This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on June 1, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Anti-Compromise Emergency Destruct (ACED) Ignition Block and Fire Assembly

Awarded

N0017420Q0054Federal

Submission Closed06/12/2020, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 325920

New

Federal

MJU-76/B Flare, Countermeasure

Solicitation # FA821326RB005-Solicitation

The Department of the Air Force is establishing a Multiple Award Contract (MAC) Indefinite Delivery Indefinite Quantity (IDIQ) for the production of MJU-76/B Thrusted Countermeasure Flares for the U.S. Government and Foreign Military Sales. This firm-fixed-price requirement features a five-year ordering period with a sixth-year option. The acquisition is anticipated to be other than full and open competition with limited sources. Due to the nature of the material, all offerors must possess a valid U.S. security clearance of Secret or higher and comply with the National Industrial Security Program Operating Manual. The government intends to award Basic IDIQ contracts to all qualified offerors who are determined responsible and rated acceptable on non-price technical factors. While the Basic IDIQ is unpriced, the first delivery order is anticipated as a buy-to-budget acquisition with an affordability cap ranging between approximately 9.4 million and 11.8 million dollars. Subsequent delivery orders will be awarded using a tradeoff methodology evaluating price and past performance, with CPARS ratings directly impacting the percentage of award splits. Contractors must adhere to stringent quality and safety standards, including ISO 9001-2015 and specific ammunition and explosives safety surveys. Key deliverables include the production units, Ammunition Data Cards via the WARP system, and First Article Testing of 250 units. Delivery timelines vary by price band, ranging from 12 to 24 months after receipt of order or first article approval. All shipments must comply with detailed hazardous material packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1.

POSTED

DEADLINE

1355-01-387-7738 T107 Suspension Band Set MK89 MOD 1

Solicitation # N0010426RK058

Solicitation N0010426RK058, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a competitive invitation for bids for the procurement of T107 Suspension Band Set MK89 MOD1 hardware. The requirement consists of a base quantity of 750 units with a one-year option for up to 80 percent of the total. This is a firm-fixed-price contract with deliveries destined for the NUWC Division Keyport in Washington. Key deliverables include the hardware, first article preproduction test samples, and specific technical data items A001 through A006. The contractor must adhere to strict quality standards, including ANSI/ISO/ASQ Q9001-2008 or equivalent, and follow MIL-STD-1168 for ammunition lot numbering and data cards. The government will utilize a best value trade-off analysis for the award, where non-price factors, specifically past performance in quality and timeliness of delivery, are significantly more important than price. Offerors must demonstrate a robust Quality Management System and a proven track record of meeting milestones to be eligible. Proposals must be submitted electronically by November 3, 2026, divided into four volumes: introductory, past performance, small business participation, and price. Special requirements include compliance with CMMC cybersecurity levels, Buy American regulations, and the provision of DoD unique identification for all items. Invoicing must be processed through the Wide Area Work Flow Receipt and Acceptance system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Pre-Solicitation Synopsis - B-1 Parts Reman FY27

Solicitation # FY27_B-1_Parts_Reman_Synopsis

The Department of Defense, through the Aflcmc Ebhk office at Hill Air Force Base, Utah, has issued a pre-solicitation synopsis for the procurement of B-1 aircraft parts and remanufacturing components for Fiscal Year 2027. This requirement, identified under solicitation number FY27_B-1_Parts_Reman_Synopsis and NAICS code 325920, seeks a provider for specific hardware including 72 Mode Selectors, 162 AND Gate Type I units, and 36 Sensor Assembly CAB units. Additionally, the contract requires the delivery of data in accordance with DD 1423-1. The primary delivery destination for the hardware is Tinker Air Force Base, Oklahoma, with a required delivery date on or before April 21, 2028. The data deliverable is required one month after the receipt of the order. There is no set-aside for this procurement, and all responsible sources are invited to submit a capability statement, proposal, or quotation. Interested parties must contact Britney Eggett by the response deadline of November 13, 2026.

POSTED

DEADLINE

Request for Information - Energetics Center of Excellence

Solicitation # W519TC-26-R-0019

Army Contracting Command-Rock Island, acting for the Portfolio Acquisition Executive Agile Sustainment and Ammunition and Project Lead Joint Services, is conducting market research to establish an Energetics Center of Excellence at the Blue Grass Army Depot in Richmond, Kentucky. The initiative seeks to address critical vulnerabilities in the Department of War energetics ecosystem, including aging infrastructure, fragile supply chains, and limited domestic capacity for explosives like RDX and HMX. The government is interested in transformative, commercially sustainable solutions delivered through a Public-Private Partnership that can scale rapidly during surge requirements without relying on recurring government funding for steady-state operations. Desired capabilities include onshoring production of precursors and components, implementing flexible and automated manufacturing, and accelerating the transition of next-generation formulations from lab to full-rate production. All physical infrastructure must be located at the Blue Grass Army Depot and must align with existing Army networks. The government is targeting a rapid implementation schedule of 48 months or less for full project transition and commissioning. While this is currently a Request for Information for market research, the government has indicated a potential intent to award a non-competitive, sole-source Undefinitized Contract Action with a Firm-Fixed-Price ceiling. Responses are due by November 2, 2026, and must include a technical approach, a Rough Order of Magnitude cost estimate, and a sustainable business model.

POSTED

DEADLINE

1377 - MT06 Cartridge Actuated Initiator

Solicitation # N0010427RK007

NAVSUP Weapon Systems Support Mechanicsburg is seeking eligible contractors to provide the labor, materials, and facilities necessary to manufacture the MT06 Cartridge Actuated Initiator, identified by NSN 1377-01-269-6496 and source control drawing 6260964. These components are critical for the egress system of the AH-64 helicopter. Due to a lack of available government data required for manufacture, the government intends to solicit and negotiate with two approved sources under the authority of FAR 6.302-1. This notice serves as a sources sought request rather than a formal request for competitive proposals. Interested and responsible sources are encouraged to submit capability statements by the response deadline of November 12, 2026. The government maintains sole discretion in determining whether to compete the contract based on the responses received, and contractors should be aware that source approval may be required prior to award.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

MD92: ME35: ME34/MT61: MT57: MT58: MT65: MD89

Solicitation # N0010427QK001

Solicitation N0010427QK001, issued by the Navsup Weapon Systems Support Mech, is a combined contract action for various supplies identified by multiple National Stock Numbers. The procurement involves specific quantities of items including MD92, ME35, ME34/MT61, MT57, MT58, MT65, and MD89. Due to the nature of the materials, the contract includes explosive ordnance items, necessitating a pre-award safety survey and adherence to DFARS 252.223-7002 regarding safety precautions for ammunition and explosives. The government intends to negotiate with a single source under FAR 6.302, though other responsible sources may submit capability statements. Key requirements include first article and production lot testing, as well as specific shipping terms where LAT and CDRLS are FOB Destination and deliverable items are FOB Origin. The response deadline is November 2, 2027, and the place of performance is located in Mechanicsburg, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Thin Layer Explosives (TLX)

Solicitation # W519TC26RA057

Solicitation W519TC26RA057 is a restricted Request for Proposal for a single Firm Fixed Price award to procure Thin Layer Explosive (TLX) and Detonating Cord Assembly (DCA) across multiple DODICS, including JL97, JL98, MU73, MU94, SS97, SS98, and SS99. Managed by the Department of Defense through ACC-RI, the contract requires the delivery of hardware, Lot Acceptance Testing (LAT), and various CDRLs within a base period of 24 months. To be eligible, offerors must provide a valid Qualification Acceptance Letter signed by an authorized Government engineer. Evaluation is based on a trade-off where technical factors, including the proposed project plan and delivery schedule, combined with past performance and small business participation, are significantly more important than price. The contract mandates strict adherence to technical standards, including MIL-STD-130 and MIL-STD-1168 for item marking and Ammunition Data Card (ADC) preparation. Unique Identification (UID) marking is mandatory for investigative units, and all organic materials must be fully traceable to the original equipment manufacturer. Contractors are required to submit a test plan within 60 days of award and must utilize the Wide Area Work Flow Receipt and Acceptance (WAWF-RR) system for invoicing and shipping reports. Compliance with cybersecurity standards, including CMMC and DFARS 252.204-7012, is required to safeguard covered defense information.

POSTED

DEADLINE

MJU-68/B INFRARED COUNTERMEASURE (IRCM) FLARE

Solicitation # FA821327RB00x

AFLCMC/EBHJC is conducting market research through a Sources Sought Synopsis to identify qualified manufacturers for the MJU-68/B Infrared Countermeasure (IRCM) Flare, NSN 1370-01-592-9246. The required product is a thrusted flare with an aluminum case measuring approximately 1.5 by 1.54 by 10 inches and a gross weight of about 1.66 lbs. These flares must be compatible for dispensing from an AN/ALE-47 dispenser and utilize BBU-35 or CCU-145 impulse cartridges for ejection and ignition. Prospective sources must operate under NAICS Code 325920 for Explosives Manufacturing and demonstrate the necessary experience and capability to manufacture the flare. To access technical drawings and documentation, vendors and all subcontractors must possess an approved DD Form 2345 and a Joint Certification Program certification number. The government is evaluating potential for a competitive procurement or a total Small Business Set-Aside, expressing specific interest in 8(a), Service-Disabled Veteran-Owned, HUBZone, and Women-Owned small businesses. Interested parties must submit a two-part response including a contractor description overview and answers to market survey questions regarding experience, risk mitigation, and teaming arrangements. Responses should highlight company certifications such as ISO-9001, ASI-9100, or CMMI. The submission deadline is November 6, 2026, and the effort is managed by the Department of Defense at Hill AFB, Utah.

POSTED

DEADLINE

FY27-31 WC864 Ball Powder

Solicitation # W15QKN26RA085

The Department of Defense, specifically the W6QK Acc-Ri-Picatinny office located at Picatinny Arsenal, New Jersey, is soliciting bids for the FY27-31 WC864 Ball Powder contract. This combined type procurement falls under NAICS code 325920 and is managed by the Army. Interested parties must submit their responses by the deadline of October 30, 2026. Primary coordination for this opportunity is handled by Gina Cuiffo, with Bethany Ficacci-Kretzmer serving as the secondary point of contact.

W6QK Acc-Ri-Picatinny

POSTED

DEADLINE

1355-01-436-4620 CWFP CABLE ASSY, ADCAP F/MK48 MODS 6 AND 7 TORPEDOES

Solicitation # N0010426RK022

Solicitation N0010426RK022, issued by the NAVSUP Weapon Systems Support Mechanics office, seeks a contractor to manufacture and deliver MK62 Mod 1 A Cable Assemblies (NSN 1355-01-436-4620) for use with ADCAP F/MK 48 Mods 6 and 7 Torpedoes. The requirement is a Firm Fixed Price arrangement involving the production of hardware according to drawing 6894510 Rev H, including first article preproduction samples for destructive testing and periodic production lot samples. Key deliverables include a test procedure, test/inspection reports, failure analysis, and monthly progress reports. The contract mandates strict adherence to quality standards, including ASQ-9000, ISO 9001, and MIL-STD-105, with 100 percent inspection required for critical characteristics. The government will award a single contract based on a best value trade-off analysis, where non-price factors, specifically past performance in quality and timeliness of delivery, are significantly more important than price. Offerors must demonstrate at least limited confidence in past performance to be eligible. Delivery schedules are based on days after contract award or first article test approval, with shipments directed to various naval facilities in Rhode Island, Washington, Virginia, and Hawaii. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with NIST SP 800-171 for cybersecurity and safeguarding of covered defense information. Following several amendments, the final response deadline was extended to November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Squibs for Fire Sprinkler Valves

Solicitation # N00174-27-SIMACQ-102-0051

The Naval Surface Warfare Center Indian Head Division intends to award a non-competitive, firm-fixed-price contract to Cartridge Actuated Devices, Inc. for the procurement of 50 squibs for fire sprinkler valves, specifically part number 074080-3. This action is being pursued as a sole source acquisition under FAR 13.106-1(b)(1) and 41 U.S.C. 1901, as the company is identified as the only source capable of meeting the government's requirements. The procurement falls under NAICS code 325920 for explosives manufacturing and FSC 1377 for cartridge and propellant actuated devices. While this notice is not a request for quotes, interested parties registered in the System for Award Management may submit capability statements to Contract Specialist Shannon Wooten by November 03, 2026, at 10:00 AM EST. The government will review these submissions to determine if a competitive procurement is warranted, though the final decision remains at the government's discretion.

Nswc Indian Head Division

POSTED

DEADLINE

EDRM - Enhanced Drogue Rocket Motor

Solicitation # FA8213-26-R-3036

Solicitation FA8213-26-R-3036 is a firm fixed price requirement issued by the Department of the Air Force, AFLCMC EBHK, for the procurement of Enhanced Drogue Rocket Motors (NSN 1377-01-591-8912 ES, DODIC JN19). These critical safety items, constructed from machined metal and plastic with energetic propellant, are used in ejection seats to provide necessary thrust for altitude gain. The procurement is designated as unrestricted, though Rockwell Collins Inc. has been identified as the sole source. The current requirement specifies 33 units for Lot 1, with delivery schedules set at 20 months after receipt of order for Lot 1 and 26 months for Lot 2. The contract mandates stringent quality and safety standards, requiring certification to ISO 9001-2015 and compliance with DoD 5100.76-M for safeguarding arms, ammunition, and explosives. Key deliverables include a comprehensive set of eleven Contract Data Requirements List items, such as Ammunition Data Cards and Lot Acceptance Test Plans. Due to the hazardous nature of the material, the contractor must adhere to rigorous packaging and marking standards, including MIL-STD-2073-1, MIL-STD-129, and specific hazardous material shipping regulations for UN0186. Inspection and acceptance will occur at the origin, with mandatory source inspection and the use of Wide Area WorkFlow for invoicing and receiving reports.

FA8213 Aflcmc Ebhk

POSTED

9 days ago

DEADLINE

in about 1 month

General Info

Agency

Department Of Defense → Nswc Indian Head Division

Contract Value

$109,155

NAICS

325920 - Explosives Manufacturing

Place of Performance

Indian Head, MD, 20640, USA

Set-Aside

NONE

Awardee

SYDOR INSTRUMENTS, LLC

Award Issued Date

05/22/2020, 12:00:00 AM UTC

Documents

ACED+-+CDRL+A001_COC+%28Signed%29.pdf

ACED+-+CDRL+A002_TEST+INSPECTION+%28Signed%29.pdf

ACED+-+CDRL+A003_SDS+%28Signed%29.pdf

ACED+-+CDRL+A004_TEST+INSPECTION+%28Signed%29.pdf

ACED+-+Form+16_First+Fire+Assembly.pdf

ACED+-+Form+16_Ignition+Block.pdf

ACED+-+Form+43.pdf

ACED+-+SPI-PHST-319+%28Ignition+Blocks%29.pdf

ACED+-+SPI-PHST-320+%28First+Fire+Assembly%29.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseAwarded

PostedApr 27

special-notice

Notice updatedJun 1

Notice type changed from Special Notice to Combined Synopsis/Solicitation. Response deadline changed from Apr 29, 2020 to Jun 12, 2020. The notice title changed. NAICS code changed from 33312 to 325920. The notice description changed. The point of contact changed.

AwardedMay 22

Contract was awarded

Submission Closed

06/12/2020, 04:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Nswc Indian Head Division

Contacts1 person available

OfficeINDIAN HEAD, MD, 20640-1533, USA

Organization / AgencyDepartment Of Defense → Nswc Indian Head Division

Office AddressINDIAN HEAD, MD, 20640-1533, USA

Contacts

Marlene Ridgell

contact@example.gov

Full Description

This is a combined synopsis/solicitation in accordance with FAR 5.201. This synopsis is prepared in accordance with guidance in FAR 5.207, and is prepared for the purpose of notifying potential offerors of an Firm Fixed Priced solicitation for supplies in support of the Naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology Division (NSWCIHEODTD). The Request for Quote (RFQ) N0017420Q0054 will be the only written solicitation, which will be issued, unless amended. The award will be made based on price. Quotes will be due by 12 June 2020 at 12:00 PM EST. The Naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology Division (NSWC IHEODTD) has a requirement for STATEMENT OF WORK 1.0 INTRODUCTION: The Naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology Division (NSWC IHEODTD) is pursuing procurement of Anti-Compromise Emergency Destruct (ACED) Ignition Blocks and ACED First Fire Mix. This procurement shall consist of manufacturing both the ACED Ignition Blocks and ACED First Fire Mix, Conducting Lot Acceptance Tests, and delivery to NSWC Indian Head. 2.0 SCOPE: The Contractor shall provide all labor, material, and facilities to manufacture the ACED Ignition Blocks and First Fire Mix. All test data and documentation shall be provided to NSWC IHEODTD. The government shall be provided the opportunity to witness any and all tests conducted. 3.0 TASKS/DELIVERABLES: 3.1 ACED IGNITION BLOCKS: The Contractor shall manufacture a total of three hundred and thirteen (313) ACED Ignition Blocks according to NAVSEA DWG. NO. 6260722. Quantity of two hundred and twenty-eight (228) Blocks will be shipped to NSWC IHEODTD, quantity of twelve (12) Blocks will be used for lot acceptance testing, and quantity of seventy-three (73) Blocks will be used for Hazard Classification Testing. The Ignition Blocks shall be manufactured in one lot. Cross blending of the Ignition Block mix is acceptable. Package Ignition Blocks in accordance with SPI-PHST-319. Safety Data Sheet (SDS) will be generated and delivered to NSWC IHEODTD. UN Series Six (6) Hazard Classification Testing will be conducted and a test report delivered to NSWC IHEODTD. 3.2 ACED FIRST FIRE ASSEMBLY: The Contractor shall manufacture a total of one hundred seventy-four (174) ACED First Fire Assembly according to NAVSEA DWG. NO. 6260715. DWG. 6260715 Find No. 1 Mil-B-117 shall be revised to Mil-DTL-117H Type 1, Class H, Style 2. Quantity of one hundred and fourteen (114) First Fire Assemblies will be shipped to NSWC IHEODTD, quantity six (6) First Fire Assemblies will be used for lot acceptance testing, and quantity of fifty-four (54) First Fire Assemblies will be used for Hazard Classification Testing. The First Fire Assemblies shall be manufactured in one (1) lot. Cross blending of the First Fire Mix is acceptable. Package the First Fire Mix in accordance with SPI-PHST-320. Safety Data Sheet (SDS) will be generated and delivered to NSWC IHEODTD. UN Series Six (6) Hazard Classification Testing will be conducted and a test report delivered to NSWC IHEODTD. 4.0 LOT ACCEPTANCE TESTING: The Contractor shall conduct a LAT by testing a combination of one (1) First Fire Assembly and two (2) Ignition Blocks. The Blocks and shall be positioned for test as depicted in the Ignition Destruct Package assembly drawing (NAVSEA DWG NO. 6260952). The Contractor shall use an igniter equivalent to the igniter assembly (NAVSEA DWG NO.6260725). The Igniter shall be used to ignite the First Fire Mix. Stand off distance between the Igniter and the First Fire Mix Assembly shall be 0.25 inches. Each LAT shall be recorded on a digital video disc (DVD) documenting the test set-up and test firing. The success criterion is successful ignition and complete consumption of both the First Fire Assembly and Ignition Blocks. Residue will be inspected to insure complete burn of both the First Fire Assembly and Ignition Blocks. 5.0 APPLICABLE DRAWINGS: Dwg No. Title 6260722 Ignition Block 6260715 First Fire Assembly 6260769 Ignition Material 6260754 Fluorel 6260952 Ignition Destruct Package 6260725 Igniter Assembly SPI-PHST-319 Ignition Block Special Packaging Instruction SPI-PHST-320 First Fire Assembly Special Packaging Instruction 6.0 DELIVERABLES: Certification of Compliance of the Ignition Blocks to the drawings and specification shall be provided to NSWC IHEODTD. (CDRL A001) Certification of Compliance of the First Fire Assemblies to the drawings and specification shall be provided to NSWC IHEODTD. (CDRL A001) Three hundred and thirteen (313) Ignition Blocks (DWG NO. 6260722) One hundred and seventy-four (174) First Fire Assembly (DWG NO. 6260715) Raw Material Certification shall be provided to NSWC IHEODTD. (CDRL A001) Three (3) copies of the LAT DVD shall be a deliverable to NSWC IHEODTD. (CDRL A002) SDS for both Ignition Blocks and First Fire Assemblies shall be a deliverable to NSWC IHEODTD. (CDRL A003) UN Series 6 Hazard Classification Test Report shall be a deliverable to NSWC IHEODTD. (CDRL A004) 7.0 PERIOD OF PERFORMANCE/SCHEDULE: The period of performance of this contract shall be six (6) months after award of the contract. 8.0 ADDRESS/POC FOR SHIPMENT: Class 1 Material shall be shipped to: Explosives Scales Facility ATTN: Daniel Michalek (+1 (555) 000-0000) 5021 Safe Haven Way Indian Head, MD 20640-5173 All Associated Documentation, DVD and LAT information: Attn: Daniel Michalek CAD/PAD Department 4393 Benson Road, Suite 120 Indian Head, MD 20640-5092 The North American Industry Classification System (NAICS) code is 325920 Explosive Manufacturing. This procurement includes unclassified controlled technical information assigned a restricted distribution statement which is export controlled. To receive this unclassified controlled technical information, an Offeror must be currently certified through the United States/Canada Joint Certification Program. To become certified for receipt of the technical documents, a U.S. Offeror must submit a completed DD Form 2345 to the U.S./Canada Joint Certification Office. Canadian Offerors may submit either a completed DD Form 2345 or DSS-MAS 9379 for certification. In addition, a copy of the company's State/Provincial Business License, Incorporation Certificate, sales Tax Identification Form or other documentation which verifies the legitimacy of the company must accompany all DD Form 2345s. Additional information on the Joint Certification Program and a checklist for completion of the DD Form 2345 is available at the following website: http://www.dla.mil/HQ/InformationOperations/Offers/Products/LogisticsApplications/JCP/. Offerors are encouraged to apply for certification as early as possible in order for processing and receipt of information to be completed in sufficient time to prepare a proposal before solicitation closing. Solicitations are ONLY available through download from SAM Beta at https://beta.sam.gov/. * All offerors must be registered in DOD's SAM (System Administrative Management www.sam.gov) with completed and up to date representations and certifications for the NAICS code provided in this synopsis within Online Representations and Certifications Application (ORCA at http://www.orca.bpn.gov). Copies of solicitations will NOT be emailed, faxed, mailed or provided in person. These requests WILL NOT BE ACKNOWLEDGED. It is the REGISTRANT'S responsibility to periodically check the Beta SAM website for the current status of the solicitation and possible amendments. Email all proposals to: Marlene Ridgell contact@example.gov