Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on October 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

ANGLE, STRUCTURAL

Closed
SPE8E4-26-T-2329Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331110
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-27-T-0385
This contract involves the procurement of eight metal sheets of Steel Comp 301, cold rolled, half hard, and descaled and bright overall. Each sheet must be 0.071 inches thick, 36.00 inches wide, and 10.00 feet long. The material must be supplied in whole feet lengths only, and no test coupons are permitted. The procurement is a total small business set-aside and requires that only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award. Key technical requirements include a mandatory Certificate of Quality Compliance (Mill-Material Certification) provided with every shipment. Strict marking requirements are in effect, requiring continuous identification including the DLA contract delivery order number, NSN, specification number, grade, alloy, manufacturer's name, and dimensions. Permissible marking methods are limited to stamping or stenciling, and failure to comply with these legibility and stability standards will result in product rejection. Packaging must adhere to MIL-STD-2073-1E and RP001, featuring robust four-corner protection, full coverage side edge protection, and fiberboard top and bottom coverage. Inspection and acceptance will occur at the destination. The contract incorporates several federal regulations, including the Buy American and Balance of Payments Program, and requires the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment processing.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 9 hours ago

DEADLINE

in 11 days
NAICS: 331110
New
DIBBS
ANGLE, STRUCTURAL
Solicitation # SPE8E4-27-T-0396
This fixed-price contract, issued by DLA Troop Support Construction and Equipment (Metals), is for the procurement of 585 feet of structural angle. The material must be Aluminum Alloy 5086, H-111 strain hardened and extruded, with dimensions of 2.000 inches in height, 2.000 inches in width, and 0.250 inches in thickness. Each unit must be supplied in whole feet lengths, ranging from a minimum of 20 feet to a maximum of 30 feet. The procurement is a small business set-aside with a price evaluation preference for HUBZone concerns. Delivery is required within 93 days, with an original required delivery date of February 1, 2027, shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. Award eligibility is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contractor must provide a Certificate of Quality Compliance with every shipment and adhere to strict marking requirements, including the DLA contract delivery order number, NSN, and manufacturer details, using approved stamping or stenciling methods. Packaging and preservation must comply with MIL-STD-2073-1E and ASTM B660. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, the Buy American Act, and the prohibition of covered defense telecommunications equipment. Invoicing and payment must be processed electronically via the Wide Area WorkFlow system.
DLA DIST SAN JOAQUIN

POSTED

about 9 hours ago

DEADLINE

in 11 days
NAICS: 331110
New
Federal
Steel Basic Ordering Agreement
Solicitation # W519TC26DBOAS
The Army Contracting Command-Rock Island Arsenal is establishing a multi-award, no-cost Basic Ordering Agreement (BOA) for the procurement of raw metal stock and components, including steel structurals, plates, sheets, and tubing. This three-step procurement framework begins with a qualification phase where responsible small businesses must demonstrate technical capability by completing a purchase description questionnaire. Only offerors rated as acceptable during this phase will be granted a BOA, which remains valid for up to five years and is subject to annual reviews. Once the pool of qualified contractors is established, the government will issue competitive, firm-fixed-price order-level requests for quotes to the BOA holders to support various CONUS sites, including the Blue Grass Army Depot and Pine Bluff Arsenal. To be eligible for award and subsequent orders, contractors must maintain an active SAM.gov registration and a CMMC Level 1 Self-Assessment in the Supplier Performance Risk System. The contract is a total small business set-aside and enforces the Non-Manufacturer Rule and limitations on subcontracting, requiring primes to perform at least 50 percent of the manufacturing cost. Deliveries must adhere to MIL-STD-130 and MIL-STD-129 standards for unique item identification and marking. All payment processing is managed electronically through the Wide Area WorkFlow system.
W6QK Acc-Ri

POSTED

about 14 hours ago

DEADLINE

in 14 days

AI Contract Overview

Show more

Solicitation SPE8E4-26-T-2329 is a fixed-price request for 130 feet of structural angle made from 7075 aluminum alloy with T6 temper. The material must have dimensions of 0.75 inches height, 0.75 inches width, and 0.094 inches thickness, conforming to SAE AMS1013-0602. Supplies must be delivered in whole foot lengths between 10 and 12 feet. The procurement is managed by DLA Troop Support Construction and Equipment (Metals) for delivery to the DLA Distribution Depot Oklahoma at Tinker AFB. Delivery is required within 48 days after order, with a quantity variance allowance of plus or minus 10 percent. Compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory, and only listed suppliers are eligible for award. A Certificate of Quality Compliance (Mill-Material Certification) must accompany every shipment. Strict marking requirements apply, including the DLA contract delivery order number, NSN, and material specifications, using approved stamping or stenciling methods; failure to comply may result in product rejection. Packaging and preservation must adhere to MIL-STD-2073-1E, MIL-STD-129, and ASTM B660/A700 standards. Invoicing and receiving reports must be processed electronically via the Wide Area Workflow system.

General Info

Fixed-price order for 130 feet of 7075 aluminum structural angle for DLA.

NAICS

331110 - Iron and Steel Mills and Ferroalloy Manufacturing

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this first20 pages · rfq
High

Read the document

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • Specialized Steel Sheet SupplyOpen now, due in 11 days
  • Supply of Fastener-Grade Raw MaterialOpen now, due in 8 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

1 update
PhaseClosed
Posted

Solicitation

Deadline changed

Response deadline changed from Oct 5, 2026 to Oct 8, 2026.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DEPOT OKLAHOMA
Contacts1 person available
OfficeUSA

Full Description

Show more
ANGLE,STRUCTURAL
STRUCTURAL ANGLE
ALUMINUM ALLOY
7075 & T6 TEMPER
0.75 IN H
0.75 IN W
10-12 FT LG
0.094 IN THK
0.16 LB/FT
DIMENSIONS IAW SAE AMS10133-0602
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
SPE8E4-26-T-2329
SECTION B
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AMS-QQ-A-200/11A REVISION NR A DTD 10/01/2014 PART PIECE NUMBER:
SPE8E4-26-T-2329
SECTION B
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AMS-QQ-A-200B (R 2012) REVISION NR B DTD 08/01/2004 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AMS10133B REVISION NR B DTD 03/01/2012 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD ASTM B666/B666M-08 REVISION NR DTD 07/15/2008 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016936637 0001 FT 130.000
NSN/MATERIAL:9540005962819
DELIVERY (IN DAYS):0048
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:00 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW ASTM B660 PACKING Z = IAW ASTM B660 MARKING IAW MIL-STD-129
SPECIAL PACKAGING CODES Z AND ZZ SHALL BE AS SPECIFIED IN ASTM A700.
VINYL OR PLASTIC COATED PRESSURE SENSITIVE LABELS ARE AUTHORIZED FOR ALL
MARKING ON STRUCTURAL SHAPES, PIECES SHIPPED LOOSE OR BANDED SECURED
LIFTS. SECURED LIFTS SHALL BE IDENTIFIED ON EACH END.
ADDITIONAL MARKING REQUIREMENTS: WHEN THE
CONTRACT OR ORDER REFLECTS TWO UNITS
SPE8E4-26-T-2329
SECTION B
PR: 7016936637 PRLI: 0001 CONT’D
(EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.)
SHIPMENT MARKINGS SHALL INCLUDE THE
QUANTITY OF BOTH UNITS. THIS MARKING
DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:11/23/2026 Original Required Delivery Date:10/25/2026
SPE8E4-26-T-2329 NSN/Part Number: 9540-00-596-2819 Quantity: 130 FT Purchase Request: 7016936637QTY: 130 Delivery: 48 days ADO

More opportunities from Department Of Defense → DEPOT OKLAHOMA

Same awarding agency

NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-27-T-0382
Solicitation SPE8E4-27-T-0382 is a small business set-aside request for 13 sheets of aluminum alloy Alclad metal sheet, specifically Alloy 2024 Temper T3. The material must feature 0.0025 inch thick cladding on both sides with overall dimensions of 0.050 inches thick, 48 inches wide, and 288 inches long. The procurement is governed by several technical standards, including SAE AMS-QQ-A-250/5C and AMS-QQ-A-250/24C, as well as ASTM B660 and B666. Delivery is required within 162 days after order, with an original required delivery date of February 1, 2027, shipping FOB destination to the DLA Distribution Depot Oklahoma at Tinker AFB. Strict quality and compliance measures are in place, requiring a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award. The contract mandates precise dimensional conformity, prohibiting the use of test coupons. Packaging must adhere to MIL-STD-2073-1E and ASTM B660 Level A requirements, while marking must follow MIL-STD-129 and include specific continuous identification such as the contract delivery order number, NSN, and manufacturer's heat and lot number. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SHUTTLE
Solicitation # SPE7MC-27-T-1374
Solicitation SPE7MC-27-T-1374 is a small business set-aside issued by the DLA Weapons Support Maritime Hardware/Electrical for the procurement of 76 shuttle valves, identified by NSN 4820017137337 and part number MS28767AL-4. This is designated as a critical application item that may require specialized casting, forging, and tooling, which the government may not provide. Manufacturing must adhere to TDP Rev C Gen 4, basic specification MIL-DTL-19068B NOT 1, reference specification MS28767B NOT 2, and reference drawing 16236 EI-017137337 Revision A. The contract strictly prohibits the use of Class I ozone depleting chemicals and the intentional addition of mercury or mercury-containing compounds. Delivery is required within 99 days after receipt of order, with a need ship date of March 1, 2024, and a final required delivery date of June 7, 2027. Shipping is FOB Origin, with inspection and acceptance also occurring at the origin. Items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129, and delivered to the DLA Distribution Depot Oklahoma at Tinker AFB. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors must comply with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information.
Industrial Valve Manufacturing

POSTED

3 days ago

DEADLINE

in 1 day
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS