This Solicitation opportunity from Department Of Defense was posted on May 19, 2021. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Anodization of M98 Filter Components

Closed

W52P1J-21-Q-3007Federal

Submission Closed05/19/2021, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332813

New

Federal

Specialized Aerospace Finishing and Surface TreatmentThis subcontract for Specialized Aerospace Finishing and Surface Treatment involves performing Significant Industrial Processes for prime contractors supporting DLA Aviation F-118 engine projects. The scope of work requires the application of aerospace-grade heat treating, plating, anodizing, or chemical coatings to valve assembly parts utilizing industrial plating baths and heat-treatment furnaces to deliver fully treated components. Managed by the Department of Defense through DLA Aviation at Oklahoma City, the contract falls under NAICS code 332813. Qualified providers must hold SIP Certification, ISO 9001, or AS9100 certifications to ensure compliance with aerospace standards. The solicitation was posted on October 20, 2026, with a response deadline of October 30, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Protective Finish Application (Drawing # 7309999)This subcontract opportunity, issued by the Department of Defense under agency W6QK Acc Wva, requires a contractor to perform specialized protective coating and plating for gear rack units on Watervliet Arsenal projects. The selected provider will utilize industrial plating and surface preparation equipment to apply finishes that prevent corrosion and wear, ensuring all work strictly adheres to the specifications outlined in Drawing 7309999. The project is designated as a total Small Business Set Aside under NAICS code 332813. Interested parties must submit their responses by November 3, 2026, for performance located in zip code 12189. The primary objective is the successful delivery of finished coated gear racks that meet all technical requirements.

POSTED

DEADLINE

Precision Refinishing and Corrosion ControlThe Precision Refinishing and Corrosion Control subcontract involves providing specialized cleaning, corrosion treatment, and refinishing services for transmitter housings. Supporting prime contractors on projects for the USAF 448th Supply Chain Management Wing, the work is governed by strict military standards, including MIL-HDBK-454C for cleaning and MIL-STD-1568E section 4 and T.O. 1-1-691 for corrosion control. The process requires the use of industrial cleaning agents and corrosion-resistant coatings to ensure long-term surface protection of the delivered components. Managed by the Department of Defense under agency FA8250 Afsc Pzaaa, this opportunity falls under NAICS code 332813. The solicitation was posted on October 20, 2026, with a response deadline of November 5, 2026. The primary objective is the delivery of fully cleaned and refinished transmitter components that meet all specified military technical requirements.

POSTED

DEADLINE

Aerospace Finishing and Coating ServicesThe Aerospace Finishing and Coating Services subcontract, issued by the Department of Defense under Navsup Weapon Systems Support, involves providing specialized surface treatments for Department of the Navy C130 aircraft projects. The scope of work includes the application of aerospace-grade primers, paints, anti-corrosion coatings, anodizing, and chemical conversion coatings. All work must be performed using industrial coating booths and anodizing tanks, with finish thickness verified strictly against C130 specifications. To qualify for this contract, providers must hold SAE AS9100 or ISO 9001 certification and are required to deliver all finished components alongside the necessary process certifications. The opportunity was posted on October 20, 2026, with a response deadline of October 26, 2026, falling under NAICS code 332813.

Navsup Weapon Systems Support

POSTED

DEADLINE

F-18 ACS Component Repair (WRA/SRA Units)This subcontract involves the depot-level repair and overhaul of specialized F-18 Advance Cockpit System components for prime contractors supporting NAVSUP Weapon Systems Support. The scope of work focuses on four specific units, consisting of two Workshop Replaceable Assemblies and two Shop Replaceable Assemblies, including Large Area Displays and Display Units. The contractor is required to utilize specialized F-18 avionics test equipment and maintain strict compliance with FAR 52.246-11 to deliver certified units. This project falls under NAICS code 332813 and is managed by the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

NADCAP Certified Special Processing (Heat Treat/Plating/NDT)This subcontract opportunity with the Department of Defense DLA Weapons Support ASC Commodities Division involves providing specialized aerospace processing for Web Hinge Truss components. The selected contractor will be responsible for executing heat treating, chemical processing, or non-destructive testing using industrial furnaces, chemical baths, or X-ray and ultrasonic equipment. All work is to be performed at Tinker AFB. A critical requirement for this contract is that the provider must hold NADCAP approval for the specific processes being performed. Deliverables include the processed aerospace components accompanied by detailed process logs and a certification of compliance. The response deadline for this requirement is October 27, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Specialized Aerospace Finishing/CoatingThis subcontract, titled Specialized Aerospace Finishing/Coating, is issued by the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Div. The project requires the application of surface treatments and anti-corrosion coatings to fuselage beam assemblies for aerospace projects. Work must be performed using chemical baths and industrial coating systems to apply protective coatings, anodizing, or finishes in strict accordance with reference drawings and MIL-SPEC or AMS standards. The primary objective is the delivery of finished and coated beam assemblies that meet rigorous military specifications. Interested parties should note that the solicitation was posted on October 19, 2026, with a response deadline of October 27, 2026. The contract falls under NAICS code 332813, focusing on specialized aerospace finishing services for prime contractors.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Component Finishing and CoatingThis subcontract for Aerospace Component Finishing and Coating involves providing specialized surface treatments, plating, and coatings for prime contractors supporting US Air Force projects. The scope of work focuses on applying specific coatings to prevent wear and corrosion on components, utilizing industrial plating tanks and hazardous material handling systems. All operations must strictly adhere to aerospace finishing standards, including MIL-SPEC and 29 CFR 1910.1200 regulations. Managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, the project is categorized under NAICS code 332813. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, to provide the finished, coated components as required by the referenced technical drawings.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0263

Solicitation SPE8E5-27-T-0263 is a procurement by the Defense Logistics Agency for one box of Cleaning Solvent, GE (NSN 7930-01-367-0995). The item must comply with the basic non-government standard SAE AMS3167 Revision B dated October 1, 2005, and is subject to a non-extendable shelf life of 12 months. Delivery is required within five days after receipt of order, with an original required delivery date of October 21, 2026. The shipment must be sent via the fastest traceable means to the 309 AMARG MXDSPS at Davis-Monthan AFB, Arizona. Because the solvent is classified as hazardous material, the contractor must adhere to strict packaging, marking, and shipping requirements, including IP025, MIL-STD-129, and the Hazard Communication Standard 29 CFR 1910.1200. Material Safety Data Sheets and hazard warning labels must be submitted prior to the award. Inspection and acceptance will take place at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, small business representations, and domestic sourcing restrictions.

Defense Logistics Agency

POSTED

DEADLINE

Industrial Hot-Dip Galvanizing ServicesThis subcontract for Industrial Hot-Dip Galvanizing Services supports electrical infrastructure projects for the City of Piqua in Ohio. The selected provider will be responsible for the comprehensive treatment of fabricated steel members, including cleaning, pickling, rinsing, and drying, followed by the application of a smooth, high-quality galvanized coating using industrial kettles and chemical tanks. A critical requirement of the process is ensuring that all metal stamps remain legible after the coating is applied. The scope of work concludes with the delivery of the processed steel members back to the fabricator or directly to the project site. This opportunity falls under NAICS code 332813, with a response deadline set for October 28, 2026.

POSTED

DEADLINE

Aerospace Surface Treatment and FinishingThe Aerospace Surface Treatment and Finishing subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves providing specialized surface treatments and coatings for prime contractors. The scope of work includes chemical milling, anodizing, priming, and the application of anti-corrosive coatings to aircraft skins, all of which must adhere to strict aircraft technical specifications. To execute these services, the contractor must utilize aerospace-approved primers and anodizing tanks. A critical requirement for this contract is that the provider must hold Nadcap accreditation for aerospace chemical processing to ensure industry quality standards are met. The final deliverable is the completed, coated aircraft skin.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Passivation Services for Nickel Alloy FastenersThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves providing specialized chemical passivation services for Nickel Alloy 718 shear bolts. The primary objective is to enhance the corrosion resistance of these fasteners for prime contractors on DLA supply contracts. The scope of work requires the use of compatible chemical baths and tanks to clean and treat bolt surfaces, with a strict requirement to verify the effectiveness of the surface treatment according to the specifications outlined in the Statement of Work. The opportunity is designated as a total Small Business Set Aside under NAICS code 332813. Interested parties must respond by October 27, 2026, to provide passivated shear bolts that are fully prepared for final inspection.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days

General Info

Agency

Department Of Defense → W4MM USA Joint Munitions Command

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

Set-Aside

SBA

Documents

W52P1J21Q3007 Amendment 0001 - Anodization

3 pages · amendment

High

W52P1J21Q3007 Amendment 0002 - Anodization

2 pages · amendment

High

W52P1J-21-Q-3007 Amendment 0003

amendment

High

W52P1J21Q3007 Amendment 0004 - Anodization

3 pages · amendment

High

W52P1J21Q3007 Amendment 5 - Cancel Solicitation

2 pages · amendment

High

W52P1J-21-Q-3007 Anodization Final Solicitation

45 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

11 updates

PhaseClosed

PostedFeb 1

Presolicitation

Notice updatedFeb 3

Notice details unchanged. Attachments may have changed.

Notice updatedFeb 3

The notice description changed.

Type ChangedMar 29

Presolicitation → Solicitation

Notice updatedMar 29

Notice details unchanged. Attachments may have changed.

Notice updatedMar 29

Notice details unchanged. Attachments may have changed.

Notice updatedMar 29

Notice details unchanged. Attachments may have changed.

Notice updatedMar 31

The notice description changed.

Notice updatedApr 16

Response deadline changed from Apr 16, 2021 to Apr 21, 2021. The notice description changed.

Notice updatedApr 21

Response deadline changed from Apr 21, 2021 to Apr 30, 2021. The notice description changed.

Notice updatedApr 28

The notice description changed.

Deadline changedMay 19

Response deadline changed from Apr 30, 2021 to May 19, 2021.

Notice updatedMay 19

Response deadline time changed from 6:00 PM UTC to 10:00 PM UTC on May 19, 2021. The notice description changed.

Response DeadlineMay 19

Deadline has passed

Submission Closed

05/19/2021, 10:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W4MM USA Joint Munitions Command

Contacts2 people available

OfficeROCK ISLAND, IL, 61299-5000, USA

Organization / AgencyDepartment Of Defense → W4MM USA Joint Munitions Command

Office AddressROCK ISLAND, IL, 61299-5000, USA

Contacts

Travon Aldridge

contact@example.gov

+1 (555) 000-0000

Elizabeth W. Zaharopoulos

contact@example.gov

+1 (555) 000-0000

Full Description

The Government had a requirement for the cleaning, degreasing and anodizing of Aluminum components used in the production of Large Filters. This scope covers the degreasing, cleaning, and any other required preparation for the anodizing of the M98 Inner Liners and M98 Outer Liners. Amendment 0001 to solicitation W52P1J-21-Q-3007 has been executed as of 31 March 2021. Amendment 0001 can be found in the list of attachments associated with the solicitation. The closing date for this solicitation remains the same. Quote shall be recieved no later than 1:00pm Central Time, 16, April 2021. Amendment 0002 to solicitation W52P1J-21-Q-3007 has been executed as of 16 April 2021. Amendment 0002 can be found in the list of attachments associated with the solicitation. The closing date for this solicitation is extended by a few days. Quote shall be recieved no later than 1:00pm Central Time, 21, April 2021. Amendment 0003 to solicitation W52P1J-21-Q-3007 has been executed as of 21 April 2021. Amendment 0003 can be found in the list of attachments associated with the solicitation. The closing date for this solicitation is extended by a week. Quote shall be recieved no later than 1:00pm Central Time, 30, April 2021. Amendment 0004 to solicitation W52P1J-21-Q-3007 has been executed as of 28 April 2021. Amendment 0004 can be found in the list of attachments associated with the solicitation. The closing date for this solicitation remains unchanged. Quote shall be recieved no later than 1:00pm Central Time, 30, April 2021. Amendment 0005 to solicitation W52P1J-21-Q-3007 has been executed as of 19 May 2021. Amendment 0005 can be found in the list of attachments associated with the solicitation. The closing date for this solicitation is 5:00pm Central Time, 19, May 2021.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS