Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ARM, SLIDE VALVE, RUD

Active
SPE7L1-26-U-0623Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation is for the procurement of 120 units of the Arm-Slide Valve for Ruddevator Control, identified by NSN 3040-00-703-0304. The contract is a total small business set-aside issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-U-0623. The required delivery timeframe is 127 days after receipt of order. Manufacturing requires a metal casting process and specific tooling, with guidance available through DLA aviation or land and maritime supply chains. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 certification and the removal of government identification from non-accepted supplies. Additionally, the item is subject to ITAR or EAR export controls, requiring contractors to have approved JCP certification and completed export-control training to access technical data.

General Info

DoD procurement of 120 Arm-Slide Valves, small business set-aside, 127-day delivery timeframe.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336419 - Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

USA

Set-Aside

SBA

Documents

(1)

SPE7L1-26-U-0623.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
PAUL KELLEY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ARM,SLIDE VALVE,RUD
ARM-SLIDE, VALVE RUDDEVATOR CONTROL.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil. RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3040-00-703-0304 Quantity: 120 EA Purchase Request: 1000238625QTY: 120 Delivery: 127 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336419
New
Federal
Fin Cover
Solicitation # N68936-26-SIMACQ-D0AH250-0035
The Naval Air Warfare Center, Weapons Division, China Lake, intends to award a firm fixed price contract on a sole source basis for Platinum Software. The intended recipient is Advanced Engineering and Molding Technology, Inc., located in Riverside, California, as they are the only authorized distributor in the territory. This notice is an intent to sole source rather than a request for quotes, meaning no formal RFQ will be issued. Interested parties wishing to demonstrate their capability to perform the work must submit a concise capability statement to Miranda Zamarron by August 31, 2026, at 12 PM PST. All responses must reference solicitation number N68936-26-SIMACQ-D0AH250-0035. Additionally, all responsible sources must be registered in the System for Award Management database and certified through Defense Logistics Information Services to access controlled unclassified information.
Naval Air Warfare Center

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 336419
New
Federal
66--CONVERTER,WAVE FORM
Solicitation # SPE7M126T300J
DLA Land and Maritime is soliciting quotes for the procurement of five wave form converters under NSN 6625013316390. This combined solicitation, identified as SPE7M126T300J, is a total small business set-aside under NAICS code 336419. Delivery is required to DLA Distribution within 168 days after the order is placed. Approved sources for this requirement include 16331 63A141584P4, 24561 4538B, and 24561 63A141584P4. All responsible sources may submit electronic quotes by the deadline of August 31, 2026. No hard copies of the solicitation, specifications, plans, or drawings are available.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 6 days
View Details
NAICS: 336419
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-20RP
This contract solicitation, identified by number SPE4A6-26-T-20RP, is for the procurement of 12 Frame Assembly units, part number 13007725. The acquisition is designated as a Total Small Business Set-Aside under NAICS code 336419 and is managed by the ASC Commodities Division of the Department of Defense. The place of performance is located in Tracy, and the delivery timeline is set for 668 days after delivery order. The agreement includes rigorous technical and quality requirements, incorporating DLA packaging standards and tailored higher-level quality conformance inspections. Specific protocols are established for inspection and acceptance at the origin, the use of measuring and test equipment, and the removal of government identification from non-accepted supplies. Sampling procedures must adhere to MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans, with specific verification levels assigned to critical, major, and minor attributes. Furthermore, the contract contains strict export control provisions regarding technical data subject to ITAR or EAR regulations, requiring contractors to maintain approved US/Canada Joint Certification Program status and complete necessary training to access controlled information.
ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 336419
New
Federal
ICBM Bulkhead Assembly
Solicitation # SPRHA2-26-R-0039
The U.S. Air Force is seeking market information for a Bulkhead Assembly identified by NSN 1420-01-390-4419 AH and part number 23007735G1, with an estimated quantity of 40 units slated for delivery by April 29, 2027 to FB2029. This notice serves as a combined Request for Information and Synopsis, aimed at conducting market research to assess the availability of commercial or non-developmental items, promote small business participation, and enhance competition. The requirement is expected to be set aside entirely for small businesses under a Total Small Business Set-Aside as defined by FAR 19.5, with a NAICS code of 336419. While the government does not intend to use commercial item acquisition policies under Part 12, respondents are given 15 days to demonstrate if their offerings qualify as commercial items. All responsible sources may submit capability statements, proposals, or quotations before the August 7, 2026 deadline to be evaluated. The procurement is subject to Free Trade Agreements, and all inquiries must be directed to Kody Quayle at kody.quayle@us.af.mil. This announcement is not a solicitation for bids or proposals and does not obligate the government to award a contract or compensate respondents for information provided.
Ut DLA Aviation At Ogden

POSTED

6 days ago

DEADLINE

in about 1 month
View Details
NAICS: 336419
New
Federal
REQUEST FOR INFORMATION (RFI) Fair Share Sustainment Operations (FSSO) HAWK Missile System.
Solicitation # W314Q-R-27-A046
The U.S. Army Contracting Command – Redstone Arsenal is issuing a Request for Information (RFI) to identify qualified vendors capable of providing total system performance responsibility and comprehensive sustainment services for the Homing All Way Killer (HAWK) Missile System. This sources-sought notice, identified by solicitation number W31P4Q-27-R-A046 and NAICS code 336419, supports market research for a potential future acquisition under the Fair Share Sustainment Operations (FSSO) and Contract Logistics Services (CLS) programs. The government seeks firms with proven experience in logistics, engineering, material supply, test and product assurance, configuration management, technical documentation, and field support for HAWK missiles and associated Ground Support Equipment (GSE), including integration with Sentinel, NASAMS, and SHORAD systems. Support is required for Foreign Military Sales (FMS) and Building Partner Capacity (BPC) partner nations, as well as for U.S. Government-owned contractor-operated facilities at White Sands Missile Range, including the HAWK Support Center and Theater Readiness Monitoring Facility. Responses will inform the Army’s acquisition strategy and are not intended to commit the government to a contract or procurement. Interested firms must submit a statement of qualifications including their name, address, unique entity ID, CAGE code, verified SAM registration status, business size designation, and detailed evidence of expertise supporting HAWK systems, such as prior contract history with scope, quantity, contract numbers, and point of contact details. The performance work statement containing Controlled Unclassified Information is not included in the public notice and must be requested formally via email with a brief qualifications narrative. All submissions must be received by August 23, 2026 at 1:00 p.m. EST to Michael Weaver at micheal.e.weaver.civ@army.mil. This RFI is purely for planning purposes; no payment, obligation, or formal solicitation is implied by submission, and responses will not be treated as bids or proposals. Participation in this RFI does not guarantee eligibility for any future request for proposal, which will be independently posted on SAM.gov should it be issued.
W6QK Acc-Rsa

POSTED

6 days ago

DEADLINE

in 8 days
View Details
NAICS: 336419
New
DIBBS
TRANSDUCER, PRESSURE
Solicitation # SPE4A6-26-T-19TR
This contract is for the procurement of four pressure transducers, identified by NSN 1420016476590 and associated with part numbers from Johnson Controls Navy Systems and NGB Corp. The agreement is managed by the Department of Defense ASC Commodities Division under solicitation SPE4A6-26-T-19TR. Delivery is required within 171 days, with a need ship date of February 14, 2027, and a final required delivery date of April 10, 2027. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129, with packaging following ASTM D3951. Technical and quality requirements are governed by the DLA Master List, and the contract explicitly prohibits the use of Class I ozone-depleting chemicals. Inspection and acceptance will take place at the destination, and the quantity variance is set at plus or minus 0 percent.
ASC COMMODITIES DIVISION

POSTED

7 days ago

DEADLINE

in 1 day
View Details
NAICS: 336419
Federal
SWITCH, ENET, 8 POR
Solicitation # N0010426QAD11
This contract is a total small business set-aside solicitation issued by the Department of Defense, specifically the Navsup Weapon Systems Support Mech, for the manufacture and supply of an 8-port Ethernet switch. The required hardware is identified by part number FY12ME12770 (3CX85), which corresponds to the Netgear GS108-400NAS. The procurement is a fixed-price agreement with FOB-destination shipping and requires government source inspection. The contractor must adhere to strict military standards for marking, packaging, and configuration management, including MIL-STD-130, MIL-STD-1285, and MIL-STD-973. Quality assurance is the primary responsibility of the contractor, though the government reserves the right to perform inspections to ensure compliance. All inspection records must be maintained for 365 days following final delivery. The contract also mandates compliance with cybersecurity maturity model certification and specific security prohibitions and exclusions.
Navsup Weapon Systems Support Mech

POSTED

7 days ago

DEADLINE

in 8 days
View Details
NAICS: 336419
Federal
59--CLOTH,FIBERGLASS
Solicitation # SPE7M126U5383
This solicitation, issued by DLA Land and Maritime under solicitation number SPE7M126U5383, is for the procurement of fiberglass cloth identified by NSN 5999011843935. The requirement consists of 218 yards with a delivery window of 119 days after order. This is a total small business set-aside under NAICS code 336419, and the procurement may result in an automated indefinite delivery contract with a one-year term or a maximum aggregate total of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 32 units, with an estimated one order per year. Shipments will be delivered to various CONUS and OCONUS DLA Depots. Approved sources are listed as 0HHE1 1581 and 6H391 1581. All quotes must be submitted electronically by the deadline of September 2, 2026.
DLA Land And Maritime

POSTED

7 days ago

DEADLINE

in 8 days
View Details
NAICS: 336419
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A6-26-T-18SB
This contract is a solicitation for the procurement of 48 Gyro-Optics Assemblies under solicitation number SPE4A6-26-T-18SB, issued by the Department of Defense ASC Commodities Division. The project is designated as a Total Small Business Set-Aside with a delivery requirement of 456 days after order. Performance is located in New Cumberland, Pennsylvania, and the contract adheres to specific DLA master lists for technical and quality requirements, including strict packaging and marking standards. The agreement mandates rigorous quality assurance and sampling methods based on MIL-STD-1916 or ASQ H1331, requiring zero-based sampling plans for acceptance. Significant security and compliance obligations are in place, including CMMC Level 2 certification, the protection of covered defense information, and strict adherence to ITAR and EAR export controls. Access to technical data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training.
ASC COMMODITIES DIVISION

POSTED

8 days ago

DEADLINE

in about 12 hours
View Details
NAICS: 336419
Federal
ACU & UACU Repair, Sole Source to On-Point Defense Technologies
Solicitation # SPRRA2-26-Q-SP03-RFP
This solicitation, identified as SPRRA2-26-Q-SP03-RFP, is issued by the Department of Defense through the DLA Aviation office in Huntsville, Alabama. The contract focuses on the repair of ACU and UACU components and is designated as an 8(a) sole source procurement awarded to On-Point Defense Technologies. The work falls under NAICS code 336419 and will be performed in Fort Walton Beach, Florida. The request for proposal was posted on August 17, 2026, with a response deadline of August 27, 2026. Ava Lowman serves as the primary point of contact for this requirement. This procurement is specifically set aside for 8(a) participants in accordance with FAR 19.8 regulations.
Al DLA Aviation At Huntsville

POSTED

8 days ago

DEADLINE

in 2 days
View Details
NAICS: 336419
DIBBS
SHAFT, SUBASSY
Solicitation # SPE7M4-26-T-340U
This contract, identified as SPE7M4-26-T-340U, is for the procurement of six shaft subassemblies, part number 257733 from Eaton Aerospace, LLC. The items are identified by NSN 1420009615009 and are to be delivered to the DLA Distribution Depot Hill at Hill AFB, Utah. The delivery timeline is set for 158 days after order, with a need ship date of February 2, 2027, and an original required delivery date of January 4, 2029. The agreement mandates strict adherence to several technical and quality standards, including CMMC Level 2 self-assessment and the DLA Master List of Technical and Quality Requirements. Packaging must comply with ASTM D3951, MIL-STD-129, and RP001 requirements. The contract specifies that inspection and acceptance will occur at the destination, and the freight is delivered FOB Origin.
FLUID HANDLING DIVISION

POSTED

9 days ago

DEADLINE

in 2 days
View Details
NAICS: 336419
DIBBS
HEATER, THERMAL RELEASE
Solicitation # SPE7M2-26-T-6300
This solicitation, issued by the Department of Defense Nuclear Reactor Program under solicitation number SPE7M2-26-T-6300, is for the procurement of 13 units of thermal release heaters, identified by NSN 5999-00-623-1483. The contract requires delivery within 168 days after the order is placed, with performance located in Tracy, California. The agreement mandates strict adherence to DLA packaging requirements and the protection of covered defense information. Technical and quality standards are governed by the DLA Master List, and specific requirements are in place for bare item marking and the removal of government identification from non-accepted supplies. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions such as batteries or sensors. Offerors providing alternate parts must submit a complete data package for approval.
NUCLEAR REACTOR PROGRAM

POSTED

9 days ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 336330
New
DIBBS
WHEEL, SOLID RUBBER TIR
Solicitation # SPE7L1-26-T-01K5
This contract is for the procurement of 67 solid rubber tires, identified by NSN 2530-01-738-5293 and part number 24003207. The items are designated as critical application items and must adhere to a non-extendable shelf life of 120 months. The agreement prohibits the use of Class I ozone depleting chemicals and requires compliance with DLA packaging, marking, and shipping standards, including MIL-STD-129 and MIL-STD-2073-1E. Delivery is required within 75 days, with the original required delivery date set for August 20, 2026. The shipment is FOB Origin and will be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will take place at the destination.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333613
New
DIBBS
CLAMP, HUB
Solicitation # SPE7L1-26-T-947J
Solicitation SPE7L1-26-T-947J is a request for quotations issued by the Defense Logistics Agency (DLA) Land Supply Chain for the procurement of six hub clamps (NSN 3040-01-647-4730). This is a Foreign Military Sales requirement for India, with a delivery requirement of 20 days after the date of order and shipping terms set as FOB Destination. The government maintains inspection and acceptance authority at the point of origin. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and bar-coding. Due to the nature of the technical data, the requirement is subject to export controls under ITAR or EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification. Additionally, the contract incorporates cybersecurity requirements, including CMMC Level 2 certification and NIST SP 800-171 standards for safeguarding covered defense information. All invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 5 hours
View Details
NAICS: 332111
New
DIBBS
GUIDE, CAM FOLLOWER, FO
Solicitation # SPE7L1-26-T-946Y
Solicitation SPE7L1-26-T-946Y, issued by the Department of Defense Land Supply Chain via the Defense Logistics Agency, is a request for 64 units of Guide, Cam Follower, Folding Floor (NSN 5340-01-540-4920). The procurement is managed as an automated simplified acquisition with a required delivery date of April 7, 2027, and a delivery window of 116 days after the date of award. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality standards, including the Technical Data Package Rev D Gen 4 and specific Quality Assurance Provisions QAP 13873 and QAP 16236. Quality control requires sampling in accordance with MIL-STD-1916, ASQ H1331, or ASQ Z1.4, with a requirement for zero non-conformances. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and the contractor must provide a Certificate of Quality Compliance and Metal Certification. Invoicing is to be processed through the Wide Area WorkFlow system.
Iron and Steel Forging

POSTED

about 19 hours ago

DEADLINE

in about 5 hours
View Details
NAICS: 332722
New
DIBBS
STANDOFF, THREADED, SPAC
Solicitation # SPE7L1-26-T-01J7
This procurement contract is for the supply of 248 threaded spacing standoffs under National Stock Number 5340-01-197-5518. The delivery timeline is set for 168 days after the order is placed. The solicitation is managed by the Department of Defense Land Supply Chain agency, with performance located in New Cumberland, Pennsylvania. The contract mandates strict adherence to DLA packaging and quality conformance inspection requirements, including the submission of a Certificate of Quality Compliance. Contractors must comply with CMMC Level 2 certification and adhere to rigorous export controls under ITAR and EAR regulations. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-01W5
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 307 O-rings under National Stock Number 5331-01-682-6150. The contract requires delivery within 164 days after receipt of order and is categorized under NAICS code 336310. Performance is designated for New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, specifically regarding packaging and the removal of government identification from non-accepted supplies. Additionally, the contract prohibits the use of asbestos and Class I ozone-depleting chemicals in all delivered items, requiring that any substitute chemicals or materials be submitted for official approval.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-01X5
This solicitation, issued by the Department of Defense Land Supply Chain for the procurement of six access covers (NSN 5340-01-630-9200), is set aside for Women-Owned Small Businesses. The contract requires delivery within 150 days after receipt of the order and is categorized under NAICS code 332510. Performance is designated for New Cumberland, Pennsylvania. The agreement mandates strict adherence to several technical and quality standards, including CMMC Level 2 certification for third-party assessment organizations and specific DLA packaging and identification requirements. Notably, the contract involves export-controlled technical data subject to ITAR or EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the necessary data.
Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-01K1
This solicitation, issued by the Department of Defense Land Supply Chain, seeks 2,249 O-rings under solicitation number SPE7L1-26-T-01K1. The delivery requirement is 154 days after the order is placed, with a response deadline of August 31, 2026. Offerors are encouraged to provide quantity ranges to accommodate potential demand volatility and must provide specific manufacturer and source cage details for qualified products. Compliance requirements include strict adherence to domestic material restrictions such as the Berry Amendment and the Buy American Act, as well as a representation that no covered telecommunications equipment will be provided. Additionally, contractors must prepare for a transition to the Account Management and Provisioning System for Vendor Shipment Module access. Additive manufacturing is prohibited unless specifically authorized by the contracting officer.
Other Engine Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-01Z1
This solicitation, issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-01Z1, is for the procurement of 56 units of access covers, identified by NSN 5340-01-305-4410. The contract requires delivery within 128 days after receipt of the order and is subject to full and open competition. Performance is located in Texarkana, Texas, and the response deadline is September 4, 2026. The contract mandates strict adherence to several regulatory and technical standards, including CMMC Level 2 certification and DLA packaging requirements. It prohibits the use of Class I ozone-depleting chemicals and requires the removal of government identification from non-accepted supplies. Furthermore, the project involves technical data subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access sensitive information.
Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-945H
Solicitation SPE7L1-26-T-945H is a federal procurement issued by the Department of Defense, specifically DLA Land and Maritime, for the acquisition of 15 mounting brackets (NSN 5340-01-619-6797). The contract requires delivery to the DLA Distribution New Cumberland facility in Pennsylvania by February 2, 2027, with a delivery timeline of 165 days after the date of award. Inspection and acceptance are both designated to occur at the destination. The contractor must adhere to strict technical and quality standards, including MIL-STD-130N for item identification and MIL-STD-129 for marking and labeling. Packaging must follow ASTM D3951 for non-hazardous materials or TQ Requirement IP0025 for hazardous materials, with palletization complying with RP001. Special requirements include a total prohibition of Class I ozone-depleting chemicals and mandatory notification for any radioactive materials. All payment requests must be processed electronically through the Wide Area WorkFlow (WAWF) system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 5 hours
View Details
NAICS: 332510
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L1-26-T-01X7
This solicitation is for the procurement of 90 door handles under contract SPE7L1-26-T-01X7, designated as a total small business set-aside. The items must be manufactured using a metal casting process, which requires specific tooling. Delivery is required within 331 days after receipt of order, and the contract is managed by the Department of Defense Land Supply Chain. Compliance requirements include CMMC Level 2 certification and adherence to DLA packaging and quality standards. The contract strictly prohibits the use of Class I ozone-depleting chemicals. Additionally, the project involves technical data subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access sensitive information.
Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
RETAINER, HELICAL COMPR
Solicitation # SPE7L1-26-T-01Z5
This solicitation, issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-01Z5, is for the procurement of 250 units of Helical Compression Spring Retainers, identified by NSN 5340-01-296-9585. The contract requires delivery within 164 days after order and falls under NAICS code 332510. Performance is designated for New Cumberland, Pennsylvania. The contract includes stringent security and compliance mandates, requiring CMMC Level 2 certification and adherence to Covered Defense Information protocols. Due to the nature of the technical data, the project is subject to ITAR and EAR export controls, necessitating an approved US/Canada Joint Certification Program certification and specific DLA export-controlled technical data training. Additionally, suppliers must comply with DLA packaging requirements and the master list of technical and quality requirements.
Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
LEVER, MANUAL CONTROL
Solicitation # SPE7L1-26-T-01X2
This contract is a solicitation for the procurement of 30 units of Manual Control Levers, identified by NSN 5340-01-650-1868. The items are classified as critical application items and must be manufactured according to specific Army drawings and Technical Data Packages, including adherence to chemical agent resistant coatings and identification marking per MIL-STD-130N. The contract mandates compliance with DLA technical and quality requirements, CMMC Level 2 self-assessment, and the prohibition of Class I ozone-depleting chemicals. Delivery is set for 164 days after order, with a required delivery date of June 9, 2027, and a need ship date of February 16, 2027. Shipments must be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. Packaging must comply with MIL-STD-129 and RP001, with specific requirements for hazardous materials per FED-STD-313 or commercial packaging per ASTM D3951. Quality assurance is managed through certificate of conformance procedures unless otherwise specified.
Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details