Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

APPLICATOR, COMPOUND BE

Active
SPE2DS-26-T-308NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The item is a sterile applicator impregnated with compound benzoic tincture, intended for external use as an adhesive adjunct to enhance the adherence of surgical tape and wound closure adhesives. Each applicator contains 0.66 cc of the tincture, packaged in a lot of 160 units, and is classified as flammable requiring storage below 40 degrees Celsius and protection from excessive heat and humidity. The product has a 60-month shelf life that is non-extendable, with no more than nine months allowed to pass between the manufacturer’s date and delivery to the government. Labeling must include the manufacturer date, expiration or retest date, contract number, and lot number, following the latest revision of MMS1A standards. The item is subject to defense packaging requirements and applicable covered defense information protocols. The supplier must provide the source and part number, and the NSN is 6510-01-594-5708. The solicitation was issued under contract SPE2DS-26-T-308N with a response deadline of August 10, 2026, and requires delivery within 20 days of award. The procurement is managed by the Department of Defense’s Medical Supply Chain under the NAICS code 322211.

General Info

Sterile benzoic tincture applicators, 0.66 cc each, 160 per lot, flammable, 60-month shelf life, defense packaging, NSN 6510-01-594-5708.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

322211 - Corrugated and Solid Fiber Box ManufacturingView NAICS

Place of Performance

PR: 7017722576 PRLI: 0001 CONT’D, FPO, AP, 96693, US

Set-Aside

NONE

Documents

(1)

RFQ SPE2DS-26-T-308N Medical Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Mary-Kathryn Donahue
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
APPLICATOR,COMPOUND BENZOIN TINCTURE IMP
APPLICATOR,COMPOUND BENZOIN TINCTURE IMPREGNATEDL
COMPOUND BENZOIN TINCTURE 160S; INTENDED FOR USE AS AN
ADHESIVE ADJUNCT, WHEN ENHANCEMENT OF SURGICAL TAPE AND/OR
ADHESIVE WOUND CLOSURE ADHESION IS DESIRED; FLAMMABLE;
STORE BELOW 40 DEG C (104 DEG F); AVOID EXCESSIVE HEAT AND
HUMIDITY; APPLICATOR STERILE UNLESS PACKAGE IS OPENED OR
DAMAGED; FOR EXTERNAL USE ONLY; 0.66 CC VIAL; PACKAGE OF 160
UNIT OF ISSUE: PG/160 EACH
..
SHALL HAVE A SHELF LIFE OF 60 MONTHS.
NOT MORE THAN 9 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURER TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH
THE LATEST REVISION OF MMS1A.
ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURER, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER.
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6510-01-594-5708 Quantity: 1 PG Purchase Request: 7017722576QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 322211
New
DIBBS
DRESSING, OCCLUSIVE,
Solicitation # SPE2DS-26-T-310X
The contract specifies the procurement of occlusive chest wound seal dressings, adhesive on one side, translucent, latex-free, and featuring a hydrophilic gel for secure adhesion. Each package contains two units, and the product must have a 36-month shelf life with no extensions permitted, and no more than five months may have elapsed between the manufacturer’s production date and delivery to the government. The item is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. Government identification must be removed from non-accepted supplies, and the product is identified by NSN 6510-01-581-0553 with a quantity of 20 packages totaling 40 units, ordered under purchase request 7017756518. Delivery is required within 20 days of award, and the solicitation, issued by the Department of Defense’s Medical Supply Chain, targets a performance location at Fort Campbell. The solicitation opened on August 5, 2026, with responses due by August 11, 2026, and is managed by point of contact Tiffany Parker. Defense information protection regulations apply, and the contract falls under NAICS code 322211 for paper product manufacturing.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 322211
New
DIBBS
PAD, ABDOMINAL
Solicitation # SPE2DS-26-T-308Z
The product is a sterile abdominal pad measuring 8 inches by 10 inches, designed with a nonwoven outer layer that wicks fluid into a cellulose core, which absorbs and laterally disperses fluids to prevent pooling. The pad features a hydrophobic back, sealed edges, and is constructed from nonwoven cloth in a rectangular shape. It is intended for absorbent use in medical settings and is packaged in units of 360 pads per package. The item is identified by NSN 6510-01-598-1988 and is subject to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Packaging must comply with DLA procurement standards, and government identification must be removed from non-accepted supplies. The solicitation is issued under SPE2DS-26-T-308Z with a response deadline of August 10, 2026, and a delivery requirement of 20 days after award. The contract is managed by the Department of Defense’s Medical Supply Chain through the Langley AFB performance location, with Seth Tootell as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 322211
New
DIBBS
Shipping Carton SupplyThe contract specifies the supply of double-wall fiberboard cartons compliant with ASTM-D-5118, Type CF, Style RSC, Grade 275, each designed to hold exactly 12 coats and sealed without the use of staples. The cartons must meet rigorous industrial standards for durability and construction, ensuring safe transport and handling of the specified contents. The requirement is issued as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid, reinforcing the focus on supporting small business participation in defense-related supply chains. The solicitation was posted on August 3, 2026, with a response deadline set for September 2, 2026, and is classified under NAICS code 322211, which corresponds to corrugated and solid fiberboard container manufacturing. The contracting organization is C AND T SUPPLY CHAIN, operating under the Department of Defense, with no specific location details provided for the place of performance or point of contact. The contract is accessible through the DIBBS platform, and all submissions must adhere strictly to the technical specifications and small business eligibility requirements outlined in the solicitation.
C AND T SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 322211
New
DIBBS
PAD, POST SURGICAL, O
Solicitation # SPE2DS-26-T-303K
The contract pertains to the procurement of post-surgical obstetrical pads designed with a poly backing for enhanced leakage protection, supplied in packages containing 12 bags of 14 pads each, totaling 168 units per package. The item is identified by NSN 6510-01-585-7696 with a purchase request numbered 7017711227, and delivery is required within 20 days of award. Bidders must specify the source and part number being offered to meet technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, which governs compliance based on the solicitation or award date. The contract includes additional provisions covering covered defense information, DLA packaging standards, and mandatory removal of government identification from non-accepted supplies. The solicitation, issued under number SPE2DS-26-T-303K on August 3, 2026, with a response deadline of August 10, 2026, is managed by the Department of Defense’s Medical Supply Chain, with performance directed to Fort Campbell, and all inquiries should be directed to the primary point of contact, Seth Tootell.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 322211
New
DIBBS
BANDAGE, GAUZE, IMPREGNA
Solicitation # SPE2DS-26-T-302Y
The contract specifies the procurement of sterile, antimicrobial impregnated gauze rolls measuring 4.5 inches by 4.1 yards, packaged in quantities of 100 per unit, identified by NSN 6510-01-587-9873. Each package must adhere to strict shelf-life requirements, including a mandatory 60-month shelf life that is non-extendable, with no more than nine months elapsed between the manufacturer’s date and the delivery date to the government. Labeling must include the manufacturer date, expiration or retest date, contract number, and lot number, all formatted in compliance with the latest revision of MMS1A. The product must meet all technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, and packaging must conform to DLA packaging guidelines. All supplies are subject to removal of government identification if rejected, and bidders are required to clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-302Y, is for a federal procurement through the Department of Defense with a response deadline of August 10, 2026, and requires delivery within five days of award to Beale AFB, CA, 95903-1908.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 322211
New
DIBBS
BANDAGE, ELASTIC
Solicitation # SPE2DS-26-T-302W
Elastic bandages meeting this specification are latex-free, sterile, and packaged in quantities of twenty per unit, with each bandage measuring six inches by five yards, constructed from cotton and plastic polyester. The product must have a thirty-six-month shelf life, and no more than five months may have elapsed between the manufacturer’s production date and delivery to the government. All packaging must display the manufacturer’s date, expiration or retest date, and the contract and lot numbers in compliance with the latest medical marking standards. The item is designated with NSN 6510-01-587-3214, with a total quantity of sixty-four packages required for delivery within twenty days of award. The contract, identified by solicitation number SPE2DS-26-T-302W, falls under NAICS code 322211 and is managed by the Department of Defense’s Medical Supply Chain. Technical and quality requirements are governed by the DLA Master List, and packaging must adhere to DLA standards. Government identification must be removed from non-accepted supplies, and the contract is subject to covered defense information protocols. All deliveries are to be made to Camp Pendleton, California, with point of contact Mary-Kathryn Donahue providing procurement oversight.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 322211
New
DIBBS
COMPRESS AND BANDAG
Solicitation # SPE2DS-26-T-303U
The contract specifies the procurement of 21 units of a trauma dressing labeled COMPRESS AND BANDAGE, each consisting of a 4-inch by 3-yard bandage with a sterile, non-adherent foam pad measuring 4 inches by 5 inches, in black color. The unit of issue is each (EA), and the product must have a shelf life of 36 months, with no more than five months elapsed between the date of manufacture and the date of delivery to the government. Packaging and compliance with Department of Defense logistics standards are governed by RP001 and RA001, which reference the DLA Master List of Technical and Quality Requirements, ensuring adherence to established technical and quality criteria. The National Stock Number is 6510-01-571-9729, and the purchase request number is 7017710734. Delivery is required within 20 days of award. The solicitation number is SPE2DS-26-T-303U, issued on August 3, 2026, with responses due by August 10, 2026, under NAICS code 322211. The contracting agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, with Kendall Jones listed as the primary point of contact. Government identification must be removed from any non-accepted supplies as required under RQ011.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 322211
New
SLED
2026 Augusta Nursery Direct Printed Boxes - Repost
Solicitation # QQ-125161
The Virginia Department of Forestry is soliciting bids for the furnishing and delivery of printed shipping boxes to be used at the Augusta Nursery located in Crimora, Virginia. The boxes must be directly printed in black ink using printing plates provided by the Department, ensuring brand consistency and regulatory compliance. This solicitation, numbered QQ-125161, is classified under NAICS code 322211, indicating it pertains to paperboard container manufacturing. The opportunity is open to all qualified vendors without set-aside restrictions, and responses are due by 7:00 PM on August 6, 2026, with the solicitation posted on August 3, 2026. All delivered boxes must meet specified quality standards and be shipped to the designated performance location at 90 Forestry Center Lane, Crimora, VA 24431. For inquiries or additional details, vendors should contact Brian Fox at the provided email and phone number.
Department of Forestry

POSTED

3 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 322211
New
DIBBS
PAD, ABDOMINAL
Solicitation # SPE2DS-26-T-298V
The contract solicitation SPE2DS-26-T-298V seeks sterile abdominal pads measuring 8 inches by 10 inches, designed with a nonwoven outer layer that wicks fluid into a cellulose absorbent center, which laterally disperses fluids to prevent pooling, a hydrophobic back, sealed edges, and a rectangular shape constructed of nonwoven cloth. The product is classified as a medical device and must be supplied in packages of 360 units, with packaging and labeling strictly governed by the DLA Master List of Technical and Quality Requirements, Medical Marking Standard No. 1, MIL-STD-129 for general marking, ASTM D3951 for non-hazardous packaging, and FED-STD-313 for hazardous material classification. The pads must be sterile, and all packaging must meet DLA Packaging Requirements for Procurement, including palletization and commercial shipping container standards. The point of delivery is Beale AFB, California, with FOB Destination terms, and delivery is required within 20 days after award. The item is procured under NSN 6510-01-598-1988, and the solicitation explicitly invokes RD003, indicating that the product may involve covered defense information, necessitating compliance with cybersecurity and information safeguarding requirements under DFARS 252.204-7012 and 252.204-7018, which prohibit certain telecommunications equipment and require safeguarding of covered defense information. The contract incorporates key FAR and DFARS clauses covering equal opportunity, combating human trafficking, employment verification, sustainable products, hazardous materials handling, inspection of supplies, default, subcontracting, and accelerated payments to small business subcontractors. Additionally, contractors must comply with restrictions on hazardous material storage and disposal, and must submit hazard warning labels and Safety Data Sheets where applicable. The solicitation requires offerors to provide a Unique Entity ID and CAGE code, represent their size status and socioeconomic classifications, and affirm compliance with all applicable federal regulations. Payment must be processed via Wide Area WorkFlow, and all proposals must be submitted electronically through DIBBS by the August 10, 2026 deadline. Despite the detailed technical and regulatory requirements, pricing, contract type, and award basis remain unspecified, and no evaluation factors, weights, or cost data are provided in the solicitation.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 322211
New
DIBBS
APPLICATOR, COMPOUND BE
Solicitation # SPE2DS-26-T-297S
The product is an applicator impregnated with compound benzoin tincture, intended for external use as an adhesive adjunct to enhance the adherence of surgical tape and wound closure adhesives. Each applicator contains 0.66 cc of the tincture and is sold in a package of 160 units. The item is flammable and must be stored below 40°C (104°F), avoiding excessive heat and humidity. It is sterile until the package is opened or damaged. The item has a 60-month shelf life from the date of manufacture, with no extensions permitted, and no more than nine months may elapse between manufacture and delivery to the government. Labeling must include the manufacturer date, expiration or retest date, and the contract and lot numbers, in compliance with the latest revision of MMS1A. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and packaging must adhere to DLA standards. The item is identified by NSN 6510-01-594-5708, and bidders must specify their source and part number. The contract solicitation, issued by the Department of Defense under medical supply chain management, has a response deadline of August 10, 2026, with delivery required within 20 days of award at Fort Hood, Texas.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 322211
New
DIBBS
DRESSING, OCCLUSIVE,
Solicitation # SPE2DS-26-T-299D
This contract specifies the procurement of occlusive chest wound seal dressings that are adhesive, translucent, latex-free, and feature a hydrophilic gel adhesive on one side with no venting mechanism. Each unit is packaged as a set of two, and the packaging must be resealable to protect the backup seal. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and the delivery date to the government. Compliance with RS020 is mandatory, enforcing strict shelf-life controls for this Type I (Code Q) item, and additional technical and quality requirements from the DLA Master List apply, governed by the revision in effect at the time of solicitation or award. Packaging must conform to DLA standards, and government identification must be removed from non-accepted supplies as per RQ011. The item is identified by NSN 6510-01-581-0553, with a quantity of five packages required under purchase request 7017693353, and delivery must occur within five days of award. The solicitation, issued under SPE2DS-26-T-299D on August 2, 2026, with a response deadline of August 10, 2026, is managed by the Department of Defense’s Medical Supply Chain, with performance required at Tinker AFB, Oklahoma, and primary point of contact being Tiffany Parker.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 322211
New
DIBBS
CLOTH, CHLORHEXIDINE GL
Solicitation # SPE2DS-26-T-295Q
The contract specifies the procurement of impregnated cloth products saturated with 2 percent chlorhexidine gluconate for preoperative patient skin preparation, each cloth equivalent to 500 mg of chlorhexidine gluconate and measuring 7.5 by 7.5 inches. These are alcohol-free, rinse-free, latex-free, and non-sterile applicator cloths, FDA-approved and packaged in individual sealed units with two cloths per package. Each bundle contains three such packages, and each case contains 32 bundles, totaling 96 packages per case. The unit of issue is per package, with a total quantity of three packages required under the procurement. All products must have a shelf life of at least 15 months, with no more than two months elapsed between the date of manufacture and the date of delivery to the government, and shelf-life markings must comply with the latest revision of Medical Marking Standard No. 1. Every package and shipping container must meet commercial packaging standards designed to prevent damage during transit, with exterior containers optimized for low-cost, safe delivery to Fort Bragg, North Carolina. Labels must include the manufacturer date, expiration or retest date, contract number, and lot number in accordance with Medical Marking Standard No. 1, superseding all references to MIL-STD-129. The product is identified by NSN 6510-01-620-9349, and bidders must provide source and part number. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date. The solicitation number is SPE2DS-26-T-295Q, with a response deadline of August 10, 2026, and delivery must occur within 20 days after award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
Disposable Tracheal Tube Stylets SupplyThe contract is for the supply of sterile, disposable tracheal tube stylets constructed with aluminum and PVC coating, specifically designed to fit endotracheal tubes with an inner diameter ranging from 7.5 mm to 10 mm for use in airway management procedures. These stylets are intended for single-use in clinical settings and must meet strict sterility and performance standards to ensure safe and reliable intubation. The procurement is issued as a subcontract under the NAICS code 339112, which classifies it within the medical equipment and supplies manufacturing sector. The offering is part of the Department of Defense’s Medical Supply Chain initiative, managed by the MEDICAL SUPPLY CHAIN MD SURG FSF, with performance required at Fort Stewart, Georgia, under the zip code 31314-5185. Responses to this solicitation must be submitted by August 11, 2026, with the request published on August 5, 2026, through the DIBBS platform. There is no set-aside classification specified, meaning the opportunity is open to all qualifying contractors without restrictions based on business size or ownership type. While no specific point of contact is listed, interested parties are directed to the public DIBBS link for full documentation and submission instructions. The stylets must conform to all applicable regulatory and technical specifications for medical devices, including sterility, biocompatibility, and mechanical integrity, to ensure compatibility with standard endotracheal tubes used in military and civilian healthcare environments.
Surgical and Medical Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
New
DIBBS
Data Retrieval Failed

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541611
New
DIBBS
Small Business and Socioeconomic Program RepresentationThis contract requires formal representation of business status under federal small business programs including Service-Disabled Veteran-Owned Small Business, Women-Owned Small Business, HUBZone, and 8(a) to ensure compliance with socioeconomic requirements. The task is administrative in nature, centered on verifying and documenting the company’s eligibility and standing within these programs to support subcontracting obligations under a Department of Defense initiative. The solicitation is for a subcontract with a NAICS code of 541611, indicating services related to management consulting, and the place of performance is specified as Hurlburt Field, Florida, with a zip code of 32544-5668. The contract was posted on August 5, 2026, and responses are due by August 11, 2026, providing a six-day window for submission. The procurement is managed under the Medical Supply Chain MD Surg FSF and can be accessed through the DIBBS platform.
Administrative Management and General Management Consulting Services

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334220
New
DIBBS
Defense Telecommunications Equipment Reporting (Compliance)This contract requires strict compliance with Department of Defense regulations concerning the disclosure of any covered defense telecommunications equipment or services supplied under the agreement. Contractors must identify and report all relevant hardware, software, and services, including full details of the manufacturer and original equipment manufacturer, to ensure alignment with DoD standards aimed at securing the defense telecommunications supply chain. Failure to accurately disclose this information may result in non-compliance and potential contractual consequences. The opportunity is classified as a subcontract under NAICS code 334220, focusing on telecommunications equipment manufacturing, and is tied to performance at HURLBURT FIELD, FL, with a strict response deadline of August 11, 2026. The contracting activity falls under the Department of Defense through the Medical Supply Chain MD Surg FSF office, indicating this requirement is part of a broader defense logistics or medical support initiative. All responses must be submitted via the designated DIBBS portal to meet federal acquisition and reporting obligations.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325998
New
DIBBS
Supply of Hazardous Material (Fire Extinguisher Recharge/Refill)The contract involves the supply and delivery of a hazardous fire extinguisher recharge agent identified by NSN 6515016268953, intended for use in military and federal operations. All packaging and labeling must strictly adhere to OSHA and MIL-STD-129 standards to ensure proper hazard communication, handling, and traceability throughout the supply chain. The material is classified as hazardous, requiring specialized handling procedures and compliance with federal safety and transportation regulations. Performance of the contract is located at HURLBURT FIELD with a postal code of 32544-5668, and the work falls under the NAICS code 325998 for other chemical product and preparation manufacturing. The solicitation is structured as a subcontract under the Department of Defense, managed by the MEDICAL SUPPLY CHAIN MD SURG FSF, and was posted on August 5, 2026, with a response deadline of August 11, 2026. There is no designated set-aside status, indicating the opportunity is open to all qualified vendors regardless of business size or ownership category. Interested parties must submit proposals through the DIBBS platform via the specified UI link. Timeliness and full compliance with hazardous materials regulations are critical, as non-compliance may result in rejection of the bid or contract termination.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325413
New
DIBBS
CONTROL, RESPIRATORY PA
Solicitation # SPE2DS-26-T-311F
The BioFire RP2.1/RP2.1plus Control Panel is a synthetic nucleic acid-based quality control product consisting of 12 vials, each containing 300 microliters of a non-infectious buffer solution with stabilizers and preservatives. It is designed for in vitro use with the FilmArray instrument to monitor the detection and identification of respiratory pathogens during RP2.1 panel testing. Each kit provides sufficient reagent for six quality control runs, including six positive and six negative controls. The product requires strict frozenstorage between -25°C and -15°C (-13°F to 5°F) and has a non-extendable shelf life of 18 months, with no more than two months allowed to have passed from the date of manufacture to delivery to the government. Labeling must include the date of manufacture, expiration date, contract number, and lot number in compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must meet commercial standards, ensuring protection against damage, with exterior containers suitable for safe transport at the lowest cost to the specified delivery point. The item is governed by DLA technical and packaging requirements, including RS013 for shelf life, RP001 for packaging standards, and RD003 for potential covered defense information. The National Stock Number is 6550-01-690-4435, with a procurement quantity of three kits under solicitation SPE2DS-26-T-311F, with a delivery deadline of 83 days after award.
In-Vitro Diagnostic Substance Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
GLOVE, PATIENT EXAMININ
Solicitation # SPE2DS-26-T-311L
The contract specifies the procurement of 10 packages, each containing 100 black, latex-free, powder-free nitrile exam gloves designed for special-forces operations. Each glove is large size, ambidextrous, non-sterile, and features a beaded cuff with a micro-roughened finish to enhance grip. The gloves have a palm thickness of 0.16 plus 0.03 millimeters, a palm weight exceeding 105 millimeters, and a length of 240 millimeters, classified as heavy-gauge for durability in demanding environments. The unit of issue is a package of 100 gloves, and the total quantity requested is 10 packages. Compliance with DLA packaging requirements and technical specifications referenced in the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision determined by the solicitation or award date. The government identification on non-accepted supplies must be removed per RQ011. The NSN is 6515-01-515-0197, associated with purchase request 7017754214, and delivery is required within five days of award. The solicitation, identified as SPE2DS-26-T-311L, was posted on August 5, 2026, with responses due by August 11, 2026, under NAICS code 339113 for medical device manufacturing. Performance is required at Fort Bragg, North Carolina, with primary point of contact Aidan Martz at the Department of Defense’s Medical Supply Chain.
Surgical Appliance and Supplies Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
DETECTOR, CARBON DIOXID
Solicitation # SPE2DS-26-T-310Q
The contract specifies the procurement of two carbon dioxide gas detectors, identified by NSN 6515-01-588-7389, for delivery to Fort Wainwright, Alaska, with a strict five-day absolute delivery obligation. Each unit must be individually sealed in a protective container to prevent damage or breakage and packed in commercial exterior shipping containers suitable for safe transport via common carrier at the lowest possible cost, with export packaging required if necessary. All packaging and marking must comply fully with Medical Marking Standard No. 1, replacing any reference to MIL-STD-129, and bidders are required to clearly state the source and part number being supplied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contract falls under NAICS code 334511 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with Brooke Webb as the primary point of contact. RD003 indicates potential covered defense information, and all supplies must adhere to DLA packaging requirements and the rule requiring removal of government identification from non-accepted items.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SUPPORT, ARCH
Solicitation # SPE2DS-26-T-311E
This contract solicits a pair of full-length corrective arch support devices designed for men’s sizes 10–11 and women’s sizes 11–12, to be worn inside shoes. The items are green in color and must meet technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date depending on acquisition size. The product is identified by NSN 6515-01-387-2743 and is requested in a quantity of two units, with delivery required within 84 days of award to APO ZIP 09227-0000. Bidders must clearly state the source and part number being supplied and comply with DLA packaging requirements, as well as the provision for removal of government identification from non-accepted supplies. The solicitation number is SPE2DS-26-T-311E, issued under NAICS code 339113 by the Department of Defense’s Medical Supply Chain organization, with a response deadline of August 11, 2026, and point of contact Elizabeth Cruz for inquiries. Covered defense information may apply, and all submissions must adhere to the specified acquisition protocols.
Surgical Appliance and Supplies Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SYRINGE, IRRIGATING
Solicitation # SPE2DS-26-T-311K
The item is a 60 cc irrigating syringe with dual graduations—marked in 5 cc increments up to 60 cc and in 1/4 oz increments up to 2 oz—featuring a catheter tip designed for surgical use in operating room procedures. It is autoclavable and supplied in hard pack, ensuring sterility and durability under repeated sterilization. Each unit must be individually sealed in a protected container to prevent damage or breakage, and shipped in commercial exterior containers suitable for safe transportation via common carriers at the lowest cost to the specified delivery point, which is Point Mugu, CA, 93042-0001. The packaging and marking must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and full compliance documentation is accessible through DLA Troop Support. The unit of issue is a package of 100 syringes, and the item carries a non-extendable 24-month shelf life as a Type I (Code M) item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date. The item is covered under Defense Information regulations and must be supplied with accurate source and part number information. The contract is issued under solicitation SPE2DS-26-T-311K with a bid deadline of August 11, 2026, and a delivery requirement of 20 days after order placement.
Surgical and Medical Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBE, TRACHEOSTOMY
Solicitation # SPE2DS-26-T-311B
The contract specifies the procurement of two Shiley Adult Flexible Tracheotomy Tubes with TaperGuard Cuff, each featuring a single cannula design, an inside diameter of 7.5 mm, an outside diameter of 10.8 mm, and an inner cannula inside diameter of 6.5 mm, with a cuff resting diameter of 25.4 mm. These are disposable, sterile, and must meet stringent shelf life requirements, including a maximum of 72 months from manufacture to expiration and no more than 10 months elapsed from manufacture to delivery to the government. The tubes are identified by NSN 6515-01-735-1484 and must be sourced with the exact part number, as specified in the solicitation. Packaging and delivery must comply with DLA Packaging Requirements, and all technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements. The contract is issued under solicitation SPE2DS-26-T-311B, with bids due by August 11, 2026, and delivery required within five days of award to the designated performance location at JBER, Alaska, 99506-4400. The primary point of contact is Brooke Webb from the Department of Defense’s Medical Supply Chain, and all submissions must remove any government identification from non-accepted supplies as per RQ011 requirements.
Surgical and Medical Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
GLOVES, CHEMICAL PROTEC
Solicitation # SPE2DS-26-T-310R
The gloves are chemical protective, made of nitrile, and designed to be disposable, non-sterile, powder-free, latex-free, silicone-free, and antistatic with a chlorinated surface and smooth exterior. They feature a beaded cuff, are colored green, and measure 240 millimeters or 9.5 inches in length with a palm thickness of 0.12 millimeters or 4.7 mils and finger thickness of 0.16 millimeters or 6.2 mils. Each unit is packed in a box containing 100 gloves and must comply with DLA packaging and technical requirements as specified in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The government identification must be removed from any non-accepted supplies. The item is identified by NSN 6515-01-693-8297 with a purchase request number of 7017739038, quantity of one box, and a delivery requirement of 20 days after award. The solicitation number is SPE2DS-26-T-310R, issued on August 5, 2026, with responses due by August 11, 2026, under NAICS code 339112, managed by the Department of Defense’s Medical Supply Chain MD Surg FSF office located in San Antonio, Texas, with Aidan Martz as the primary point of contact.
Surgical and Medical Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details