Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on July 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

ANTENNA ELEMENT

Closed
SPE7L3-26-T-138SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334220
New
SLED
Purchase of Signal Monitoring Solutions
Solicitation # IFB-060-3160803-SC
The County of Orange Sheriff-Coroner is soliciting bids under IFB-060-3160803-SC for the procurement of an integrated RF monitoring and geo-location system. The scope of work includes the delivery of a fixed-site system with six rack-mounted receivers, three additional receivers, a transportable RF monitoring system covering 70 MHz to 6 GHz, and an airborne receiver compatible with DJI Matrice 350 RTK drones covering 50 MHz to 6 GHz. The contract also requires a one-year technical support package featuring weekly RF interference reports, twenty hours of remote operational support, and two separate workweeks of on-site technical assistance and training. The contract will be awarded to the lowest responsive and responsible bidder, with a five percent price preference applied to certified OCLSB or DVBE bidders, capped at 100,000 dollars. Bidders must provide a valid UEI number, SAM.gov confirmation of no active exclusions, and a certificate of good standing from the California Secretary of State. Administrative requirements include payment terms of net 30 days in arrears via Electronic Funds Transfer and the provision of performance and payment bonds. The contractor must also comply with various federal and state regulations, including the Copeland Anti-Kickback Act, the Contractor Work and Safety Standards Act, and ADA non-discrimination requirements. All deliverables are subject to inspection and written acceptance by the County to ensure conformity with the specified scope of work.
Sheriff-Coroner

POSTED

about 15 hours ago

DEADLINE

in 20 days

AI Contract Overview

Show more

The contract specifies the procurement of an Antenna Element, identified by NSN 5985-01-443-1654 and part number 1007200G-10, manufactured by BAE Systems Information and Electronic, under solicitation SPE7L3-26-T-138S. A total of 25 units are required, each priced at $25.00, with delivery scheduled within 84 days to the DLA Distribution facility in New Cumberland, Pennsylvania, on a FOB Origin basis. The item is designated as a Critical Application Item and is subject to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Sampling for compliance must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels of VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Acceptance requires zero non-conformances unless otherwise noted. The contract incorporates all relevant technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which take precedence over commercial standards like ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA packaging requirements, with hazardous material handling governed by FED-STD-313 and IP025. The item is not required to be uniquely identified under DFARS 252.211-7003. Physical marking of the bare item is mandatory per RQ017, and cybersecurity compliance requires a CMMC Level 2 self-assessment. The contract is a total small business set-aside under NAICS 334220, with the response deadline set for August 10, 2026, and the required delivery date originally set for December 11, 2025, with a need ship date of May 19, 2026.

General Info

25 antenna elements, $25 each, FOB Origin, delivery by May 19, 2026, CMMC Level 2, small business set-aside.

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

1

RFQ SPE7L3-26-T-138S for DLA Land and Maritime

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Combined Synopsis

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUSA

Full Description

Show more
ANTENNA ELEMENT
ANTENNA ELEMENT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
BAE SYSTEMS INFORMATION AND ELECTRONIC 80249 P/N 1007200G-10
SPE7L3-26-T-138S
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7014579161 0001 EA 25.000
NSN/MATERIAL:5985014431654
DELIVERY (IN DAYS):0084
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
SPE7L3-26-T-138S
SECTION B
PR: 7014579161 PRLI: 0001 CONT’D
US
Need Ship Date:05/19/2026 Original Required Delivery Date:12/11/2025
SPE7L3-26-T-138S NSN/Part Number: 5985-01-443-1654 Quantity: 25 EA Purchase Request: 7014579161QTY: 25 Delivery: 84 days ADO

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-218F
Solicitation SPE7L3-26-T-218F is a fixed-price procurement issued by the DLA Land and Maritime, Land Supplier Ops Vehicle Support for the acquisition of four gaskets, identified by NSN 5330014187334 and Curtiss-Wright Electro-Mechanical Corp part number 316B1731-1. The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania by July 25, 2027, with a delivery timeline of 316 days. Shipping terms are established as FOB Origin, while both inspection and acceptance will occur at the destination. The procurement includes strict material and quality mandates, specifically prohibiting the use of asbestos per FED-STD-313 and the intentional addition of mercury. Due to the item's classification, it must be sealed in a medium duty, waterproof, greaseproof, opaque bag according to MIL-DTL-117, Type II, Class C, Style 1 to prevent UV deterioration. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. Compliance is required for several federal regulations, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding cybersecurity and safeguarding covered defense information. Offerors must be registered in the System for Award Management and are prohibited from using additive manufacturing processes unless specifically authorized. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 339991
New
DIBBS
GASKET, SPIRAL WOUND
Solicitation # SPE7L3-26-T-213T
Solicitation SPE7L3-26-T-213T is a fixed-price procurement issued by the Department of Defense, specifically the DLA Land and Maritime Land Supplier Ops Vehicle Support, for two spiral wound gaskets (NSN 5330-01-460-6673). The items must be supplied by Dresser Rand Co (P/N B645D115N09) and must be strictly free of asbestos. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds. The delivery is required within 244 days, with a need ship date of May 11, 2027, to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Shipping terms are FOB Origin under the First Destination Transportation program. Technical compliance requires adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Hazardous materials must be labeled according to the Hazard Communication Standard 29 CFR 1910.1200. Inspection and acceptance will occur at the destination per FAR 52.246-2. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. The solicitation is categorized under NAICS code 339991 and includes a HUBZone price evaluation preference. It also incorporates various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

2 days ago

DEADLINE

in 1 day
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS