Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Architectural & Engineering Design Services Roof Replacement -Monroe Elementary

Active
39533State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Town of Monroe, Connecticut, through the Office of the First Selectman, is soliciting architectural and engineering design services for the total replacement of all roof areas at Monroe Elementary School. This project involves a variety of low-slope membrane and steep-slope roofing systems, as well as associated skylights, canopies, curbs, and drainage. The selected firm must evaluate existing conditions and recommend specific systems, assemblies, and warranties for each individual roof area. A critical requirement for grant eligibility is the provision of a minimum twenty-year unlimited warranty covering both material and workmanship for the entire system. Construction is anticipated for the Summer 2027 school recess, with the requirement that the building be watertight and ready for occupancy by the start of the following school year. This is a qualifications-based selection process, meaning no pricing information should be submitted with the initial Statement of Qualifications. Evaluation factors include comparable Connecticut public school roof replacement experience, familiarity with the Connecticut school construction grant program, and the qualifications of key personnel. Respondents must be licensed architects or professional engineers in the State of Connecticut and maintain professional liability insurance of at least 3 million dollars per claim. Submissions must include a signed original and an electronic PDF copy, limited to twenty pages, and are due by November 2, 2026, at 10:00 a.m. EST. The selected consultant will also be responsible for ensuring compliance with prevailing wage requirements and Commission on Human Rights and Opportunities standards for state-funded municipal public works.

General Info

Monroe, CT seeks architectural and engineering services for Monroe Elementary School roof replacement.

NAICS

N/A

Place of Performance

CT, USA

Set-Aside

NONE

Documents

1

RFQ 2026-07: Monroe Elementary School Roof Replacement Design Services

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyConnecticut → DAS Procurement
Contacts1 person available
OfficeCT, USA
Organization / AgencyConnecticut → DAS Procurement
Office AddressCT, USA
Contacts
Kerry McAndrewPrimary Contact

Full Description

Show more
Roof Replacement Project

More opportunities from Connecticut → DAS Procurement

Same awarding agency

New
SLED
GHTD RFP #01-027 Joint Procurement Paratransit Vehicles
Solicitation # RFP #01-027
The Greater Hartford Transit District (GHTD) is soliciting proposals under RFP #01-027 for the purchase and delivery of various paratransit vehicles to serve the District and other participating agencies in Connecticut. The procurement includes fully accessible standard cutaway chassis minibuses with lifts, Ford Transit type buses with lifts, low floor wheelchair accessible buses, and ADA lowered floor minivans with side entry ramps. These vehicles must be designed for durable, frequent stop-and-go operation in both urban and rural environments and must be fully ADA compliant. The contract requires the use of the heaviest duty available suspension, drive train, and engines to ensure maximum reliability. The evaluation process is based on a weighted scoring system: 30 points for experience and qualifications, 30 points for technical product design and performance, 20 points for technical approach and production schedules, and 20 points for the cost proposal, where the lowest bidder receives maximum points. Awarded contractors must adhere to strict quality assurance standards, including onsite inspections at manufacturing facilities and comprehensive pre-delivery testing for road performance, electrical load, and water leaks. Deliveries to the GHTD are Free On-Board (FOB) Destination to East Hartford, Connecticut. Compliance requirements are extensive, incorporating Federal Transit Administration (FTA) terms, 2 CFR 200, and the Americans with Disabilities Act. Contractors must comply with the Davis-Bacon Act, the Copeland Anti-Kickback Act, and equal employment opportunity laws. Required documentation includes a firm production schedule within 60 days of pre-production and the provision of comprehensive repair and parts manuals. Proposals must be submitted in a specific binder format with a page limit of 80 double-sided pages, using 12-point font. Pricing for vehicles and optional equipment must remain firm for 180 days.

POSTED

about 17 hours ago

DEADLINE

in 2 months
View Details
New
SLED
On-Call - Mechanical, Electrical, Plumbing, Fire Protection/Fire Alarm/Security
Solicitation # 012.2-OC.MEP30
The University of Connecticut, through DAS Procurement, is seeking Statements of Qualifications for an on-call program to provide design services for mechanical, electrical, plumbing, fire protection, fire alarm, and security systems. This master agreement covers the main campus at Storrs-Mansfield, regional campuses, UConn Health in Farmington, and other university properties. The scope of work includes system design for new construction or repairs, infrastructure and utility work, feasibility studies, diagnostic troubleshooting, and the preparation of working drawings and cost estimates. Individual assignments under this program will not exceed 1 million dollars and may be awarded as lump sum fixed fees or based on contracted hourly rates. This is a Quality-Based Selection process where the university may make multiple awards. Proposers must provide a professional engineering company license and at least one team member with a Connecticut Professional Engineering license, while LEED AP accreditation is preferred. Required submission documents include SEEC Form 10, an all-inclusive hourly rate form, and a supplier diversity certificate if applicable. Evaluation is based on technical and managerial ability, integrity, and a narrative of the project approach covering quality control and budgeting. The solicitation was posted on October 21, 2026, with a response deadline of November 18, 2026, and bids must be submitted through the HuskyBuy portal.

POSTED

about 17 hours ago

DEADLINE

in 27 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS