Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Amendment 00001 Request for Quote (RFQ) 2031ZA26Q00102 for Fourier Transform Infrared (FTIR) Microscope

Active

A00001-2031ZA26Q00102Federal

Response Deadline07/31/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of The Treasury → Office Of The Chief Procurement OfficerView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

Washington, DC, 20228, USA

Set-Aside

SBA

Documents

(1)

A0001+RFQ+2031ZA26Q00102+-+FTIR+Microscope.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PostedJul 28

special-notice

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 06:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Treasury → Office Of The Chief Procurement Officer

Contacts1 person available

OfficeWASHINGTON, DC, 20228, USA

Organization / Agency

Department Of The Treasury → Office Of The Chief Procurement Officer

View Agency Profile

Office AddressWASHINGTON, DC, 20228, USA

Contacts

Naweed Nezam

contact@example.gov

Full Description

Show more

The purpose of Amendment 00001 Request for Quote (RFQ) 2031ZA26Q00102 for Fourier Transform Infrared (FTIR) Microscope is to respond to questions submitted by vendors regarding the solicitation. See the Summary of Changes.

Similar Contracts

Same NAICS industry code

MEASURING TUBE, GAS

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

DETECTOR, GASThe contract is for a single unit of a gas detector, part number C03-0907-001 and NSN 6665016083038, supplied by HONEYWELL ANALYTICS INC., under solicitation SPE7M0-26-T-021M. The item is classified as a Type I shelf-life item with a non-extendable six-month shelf life, requiring strict compliance with packaging, marking, and shipping standards per MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 for Type I shelf-life identification. Packaging and palletization must adhere to DLA’s RP001 requirements, and hazardous materials shipping protocols under IP025 apply. Delivery is FOB origin with zero quantity variance, inspection and acceptance occurring at the destination within five days of shipment. The item must be shipped via the fastest traceable method, explicitly prohibiting parcel post, with two separate delivery points identified under different project codes: one to Fort Eustis, Virginia and another to Coraopolis, Pennsylvania. The required delivery dates are July 23, 2026, and July 27, 2026, respectively, and the contract is governed by the DLA Master List of Technical and Quality Requirements incorporated by reference. The unit of issue is each, and pricing is set at one dollar per unit. Government use identifiers and tracking codes are provided for logistics control and accountability.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

ADJUSTING DEVICE, BEThe contract pertains to the procurement of one adjusting device, belt tension gauge, with NSN 2990011415776, under solicitation SPE7L1-26-T-886A. Delivery is required within 20 days from the order date, with FOB origin terms, and the item must be shipped by the fastest traceable means—parcel post is prohibited. The delivery destination is the Blount Island Property Account in Jacksonville, Florida, with an alternate shipment address to The Basic School in Quantico, Virginia. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129K, with the waiver of MIL-L-61002 requirements substituted per DGSC directive. Marking and palletization follow DLA’s packaging protocols, and the use of plastics for wrapping, cushioning, or dunnage is to be avoided where feasible. The contract incorporates technical and quality standards from the DLA Master List, including a specific prohibition against intentional introduction of mercury or mercury-containing compounds into the supplied hardware, with limited exceptions for functional uses such as batteries, fluorescent lamps, sensors, and weapon systems, all of which must include secondary containment as per NAVSEA 5100-003D. The quantity is strictly fixed at one unit with zero variance allowance, and inspection and acceptance occur at the destination. The original required delivery date is July 28, 2026, and the item is subject to defense information handling protocols under RD003.

LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

UIFB Brand Name or Equal HunterLab MINISCAN EZ AND COLORFLEX L2The Virginia Department of Transportation is soliciting bids for the procurement of new HunterLab MiniScan EZ 4500L and ColorFlex Spectrophotometer/Colorimeter systems, with brand name or equal alternatives permitted. The equipment is intended for precise color measurement and analysis and must include all necessary accessories to ensure full operational capability upon delivery. This solicitation, identified as QQ-125108, was posted on July 28, 2026, and responses are due by August 3, 2026, at 4:00 PM. The place of performance is specified as Sandston, Virginia, with delivery and installation required at that location. The solicitation is categorized under state and local government procurement, with no specific set-aside designation. All inquiries and communications regarding this contract must be directed to Christine Berry at the Virginia Department of Transportation, using the provided phone number and email address. The full details and submission portal can be accessed through the provided UI link.

Virginia Department of Transportation

POSTED

about 18 hours ago

DEADLINE

A4 Power Supply Repair Service

Navsup Weapon Systems Support

POSTED

about 19 hours ago

DEADLINE

**AMENDED 002** -6640 - WSNC IDIQ Respiratory Fit Testing Equipment, Supplies, and Annual Calibrations

260-NETWORK Contract Office 20 (36C260)

POSTED

about 19 hours ago

DEADLINE

Astromaterials Glovebox Systems - Design & Fabrication (A-BOX)This notice, issued by NASA’s Johnson Space Center under solicitation number 80JSC026A-BOX, is a Request for Information (RFI) for the design, fabrication, testing, delivery, and installation of controlled-atmosphere glovebox systems to support the Astromaterials Research and Exploration Science Curation Facility. The systems are intended for handling lunar and planetary samples, including those from Artemis missions, and must operate in ambient, cold (−85 to −20 °C), and ultra-cold/cryogenic (< −85 °C) environments while maintaining inert atmosphere conditions. Technical requirements are aligned with the American Glovebox Society Guidelines AGS-G001-2007 (3rd Edition), and compliance with quality standards such as ISO9001, AS9100, and NQA-1 is mandatory. The RFI seeks industry input on feasibility, capabilities, and cost estimates, with no formal proposals required. Access to the technical library containing detailed requirements is granted through SAM.gov after completing a two-step verification process and submitting a formal request form to NASA, with all requestors responsible for U.S. export control compliance. The response deadline has been extended to August 5, 2026, at 4:00 PM Central Time. The RFI emphasizes small business participation and solicit feedback on realistic subcontracting goals, barriers to entry for small businesses, and strategies to enhance involvement such as modularizing scope or encouraging teaming arrangements. NASA is considering potential set-asides for Small Business, Small Disadvantaged Business, HUBZone, Veteran-Owned, Service-Disabled Veteran-Owned, and Women-Owned Small Businesses. Organizational conflicts of interest (OCI) are a significant concern due to the nature of prior involvement in astromaterials handling and related design work; respondents must disclose any potential OCI and propose mitigation strategies, though NASA’s review at this stage does not constitute formal approval or assurance. Responses must be submitted electronically via email to the designated contracting officer and contract specialist, formatted according to Attachment II—Capabilities Questions and Responses—which addresses small business utilization, OCI, technical capability, and business considerations. The place of performance is the ARES Curation Facility in Houston, Texas, and final delivery and installation will occur there. No contract value, pricing, or award criteria are provided, as this is purely an information-gathering phase to inform future procurement strategy. Any information submitted is treated as voluntarily provided under FOIA and will not be publicly

NASA Johnson Space Center

POSTED

about 19 hours ago

DEADLINE

6640--MATEO TL RUO, Integrated Digital MicroscopeThis is a Sources Sought notice issued by the Department of Veterans Affairs, Network Contracting Office 1, to conduct market research for the acquisition of a Leica Mateo TL RUO integrated digital microscope for research use at the White River Junction VAMC. The notice is not a solicitation and no contract will be awarded based on responses; it serves solely to identify qualified vendors, assess market capabilities, and inform future procurement strategy under NAICS code 334516. Respondents must submit a capability statement addressing the technical requirements of the microscope system, including a 6-megapixel color camera, 15.6-inch monitor, four pre-installed objectives, Enersight software with confluency module, and a guide kit, along with a completed Sources Sought Worksheet that includes company details, Unique Entity Identifier, CAGE code, SAM registration status, and socioeconomic certifications such as small business, VOSB, SDVOSB, 8(a), HUBZone, or WOSB status. Responses must be submitted electronically via email to antoinette.sebastian@va.gov and cory.dionne@va.gov by July 7th, 2026, at 3:00 PM EST, with RFQ #36C24126Q0494 in the subject line, and must not exceed eight total pages in Microsoft Word or Adobe PDF format. No reimbursement will be provided for responses, no feedback or evaluation results will be given, and inclusion in any future solicitation is not guaranteed. The Government retains ownership of all submitted data, and future procurement could result in a set-aside for small businesses, VOSBs, or SDVOSBs, or proceed as full and open competition based on the market research findings. The place of performance is designated as White River Junction, Vermont, with no packaging, delivery, invoicing, or payment details specified, as this notice precedes any formal contracting action.

241-NETWORK Contract Office 01 (36C241)

POSTED

about 19 hours ago

DEADLINE

RF Magnetron Sputter power SuppliesThe U.S. Naval Research Laboratory, under the Department of Defense, is seeking two RF magnetron sputter power supplies for combinatorial materials growth, as part of a combined solicitation numbered N00173-26Q-1301392637. The requirement is posted under NAICS code 334516 and targets advanced deposition systems essential for high-throughput materials research, typically used to create and characterize diverse thin-film compositions simultaneously. Offers are due by August 2, 2026, with performance expected to occur at the agency’s facility in Washington, District of Columbia, 20375. The point of contact for inquiries is Danielle Davenport, who can be reached via email at danielle.c.davenport4.civ@us.navy.mil. The solicitation is open to eligible contractors without set-aside restrictions and reflects a direct procurement by a federal research and development entity focused on next-generation material science applications.

Naval Research Laboratory

POSTED

about 19 hours ago

DEADLINE

FDA Subcutaneous Injection Site Simulator (SCISSOR)The FDA’s Division of Pharmaceutical Quality Research V is seeking a subcutaneous injection site simulator known as SCISSOR under solicitation number 75F40126Q134239, which was posted on July 23, 2026, with a response deadline of July 31, 2026, at 7:00 PM Eastern Time. This procurement is a total small business set-aside under FAR 19.5, reserved exclusively for small businesses, and falls under the NAICS code 334516 for medical and surgical equipment and supplies manufacturing. The solicitation is managed by the FDA Office of Acquisition and Grant Services under the Department of Health and Human Services, with the办公 location in Rockville, Maryland, 20852. The primary point of contact for inquiries is Tim Walbert, who can be reached via email at timothy.walbert@fda.hhs.gov or by phone at 301-796-1768. The required device must accurately replicate the anatomical and tactile properties of human subcutaneous tissue for use in pharmaceutical quality research, and full technical specifications are detailed in the attached PDF document referenced in the contract description.

FDA Office Of Acq Grant Svcs

POSTED

about 19 hours ago

DEADLINE

Plate ReaderThe instrument required is a high-performance plate reader capable of real-time multimodal measurements including monochromator-based fluorescence, UV/Vis absorbance, and luminescence. It must feature a linear variable monochromator with tunable band passes up to 100nm and a tunable dichroic mirror enabling an air-based light path without fiber optics or light guides. Fluorescence detection requires auto-ranging sensitivity and gain capable of handling signals up to 760 million counts with enhanced dynamic range autoranging that activates in under 0.1 seconds. Absorbance measurements must be performed using a dedicated diode array spectrometer, not a monochromator, capable of capturing a full spectrum from 220nm to 1000nm at 1nm resolution in less than 0.5 seconds with simultaneous wavelength acquisition. The optical head must be heated to maintain a uniform temperature environment for incubated microplate wells during measurement, with a temperature controller capable of reaching at least 45°C. Bottom reading capability, two integrated reagent injectors for automated kinetic and flash luminescence triggering, and an atmospheric control unit with software-adjustable CO2 and O2 levels including 5% CO2 support for cell culture are mandatory. The system must be accompanied by comprehensive software for data visualization and analysis. The contract, titled Plate Reader and identified by solicitation number W911S226U3818, was posted on July 24, 2026, with a response deadline of August 6, 2026. It is a combined solicitation under NAICS code 334516, issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. The place of performance is listed with zip code 10996, and the primary point of contact is Carl Lundell, reachable at carl.lundell@westpoint.edu or 845-938-8298. The instrument must meet all technical specifications precisely to satisfy experimental and environmental demands of biological applications, particularly those requiring precise temperature, gas control, and rapid, high-resolution optical measurements.

W6QM Micc-Ft Drum

POSTED

about 19 hours ago

DEADLINE

Invitrogen EVOS M5000 Imaging SystemsThe presolicitation notice for the Invitrogen EVOS M5000 Imaging Systems, identified by solicitation number 12639526Q0236, was posted on July 28, 2026, with a response deadline of August 10, 2026, at 4:00 p.m. Eastern Time. This action is issued under FAR Overhaul subpart 5.101 as a presolicitation to provide industry with advance notice of an upcoming procurement opportunity, allowing potential vendors time to prepare. The procurement is not subject to any set-aside categories and falls under NAICS code 334516, which classifies it within the manufacturing of laboratory equipment and instruments. The contracting activity is led by the Department of Agriculture through its office in Minneapolis, Minnesota, with the place of performance designated as Manhattan, Kansas, 66502. Julia Lackey from the USDA serves as the primary point of contact for inquiries, reachable via email at Julia.Lackey@usda.gov or by phone at 202-619-8577, and further details are accessible through the provided SAM.gov link.

Mrpbs Minneapolis Mn

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of The Treasury → Office Of The Chief Procurement Officer

Same awarding agency

Notice of Intent to Award Brand NameThe U.S. Department of the Treasury, through the Office of the Chief Procurement Officer, has issued a notice of intent to award a contract for bench stock items including specific brand-name parts: Crown CR813533 Potentiometer, YA CRO77084-301-88, ZZ SLA6200, and M1501208513A. This procurement is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to bid, and the North American Industry Classification System code 333924 applies to this action. The solicitation number is 2031ZA26Q00090, with the notice posted on July 28, 2026, and responses due by 6:00 PM Eastern Time on August 3, 2026. The contract will be performed in Washington, District of Columbia, with a zip code of 20228, and all activity is managed by the federal agency headquartered in Washington, DC.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

NTERFACE CARPET TILES MARRAKESH CLASSICSThe solicitation seeks quotes for NTERFACE CARPET TILES MARRAKESH CLASSICS under a fixed-price contract, issued as a combined solicitation in accordance with Federal Acquisition Regulations Subparts 12 and 13 for commercial items. The procurement is designated as a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and falls under NAICS Code 333248 for Printing Machinery and Equipment Manufacturing. The opportunity was posted on July 28, 2026, with a response deadline of July 29, 2026, at 4:00 PM Eastern Time. All proposals must be submitted through the SAM.gov portal, and performance is required in Washington, District of Columbia, with delivery to a zip code of 20228. The contract is managed by the Office of the Chief Procurement Officer within the Department of the Treasury, and inquiries should be directed to Adnan Sillah, the primary point of contact, via phone or email provided.

All Other Industrial Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 9 hours

Water Waste Treatment Services

Facilities Support Services

POSTED

about 19 hours ago

DEADLINE

Currency Bundle Labels and Cash PakThe U.S. Department of the Treasury, through the Office of the Chief Procurement Officer and the Bureau of Engraving and Printing, is conducting a sources sought action for currency bundle labels and Cash-Pak labels under solicitation number 2031ZA26N00047, with a response deadline of July 31, 2026. This procurement is a Total Small Business Set-Aside under FAR 19.5, restricting eligibility to small businesses with 500 or fewer employees as defined by NAICS code 322299. The effort is currently in the market research phase, and no formal contract or pricing will be issued at this time; a Request for Quote will follow. Respondents must provide a capability statement, technical documentation, and product literature demonstrating their ability to supply printed and blank currency bundle labels in both old and new currency designs, along with Cash-Pak labels in solid color block and diagonal dropout color block variants. Each label set must be delivered as a numerically matched Process Set—either for 100,000 sheets (3,200 bundle labels and 200 Cash-Pak labels) or 200,000 sheets (6,400 bundle labels and 400 Cash-Pak labels)—with strict adherence to specifications including white coated substrate with permanent pressure-sensitive adhesive, black typography, Pantone® color matching, and bar code print quality graded C/10/630 or better. Cash-Pak labels must be tamper-evident, and every fourth bundle label must include an 8 by 3 mm horizontal black counting mark. Labels must be packed in continuous rolls with no breaks in the web, individually cartoned by Process Number, and conform to Department of Transportation and National Motor Freight Classification packaging standards, with cartons not exceeding 381mm in width, depth, or 305mm in height. Each carton must be clearly marked with process number, bank identification, denomination and series, serial number, prefix and suffix letters, contractor name, and BEP purchase order number. FRB Eagle labels require additional identification by stock item numbers and contractor information. All deliveries must be accompanied by written certifications confirming compliance with EHS Requirements (BEP 75B-07.0-05), including recovered content disclosures if applicable, and copies of inspection and test results performed to ANSI/ASQ Z1.4 standards,

All Other Converted Paper Product Manufacturing

POSTED

DEADLINE

Packing Slip & Labeling Compliance ServicesThe contract titled Packing Slip & Labeling Compliance Services requires the preparation of compliant packing slips that include all mandatory data fields and proper external attachment via self-adhesive envelopes, ensuring alignment with federal standards for documentation and shipment labeling. The work is expected to be performed at a designated location in Fort Worth, Texas, with a zip code of 76131, and is classified under NAICS code 561499, indicating it falls under other support services. This is a subcontract opportunity posted by the Office of the Chief Procurement Officer under the Department of the Treasury, with a response deadline of August 4, 2026, at 8:00 PM Eastern Time. The solicitation does not indicate a specific set-aside type or organizational eligibility restrictions, and while no point of contact is listed, interested parties may access further details through the provided SAM.gov link.

All Other Business Support Services

POSTED

DEADLINE

Warranty & Defect Resolution SupportThe contract encompasses the management of a one-year warranty program for equipment or systems delivered to the government, requiring full responsibility for identifying, analyzing, and resolving all defect claims arising within the warranty period. The contractor must perform comprehensive defect analysis to determine the root cause of non-conforming units and ensure timely replacement of those units at no cost to the government, maintaining full compliance with warranty obligations without additional burden on federal resources. All activities must be executed efficiently to minimize disruption and ensure operational continuity. Performance of this subcontract is designated to occur in Fort Worth, Texas, with a primary focus on service delivery aligned with the Department of the Treasury’s Office of the Chief Procurement Officer. The contract type is classified as a subcontract under NAICS code 811310, indicating specialized repair and maintenance services. The solicitation was posted on July 21, 2026, with proposals due by August 4, 2026, and the contractor is expected to establish robust processes for tracking, documenting, and resolving warranty claims in a manner consistent with federal standards, ensuring accountability and transparency throughout the warranty lifecycle.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Specialized Packaging & Shipping LogisticsThe contract requires specialized packaging solutions that meet strict security standards for transportation to a secure government facility, with all shipments subject to F.O.B. destination terms, meaning the provider assumes full responsibility until delivery is completed at the designated location. Real-time tracking must be implemented throughout transit, ensuring complete visibility and accountability from origin to final delivery point. Advance notice of shipment arrival is mandatory to coordinate secure receiving protocols at the facility in Fort Worth, Texas, with the ZIP code 76131 serving as the primary place of performance. The solicitation falls under NAICS code 484220, indicating a focus on general freight trucking, and is classified as a subcontract opportunity under the Office of the Chief Procurement Officer within the Department of the Treasury. Responses must be submitted by the deadline of August 4, 2026, at 8:00 PM, with no set-aside provisions specified, and the contract is active as of July 21, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Certified Conformance & Quality Documentation ServicesThe contract outlines the preparation and validation of Certificates of Conformance for each shipment to verify full compliance with required technical specifications, ensuring consistent quality and adherence to established standards. This service is essential for maintaining regulatory and operational integrity across all delivered goods, with the contractor responsible for accurate documentation and meticulous validation processes aligned with the specified technical requirements. The contract is classified as a subcontract under NAICS code 541330, issued by the Office of the Chief Procurement Officer within the Department of the Treasury, with performance required at Fort Worth, Texas, 76131. The opportunity was posted on July 21, 2026, and responses are due by August 4, 2026, at 8:00 PM Eastern Time. No solicitation number or set-aside details are provided, and the point of contact information is not listed, but all submissions must be made through the designated SAM.gov portal.

Engineering Services

POSTED

DEADLINE

Notice of Intent For NotaMesh ScreensThe Treasury Common Services Center-Acquisition Center intends to award a sole source Firm Fixed Price contract to Koenig & Bauer Banknote Solutions for 90 units of proprietary NotaMesh Screens required for the production of U.S. currency at the Bureau of Engraving and Printing’s Western Currency Facility in Fort Worth, Texas. These screens are critical to the optically variable ink screen printing process and are exclusively manufactured by Koenig & Bauer, justifying non-competitive procurement under FAR Subpart 6.302-1(a)(2)(ii)(b). The requirement specifies exact technical parameters including dimensions of 881.65mm x 900mm, a thickness of 58µm ± 3µm, and a 25% ± 3% open area, with delivery due within 12 weeks of award on an F.O.B. destination basis to the Fort Worth facility. All shipments must include a Certificate of Conformance and a one-year written warranty covering defects in material or workmanship, with replacements provided at no cost. Packaging must prevent damage during transit, and packing slips must be clearly labeled with BPA Call Number, vendor contact, total weight, and line item details including manufacturer ID and BEP product ID. Submission of capability statements, questions, or comments is required exclusively via email to kendra.napper@bep.gov no later than 4:00 PM Eastern Daylight Time on August 4, 2026, and respondents must be currently registered and active in the System for Award Management. No competitive solicitation will be issued, and no pricing details are disclosed as this is a pre-award notice with no formal CLINs or contract value stated. The contracting office is located in Washington, DC, and all deliveries must adhere to the receiving schedule of the Fort Worth facility, operating Monday through Friday from 6:00 AM to 2:30 PM, excluding federal holidays.

Commercial Screen Printing

POSTED

DEADLINE

Vehicle and Operational Compliance Management

All Other Automotive Repair and Maintenance

POSTED

DEADLINE

Quality Control and Compliance Reporting

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Incineration Services for Sensitive Waste

Other Nonhazardous Waste Treatment and Disposal

POSTED

DEADLINE