Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

AQUEOUS PARTS WASHER, SINK

Active
N6833526Q1179Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Naval Air Warfare Center Aircraft Division at Joint Base MDL, New Jersey, intends to procure a sink-type aqueous parts washer, Part Number A-40455-A, from Graymills Corporation, the sole qualified Original Equipment Manufacturer, to support initial stand-up requirements for the C-130 Kinston Depot project. This specialized equipment is essential for performing intermediate and depot-level maintenance on C-130 aircraft components, using a heated aqueous solution to manually remove dirt, grime, oil, and grease from steel parts. The acquisition is being conducted on a sole-source basis under Title 10, U.S.C. 3204(a)(1) and FAR 6.302-1(a)(2)(iii), as Graymills is the only source capable of meeting the technical and performance specifications required for this critical maintenance task. This notice serves as a presolicitation announcement for the procurement, identified by solicitation number N6833526Q1179, with responses due by July 27, 2026. While the government is not obligated to award a contract based on responses, all submissions received within the 15-day window will be considered to evaluate whether full competition is warranted. The item falls under NAICS code 332710 and will be delivered to Cape May Ch, New Jersey. All inquiries and submissions must be directed to Duane M. Hines at the provided contact information. This announcement is purely informational, does not constitute a solicitation, and no contractual commitment is implied by its issuance or by any response submitted.

General Info

Sole-source procurement of Graymills A-40455-A washer for C-130 depot maintenance, due July 27, 2026.

Agency

Department Of Defense → Navair Warfare Ctr Aircraft DivisionView Agency

NAICS

332710 - Machine ShopsView NAICS

Place of Performance

CAPE MAY CH, NJ, 08733, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navair Warfare Ctr Aircraft Division
Contacts1 person available
OfficeJOINT BASE MDL, NJ, 08733, USA
Organization / Agency
Department Of Defense → Navair Warfare Ctr Aircraft Division
View Agency Profile
Office AddressJOINT BASE MDL, NJ, 08733, USA

Full Description

Show more

The Naval Air Warfare Center Aircraft Division, Lakehurst, intends to solicit, negotiate and make an award on a sole-source basis with the Original Equipment Manufacturer (OEM), Graymills Corporation, CAGE CODE (26023) for the procurement of Part Number (PN): A-40455-A NIIN: 4920-01-570-3858 Nomen: Sink Aqueous Parts Washer required to meet initial stand-up for C-130 Kinston Depot project. This PN is required to perform Intermediate and Depot Level Maintenance tasks on C-130 type aircraft parts. This item is a sink-type, aqueous based parts washer which uses a heated solution to manually hand-clean dirt, grime, oil and grease from steel parts.


This acquisition is being pursued on a sole-source basis under the statutory authority of Title 10, U.S.C. 3204(a)(1) as implemented by the Federal Acquisition Regulation (FAR) 6.302-1(a)(2)(iii), only one responsible source and no other supplies or services will satisfy the agency requirements.


THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. However, all responses received within fifteen days after the date of publication of this synopsis will be considered by the Government. A determination by the Government not to open the requirement to competition based upon responses to this notice is solely within the discretion of the Government. Information received as a result of the notice of intent will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.


All questions and submissions in reference to this notice will be sent to the Point of Contact for this requirement, Duane Hines, Phone: (240) 577-9089, E-mail: duane.m.hines.civ@us.navy.mil.


THIS SYNOPSIS IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS, AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS IS STRICTLY VOLUNTARY.

Similar Contracts

NAICS: 332710
New
Federal
ASSEMBLY,DRAWER,TCDThis contract pertains to the procurement of the ASSEMBLY, DRAWER, TCD under solicitation number SPRMM126QKD28, issued by the Defense Logistics Agency (DLA) Mechanicsburg, with a response deadline of June 19, 2026. The requirement mandates full compliance with military specifications including MIL-STD-130 Rev N for item marking, and adherence to strict mercury-free standards to prevent contamination in naval environments, particularly submarines and surface ships. The contractor must ensure no metallic mercury or mercury compounds are present in materials, processing, or assembly unless explicitly approved with detailed documentation and warning labels. The item must be sourced under specified CAGE code and reference number, and any design, material, or part number changes require formal written approval with classification by code, accompanied by drawings and justifications. All quotations must include detailed quantity price breaks and identify the Original Equipment Manufacturer with CAGE code if the offeror is not the manufacturer. Technical data is not provided, and performance must occur only at the approved facility unless a written request for change is submitted with a $250 administrative cost reduction. Inspection and acceptance will occur at source per DLA Procurement Note E06, and all invoices and receiving reports must be submitted electronically via WAWF. Contractors are required to register for PIEE-Electronic Data Access to monitor contract actions and must comply with all packaging standards per MIL-STD-2073. Evaluation will follow the Lowest Price Technically Acceptable (LPTA) methodology, with award limited to authorized distributors who provide proof of authorization on company letterhead. Records of inspections must be maintained for one year after final delivery, and all contract documents are considered issued upon electronic transmission. Non-compliance with distribution control markings or export control requirements may result in rejection.
SPRMM1 DLA Mechanicsburg

POSTED

about 6 hours ago

DEADLINE

in 20 days
View Details