Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ANODE, PLATING

Active
SPE8E6-26-T-4014Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement of an anode for plating with the NSN 3426-01-490-3318 under solicitation SPE8E6-26-T-4014, with a required delivery of 17 units to be shipped FOB origin within 167 days from the contract award. The supplier, AQUA-CHEM, INC., must comply with all DLA packaging requirements as outlined in MIL-STD-2073-1E and MIL-STD-129 for marking, including specific packaging codes and containment methods, with no special marking required. The item must be packed in units of 10 per intermediate container, with a total of 99 units per pallet, and palletized according to DLA standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the hardware unless specifically exempted for functional uses such as batteries or sensors as defined by NAVSEA, and any portable devices containing mercury must include a secondary containment and be shock-proof per NAVSEA 5100-003D. The contract enforces zero tolerance for quantity variance, with inspection and acceptance occurring at the destination. Delivery must be made to the DLA Distribution facility at New Cumberland, Pennsylvania, with the original required delivery date set for December 19, 2026, and a needed ship date of February 1, 2027. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Pricing is fixed at $17.00 per unit, and all transportation and shipping logistics must adhere to DLAD Proc Note C19 and C20.

General Info

AQUA-CHEM, INC. to deliver 17 anodes at $17 each, FOB origin, by Feb 1, 2027, per DLA packaging and mercury prohibitions.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332812 - Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to ManufacturersView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E6-26-T-4014 for Construction & Equipment

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
CHRISTOPHER BARRARO
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ANODE,PLATING
ANODE,PLATING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
AQUA-CHEM, INC. 0EXU3 P/N 067-00101-000
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017757429 0001 EA 17.000
NSN/MATERIAL:3426014903318
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
SPE8E6-26-T-4014
SECTION B
PR: 7017757429 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:099
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/01/2027 Original Required Delivery Date:12/19/2026
SPE8E6-26-T-4014 NSN/Part Number: 3426-01-490-3318 Quantity: 17 EA Purchase Request: 7017757429QTY: 17 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332812
New
Federal
Thermion feeder assembly
Solicitation # W911S226U3935
The Thermion 71000-4.8 VS Feeder Assembly is a high-performance component engineered for the Precision Arc 4.8 Twin Wire Arc Spray System, designed to deliver ultra-high deposition rates using 3/16 inch diameter spray wires such as zinc, aluminum, and zinc-aluminum alloys, with output capability up to 190 lbs. per hour. Built for rugged industrial and field applications, it features modular plug-and-play construction with uniquely keyed fittings to prevent misconnections, detachable portability for use in tight spaces as small as 24 inches, and heavy-duty, high-temperature components to endure harsh operating conditions. Its ergonomic handle and non-latching dead-man trigger enhance operator safety and reduce fatigue, while integrated self-adjusting wire straighteners eliminate helix and kinks, ensuring consistent feed to the spray head. The assembly integrates VS Technology, an automated arc voltage drive system that dynamically adjusts wire feed speed to maintain a stable arc, prevent shorting, and eliminate coating defects from sputtering. A sealed roller bearing lubricating system minimizes friction and eliminates dry-binding, while remote-mounted amperage and voltage controls allow real-time adjustments without returning to the main power unit. It is specifically matched to a 650 Amp, 100% duty cycle power supply and compatible Thermion control boxes, and requires 90-110 psi air at 60 cfm via a 1/2 inch IPS/NPT connection for optimal atomization. Change-over kits support multiple wire diameters including 1/8 inch, 3/32 inch, 2mm, and 1/16 inch, offering operational flexibility. This item is procured under solicitation W911S226U3935 by the U.S. Department of Defense through Fort Drum, NY, with a small business set-aside, and responses are due by August 13, 2026.
W6QM Micc-Ft Drum

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332812
New
DIBBS
Precision Metal Identification Plate ManufacturingA single military specification identification plate is being manufactured under a subcontract issued by the Defense Logistics Agency on behalf of the Department of Defense, with a NAICS code of 332812 for other metal product manufacturing. The plate must comply with stringent military standards including MIL-STD-129 marking requirements, and the contractor must provide full material certification to verify compliance with authorized specifications. Hazardous materials documentation must accompany the shipment to ensure regulatory adherence throughout the supply chain. The item is to be delivered to a military postal address in FPO with ZIP code 96310-7161, and responses are due by August 17, 2026, following a posting date of August 4, 2026. The contract emphasizes precise adherence to technical, labeling, and safety documentation requirements without deviation.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332812
New
DIBBS
Anodizing and Surface Treatment Services
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332812
New
SLED
Sandblasting And Powder Coating Services
Solicitation # 2026-1016
The City of Pomona is soliciting qualified local companies for a three-year annual contract to provide sandblasting and powder coating services for its Water Resources Department, with all work to be performed at the vendor’s facility. The primary scope includes abrasive media blasting and powder coating of premanufactured wrought iron panels and gates, sized between 8 feet tall by 4 feet long and 8 feet tall by 20 feet long, with an estimated volume of 200 units. Additional services encompass blasting and coating of fabricated steel items such as square tubing, pipe racks, flat stock, and corrugated steel as needed. All powder coatings must be applied in either semi-gloss black or white. Vendors are required to specify completion lead times for the wrought iron panels and ensure that any miscellaneous items are completed within seven business days. Pricing must be submitted based on linear footage or hourly rates. The solicitation, identified as Bid #2026-1016 with solicitation number 20260803007, was posted on August 4, 2026, with responses due by August 13, 2026. The contract falls under NAICS code 332812 and is open to local businesses through a SLED agency procurement process managed by the City of Pomona, California.
City Of Pomona

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 332812
New
DIBBS
Electroless Nickel Plating & Surface FinishingThe contract requires the application of electroless nickel plating in full compliance with the AMS-2404 specification, encompassing all stages from initial cleaning and surface preparation through to the final plating process, thickness verification, and corrosion resistance testing. Work must be performed to meet stringent aerospace and defense industry standards, ensuring consistent quality and performance under demanding operational conditions. The plating service is critical for enhancing durability, wear resistance, and environmental protection of components used in defense systems. This subcontract is solicited by the Department of Defense under the agency name LAND SUPPLY CHAIN, with the place of performance designated at Tinker Air Force Base, Oklahoma, 73145-8000. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026, under the NAICS code 332812, which corresponds to metal finishing and coating activities. The contract is intended for qualified vendors capable of delivering precision surface finishing services to support military hardware maintenance and production requirements.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332812
New
DIBBS
Chemical Agent Resistant Coating (CARC) ApplicationThe contract requires the application of Chemical Agent Resistant Coating (CARC) and high-temperature coatings in strict compliance with military specifications, ensuring durability and protection against chemical threats. The surface finish must meet a maximum roughness of 16 microinches, and all work must adhere to hazardous materials handling protocols to ensure safety and regulatory alignment. This subcontract is part of a Department of Defense initiative managed by LAND SUPPLIER OPNS VEHICLE SPT, with performance required at the facility in New Cumberland, Pennsylvania, ZIP 17070-5002. The North American Industry Classification System code 332812 identifies the work under metal coating services for military equipment. Submission of proposals is due by August 13, 2026, with the solicitation posted on August 2, 2026, through the DIBBS portal.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 332812
New
Federal
Chemical Conversion Coating (MIL-DTL-5541)The contract requires the application of chromate or non-chromate chemical conversion coatings on aluminum components in accordance with MIL-DTL-5541 Class 1A specifications to provide corrosion protection and maintain electrical conductivity. This work is targeted at aluminum parts used in defense applications where surface treatment must meet rigorous military standards for durability, adhesion, and performance under environmental stress. The coating process must ensure consistent quality across all components, with strict adherence to the technical requirements of the specification, including preparation, application, rinsing, drying, and inspection procedures. This is a small business set-aside subcontract under the NAICS code 332812, indicating it is reserved for small businesses in the metal finishing industry. The opportunity is managed by the Department of Defense through the W6QK Lad Contr Office, with performance expected to take place in Chambersburg. Respondents must submit proposals by August 28, 2026, following the solicitation posted on July 31, 2026. The nature of the work demands precise execution, compliance with federal defense standards, and the ability to qualify and validate coating results through established testing protocols to ensure full conformance to MIL-DTL-5541 Class 1A requirements.
W6QK Lad Contr Office

POSTED

5 days ago

DEADLINE

in 23 days
View Details
NAICS: 332812
New
Federal
Heat Treatment and Surface Enhancement ServicesThe contract for Heat Treatment and Surface Enhancement Services requires specialized thermal and mechanical processing of turbine rotors to meet exacting material performance and fatigue life standards. Key processes include solution annealing, aging, shot peening, and surface coatings, each critical to enhancing structural integrity, wear resistance, and longevity under high-stress operational conditions. These treatments must be executed with precision to ensure compatibility with high-performance alloys and adherence to aerospace and defense specifications. The solicitation is issued as a subcontract under the NAICS code 332812, with a response deadline of August 8, 2026, and was posted on July 31, 2026. The contracting activity falls under the Department of Defense, specifically the Ok DLA Aviation office in Oklahoma City, indicating the work supports military aviation systems. While no set-aside designation or point of contact is specified, performance is expected to align with defense-grade quality controls and delivery timelines required for mission-critical rotor components.
Ok DLA Aviation At Oklahoma City

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 332812
New
DIBBS
Cadmium Plating ServicesThe contract seeks subcontracting services for the electroplating of machined parts with cadmium in full compliance with SAE AMS-QQ-P-416G specifications, encompassing all required processes including passivation, thorough rinsing, and adhesion testing to ensure performance and durability. The work must be performed at the designated place of performance in Tracy, California, with precise adherence to military and aerospace standards for surface treatment integrity. All steps in the plating process must meet stringent quality controls to guarantee uniform coating thickness, corrosion resistance, and bonding strength under operational conditions. This subcontract opportunity, issued by the ASC Commodities Division under the Department of Defense, is classified under NAICS code 332812 for electroplating, plating, coating, and related services. The solicitation was posted on July 30, 2026, with a firm response deadline of August 7, 2026, requiring bidders to submit proposals prior to the stated cutoff. While no set-aside designation is specified, interested parties must ensure full compliance with the technical and procedural requirements of the referenced specification and be prepared to demonstrate capability in handling sensitive defense-related components under rigorous quality assurance protocols.
ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 332812
New
DIBBS
Chemical Agent Resistant Coating ApplicationThe contract requires the application of chemical agent resistant and high-temperature finishes to meet the specifications outlined in DCSC Drawing 16236 CS-2300-0001, ensuring equipment durability in CBRN environments. The work must comply with stringent military standards to withstand exposure to chemical, biological, radiological, nuclear, and high-temperature conditions, with performance focused on long-term protective integrity under extreme operational stress. All coatings must be applied precisely according to the referenced drawing to guarantee compatibility and effectiveness in hostile environments. This is a subcontract opportunity under NAICS code 332812, posted by the Maritime Supply Chain within the Department of Defense, with a response deadline of August 10, 2026. The place of performance is specified as New Cumberland, Pennsylvania, 17070-5002, indicating that production or application activities must be conducted at or near this location. Interested parties must submit proposals prior to the deadline, as this is a competitive subcontract solicitation with no set-aside designation. The official solicitation details can be accessed through the provided DIBBS link for full administrative and technical requirements.
MARITIME SUPPLY CHAIN

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 332812
New
DIBBS
Brazing and Joining Services (Sil-Brazed Socket Fabrication)The contract calls for high-integrity silver brazing of socket joints using military-approved procedures to achieve leak-tight and structurally sound connections capable of withstanding operational stress under ALRE conditions. This work requires precise adherence to defense-grade standards, ensuring the fabricated joints meet stringent performance requirements for use in critical maritime environments. The fabrication must be executed with exceptional quality control to guarantee reliability under extreme mechanical and environmental loads. This subcontract is solicited under NAICS code 332812 and is set for performance in San Diego, California, with a response deadline of August 14, 2026. The contracting activity falls under the Department of Defense through the Maritime Supply Chain organization, emphasizing its importance to naval and maritime systems. While specific contact details and set-aside status are not provided, the solicitation is accessible via the DIBBS platform, indicating a formal procurement process aimed at qualified subcontractors with proven expertise in military-grade brazing and joining technologies.
MARITIME SUPPLY CHAIN

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 332812
DIBBS
Surface Treatment and Corrosion ProtectionThe contract titled Surface Treatment and Corrosion Protection seeks subcontractors to apply protective coatings including primers, chemical treatments, and finishes that meet rigorous military environmental durability standards. Work must ensure long-term corrosion resistance and operational readiness of defense equipment under extreme conditions, adhering strictly to specified military specifications and quality control protocols. The scope encompasses all stages of surface preparation, coating application, and verification to achieve compliance with environmental and performance benchmarks required by the Department of Defense. This is a subcontract opportunity posted by the Defense Logistics Agency under NAICS code 332812, with a response deadline of August 10, 2026. Performance is to be carried out at a military postal address in FPO with ZIP code 96663-1290, indicating operations may occur in deployed or overseas locations. There is no set-aside designation specified, and the contract does not list a point of contact, requiring potential bidders to rely on the provided DIBBS portal link for submission guidelines and further details. Timing is critical, as proposals must be submitted before the deadline to be considered for award.
Defense Logistics Agency

POSTED

7 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details