Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ANGLE, STRUCTURAL

Active
SPE7M2-26-T-6018Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of structural angle steel with a flange thickness of 0.250 inch, an overall width and height of 1.250 inches, and a 90-degree angle configuration. The material must be supplied in whole-foot lengths between 20 and 30 feet, with square ends and a reference weight of 1.92 pounds per foot. The product must comply with ASTM A36/A36M-19 specifications and is classified as a critical application item. All units must be identified with mandatory markings including the DLA contract delivery order number, NSN, specification revision, grade, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material; adhesive labels are required for units under 0.250 inch nominal OD, and tags are acceptable for wire. Packaging must follow MIL-STD-2073-1E and RP001 requirements, with no mercury or mercury compounds permitted in preservation, packaging, or labeling except for specific functional uses exempted by NAVSEA guidance. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to receive award under this solicitation, and any deviation from this requirement must be explicitly declared. The QSL program waives source inspection, COQC, PVT, QAP-EQ003, ASQ H1331, and RQ006 requirements for qualified suppliers, provided the product fully complies with the program’s terms. Non-compliance risks rejection of the product and potential criminal penalties for unauthorized substitutions. Material certification must be provided per CDRL-METALSCERT requirements, and the full technical and quality requirements are governed by the DLA Master List. The total quantity ordered is 2,992 feet, to be delivered FOB origin to Tracy, CA, within 202 days from award date. The contract allows for a 10% variance in quantity, with acceptance and inspection occurring at destination, and shipping must adhere to MIL-STD-129 marking standards with no special marking codes applied.

General Info

Procure 2,992 feet of ASTM A36 angle steel, 1.25x1.25x0.25 inch, 20–30 ft, marked and packed per MIL-STD, delivered FOB origin to Tracy, CA.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

332111 - Iron and Steel ForgingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M2-26-T-6018 for DLA Land and Maritime Nuclear Reactor Program

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ANGLE,STRUCTURAL
ANGLE,STRUCTURAL
0.250 INCH FLANGE THICKNESS.
1.250 INCH OVERALL WIDTH AND HEIGHT.
90.0 DEGREE ANGLE.
20 TO 30 FEET LENGHTS.
SQUARE ENDS.
1.92 LB/FT (REF).
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ015: QUALIFIED SUPPLIERS LIST FOR MANUFACTURERS (QSLM)/QUALIFIED
SUPPLIERS LIST FOR DISTRIBUTORS FOR
TROOP SUPPORT
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
SPE7M2-26-T-6018
SECTION B
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS
SPE7M2-26-T-6018
SECTION B
FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD ASTM A36/A36M-19 REVISION NR DTD 07/01/2019 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017685052 0001 FT 2,992.000
NSN/MATERIAL:9520002774901
DELIVERY (IN DAYS):0202
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:D3 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
SPECIAL PACKAGING CODES Z AND ZZ SHALL BE AS SPECIFIED IN ASTM A700.
VINYL OR PLASTIC COATED PRESSURE SENSITIVE LABELS ARE AUTHORIZED FOR ALL
MARKING ON STRUCTURAL SHAPES, PIECES SHIPPED LOOSE OR BANDED SECURED
LIFTS. SECURED LIFTS SHALL BE IDENTIFIED ON EACH END.
ADDITIONAL MARKING REQUIREMENTS: WHEN THE
CONTRACT OR ORDER REFLECTS TWO UNITS
SPE7M2-26-T-6018
SECTION B
PR: 7017685052 PRLI: 0001 CONT’D
(EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.)
SHIPMENT MARKINGS SHALL INCLUDE THE
QUANTITY OF BOTH UNITS. THIS MARKING
DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:03/08/2027 Original Required Delivery Date:03/27/2027
SPE7M2-26-T-6018 NSN/Part Number: 9520-00-277-4901 Quantity: 2,992 FT Purchase Request: 7017685052QTY: 2992 Delivery: 202 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332111
New
DIBBS
CHANNEL, STRUCTURAL
Solicitation # SPE8E4-26-T-1964
The contract specifies the procurement of a structural steel channel made from ASTM A36 steel, with exact dimensional specifications of 1.50 by 2.50 inches, identified by part number 12442180. The finish requires zinc plating per ASTM B633, category SC4 (Fe/Zn 25), type VI, with a prime coating conforming to MIL-DTL-53030 or MIL-PRF-32348, adhering to dry film thickness standards under MIL-DTL-53072, followed by a topcoat compliant with MIL-PRF-22750, type II, in color #24533 semigloss green. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to solicitations or amendments. The product must conform to MIL-STD-130N for identification marking and be manufactured under an ISO 9001:2008 Quality Management System. A Certificate of Conformance and quality compliance documentation are mandatory, with CDRLs and DD Form 1423s required for delivery verification. The contract calls for 11 units to be delivered FOB origin within 182 days, with zero variance permitted in quantity. Inspection and acceptance occur at the destination point, specifically the DLA Distribution Red River facility in Texarkana, Texas. Packaging must comply with ASTM D3951, prioritized by DLA Master List requirements, and all units must be labeled and palletized per MIL-STD-129 and RP001 packaging standards. The unit of issue is each (EA), priced at $11.00 per unit, with total contract value of $121.00. The NSN for the item is 9520-01-540-5600, and the original delivery requirement was June 3, 2027, with a need ship date of August 5, 2026. The contract is subject to federal acquisition regulations, including FAR 52.246-15 and higher-level quality requirements, and solicitation details are accessible via DIBBS. The contract falls under NAICS code 332111 and is managed by the Department of Defense through the Red River Receiving Building, with Pamela Duff
RED RIVER RECEIVING BLDG

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2003
The contract specifies the procurement of cold drawn, normalized, flat steel bar material composed of SAE 4130 alloy, with a thickness of 1.000 inch, width of 2.000 inches, and length between 10 and 12 feet in whole-foot increments only, with a reference weight of 6.800 pounds per foot. The material must be supplied with a Certificate of Quality Compliance, including mill certification, provided with every shipment and forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are mandated on each unit, including the DLA delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions, applied via stamping or stenciling that must be legible, waterproof, and non-contaminating. Adhesive labels are required for bars under 0.250 inches in nominal OD. Packaging must follow MIL-STD-2073-1E and DLA packaging requirements, with special codes Z and ZZ per ASTM A700, and marking in compliance with MIL-STD-129. The NSN is 9510-00-640-4974, quantity is 75 feet, unit price is $75.00 per foot for a total of $5,625, with delivery required within 153 days FOB origin to Tinker AFB, Oklahoma. Quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements and referenced standards such as SAE AMS-S-6758B and SAE AMS2806. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible; deviations must be explicitly declared, and non-compliant submissions constitute unauthorized substitutions with potential criminal penalties. Shipments must include both units of measure when specified, and the requirement to provide CDRL-METALSCERT-26124 documentation is binding. Source inspection is waived for QSLD-compliant suppliers, eliminating the need for additional quality conformance inspections under referenced protocols.
DEPOT OKLAHOMA

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-13UR
This contract specifies the procurement of 243 machine bolts identified by NSN 5306-01-535-2413 and part number AN4C45A, classified as a commercial item defined by consensus non-government standards under NASM3 through NASM20 Revision 5 dated 02/28/2025. The item must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with verification governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect sampling unless otherwise mandated. All Class 3A and 3B threads must be gaged in accordance with SAE AS8879 Category 1 or MIL-S-7742 safety-critical standards, excluding self-locking nuts and threads below specified diameters. Identification markings must follow MIL-STD-130N paragraph 4.1.b(2), supplemented by standard manufacturer and material marks. The hardware must be manufactured to the current revision of the governing standard at the time of production, with prior revisions acceptable only if they were current when the item was made. Packaging and labeling requirements mandate compliance with ASTM D3951, but are subordinate to DLA Master List provisions, requiring all packaging to be marked and labeled per MIL-STD-129 with unit of issue and quantity per unit pack as specified. Palletization must adhere to DLA Packaging Requirements for Procurement. The delivery is FOB origin with a 156-day lead time, and the item must be delivered by January 17, 2027, with no tolerance for quantity variance. Inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania, with all shipping details directed to the DLA Distribution Center. The contract references DLA Procurement Notes C19 and C20 for freight and first-destination transportation protocols, and the point of contact for inquiries is Sommer Yates with the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E9-26-T-3379
This procurement contract specifies the supply of carbon steel bars meeting ASTM A108 Grade 1045 cold drawn specifications, with a diameter of 1 inch and lengths of 10 to 12 feet in whole-foot increments only. Each shipment must include a Certificate of Quality Compliance (Mill-Material Certification) delivered to the customer or DLA depot, with a copy forwarded to the DLA Troop Support Contracting Officer. Mandatory continuous identification markings are required on every unit, including the DLA contract delivery order number, NSN, specification revision, grade, manufacturer's heat and lot number, and dimensions, applied via stamping or stenciling using waterproof, non-contaminating ink that remains legible under normal handling. Adhesive labels are required for bars under 0.250 inches nominal OD, while tags are acceptable for wire, and failure to comply will result in rejection. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking codes Z and ZZ as defined by ASTM A700, and palletization must follow DLA packaging requirements. The material is designated as a Critical Application Item, and all deliveries are FOB origin with a 10% quantity variance allowance, inspected and accepted at destination. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award under this solicitation; any deviation from this requirement must be explicitly noted. Non-compliant bids are considered unauthorized substitutions and may incur criminal penalties. The contract waives source inspection requirements for qualified QSLD suppliers, relieving them of obligations under COQC, PVT, QAP-EQ003, ASQ H1331, and RQ006. Two line items are specified: 2 feet and 651 feet, both with the same NSN and delivery terms, with a total quantity of 653 feet to be shipped by January 18, 2027, against an original required delivery date of November 21, 2026. Delivery is directed to two DLA facilities in New Cumberland, PA, and Tracy, CA, with transportation governed by DLAD Procurement Notes C19 and C20. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2008
Steel bar material compliant with specification 4130, cold finished and normalized, is required in a 0.500 inch diameter and 10 to 12 foot length, delivered in whole foot increments only, with a reference weight of 0.668 pounds per foot. This item is designated as a critical application product and must fully conform to technical standards including SAE AMS-S-6758B, MIL-STD-129R, ASTM A700-14, and SAE AMS2806. Each unit must carry continuous identification markings that include the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer name, heat and lot number, and dimensions, applied via stamping or stenciling in a legible, waterproof, and durable manner. Adhesive labels are required for bars under 0.250 inches in diameter and tags for wire. Certification of quality compliance, including mill material data, must accompany every shipment and be submitted to the DLA Troop Support Contracting Officer. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond; any deviation from this requirement must be explicitly noted and constitutes an exception. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with preservation methods in accordance with ASTM A700 and special codes Z and ZZ. Marking and labeling shall fully comply with MIL-STD-129, including the use of vinyl or plastic-coated pressure-sensitive labels where authorized. The delivery is FOB origin, with inspection and acceptance occurring at destination, within a 64-day timeline, with a 10% variance in quantity permitted. The product is subject to defense information controls and all applicable DLA technical and quality requirements referenced through the DLA Master List. Supply chain compliance, material origin, and certification are strictly enforced, with noncompliance potentially resulting in rejection of goods and criminal penalties.
DEPOT OKLAHOMA

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
HEAD, SAFETY, PRESSURE R
Solicitation # SPE8E6-26-T-4003
The contract pertains to the procurement of a commercial item identified as HEAD, SAFETY, PRESSURE RELIEF with NSN 4820011548123 and part number 03787 from AMEREX CORPORATION, for a quantity of 89 units at a unit price of $89.00, totaling $7,921.00. Delivery is required within seven days of award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance will occur at the destination. All packaging must comply with ASTM D3951 as superseded by applicable DLA Master List of Technical and Quality Requirements, with labeling and marking strictly following MIL-STD-129, and palletization adhering to RP001 DLA Packaging Requirements. The item is subject to Defense Logistics Agency regulations governing commercial items, including provisions for the removal of government identification from non-accepted supplies. The required delivery date is October 18, 2026, with a need ship date of August 25, 2026. Shipping must follow DLAD Proc Notes C19 and C20, and the deliver-to address is DLA Distribution Depot Hill at Hill Air Force Base, Utah, with the contract reference SPE8E6-26-T-4003. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332111, and is managed by the Department of Defense through Depot Hill.
DEPOT HILL

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A6-26-T-13HQ
The contract is for 28 straight headless pins with NSN 5315-01-225-0667 and is issued under solicitation SPE4A6-26-T-13HQ by the Defense Logistics Agency’s ASC Commodities Division. The delivery deadline is 142 days after award, and responses are due by August 13, 2026. The item is subject to stringent quality and packaging requirements outlined in the DLA Master List of Technical and Quality Requirements, which governs all referenced R and I numbers. Critical item source inspection is mandatory, and all sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stated; unspecified attributes are treated as major with a verification level of IV or an AQL of 1.0. Physical identification and bare item marking are required, and the item’s technical data is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048. Access to controlled technical data is limited to contractors with approved US/Canada Joint Certification Program status, valid DOD export control training, and DLA authorization. The place of performance is New Cumberland, PA, and the NAICS code is 332111 for metal forgings and stampings, indicating the supplier must meet federal procurement standards for this precision component.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1979
The contract specifies the procurement of 76 linear feet of annealed, round steel bar with a 4.500 inch diameter and a weight of 54.07 pounds per foot, supplied in whole-foot lengths of 10 to 12 feet. The material must conform to Steel Composition 304 and meet technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including MIL-STD-129R for marking, ASTM A700-14 for preservation and packing, SAE AMS-QQ-S-763D for material spec, and SAE AMS2806 for certification. A Certificate of Quality Compliance, or mill material certification, is mandatory for every shipment and must accompany the product and be forwarded to the DLA Troop Support Contracting Officer. Each unit must carry continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s heat and lot number, and dimensions, with permitted marking methods limited to stenciling or stamping using non-contaminating, waterproof fluid that remains legible under normal handling. Adhesive labels are required for bars under 0.250 inches nominal OD, and tags are acceptable for wire. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, with special codes Z and ZZ applied as per ASTM A700. Shipments must be palletized and marked in accordance with the contract’s special marking requirements, including dual unit quantities when applicable. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid on this contract, and any deviation from QSLD requirements must be explicitly declared; non-compliance may result in rejection or criminal penalties for unauthorized substitution. References to government inspections, including COQC and QAP-EQ003, are waived for QSLD-compliant suppliers. The product is designated under NSN 9510-00-189-0606 and is to be delivered FOB origin to DLA Dist San Joaquin in Tracy, CA, 139 days from the contract award, with a permitted quantity variance of plus or minus 10 percent. Inspection and acceptance occur at destination. The shipment must be delivered by January 4, 2027, to meet the original requirement date of November 21, 2026. Packaging
DLA DIST SAN JOAQUIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1948
The contract specifies the procurement of steel bar material classified as COMP 302, supplied in hot rolled hexagonal shape, annealed condition, with a width of 0.625 inches across flats and lengths ranging between 8 and 12 feet, sold by the foot at a reference weight of 1.150 pounds per foot. The material must be supplied in whole-foot increments only and meet exact dimensional tolerances. Comprehensive quality and technical requirements are mandated under the DLA Master List of Technical and Quality Requirements, with certifications including a Certificate of Quality Compliance Mill-Material Certification required for every shipment, to be provided to both the customer and the DLA Troop Support Contracting Officer. Continuous identification markings are mandatory on each unit including the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer's heat and lot number, and dimensions. Marking methods are restricted to stenciling or approved stamping, with labeling using waterproof, non-contaminating inks. Adhesive labels are required for bars under 0.250 inches in nominal outer diameter, and tags are acceptable for wire. All suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award, and any deviation from this requirement must be explicitly declared, with noncompliance treated as an unauthorized substitution potentially subject to criminal penalties. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with preservation and marking governed by ASTM A700 and MIL-STD-129R, including special codes Z and ZZ for preservation and marking. Labels must be secure, legible, and resistant to handling, with additional marking rules applying when shipments involve dual units of measure. Delivery is FOB origin, with inspection and acceptance occurring at destination, under a 167-day delivery schedule with a 10% quantity variance allowance. The NSN is 9510-00-265-1650, with a total quantity of 54 feet and a unit price of $54.00 per foot, shipped to the DLA Distribution facility in New Cumberland, PA. All documentation referenced in the Technical Data Package including CDRL-METALSCERT, SAE AMS-S-7720B, ASTM A700-14, and MIL-STD-129R govern compliance, and QSL program waivers apply for qualified suppliers,
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1951
The contract specifies the procurement of 30 feet of steel bar, composed of grade 303 stainless steel, in a cold-finished hexagon shape with an annealed temper, measuring 0.875 inches across flats and supplied in whole-foot lengths of 10, 11, or 12 feet, with a reference weight of 2.307 pounds per foot. Material must comply with ASTM A582/A582M and SAE AMS2806 standards, and a Certificate of Quality Compliance, also known as a mill-material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. All units must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stenciling or adhesive labels; stamping is permitted except for die stamping, and marking fluids must not contaminate the product. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with special labeling codes Z and ZZ per ASTM A700, and palletization must adhere to DLA packaging rules. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and a 10% variance in quantity is allowed. The item is designated under NSN 9510-00-293-5009 and must be delivered by February 1, 2027, to the DLA Distribution facility in New Cumberland, Pennsylvania. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and non-compliance constitutes an unauthorized substitution with potential criminal penalties. The contract waives source inspection requirements for qualified suppliers, and CDRL-METALSCERT documentation must be provided if not already available in the DLA system.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-13EU
The contract pertains to the procurement of 28 sleeve bearings with NSN 3120-01-075-2046 under solicitation SPE4A6-26-T-13EU, issued by the Defense Logistics Agency's ASC Commodities Division. Delivery is required within 128 days after order, with performance located in Tracy, California. The item is subject to strict quality control requirements, mandating sampling per MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise stipulated. Critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0, with unspecified attributes treated as major. Measuring and test equipment must meet approved standards, and the manufacturer is expected to comply with all applicable quality assurance provisions. The technical data associated with this item is controlled under export regulations—either ITAR or EAR—and may not be disclosed to foreign persons, including those within the United States, without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs access, and only DLA contractors with approved US/Canada Joint Certification Program status, who have completed mandatory training and questionnaire requirements, are permitted to handle the data. The contractor must also be certified under CMMC Level 2 by a C3PAO, and all covered defense information is subject to cybersecurity protections as defined by RD002. The contract was posted on August 5, 2026, with bids due August 13, 2026, under NAICS code 332111 for Federal procurement.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
ANGLE, STRUCTURAL
Solicitation # SPE8E4-26-T-1984
Structural steel angles meeting ASTM A6 Table A2.8 specifications for unequal legs are required, with an overall height of 2.000 inches, width of 3.000 inches, and a flange thickness of 0.250 inches. The material must be produced from Grade A rolled steel, rated at approximately 4.1 pounds per foot, and supplied in whole-foot lengths between 10 and 12 feet. All material must conform to the American Bureau of Shipping’s Rules for Building and Classing Steel Vessels, Part 2, Section 1, with supplementary requirements from Appendix 2/D, and must originate from an approved steel mill. Continuous identification markings are mandatory, including the DLA contract delivery order number, NSN, specification revision, grade, manufacturer’s name, heat and lot number, dimensions, and other specified data, applied via stamping or stenciling in legible, waterproof, non-contaminating form. Each shipment must include a Certificate of Quality Compliance and adhere to MIL-STD-129R marking standards with preservation methods specified in ASTM A700. The product is designated a critical application item and is subject to the Qualified Suppliers List for Distributors requirement, restricting procurement to approved QSLD suppliers only; non-compliant bids are considered deviations and subject to penalties. The material must also bear the “AB” marking per MIL-S-22698 and include an ABS surveyor’s endorsement on all certifications. Packaging must follow DLA’s RP001 and MIL-STD-2073-1E guidelines, with palletization and shipping directed to the DDSP New Cumberland facility. Delivery is due within 83 days of contract award, with a required ship date of November 9, 2026, and a quantity of 962 linear feet, subject to a plus or minus 10 percent variance. Cybersecurity Maturity Model Certification Level 2 self-assessment and handling of covered defense information are required. All technical and quality requirements referenced under RA001, RD002, RD004, and RQ011 are incorporated by reference from the DLA Master List.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 332312
New
DIBBS
Structural Steel FabricationThe contract titled Structural Steel Fabrication is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and falls under the NAICS code 332312 for structural metal fabrication. It requires the fabrication of structural steel members including beams, columns, and connections strictly in accordance with specified design requirements. The solicitation was posted on August 5, 2026, with a response deadline of August 14, 2026, and the work is to be performed at a location in San Diego with the ZIP code 92136-3581. The contracting activity is associated with the Nuclear Reactor Program under the Department of Defense, and the procurement is accessible through the DIBBS platform for eligible small business contractors to respond.
Fabricated Structural Metal Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 327320
New
DIBBS
Ready-Mix Concrete SupplyThe contract titled Ready-Mix Concrete Supply is a small business set-aside solicitation under the SBA Total Small Business Set-Aside program, designated for NAICS code 327320 which pertains to concrete product manufacturing. It requires the production and on-site delivery of specific concrete mixes as needed for construction activities within the designated performance location in San Diego, California, with ZIP code 92136-3581. The opportunity is issued by the Nuclear Reactor Program under the Department of Defense and is structured as a subcontract. The solicitation was posted on August 5, 2026, with responses due by August 14, 2026. All offerors must be certified small businesses eligible under the set-aside guidelines, and performance is confined to the specified site where the concrete materials must be properly placed and integrated into ongoing infrastructure or facility work.
Ready-Mix Concrete Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 484220
New
DIBBS
Freight and Heavy Haul TruckingThis contract is for the transportation of oversized and heavy construction equipment and materials to a designated site in San Diego, California, under a Small Business Set-Aside designation, meaning only qualifying small businesses are eligible to bid. The solicitation falls under NAICS code 484220, which covers specialized freight trucking services, and is classified as a subcontract within the Department of Defense’s Nuclear Reactor Program. The opportunity was posted on August 5, 2026, with a response deadline of August 14, 2026, and the place of performance is specified as 92136-3581 in San Diego. Bidders must meet federal small business size standards and be prepared to handle logistics for large, non-standard cargo requiring specialized hauling capabilities, with all operations centered on delivering critical components to the designated location in support of defense-related infrastructure projects.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541620
New
DIBBS
Environmental Remediation ServicesThe contract titled Environmental Remediation Services seeks subcontracting support for soil and groundwater assessment, hazardous material abatement planning, and regulatory compliance activities associated with nuclear reactor program operations. It is issued under a Total Small Business Set-Aside as defined by FAR 19.5, ensuring eligibility is restricted to small business concerns certified by the Small Business Administration. The North American Industry Classification System code 541620 identifies the scope as environmental consulting and remediation services, requiring specialized technical expertise in contaminant characterization, remediation strategy development, and adherence to federal and state environmental regulations. The performance location is designated as San Diego, California, with a zip code of 92136-3581, indicating the work will be conducted at or near a Department of Defense facility involved in nuclear reactor operations. The solicitation was posted on August 5, 2026, with proposals due by August 14, 2026, and interested parties must respond through the DIBBS platform using the reference number SPE7M226Q0723.
Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Site LayoutThe contract titled Surveying and Site Layout is a small business set-aside subcontract under the NAICS code 541370, reserved exclusively for small businesses as defined by the SBA. It was posted on August 5, 2026, with a response deadline of August 14, 2026, and is administered by the Nuclear Reactor Program under the Department of Defense. The work requires comprehensive topographic surveys, boundary verification, and precise stakeout services to support construction layout activities. All services must be performed at the designated place of performance in San Diego, California, with the postal code 92136-3581. The solicitation is accessible via the DIBBS portal, and all submissions must comply with the terms of a total small business set-aside under FAR 19.5, ensuring that only eligible small business entities may bid or perform under this agreement.
Surveying and Mapping (except Geophysical) Services

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 237310
New
DIBBS
Paving and Asphalt WorkThe contract involves grading, base preparation, and asphalt paving for roads, parking lots, or airfields under a Total Small Business Set-Aside, restricted exclusively to small businesses as defined by the SBA. It is classified under NAICS code 237310 and issued by the Department of Defense under the Nuclear Reactor Program, with performance required in San Diego, California, specifically at ZIP code 92136-3581. The solicitation was posted on August 5, 2026, and responses are due by August 14, 2026. This is a subcontract opportunity, meaning the winning entity will be working under a prime contractor rather than directly with the government. The project demands precision in site preparation and paving to meet military or defense infrastructure standards, and bidders must be certified small business concerns eligible under FAR 19.5.
Highway, Street, and Bridge Construction

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 238110
New
DIBBS
Concrete Formwork and PlacementThe contract titled Concrete Formwork and Placement involves the full scope of activities related to forming, reinforcing, pouring, and finishing both structural and architectural concrete elements for a project under the Nuclear Reactor Program within the Department of Defense. It is issued as a subcontract with a Total Small Business Set-Aside designation, meaning only small businesses as defined by the Small Business Administration are eligible to respond. The North American Industry Classification System code 238110 applies, indicating a classification within the concrete work specialty trade. Performance of the work is required at a site in San Diego, California, with a zip code of 92136-3581. The solicitation was posted on August 5, 2026, and responses must be submitted by August 14, 2026, with no point of contact specified. The opportunity is accessible through the DIBBS platform via a public link for interested contractors.
Poured Concrete Foundation and Structure Contractors

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping SystemsThe contract is for the installation of potable water, sanitary sewer, and storm drainage systems within buildings or facilities under a subcontract arrangement set aside entirely for small businesses as defined by the SBA. It falls under NAICS code 238220 for plumbing, heating, and air-conditioning contractors and is managed by the Nuclear Reactor Program within the Department of Defense. The opportunity was posted on August 5, 2026, with responses due by August 14, 2026, and performance is required at a location in San Diego, California with a zip code of 92136-3581. All work must comply with applicable standards for municipal infrastructure systems and is intended to support critical defense facilities. The solicitation is accessible through the DIBBS platform for eligible small business contractors.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 561730
New
DIBBS
Erosion and Sediment ControlThe contract pertains to erosion and sediment control measures required during construction activities, specifically involving the installation of silt fences, erosion blankets, and other stormwater management systems. It is issued as a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 561730 indicating it falls under waste collection and treatment services. The solicitation was posted on August 5, 2026, with responses due by August 14, 2026, and is managed by the Nuclear Reactor Program under the Department of Defense. All work must be performed at the designated location in San Diego, California, with a zip code of 92136-3581, and the contractor is expected to ensure compliance with environmental standards to prevent sediment runoff and manage stormwater effectively throughout the project lifecycle.
Landscaping Services

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 561990
New
DIBBS
Temporary Traffic ControlThe contract is for temporary traffic control services including the installation and maintenance of signage, cones, barriers, and flagging to ensure work zone safety, classified under NAICS code 561990 as a total small business set-aside under FAR 19.5. It is a subcontract opportunity issued by the Nuclear Reactor Program under the Department of Defense with a performance location in San Diego, California, specifically at zip code 92136-3581. The solicitation was posted on August 5, 2026, and responses are due by August 14, 2026, with all proposals required to come from qualified small businesses as defined by the SBA. The work involves deploying and managing safety infrastructure to protect workers and the public during construction or maintenance activities in high-traffic or hazardous areas, requiring strict adherence to safety standards and timely execution. The opportunity is accessible through the DIBBS system via the provided link.
All Other Support Services

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and WiringThe contract titled Electrical Installation and Wiring is a subcontract under a Total Small Business Set-Aside, designated for firms certified as small businesses by the SBA, and falls under NAICS code 238210 for electrical contracting. It requires the installation of comprehensive electrical systems including wiring, conduits, panels, and lighting fixtures for commercial or infrastructure projects within the Department of Defense’s Nuclear Reactor Program. The solicitation was posted on August 5, 2026, with a response deadline of August 14, 2026, and the work must be performed at a specified location in San Diego, California, with a zip code of 92136-3581. All eligible small business contractors must submit proposals by the deadline to be considered for award, with performance focused on meeting the technical and safety standards required for defense-related electrical infrastructure.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILM
Solicitation # SPE7M2-26-T-6013
This contract specifies the procurement of a fixed film resistor identified by NSN 5905002322946, with a requirement for 204 units to be delivered within 161 days from the contract award date, with delivery occurring FOB origin. The item is classified as a commercial item and is subject to stringent technical and quality standards outlined in MIL-PRF-55182K(Sup 1) and MIL-PRF-55182/3T, with specific part numbers and revision levels mandated. The manufacturer must be listed on the Qualified Products List at the time of contract award, and all components must comply with IPC/JEDEC J-STD-609 requirements for lead finish marking on individual unit packages. The resistor must be free from mercury and any mercury-containing compounds, except for specific exempted applications such as certain sensors or instrument components approved by NAVSEA. Ozone-depleting substances are strictly prohibited in any phase of design, manufacturing, or cleaning unless prior written approval from the contracting officer is obtained. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with additional ESD and EMI protection required under MIL-PRF-81705, including specific barrier materials from qualified manufacturers listed on QPL-81705. ESD-sensitive components must be handled and packaged at approved workstations, with cushioning and containment methods preventing damage to leads and terminals. Preservation and packaging methods must also prohibit mercury or mercury compounds entirely. All unit packages must include proper marking per the specified standards, and delivery must be made to the designated DLA Distribution location at Robins Air Force Base, Georgia, with a required ship date of January 26, 2027, and original delivery deadline of March 27, 2027.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details