluid Handling Division involves providing specialized military packaging, labeling, and palletization services for prime contractors. The contractor is responsible for ensuring all shipments are packed and labeled in strict accordance with MIL-STD-129 and palletized according to RP001 DLA Packaging Requirements for Procurement, utilizing DLA-approved materials and compliant labeling systems. The project is based in New Cumberland, Pennsylvania, under NAICS code 493110. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026.

General Warehousing and Storage

POSTED

about 9 hours ago

DEADLINE

Nonmetallic Hose Assembly SupplierThis subcontract involves the manufacture and supply of 27 nonmetallic hose assemblies under NSN 4720016523746 for the Department of Defense Fluid Handling Division. The supplier is responsible for producing or sourcing these assemblies according to strict technical specifications and ensuring full compliance with ITAR or EAR export control regulations. The project falls under NAICS code 326220 and is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 28, 2026, to support prime contractors in the delivery of these specialized nonmetallic components.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 9 hours ago

DEADLINE

MIL-STD-129 Compliant Packaging and PalletizationThis subcontract involves providing specialized military marking and palletization services for prime contractors supporting the Department of Defense Fluid Handling Division. The scope of work requires marking shipments in strict accordance with MIL-STD-129 and palletizing components according to RP001 DLA Packaging Requirements for Procurement. All materials and pallets used must comply with DLA standards to ensure shipments are ready for FOB Origin delivery. The project is categorized under NAICS code 488510 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 28, 2026, following the posting date of September 15, 2026.

Freight Transportation Arrangement

POSTED

about 9 hours ago

DEADLINE

Supply of Sedim Strainer ElementsThis subcontract involves the procurement and delivery of 2,000 industrial strainer elements, specifically O. C. Keckley Company Part No. 062PML-32FFY-B2-BA, to support prime contractors on Department of Defense projects within the DLA Land and Maritime Fluid Handling Division. The items must meet Critical Application Item quality standards and adhere to the Berry Amendment and Buy American domestic material restrictions. Additionally, the supplier is required to provide Safety Data Sheets for any hazardous materials involved. The contract is categorized under NAICS code 423840 and specifies New Cumberland as the place of performance. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS