ANGLE, STRUCTURAL

Structural steel angles measuring 2.000 inches in height and 3.000 inches in width with a 0.250-inch flange thickness are required in lengths between 10 and 12 feet, delivered in whole-foot increments only, with a reference weight of 4.1 pounds per foot, conforming to ASTM A6 Table A2.8 for unequal leg shapes and manufactured to MIL-S-22698C. All material must originate from an approved steel mill and carry an ABS Surveyor’s endorsement on certification documents, adhering to the American Bureau of Shipping Rules for Building and Classing Steel Vessels, Part 2, Section 1 with Appendix 2/D; any non-compliant substitution is prohibited. Material must be permanently marked with a continuous identification that includes the DLA contract delivery order number, NSN 9520-00-277-7308, specification and revision, grade class and type, alloy, part number, die number, temper, manufacturer name, heat and lot number, and dimensions. Marking must be done via stamping or stenciling, excluding die stamp, using waterproof, legible, and stable inks or prints visible to the unaided eye; for items under 0.250 inches nominal OD, adhesive labels are mandatory. Packaging must comply with MIL-STD-2073-1E, using preservation method code 10 (CLNG/DRY), with special packaging codes Z and ZZ applied as per ASTM A700, and palletization must follow DLA packaging requirements. Shipment markings on dual-unit items must indicate quantities for both units, and all deliveries must be FOB Origin to the destination address in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the delivery point. The requirement for Quality Conformance Inspection is waived for suppliers listed on the Qualified Suppliers List for Distributors (QSLD), and only QSLD-listed suppliers are eligible for award; non-compliance constitutes an unauthorized substitution with potential criminal penalties. A Certificate of Quality Compliance must accompany every shipment, and a copy must be forwarded to the DLA Troop Support Contracting Officer. The product is designated as a critical application item and must meet the technical performance parameters specified in the Technical Data Package aligned with MIL-S-22698C, ASTM A6/A6M-24B, MIL-STD-129R,