Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

This Solicitation opportunity from Department Of Defense was posted on July 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

ANGLE, STRUCTURAL

Closed
SPE8E9-26-Q-0587Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This procurement mandates the supply of structural aluminum angle stock made from 7075 alloy in T6511 temper, with precise physical dimensions: 1.750 inches nominal height and width, minimum 10 feet and maximum 12 feet in length, and both flanges at 0.080 inches nominal thickness with a 0.125 inch fillet radius. The material must conform to SAE AMS4154S, ASTM B666/B666M-20, ASTM B660-23, and Fed Spec QQ-A-200/11A standards. Every unit must be clearly marked with the DLA contract delivery order number, NSN, specification revision, grade, alloy, part and die number, temper, manufacturer name, heat and lot number, and dimensions using approved methods—stenciling or stamping, with no die stamping allowed. Adhesive labels are required for small bars, tubes, and shapes under 0.250 inches OD, and tags for wire. Markings must be legible, waterproof, durable, and non-contaminating. Materials must be supplied in whole-foot increments only. Compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory; only suppliers listed on the DLA Troop Support QSLD are eligible for award, and any deviation or use of non-approved sources constitutes an unauthorized substitution with potential criminal penalties. A Certificate of Quality Compliance, or mill certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Packaging must strictly adhere to MIL-STD-2073-1E and RP001 DLA Packaging Requirements, with markings compliant with MIL-STD-129 and no use of parcel post. Shipment must be delivered FOB origin within 60 days after award, inspected and accepted at destination under firm fixed price with zero variance allowed. Government inspection requirements are waived for QSL-compliant suppliers, and all documentation must reference the correct revisions of technical standards as specified in the Technical Data Package.

General Info

Supply 7075-T6511 aluminum angle stock per strict specs, marked, certified, packaged, and delivered per DLA QSLD requirements within 60 days.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

N/A

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E9-26-Q-0587 for Structural Angle Procurement

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUS
Contacts
Tracey Marcus
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ANGLE,STRUCTURAL RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3) SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD, AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO THIS SOLICITATION.
SPE8E9-26-Q-0587
SECTION B
SUPPLY/SERVICE: 9540-01-426-1232 CONT'D
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S) AS CITED IN THE PURCHASE ORDER TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED BY THE QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED QSLM/QSLD SUPPLIER WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
Technical Characteristics NSN 9540-01-426-1232 FABRICATION METHOD,, EXTRUDED OVERALL HEIGHT,, 1.750 INCHES NOMINAL OVERALL WIDTH,, 1.750 INCHES NOMINAL LENGTH,, 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM LEFT SIDE FLANGE THICKNESS,, 0.080 INCHES NOMINAL BASIC SHAPE STYLE,, ANGLE FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE,, 0.125 INCHES NOMINAL BASE FLANGE THICKNESS,, 0.080 INCHES NOMINAL FIRST TIP RADIUS,, 0.031 INCHES NOMINAL FIRST TIP STYLE,, RIGHT QUARTER RADIUS SECOND TIP RADIUS,, 0.031 INCHES NOMINAL SECOND TIP RELATIONSHIP TO FIRST TIP,, NOT IDENTICAL SECOND TIP STYLE,, UPPER RADIUS LEFT INSIDE ANGLE,, 90.0 DEGREES NOMINAL HEAT TREATMENT,, T-6511 SOLUTION HEAT TREATED MATERIAL,, ALUMINUM ALLOY 7075 MATERIAL DOCUMENT AND CLASSIFICATION,, QQ-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE NONDEFINITIVE SPEC/STD DATA,, 7075 ALLOY AND T6511 TEMPER
TDP Rev A Gen 3 IAW BASIC NON GOVT STD SAE AMS4154S REVISION NR S DTD 11/10/2023 PART PIECE NUMBER: ALLOY 7075 AND TEMPER T6511
TDP Rev A Gen 3 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE NON GOVT STD SAE AMS-QQ-A-200/11A REVISION NR A DTD 10/01/2014
SPE8E9-26-Q-0587
SECTION B
SUPPLY/SERVICE: 9540-01-426-1232 CONT'D
PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE NON GOVT STD UL 498 REVISION NR DTD PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE NON GOVT STD ASTM B666/B666M-20 REVISION NR M DTD 11/01/2020 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE NON GOVT STD ASTM B660-23 REVISION NR DTD 11/01/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 9540-01-426-1232 3.000 FT $ _______________ $ ______________ ANGLE,STRUCTURAL
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 60 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z UNIT CONT:ZZ OPI:A INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N65923
FLEET READINESS CENTER EAST PSC 8021 MCAS CHERRY POINT NC 28533-0021 US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N65923
SPE8E9-26-Q-0587
SECTION B
SUPPLY/SERVICE: 9540-01-426-1232 CONT'D
DLA/FLEET READINESS CENTER EAST BLDG 148 BAY C BEACHEY ROAD CHERRY POINT NC 28533-5040 US
M/F: (TCN) N659236187A225 RDD: 187 PROJ: 705 TP 1 SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 9B ADV: 2N FC: PC
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7017443820 0001 N/A N/A N/A 07/09/2026

SPE8E9-26-Q-0587 NSN/Part Number: 9540-01-426-1232 Quantity: 3 FT Purchase Request: 7017443820QTY: 3 Delivery: 60 days ADO

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 339113
New
DIBBS
Small Business Subcontracting ParticipationCertified small businesses are invited to participate as subcontractors in support of manufacturing, packaging, or logistics activities under a prime contract with the Defense Logistics Agency. This opportunity is aligned with NAICS code 339113 and is intended to facilitate small business involvement in defense-related supply chain operations. The prime contractor is part of the Construction & Equipment MRO SVC I program under the Department of Defense, with performance responsibilities centered at APO 96319-5014. Interested parties must submit their responses by August 14, 2026, following the posting date of August 3, 2026. Participation is structured as a subcontracting opportunity under a federal acquisition vehicle, with no specific set-aside designation stated, but open exclusively to certified small businesses seeking to support critical defense logistics functions.
Surgical Appliance and Supplies Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561990
New
DIBBS
Packaging, Marking, and Shipping of Hazardous MaterialsThe contract requires the proper labeling, marking, and shipping of safety spectacles that contain hazardous materials, ensuring full compliance with federal and Defense Logistics Agency hazardous materials regulations. All work must adhere to strict guidelines governing the handling, identification, and transport of hazardous components, with particular attention to accurate documentation and regulatory alignment throughout the packaging and shipping process. The performance location is designated as APO 96319-5014, indicating operations will support military or defense logistics needs overseas. This is a subcontract under the NAICS code 561990, categorized under the Department of Defense’s Construction & Equipment MRO SVC I, and was posted on August 3, 2026, with a response deadline of August 14, 2026. The solicitation is open to eligible contractors seeking to fulfill specialized logistics requirements tied to hazardous materials handling, with no set-aside designation specified. All participants must demonstrate the capability to meet exacting federal and DLA standards for safety, compliance, and operational integrity in the transport of regulated items.
All Other Support Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339113
New
DIBBS
Supply of Industrial Safety SpectaclesThe contract pertains to the manufacture and delivery of Wiley X model 057V7 safety spectacles, identified by part number 408 and national stock number 4240015107851, with full compliance to military packaging and marking standards. These spectacles are intended for use within defense-related operations and must meet stringent specifications to ensure durability, safety, and interoperability with existing military equipment and protocols. The requirement is issued as a subcontract under the NAICS code 339113, indicating it falls under the manufacturing of other sporting and athletic goods, with a focus on protective gear adapted for military applications. The solicitation was posted on August 3, 2026, with responses due no later than August 14, 2026. The place of performance is designated as APO 96319-5014, aligning with military logistics networks for overseas or deployed personnel. The contracting entity is the Department of Defense, under the organization titled Construction & Equipment MRO SVC I, indicating this requirement supports maintenance, repair, and overhaul operations critical to sustaining fielded equipment and personnel safety. Although no point of contact or set-aside details are provided, the nature of the solicitation and military labeling requirements suggest it is intended for qualified suppliers familiar with defense procurement processes and the unique demands of military-grade protective eyewear.
Surgical Appliance and Supplies Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
LABEL
Solicitation # SPE8E9-26-Q-0641
This contract under solicitation SPE8E9-26-Q-0641 requires the delivery of 6 rolling units, each containing 1,000 units of an item identified by NSN 7690-01-039-2578, with a strict delivery deadline of 90 days after award. The item is designated as a Type I shelf-life item with a non-extendable 120-month (10-year) shelf life, and must be marked in accordance with MIL-STD-129 using special marking code 32. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, explicitly avoiding plastics for wrapping, cushioning, or dunnage wherever possible. The item is a critical application item and must not contain intentionally added mercury or mercury compounds, except for approved functional uses such as in batteries, fluorescent lights, sensors, weapons systems, or specified chemical reagents, with portable mercury-containing items requiring shock-proof construction and a secondary containment barrier. The contract incorporates mandatory technical and quality standards referenced by R and I numbers from the DLA Master List of Technical and Quality Requirements, including Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment and requirements for handling covered defense information. The drawing for the item is available only during open solicitation and must be accessed via the DIBBS portal. All marking, palletization, and shipping must adhere to MIL-STD-129 and RP001, with final delivery addressed to the DLA Distribution facility in New Cumberland, PA. Inspection and acceptance occur at the destination, and there is zero variance allowed in quantity. The government has specified a material need ship date of October 9, 2026, and transportation logistics must follow DLA procedural notes C19 and C20. The contracting office is within the Department of Defense, and inquiries should be directed to the designated point of contact.
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-T-3205
The contract is for the procurement of 476 sheets of aluminum alloy, specifically grade 5052 temper H32, with precise dimensions of 0.063 inches thick, 48 inches wide, and 96 inches long, weighing approximately 28.16 pounds per sheet. All material must conform exactly to the specified dimensions without the use of test coupons, and must be supplied in whole-foot lengths only. The product must satisfy technical requirements referenced in the DLA Master List of Technical and Quality Requirements and must be certified under the Qualified Suppliers List for Distributors (QSLD), meaning only suppliers listed in the QSLD as of June 1994 are eligible to bid or deliver. Any deviation from the QSLD requirement must be explicitly declared by the offeror, and failure to comply may result in criminal penalties for unauthorized substitution. Each unit must be continuously marked with the DLA contract delivery order number, NSN, specification number and revision, alloy, grade, class, type, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions using either stamping (excluding die stamp) or stenciling; markings must be legible, waterproof, stable under normal handling, and applied with non-contaminating fluid. Packaging must follow MIL-STD-2073-1E and Level A requirements of ASTM B660, with preservation method ZZ, and palletization must adhere to DLA packaging standards. Marking for shipment must comply strictly with MIL-STD-129, including the use of special marking code ZZ and inclusion of both units of measure when applicable. A Certificate of Quality Compliance (Mill-Material Certification) is mandatory for every shipment and must be provided to the customer or DLA depot and forwarded to the Contracting Officer. Inspection and acceptance occur at the destination point, governed by FAR 52.246-2, with no supplier inspection waived except under the QSL program. Delivery is required within 17 days after receipt of order, FOB origin, to the designated DLA distribution facility in New Cumberland, Pennsylvania, with a need ship date of August 21, 2026, and an original required delivery date of December 7, 2026. Invoicing must be submitted electronically via WAWF, and all compliance with DFARS clauses regarding cybersecurity, hazardous materials, trafficking in persons, employment verification, and export control are mandatory
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METAL
Solicitation # SPE8E9-26-T-3212
The contract is for the procurement of aluminum alloy metal plate, specifically 0.375 inches thick, 36 inches wide, and 96 inches long, with a reference weight of 126.96 pounds per piece, compliant with SAE AMS4027P Revision P and ASTM B666/B666M-20, identified by NSN 9535-00-495-7813 and alloy grade 6061-T651. Delivery is required within 55 days of order placement, with an original required delivery date of November 15, 2026, and a need ship date of July 13, 2026, to be delivered FOB origin to the DLA Distribution San Joaquin facility in Tracy, California. A minimum quantity of 33 pieces is specified with zero variance allowed, and all plates must be supplied in whole-foot increments with no test coupons permitted. Each unit must be continuously marked with the DLA contract delivery order number, NSN, specification revision, alloy grade, part and die numbers, temper, manufacturer’s name, heat and lot number, and dimensions using only stamping or stenciling methods that are legible, waterproof, stable under normal handling, and non-contaminating. Adhesive labels are required for bars, tubes, and shapes under 0.250 inches nominal OD, while tags are acceptable for wires. Packaging must conform to MIL-STD-2073-1E and Level A requirements of ASTM B660-23, including robust four-corner and side-edge protection with full coverage top and bottom fiberboard or better, and palletization per RP001. Marking must also comply with MIL-STD-129, and preservation uses code ZZ per ASTM B660. A Certificate of Quality Compliance (Mill-Material Certification) is mandatory with every shipment, and a copy must be forwarded to the DLA Troop Support Contracting Officer. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible, and any deviation from this requirement must be explicitly declared, with non-compliance treated as an unauthorized substitution that may incur criminal penalties. The offeror must be a small business as defined under NAICS 331491 with valid socioeconomic certifications, and the contract incorporates numerous DFARS and FAR clauses regarding cybersecurity, hazardous materials
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333998
New
DIBBS
NOZZLE, FIRE EQUIPME
Solicitation # SPE8E9-26-T-3229
This contract is for the procurement of 50 fire hose nozzles, identified by NSN 4210-01-433-4437 and part number 54066N, under solicitation SPE8E9-26-T-3229. The item is classified as a critical application with covered defense information potential, requiring strict compliance with cybersecurity and data safeguarding protocols under DFARS clauses 252.204-7012 and 252.240-7997, mandating adherence to NIST SP 800-171 for protecting controlled unclassified information. Delivery is required within 89 days, with FOB Origin terms and destination inspection and acceptance, shipped to the DLA Distribution San Joaquin warehouse in Tracy, CA. Packaging must conform to MIL-STD-2073-1E with air evacuation preservation, and marking must follow MIL-STD-129 without special identifiers. Palletization and hazardous material handling comply with DLA’s RP001 and IP025 directives, and mercury or mercury-containing compounds are strictly prohibited unless exempted, such as in batteries, fluorescent lamps, or specific instrument controls, which must include a secondary containment per NAVSEA 5100-003D. The contract enforces full compliance with the DLA Master List of Technical and Quality Requirements and prohibits intentional introduction of hazardous substances, with safety data sheets and hazard labeling required under OSHA’s Hazard Communication Standard. All invoicing must be processed via WAWF, and offerors must submit current UEI and CAGE codes while certifying their small business status and compliance with trafficking, employment eligibility, and sustainable product requirements. The solicitation includes mandatory clauses on whistleblower rights, cybersecurity reporting, procurement integrity, and restrictions on covered defense telecommunications equipment, with proposals due electronically via DIBBS by August 3, 2026. Pricing is not fully disclosed, and the contract type is unspecified, though the structure suggests a fixed-price award under simplified acquisition rules.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E9-26-T-3240
The contract pertains to the procurement of Marker, Identification, identified by NSN 7690012406572 and part number SL18 from American Labelmark Company, classified as a commercial item of a type. Six routing units (RO), each containing 500 units, are required and must be delivered within five days of order placement FOB origin, with inspection and acceptance occurring at the destination location, Tinker Air Force Base, Oklahoma. The item carries a non-extendable 12-month shelf life from the cure date, with a mandatory requirement that at least 85% of the shelf life remain at delivery. All labeling and markings must strictly comply with MIL-STD-129, including the display of cure and expiration dates in calendar quarter and year format, and the use of Special Marking Code 32 for Type I shelf-life items. Packaging must adhere to MIL-STD-2073-1E using Packaging Code U, with cold/dry preservation method applied. The use of plastic for wrapping, cushioning, or dunnage is to be avoided where feasible. Barcoding is required under MIL-STD-129, and the item is subject to safeguarding requirements under FAR 52.223-23, 52.223-3, and 52.240-93, including the handling of covered defense information. The solicitation is issued under SPE8E9-26-T-3240 with a response deadline of August 6, 2026, and must be submitted via the DIBBS portal. Payment must be processed through WAWF using the DD 1155 form, and invoicing information is directed to the designated DoDAAC. The item is designated as a critical application item, and the contractor must comply with all applicable clauses including employment eligibility verification, combating human trafficking, sustainable products, hazardous material identification, and cybersecurity safeguards. No unit price is provided in the CLIN, and no evaluation factors are specified in the solicitation, indicating a simplified acquisition under commercial item procedures. All deliverables must conform to referenced military standards, and any deviation from these requirements may result in rejection.
Books Printing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 331110
New
DIBBS
PLATE, METAL
Solicitation # SPE8E9-26-T-3200
The contract specifies the procurement of corrosion-resistant metal steel plates meeting ASTM A240 Class 316L standards, with a thickness of 0.500 inches, width of 72 inches, length of 240 inches, and a reference weight of 2505.6 pounds per piece. The material must be hot rolled, annealed, and either sand blasted or pickled overall, delivered in whole-foot lengths only, and fully compliant with the Technical Data Package Rev B Gen 2, which incorporates referenced standards including MIL-STD-129R(3), ASTM A700-14, and SAE AMS2807C. All units must be permanently and legibly marked with the DLA contract delivery order number, NSN, specification revision, alloy designation, manufacturer’s name, heat and lot number, and dimensions using stenciling or stamping methods that do not contaminate the material. Markings must be waterproof, stable under normal handling, and applied both directly to the plate and on vinyl or plastic-coated pressure-sensitive labels. Each shipment must include a Certificate of Quality Compliance (Mill-Material Certification) delivered to the customer or DLA depot and forwarded to the Contracting Officer. Supply is restricted to vendors listed on the DLA Qualified Suppliers List for Distributors (QSLD); only approved distributors may supply the product, and deviations require explicit notification. Suppliers not on the QSLD are ineligible for award, and noncompliance may result in criminal penalties. The QSL program waives source inspection requirements for qualified suppliers, relieving obligations under RQ006, COQC, PVT, QAP-EQ003, and ASQ H1331. Packaging must strictly adhere to MIL-STD-2073-1E with packaging code U, preservation method ZZ as defined in ASTM A700, and palletization per RP001. Container requirements include robust four-corner protection, full-side edge coverage, and fiberboard or better top and bottom protection. Marking and packaging use special codes Z and ZZ that reference ASTM A700, and shipments must indicate both units of measure if applicable (e.g., FT-LB). Deliveries are FOB origin with a 167-day delivery window, final inspection and acceptance occurring at destination, and electronic invoicing mandatory through WAWF. Two distinct delivery locations are designated—Tracy, California and New Cumberland, Pennsylvania
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333120
New
DIBBS
PAD, ANGLED UMC
Solicitation # SPE8E9-26-T-3221
The contract pertains to the procurement of 634 units of PAD, ANGLED UMC with NSN 1740016179491 under solicitation SPE8E9-26-T-3221, issued by the Department of Defense through the Construction & Equipment MRO SVC I office. Delivery is required within 167 days after order, with an original required delivery date of November 13, 2026, and a need ship date of January 18, 2027. All items must be shipped FOB origin to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, under the First Destination Transportation program. Inspection and acceptance occur at the destination, with no tolerance for quantity variance. Packaging must conform to ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which takes precedence, and all packaging and labeling must follow MIL-STD-129 standards, including palletization per RP001. Bar-coding and marking requirements are governed by MIL-STD-129, and hazardous materials must comply with OSHA’s Hazard Communication Standard and DFARS 252.223-7001. Radioactive materials exceeding specified thresholds must be clearly marked per MIL-STD-129. The unit of issue is each, and pricing details are not finalized in the solicitation, with offerors expected to submit bids for a fixed-price contract. Electronic invoicing is mandatory through Wide Area WorkFlow, and all submissions must be made via the DIBBS portal by the deadline of August 3, 2026. Contractors must affirm their size and socioeconomic status, including small business status if applicable, and disclose UEI and CAGE codes if providing covered defense telecommunications equipment or services. Compliance with clauses covering workplace safety, trafficking in persons, employment eligibility verification, sustainable products, cybersecurity, whistleblower protections, and compensation restrictions for former DoD officials is required. No security clearances or key personnel designations are specified, and no options or contract modifications are outlined. The contract includes no formal attachments but references multiple military and industry standards as controlling requirements.
Construction Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339115
New
DIBBS
SPECTACLES, INDUSTRIAL
Solicitation # SPE8E9-26-T-3277
The contract is for the procurement of industrial safety spectacles under NSN 4240-01-510-7851, with a quantity of ten units, issued by the Department of Defense through the DLA under solicitation SPE8E9-26-T-3277. The supplier, Wiley X, Inc., must deliver the product FOB destination within twenty days of the contract award, with no tolerance for quantity variance. Packaging and marking must comply strictly with MIL-STD-2073-1E and MIL-STD-129, and palletization must adhere to DLA packaging requirements. The delivery address is in APO, AP, while the freight shipping destination is Misawa Air Base in Japan, with transportation details governed by DLA procedural notes. The product is subject to technical and quality requirements referenced in the DLA Master List, and the contract includes provisions for the removal of government identification from non-accepted supplies and applies to covered defense information. The unit price is $10.00 per unit, with a total contract value of $100.00. The original required delivery date is August 5, 2026, and the solicitation response deadline is August 14, 2026. This is a federal procurement under NAICS code 339115, with primary point of contact Matthew Kruc, and is managed through the DLA’s eProcurement system.
Ophthalmic Goods Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331221
New
DIBBS
PLATE, METAL
Solicitation # SPE8E9-26-T-3208
The contract solicitation SPE8E9-26-T-3208 seeks the procurement of structural carbon steel hot rolled plates measuring 0.250 inches thick, 48 inches wide, and 96 inches long, with a reference weight of 326.7 pounds per piece. The material must conform to ASTM A36/A36M-19 and additional specifications including ASTM A6/A6M-24B, MIL-STD-129R(3), ASTM A700-14, and SAE AMS2807C, with strict dimensional compliance enforced—no test coupons are permitted, and all plates must be supplied in whole-foot lengths. Each unit must be permanently marked with the DLA contract delivery order number, NSN, specification number and revision, grade, class, type, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions using stamping or stenciling methods that are legible, waterproof, and non-contaminating; vinyl or plastic-coated pressure-sensitive labels are authorized for specific shipments, and secured lifts must be marked on each end. A Certificate of Quality Compliance, or mill-material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer, with CDRL-METALSCERT governing documentation requirements. Packaging must adhere to MIL-STD-2073-1E using preservation method ZZ in accordance with ASTM A700, with palletization following DLA Packaging Requirements for Procurement (RP001). Marking and labeling must comply with MIL-STD-129, including special handling for dual-unit shipments, and preservation materials, wraps, and containers must be designated as ZZ. Delivery is FOB origin with a 56-day delivery window, inspection and acceptance occur at destination, and shipment must be sent to specified DLA depots in Tinker AFB, Oklahoma, or Tracy, California. The contract is subject to the Qualified Suppliers List for Distributors (QSLD) requirement, limiting eligibility to suppliers listed on the QSLD; non-compliant bids constitute an exception and may be rejected as unauthorized substitutions, with potential criminal penalties for violations. This is a critical application item, and no deviations are permitted in material sourcing or quality conformance. The solicitation includes mandatory Federal Acquisition Regulation clauses covering equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, cybersecurity compliance, safeguard
Rolled Steel Shape Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details