This Solicitation opportunity from Government of Canada was posted on January 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Antaris O2 Analyzers

Closed

W8485-269293/AInternational

Submission Closed02/13/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

DIBBS

COLORIMETER, BROMINEThe contract solicits two bromine colorimeters under NSN 6630-01-690-5334, issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation, identified by number SPE2DH-26-T-5494, was posted on July 26, 2026, with a response deadline of August 3, 2026, and is classified as a federal solicitation with no set-aside provisions. The equipment is intended for use in chemical analysis applications requiring precise bromine measurement, and procurement is conducted through the DLA’s online procurement portal. No specific place of performance or point of contact information is provided, and the solicitation is open to all qualified federal contractors without geographic or small business restrictions.

Defense Logistics Agency

POSTED

DEADLINE

Procurement of a Humanoid RobotThe Department of Commerce’s National Institute of Standards and Technology (NIST) is soliciting a single commercially available humanoid robot for use in research and validation of robotic test methods at its Gaithersburg, Maryland facility. The robot must meet stringent technical specifications including a minimum height of 1.5 meters, at least five degrees of freedom per leg and six per arm, a one-hour minimum battery life, and integrated vision, lidar, IMU, and force-torque sensors at the wrists and ankles. It must be delivered new with all required accessories, accompanied by a licensed software/API enabling custom scripting, sensor calibration, and external system integration, and include installation, training, and warranty support. The contract is structured as a firm-fixed-price acquisition with delivery due six months after award under F.O.B. Destination terms, meaning the contractor bears all risk and cost of transport until physical receipt at NIST’s Shipping and Receiving facility. Offerors must demonstrate technical capability that exceeds all minimum requirements—failure to meet any specification results in automatic disqualification—and provide up to three relevant past performance examples, with preference given to prime contractor experience. Price is evaluated only after technical and performance qualifications are confirmed and is the least important factor in award, which will be determined through a best-value trade-off approach, not lowest price technically acceptable. The solicitation is exclusively set aside for small businesses under NAICS code 334516 with a size standard of 1,000 employees, and all offerors must provide a Unique Entity Identifier and CAGE code. Proposals must be submitted electronically via email to robert.cowins@nist.gov by the deadline of June 15, 2026, and must include separate volumes for technical, pricing, and compliance information, with past performance narratives limited to one single-sided page each. Compliance with numerous FAR clauses is mandatory, including those relating to business ethics, whistleblower rights, trafficking in persons, child labor, equal opportunity, Buy American requirements, and the prohibition of internal confidentiality agreements that restrict reporting to the government. Deviations from standard FAR language effective January 2026 are incorporated into several clauses, including those governing contractor responsibility, System for Award Management, and protest procedures. Contractors must also manage strict site access limitations, requiring advance registration of personnel and vehicles, NIST-issued badges, and daily verification of campus status. Invoicing must be processed through the U.S. Treasury’s Invoice Processing Platform, with payment contingent upon full system acceptance and successful validation testing conducted

Department Of Commerce Nist

POSTED

DEADLINE

Whole-Slide Imaging Scanner System IntegrationThe contract entails the supply and delivery of a newly manufactured, fully integrated Whole-Slide Imaging Scanner System designed for high-precision digital pathology applications. The system must include automated slide handling, bright-field illumination, motorized scanning, real-time image stitching, dedicated viewing software, and secure data storage capabilities, ensuring seamless workflow integration in laboratory environments. All components must be newly manufactured and fully operational upon delivery, meeting rigorous performance and compatibility standards to support the FDA’s diagnostic and research initiatives. The solicitation is issued as a subcontract under the Department of Health and Human Services, specifically through the FDA Office of Acquisition and Grant Services, with performance required in Silver Spring, Maryland, ZIP code 20993. The NAICS code 334516 indicates classification under Medical Equipment and Supplies Manufacturing. The response deadline is set for August 7, 2026, at 4:00 PM, with the opportunity posted on July 24, 2026. There is no set-aside designation specified, and the contract is open to qualified contractors capable of delivering a compliant, end-to-end WSI solution without reliance on legacy or refurbished equipment.

FDA Office Of Acq Grant Svcs

POSTED

DEADLINE

High-Precision 399 nm Fiber Laser System ManufacturingA custom narrow linewidth fiber laser system operating at 399 nm is being procured through a subcontract to meet stringent optical performance requirements, including precision wavelength stability, spectral purity, and output power consistency. The project encompasses full design, engineering, and manufacturing services with a focus on delivering a system tailored for high-precision applications, likely in atomic physics or quantum sensing environments. The work is directed by the National Institute of Standards and Technology under the U.S. Department of Commerce, with performance required in Boulder, Colorado, and production must adhere to exacting technical standards for coherence, beam quality, and environmental robustness. The solicitation was posted on July 24, 2026, with responses due by August 5, 2026, indicating a tight timeline for technical proposal submission. The North American Industry Classification System code 334516 confirms the focus on manufacturing optical equipment and instruments, underscoring the specialized nature of the components and systems involved. While no set-aside type or point of contact is specified, the contract structure implies a competitive procurement process aimed at identifying a vendor with proven expertise in advanced fiber laser systems. Compliance with all performance metrics and delivery timelines is critical, as this system is intended for mission-critical scientific operations within a national laboratory setting.

Department Of Commerce Nist

POSTED

DEADLINE

RF Synthesizer Supply and DeliveryThe contract is a small business set-aside for the supply and delivery of a commercial off-the-shelf RF synthesizer to support quantum sensing and timekeeping research at NIST in Gaithersburg, Maryland. The technical scope requires the device to meet specific performance criteria essential for precision applications in quantum experiments, ensuring stability, frequency accuracy, and low phase noise. The solicitation is open for proposals with a deadline of July 31, 2026, and is classified as a subcontract under NAICS code 334516, which pertains to communications equipment manufacturing. Only small businesses are eligible to respond, as this is a total small business set-aside mandated under FAR 19.5. The work will be performed at the NIST facility in Gaithersburg, and while no point of contact is listed, the opportunity is publicly accessible through the SAM.gov platform.

Department Of Commerce Nist

POSTED

DEADLINE

Automated Special Stainer System SupplyThe contract solicits the supply of an automated histochemical staining system designed for diagnostic use in clinical laboratories, with the capability to perform both routine and complex staining protocols including AFB, GMS, PAS, Trichrome, Reticulin, and Iron stains. The system must meet stringent operational and reliability standards to support accurate pathological analysis in a high-throughput environment. The procurement is structured as a subcontract under the Department of Veterans Affairs through the Network Contract Office 19, with performance expected to take place in Salt Lake City, Utah, at the designated zip code 84148. The solicitation was posted on July 24, 2026, with responses due by July 31, 2026, at 4:00 PM, indicating a limited window for vendors to submit proposals. The North American Industry Classification System code 334516 specifically categorizes this as medical and diagnostic laboratory equipment manufacturing, ensuring that only qualified manufacturers or authorized distributors may respond. While no set-aside provisions or small business preferences are indicated, the contract demands full compliance with clinical diagnostic standards and likely requires evidence of prior deployments in similar healthcare or Veterans Affairs facilities. The absence of a point of contact suggests that all inquiries must be directed through the official Sam.gov platform linked in the posting.

Network Contract Office 19 (36C259)

POSTED

DEADLINE

4K Recirculating Cryostat Supply and IntegrationA turnkey 4K recirculating cryostat system with integrated optical and microwave access is being procured for quantum networking research, with strict requirements to meet NIST specifications for silicon carbide defect characterization. The system must be fully functional upon delivery, including all necessary components for low-temperature operation, precision control, and signal transmission, and must be ready for immediate integration into existing experimental setups without requiring additional engineering modifications. Environmental and operational conditions are defined to ensure stability and repeatability in quantum state measurements under cryogenic conditions. The contract is structured as a subcontract under the Department of Commerce, NIST, with performance required at the Gaithersburg location, zip code 20899. The solicitation, posted on July 24, 2026, closes for responses on August 3, 2026, and falls under NAICS code 334516 for laboratory analytical instrument manufacturing. Compliance with NIST standards for defect characterization is mandatory, requiring rigorous documentation, testing, and validation protocols to confirm system performance against specified parameters. The recipient must demonstrate proven capability in delivering similar systems and provide evidence of prior successful integration in quantum science environments.

Department Of Commerce Nist

POSTED

DEADLINE

Scientific Instrument Supply – Tissue Dissociation EquipmentThe contract is for the supply of a Miltenyi Biotec GentleMACS Octo Dissociator with Heaters, a specialized scientific instrument designed for automated tissue dissociation and homogenization to support liquid chromatography-mass spectrometry analyses. This equipment will enable precise and reproducible processing of biological tissues, ensuring high-quality sample preparation critical for downstream analytical workflows. The instrument’s heating capabilities enhance consistency in tissue disruption, making it suitable for sensitive and demanding LC-MS applications requiring uniform cell yields and minimal degradation. The contract is classified as a subcontract under NAICS code 334516, which corresponds to laboratory apparatus and tool manufacturing. It is associated with the National Institutes of Health, operating under the Department of Health and Human Services, with performance taking place in Bethesda, Maryland, at a ZIP code of 20892. The solicitation was posted on July 24, 2026, and no set-aside designation has been specified, indicating the opportunity is open to all eligible subcontractors without restriction based on business size or category.

National Institutes Of Health Olao

POSTED

DEADLINE

Compact Single-Frequency Distributed Feedback (DFB) Laser SupplyA compact single-frequency distributed feedback (DFB) laser operating at precisely 759.35 nm is being procured for use in high-accuracy optical clock applications requiring exceptional spectral purity and long-term frequency stability. The laser must meet stringent performance criteria to support precision frequency control in advanced atomic timekeeping systems, ensuring minimal linewidth and exceptional resistance to environmental perturbations. This subcontract is issued by the National Institute of Standards and Technology under the Department of Commerce, with performance required in Boulder, Colorado, 80305, and responses are due by August 3, 2026. The procurement falls under NAICS code 334516, indicating classification within the manufacturing of semiconductors and related devices, and is intended to support critical scientific infrastructure for time and frequency standards.

Department Of Commerce Nist

POSTED

DEADLINE

Compact Semiconductor External Cavity Diode Laser (ECDL) SupplyThe contract calls for the supply of three compact, tunable, single-frequency external cavity diode lasers operating at precisely 759.35 nm, designed for use in atomic spectroscopy within optical clock applications. These lasers must meet stringent performance specifications to ensure high stability, narrow linewidth, and precise wavelength control necessary for advanced scientific measurements in timekeeping and frequency standards. The lasers are intended for integration into high-precision optical systems at the National Institute of Standards and Technology in Boulder, Colorado, where they will support research involving atomic transitions critical to next-generation time and frequency metrology. Subcontractors are required to deliver fully functional units by the response deadline of August 3, 2026, and the procurement falls under NAICS code 334516, indicating it is classified under semiconductor and other electronic component manufacturing. The work is to be performed in Boulder, with all units expected to be delivered and validated at the specified location. The solicitation does not include a set-aside designation, and while no point of contact details are provided, the contracting agency is the Department of Commerce through NIST, underscoring the technical rigor and mission-critical nature of the laser requirements for national standards research.

Department Of Commerce Nist

POSTED

DEADLINE

Semiconductor Laser Amplifier and Evaluation Board Mount SupplyThe contract calls for the supply of two semiconductor laser amplifiers, each accompanied by evaluation board mounts, designed to meet exacting technical standards required for integration into NIST’s precision optical clock systems. These amplifiers must satisfy stringent performance criteria to ensure stability, noise characteristics, and spectral purity necessary for atomic timekeeping applications. The equipment is intended for use at NIST’s Boulder facility, where it will play a critical role in advancing the accuracy and reliability of next-generation optical clocks. Delivery of the units must include all necessary mounting hardware and configuration support to enable seamless installation and testing within existing experimental setups. The solicitation is set as a subcontract with a response deadline of August 3, 2026, and is categorized under NAICS code 334516, which pertains to the manufacturing of semiconductor and related devices. The contract is administered by the Department of Commerce through NIST, with performance required at the Boulder location, zip code 80305. While no set-aside designation or point of contact details are provided, the timing and specificity suggest a targeted procurement aimed at securing high-precision components from qualified suppliers with demonstrated expertise in photonics and laboratory-grade laser systems. All submitted proposals must align precisely with the technical specifications to ensure compatibility and operational integrity within NIST’s advanced optical clock infrastructure.

Department Of Commerce Nist

POSTED

DEADLINE

Additional 300 mm Lens SupplyThe contract pertains to the supply of an additional 300 mm precision lens, designated STP2410, intended for use in flexible optical configurations within laser diagnostics systems. This subcontract is issued by the Naval Supply Systems Command Fleet Logistics Center San Diego under the Department of Defense and is classified under NAICS code 334516, which relates to photographic and photocopying equipment manufacturing. The lens is critical to enhancing the adaptability and accuracy of optical measurement systems used in advanced diagnostic applications, likely supporting defense-related research or operational testing environments. Performance of this contract is expected to occur at a location identified by the city code 51585, though no specific street address or state is provided. Responses to this solicitation are due by July 30, 2026, at 7:00 PM Eastern Time, with the opportunity posted on July 24, 2026. No set-aside provisions are specified, meaning there are no restrictions based on small business, veteran-owned, or other socioeconomic categories. No point of contact details are included in the public posting, and all inquiry and submission procedures must follow standard subcontract coordination protocols through the SAM.gov platform via the provided UI link. The requirement reflects a specialized, high-precision component need within a broader systems integration effort, emphasizing technical accuracy and strict manufacturing tolerances for optical clarity and alignment under demanding operational conditions.

Navsup Flt Logistics Ctr San Diego

POSTED

2 days ago

DEADLINE

in 4 days

AI Contract Overview

The Department of National Defence seeks to procure six units of a specialized Antaris Aviator’s Breathing Oxygen (ABO) Fourier Transform Infrared Spectroscopy (FTIR) System, specifically the NSN 6650:01-717-6603 Spectrometer with diffraction grating, supplied as a complete system including calibrated gas sampling, pressure/temperature controls, and associated industrial components mounted in a rugged shipping crate. The procurement is limited to a single pre-identified supplier, Thermo Fisher Scientific, due to exclusive manufacturing rights and the absence of reasonable alternatives. This procurement is governed under various international trade agreements but utilizes limited tendering exceptions related to proprietary technology and intellectual property protections that justify sole-source acquisition. Suppliers interested in competing must submit a statement of capabilities demonstrating compliance with the technical requirements by February 13, 2026. The anticipated contract value is approximately CAD 1.99 million, excluding taxes, with delivery scheduled to commence by April 15, 2026. Ownership of any intellectual property developed during the contract will reside with the contractor. Contact for inquiries and submissions is Kyle Sorrie at the Department of National Defence. If no other qualified suppliers submit capable proposals before the deadline, the contract award may proceed directly with Thermo Fisher Scientific.

General Info

Department of National Defence sole-sourcing six ABO FTIR Spectrometer systems from Thermo Fisher Scientific.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

(2)

Préavis d'attribution de contrat - Antaris O2 Analyzers ACAN

PDF•4 pages•presolicitation

W8485-269293 - Advance Contract Award Notice for Antaris O2 Analyzers

PDF•4 pages•acan

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJan 29

Solicitation

Response DeadlineFeb 13

Deadline has passed

Submission Closed

02/13/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

Contacts

Kyle SorrieContracting Authority

contact@example.gov

+1 (555) 000-0000

Full Description

1. Advance Contract Award Notice (ACAN) An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier. 2. Definition of the requirement The Department of National Defence has a requirement for the supply of 6 units of the following: NSN: 6650:01-717-6603, Spectrometer, Diffraction Grating, Part number - 912A1302 Complete Antaris Aviator’s Breathing Oxygen (ABO) Fourier Transform Infrared Spectroscopy (FTIR) System (120V): - Antaris Industrial Gas System FTIR configured with 10m gas cell - Pressure/temperature controls, ABO calibration, and supporting software - Gas sampling manifold, certified for oxygen service, with associated gas regulators, flow meters, and control valves - Battery-backed uninterruptible power supply - All components mounted into an industrial 19" rack within a rugged, reusable shipping crate; Air compressor with filter to provide clean, dry, filtered air for FTIR operation 3. Criteria for assessment of the Statement of Capabilities (Minimum Essential Requirements) Any interested supplier must demonstrate by way of a statement of capabilities that its product/equipment/system (as appropriate) meets the following requirements of items listed in section 2 above – Definition of Requirement. 4. This procurement is subject to the following trade agreement(s) • World Trade Organization Agreement on Government Procurement (WTO GPA) - Revised • Canada-Panama Free Trade Agreement • Canada-Korea Free Trade Agreement (CKFTA) • Canada-Honduras Free Trade Agreement • Canadian Free Trade Agreement (CFTA) • Canada-European Union Comprehensive Economic and Trade Agreement (CETA) • Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) • Canada-Ukraine Free Trade Agreement 2023 Modernized (CUFTA) • Canada-UK Trade Continuity Agreement (Canada-UK TCA) • Canada-Chile Free Trade Agreement (CCFTA) • Canada-Colombia Free Trade Agreement • Canada-Peru Free Trade Agreement (CPFTA) 5. Justification for the Pre-Identified Supplier The parts sought by the Department of National Defence (as outlined under part 2) are only manufactured by one supplier, Thermo Fisher Scientific, 2845 Argentia Road, Mississauga, ON L5N 5V4.. 6. Government Contracts Regulations Exception The following exception to the Government Contracts Regulations is invoked for this procurement under subsection 6(d) - "only one person is capable of performing the work". 7. Exclusions and/or Limited Tendering Reasons The following exclusion(s) and/or limited tendering reasons are invoked under: Canadian Free Trade Agreement (CFTA), Article 513.1: Limited Tendering (b) (ii) the protection of patents, copyrights, or other exclusive rights; Canada–Chile Free Trade Agreement (CCFTA), Article Kbis-09: Tendering Procedures, para 1 : Limited Tendering b. where the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists; Canada–Colombia Free Trade Agreement (CCoFTA), Article 1409 Limited Tendering b. ii. The protection of patents, copyrights or other exclusive rights; Canada–Honduras Free Trade Agreement (CHFTA), Chapter 17, Article 17.11 Limited Tendering (b) (ii) the good or service is protected by a patent, copyright or other exclusive intellectual property right; Canada–Korea Free Trade Agreement (CKFTA), which defers to WTO-AGP Article XV, Limited Tendering b) when, for works of art or for reasons connected with protection of exclusive rights, such as patents or copyrights; Canada–Panama Free Trade Agreement (CPFTA), Chapter 16, Article 16.10 Limited Tendering b. ii. a good or service being procured is protected by a patent, copyright or another exclusive right; Canada–Peru Free Trade Agreement (CPAFTA), Article 1409: Limited Tendering (b) (ii) the protection of patents, copyrights or other exclusive rights; World Trade Organization – Agreement on Government Procurement - Revised (WTO-AGP), Article XV – Limited Tendering b. Limited Tendering b) when, for works of art or for reasons connected with protection of exclusive rights, such as patents or copyrights, or in the absence of competition for technical reasons, the products or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists; Canada-European Union Comprehensive Economic and Trade Agreement (CETA), Article 19.12(b)(ii) the protection of patents, copyrights or other exclusive rights; Canada-United Kingdom Trade Continuity Agreement (Canada-UK TCA) - The provisions of CETA are incorporated by reference into and made part of this Agreement; Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP), Article 15.10 (b) (ii) the protection of patents, copyrights or other exclusive rights; Canada–Ukraine Free Trade Agreement - 2023 Modernized (CUFTA) -The provisions of WTO-AGP Article XV, Limited Tendering are incorporated by reference into and made part of this Agreement. 8. Ownership of Foreground Intellectual Property o Ownership of any Foreground Intellectual Property arising out of the proposed contract will vest in the Contractor. 9. Period of the proposed contract or delivery date o Delivery of the items is to begin by 15 April, 2026. 10. Cost estimate of the proposed contract The estimated value of the contract is $1,990,890.00 (taxes extra). 11. Name and address of the pre-identified supplier: Thermo Fisher Scientific, 2845 Argentia Road, Mississauga, ON L5N 5V4. 12. Suppliers' right to submit a statement of capabilities Suppliers who consider themselves fully qualified and available to provide the goods, services or construction services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. 13. Closing date for a submission of a statement of capabilities The closing date and time for accepting statements of capabilities is 13 February, 2026, at 14:00 EST. 14. Inquiries and submission of statements of capabilities Inquiries and statements of capabilities are to be directed to: Kyle Sorrie DAP 2-2-7 Email: kyle.sorrie@forces.gc.ca