Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Armor Plate Manufacturing and Supply

Active

Federal

Response Deadline08/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and supply of ten armor plates compliant with rigorous military standards for material composition, ballistic performance, and dimensional tolerances, ensuring suitability for high-threat operational environments. All plates must meet exacting specifications to guarantee consistent protection and interoperability with existing equipment, with performance validated through standardized testing protocols. The contract is classified as a subcontract under NAICS code 332313 and is managed by the Department of Defense through its DDSP New Cumberland Facility. Responses are due by August 20, 2026, with performance expected to be completed at the New Cumberland, Pennsylvania location bearing zip code 17070-5002. The solicitation, accessible via the DIBBS platform, does not specify a set-aside designation, and submission must fully align with technical and compliance requirements outlined in the official solicitation document.

General Info

Manufacture and supply ten military-grade armor plates meeting strict ballistic and dimensional standards for DoD use at New Cumberland, PA.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332313 - Plate Work ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of 10 armor plates meeting military specifications for material composition, ballistic performance, and dimensional tolerances.

Similar Contracts

Same NAICS industry code

Armor Plate Manufacturing and SupplyThe contract requires the manufacture and delivery of ten units of armor plate identified by NSN 9535017376349, with strict adherence to military specifications governing material composition, durability, and operational performance. All units must meet rigorous standards to ensure compatibility with defense systems and reliability under extreme conditions. The work is classified as a subcontract under NAICS code 332313, indicating specialized metal forging and stamping activities. Performance is designated to take place at the New Cumberland facility with a ZIP code of 17070-5002, and the contracting entity is the Department of Defense through its DDS New Cumberland Facility. Responses to this solicitation are due by August 20, 2026, with the posting date listed as August 9, 2026, providing a eleven-day window for qualified subcontractors to submit proposals. The contract is not subject to any set-aside provisions, making it open to all eligible bidders. While no point of contact or solicitation number is provided, the official bidding portal can be accessed via the DIBBS link. The focus remains on delivering a precise quantity of high-performance armor plate that fulfills critical requirements for military applications without deviation from mandated technical criteria.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Armor Plate Manufacturing and SupplyThe contract pertains to the fabrication and delivery of ten units of armor plate manufactured to meet rigorous military specifications covering material strength, precise dimensions, and operational performance standards. This subcontract is issued by the Department of Defense through its DDSP NEW CUMBERLAND FACILITY and requires compliance with the North American Industry Classification System code 332313, indicating specialized metal forging and stamping activities. The work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, leaving a narrow window for qualified vendors to submit proposals. All units must be fully compliant with defense-grade requirements and delivered in a manner that ensures readiness for immediate integration into military systems.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2040

The contract pertains to the procurement of ARMOR PLATE with NSN 9535017376339 and part number LS1155575, under solicitation SPE8E4-26-T-2040, requiring delivery of ten units within 164 days from the award date. The item is to be delivered FOB origin with no variance allowed in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization in accordance with DLA standards. The delivery address is the DDSP New Cumberland Facility in Pennsylvania, with the need ship date set for February 1, 2027, and the original required delivery date as February 5, 2027. The contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements and mandates compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment since Covered Defense Information applies. All documentation and source approval submissions must follow the specified procedures, including RC001 for SAR and RQ011 for removal of government identification from non-accepted supplies. Pricing is set at $10.00 per unit for a total of $100.00, with payment terms linked to the CLIN structure. The contract was posted on August 9, 2026, with a response deadline of August 20, 2026, under NAICS code 332313, managed by the Department of Defense through the DDSP New Cumberland Facility, with Pamela Duffey as the primary point of contact.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2038

This contract specifies the procurement of an aluminum alloy plate made from high magnesium aluminum, measuring 0.250 inches thick, 48.00 inches wide, and 240.00 inches long, with a reference weight of 276.48 pounds per unit. The material must conform to the technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, specifically referencing ASTM B928/B928M-15 Revision 2023, MIL-STD-129R, ASTM B666/B666M-20, and ASTM B660-23, alongside DLA reference drawings and quality assurance procedures. The plate must be supplied in whole-foot lengths only and meet exact dimensional tolerances with no test coupons permitted. All units must carry continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy grade and temper, manufacturer name, heat and lot number, and dimensions, applied via stamping or stenciling using non-contaminating, waterproof, and durable methods. Adhesive labels are permitted for smaller items under 0.250 inches nominal diameter. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support requirements for FSG 95 and 96; only approved QSLD suppliers are eligible for award, and any deviation from this requirement must be explicitly declared. Compliance with the QSL program waives certain inspection requirements such as COQC, PVT, and QAP-EQ003, subject to exceptions for Foreign Military Sales. A Certificate of Quality Compliance, or mill-material certification, is mandatory and must accompany each shipment and be forwarded to the contracted DLA Troop Support officer. Packaging must adhere to MIL-STD-2073-1E and Level A requirements of ASTM B660, with preservation and marking codes ZZ and Z applied as specified. The delivery is FOB origin with a required delivery date of December 9, 2026, for 15 units, subject to zero quantity variance. The contract is a total small business set-aside under NAICS code 332313, with all shipments directed to the DLA San Joaquin Distribution Center in Tracy, California, and must include dual-unit markings if applicable. Noncompliance with any requirement, including marking, packaging, or supplier

DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2039

The contract pertains to the procurement of 10 units of ARMOR PLATE with NSN 9535-01-737-6349 and part number LS1155574 under solicitation SPE8E4-26-T-2039, issued by the Department of Defense through the DLA Distribution facility in New Cumberland, Pennsylvania. The item must be delivered FOB origin within 164 days of contract award, with a required ship date of February 1, 2027, and an original delivery deadline of February 5, 2027. The quantity is fixed at 10 units with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specified methods for preservation, wrapping, cushioning, and unit containers, and all marking must adhere to MIL-STD-129 with no special marking codes applied. Palletization follows DLA packaging requirements, and transportation details are governed by DLAD procedural notes C19 and C20. This procurement is subject to cybersecurity compliance requirements under the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment, with covered defense information applicable, necessitating adherence to established cybersecurity controls. Technical and quality standards referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on acquisition size. Documentation requirements for source approval requests and the removal of government identification from non-accepted supplies must also be followed. The unit of issue is each (EA), priced at $10.00 per unit, totaling $100.00. The contract is classified under NAICS code 332313, and the point of contact is Pamela Duffey, with additional administrative oversight from Aaliyah Nuriddin. The procurement is managed through the DIBBS system with the official solicitation link provided.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2037

The contract pertains to the procurement of 10 units of ARMOR PLATE with NSN 9535-01-737-6312 under solicitation SPE8E4-26-T-2037, issued by the Department of Defense through the DDSP New Cumberland Facility. The unit price is $10.00 per item, resulting in a total contract value of $100.00, with no variance allowed in quantity. Delivery is required FOB origin within 164 days of contract award, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking required. Palletization follows DLA packaging requirements, and the shipment must be delivered to the specified parcel post address in New Cumberland, Pennsylvania. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment and applies to Covered Defense Information. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Transportation logistics are governed by DLAD Proc Notes C19 and C20. The contract is tied to a Federal NAICS code 332313 and was posted on August 9, 2026, with responses due by August 20, 2026. The original required delivery date is February 5, 2027, with a need ship date of February 1, 2027. Point of contact for the contract is Pamela Duffey, reachable via email and phone.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

FLOOR, BODY, VEHICULAR

Solicitation # SPE7L3-26-T-169T

The contract solicitation SPE7L3-26-T-169T calls for 20 units of a vehicular floor and body component identified by NSN 2510-01-598-1372, with a delivery deadline of 165 days after award. The requirement is subject to stringent technical and quality standards incorporated from the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect at the solicitation issue date. The contractor must be certified as a Cybersecurity Maturity Model Certification (CMMC) Level 2 Third-Party Assessment Organization, ensuring adherence to robust cybersecurity protocols. Quality control demands include configuration change management through Engineering Change Proposals and formal requests for variance, along with inspection and acceptance at origin. The item includes components governed by Qualified Products Lists or Qualified Manufacturers Lists, necessitating strict qualification compliance. Technical data associated with this procurement is subject to export controls under ITAR or EAR, restricting access and disclosure to authorized personnel only; contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and receive explicit DLA approval to handle controlled data. All foreign nationals, regardless of location or employer, are subject to these restrictions. Delivery performance is mandated at the specified location in New Cumberland, PA, with Viviane Kounkorgo designated as the primary point of contact for procurement inquiries.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

Supply of Parking-Related Materials and EquipmentThe contract is for the supply of parking-related materials and equipment, including bollards, gates, signage, and pavement markings, to be installed and maintained at Veterans Affairs parking facilities across Illinois. The work falls under NAICS code 332313, indicating it involves the manufacturing of metal structural components typically used in infrastructure, and is designated as a subcontract opportunity. All materials must meet specified standards for durability and compliance with federal facility requirements, and the successful vendor will be responsible for timely delivery and coordination of installation activities at multiple VA locations throughout the state. The solicitation was posted on August 7, 2026, with a response deadline of September 1, 2026, at 11:00 AM. The contract is managed by the 252-NETWORK Contract Office 12 under the Department of Veterans Affairs, and performance is limited to facilities located in Illinois. There is no set-aside designation, meaning the opportunity is open to all eligible suppliers regardless of business size or ownership type. Vendors must ensure compliance with federal procurement regulations and be prepared to support ongoing maintenance needs as part of the scope, with no specified point of contact provided for pre-submission inquiries, requiring full reliance on the official SAM.gov link for additional details.

252-NETWORK Contract Office 12 (36C252)

POSTED

DEADLINE

Commercial Supply of WashersDallas Area Rapid Transit is seeking commercial suppliers to provide flat washers measuring 1/2 inch with a zinc yellow finish, packaged in quantities of 10 each, under a subcontract agreement. The solicitation was posted on August 6, 2026, with a response deadline of August 11, 2026, at 7:00 PM. The NAICS code 332313 identifies the product category as other hardware manufacturing, indicating the focus is on standardized metal components. There is no set-aside designation specified, and the performance location and point of contact details are not provided. All responses must be submitted through the designated online portal at the provided link, and the contract anticipates delivery of the specified washers in compliance with the defined packaging and finish requirements.

Dallas Area Rapid Transit

POSTED

DEADLINE

Commercial Supply of Fasteners and HardwareThe contract titled Commercial Supply of Fasteners and Hardware involves the procurement of standard industrial hex bolts measuring 1/2-13 x 1 inch, rated Grade 8 with a zinc yellow finish, delivered in standardized packages of ten units each. This is a subcontract opportunity issued by Dallas Area Rapid Transit under the NAICS code 332313, with a posted date of August 6, 2026, and a firm response deadline of August 11, 2026, at 7:00 PM. The work is to be performed in Texas, though no specific city or address is provided for performance or contact details. The solicitation does not specify a set-aside type or additional eligibility requirements, leaving participation open to qualified suppliers without preferred status designations. Interested vendors must submit responses prior to the deadline through the referenced online portal to be considered for award.

Dallas Area Rapid Transit

POSTED

DEADLINE

Fencing Materials Supply

National Operations Center

POSTED

DEADLINE

in about 1 month

53--CAP,PROTECTIVE,DUST AN

Solicitation # SPE7M426T317V

The contract solicitation is for 12 units of protective dust caps with NSN 5340010434078, to be delivered to the DLA Distribution Depot Hill within 168 days of award. The approved source is specified as 18740 SK3806-9, and the procurement is conducted through a Request for Quote, with no hard copies available—only electronic submission is permitted. The solicitation, identified by number SPE7M426T317V, is a Small Business Set Aside under NAICS code 332313, meaning only qualified small businesses may respond. All responsible sources may submit quotes if received by the deadline of August 17, 2026, but no specifications, plans, or drawings are provided. The procurement is managed by the Department of Defense through DLA Land and Maritime, with the office located in Columbus, Ohio. Questions must be directed via email to the designated point of contact, and the full solicitation document must be accessed electronically through the SAM.gov link provided.

DLA Land And Maritime

POSTED

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

Hazardous Materials Compliance & Labeling

Other Scientific and Technical Consulting Services

POSTED

about 4 hours ago

DEADLINE

Precision Cutting and Kitting Services

Fabricated Structural Metal Manufacturing

POSTED

about 4 hours ago

DEADLINE

Cold-Finished Steel Flat Bar Supply

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 4 hours ago

DEADLINE

Rubber Seals and Gaskets SupplyThe contract is for the supply of nonmetallic special-shaped rubber sections intended for defense or industrial applications, requiring full manufacturing capabilities along with proper packaging and FOB Origin shipping in strict compliance with military specifications. The components, described as rubber seals and gaskets, must be produced to exacting standards to ensure performance in demanding operational environments. The work is subcontracted under NAICS code 326220, which classifies rubber product manufacturing, and is managed by the Department of Defense through its DDSP New Cumberland Facility, with performance required at the 17070-5002 location in New Cumberland. All deliveries must meet defined military criteria and be shipped from the manufacturer’s facility, placing responsibility for logistics and quality control squarely on the contractor. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is part of a broader procurement effort to support critical defense and industrial infrastructure needs.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 4 hours ago

DEADLINE

Packaging, Marking, and Bar-Coding ServicesThe contract requires the provision of packaging, preservation, labeling, and bar-coding services for butterfly valves in full compliance with MIL-STD-2073-1E and MIL-STD-129 standards, including adherence to hazard communication requirements. All materials must be properly preserved to prevent damage during storage and transit, labeled according to military specifications, and barcoded for accurate tracking and inventory management throughout the supply chain. The work must be executed to meet the rigorous defense logistics protocols governing the handling and identification of military-grade components. This subcontract is issued by the Department of Defense through the DDS New Cumberland Facility, with performance required at the location in New Cumberland, Pennsylvania, zip code 17070-5002. Responses are due by August 20, 2026, and the North American Industry Classification System code applicable to this solicitation is 493190, indicating it falls under other warehousing and storage services. The contract involves precise execution of defense logistics standards to ensure full operational readiness and traceability of butterfly valves within the military supply system.

Other Warehousing and Storage

POSTED

about 4 hours ago

DEADLINE

First Article Testing (FAT) ServicesThe contract requires the performance and documentation of First Article Testing for butterfly valves, encompassing dimensional, material, and functional testing to ensure compliance with specified requirements. The successful bidder must deliver a detailed test report documenting all results, confirming that the valves meet all applicable standards and specifications before proceeding with full production. Testing must be conducted according to established protocols, with complete traceability and rigorous documentation to support validation. The solicitation is classified as a subcontract under NAICS code 541380 and is issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance required at a location in NEW CUMBERLAND, Pennsylvania, with zip code 17070-5002. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. All submissions must be completed through the designated DIBBS platform prior to the deadline to be considered for award.

Testing Laboratories and Services

POSTED

about 4 hours ago

DEADLINE

Butterfly Valve Manufacturing and SupplyThe contract involves the manufacture and delivery of 23 butterfly valves to meet strict military standards, encompassing full production, rigorous quality control, proper packaging, and precise marking requirements. All work must adhere to the technical and compliance specifications mandated by the Department of Defense, ensuring the valves are suitable for defense applications. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where final delivery and acceptance will occur. The solicitation falls under the NAICS code 332911, classifying it as other fabricated metal product manufacturing, and is structured as a subcontract opportunity. The response deadline is August 20, 2026, with the solicitation posted on August 9, 2026, providing a 11-day window for potential vendors to submit proposals. The contracting activity is conducted through the DDSP New Cumberland Facility, a U.S. Department of Defense entity responsible for managing defense-related procurement logistics.

Industrial Valve Manufacturing

POSTED

about 4 hours ago

DEADLINE

Solenoid Valve Supply and DeliveryThe contract pertains to the supply, packaging, and delivery of a solenoid valve with National Stock Number 4810009927036, manufactured to meet stringent military specifications for integration into critical defense systems. The item must be delivered in full compliance with required performance, durability, and environmental standards appropriate for military applications, with packaging protocols ensuring integrity during transit and storage under demanding conditions. The contract is issued as a subcontract under the Department of Defense, specifically through the DDSP NEW CUMBERLAND FACILITY, with performance obligated at the New Cumberland location, zip code 17070-5002. The solicitation, classified under NAICS code 332912 for other fabricated metal product manufacturing, was posted on August 9, 2026, and responses are due by August 20, 2026. All offerings must be submitted through the DIBBS platform to be considered, and contractors are expected to adhere to defense procurement protocols without any set-aside provisions specified for small business or other socioeconomic categories.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

Quality Assurance & Inspection SupportThe contract requires the performance of pre-shipment quality inspections to verify that products meet the stringent standards outlined in the DLA Master List, ASTM D3951, and MIL-STD-129 for marking and packaging compliance. These inspections are critical to ensuring that all items intended for military use are properly labeled, packaged, and documented in accordance with Department of Defense requirements. The work must be performed in alignment with established defense logistics protocols to guarantee readiness and reduce the risk of non-compliant shipments entering the supply chain. This subcontract is issued by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with performance centered at the New Cumberland location, zip code 17070-5002. The solicitation falls under NAICS code 541330, indicating it is related to professional, scientific, and technical services, specifically in the area of quality assurance and inspection support. Proposals must be submitted by the response deadline of August 20, 2026, following the posting date of August 9, 2026. All potential offerors should be prepared to demonstrate capability in executing precise, repeatable quality control processes under federal defense standards, with an emphasis on traceability, accuracy, and adherence to military specification requirements.

Engineering Services

POSTED

about 4 hours ago

DEADLINE

Transportation & Shipping of Regulated MaterialsThe contract entails the transportation and delivery of non-wood timber materials, including hazardous substances, to Department of Defense destinations within 35 days after contract award, strictly adhering to Defense Logistics Agency and DoD shipping regulations. All shipments must comply with federal standards for handling, labeling, and transporting regulated and hazardous materials, ensuring safety, traceability, and full documentation throughout the supply chain. The performance location is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the work falls under NAICS code 484220 for general freight trucking. This is a subcontract awarded by the DDSP New Cumberland Facility under the Department of Defense, with a response deadline of August 20, 2026, and a posted date of August 9, 2026. Bidders must be prepared to meet stringent compliance requirements for hazardous material transport, demonstrate proven capability in military logistics, and ensure on-time delivery within the 35-day window. The solicitation is accessible via the DIBBS platform and does not specify a set-aside status, meaning eligible contractors of any size may respond provided they meet all technical and regulatory stipulations.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract involves the preparation and submission of hazard warning labels and Safety Data Sheets for hazardous materials that are not regulated under FIFRA or FDA, ensuring full compliance with OSHA standards and DFARS requirements. This work is critical for maintaining safety and regulatory adherence in environments where chemical handling and storage are subject to federal workplace safety mandates. The services required include accurate classification, labeling, and documentation of hazardous substances to support safe transport, handling, and use by personnel across Department of Defense operations. The contract is classified as a subcontract under NAICS code 541690, and it is associated with the DDSP NEW CUMBERLAND FACILITY under the Department of Defense. Performance is required at the location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 9, 2026, and responses must be submitted by August 20, 2026. While no specific set-aside designation or point of contact is provided, the urgency and specificity of the compliance requirements necessitate a contractor with demonstrated expertise in hazardous materials documentation, OSHA labeling protocols, and defense acquisition regulations.

Other Scientific and Technical Consulting Services

POSTED

about 4 hours ago

DEADLINE

Non-Wood Timber/Lumber SupplyThe contract requires the supply of 800 units of non-wood timber/lumber identified by NSN 5675015914344, with strict adherence to DLA packaging, marking, and hazardous material labeling standards to ensure compliance with military logistics protocols. This subcontract is issued by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with performance required at the location in NEW CUMBERLAND, PA, zip code 17070-5002. The solicitation was posted on August 9, 2026, and responses must be submitted by August 20, 2026. The NAICS code 321999 indicates this falls under other wood product manufacture, though the product itself is non-wood, suggesting a specialized industrial classification. All deliveries must meet the defined DLA specifications without exception to maintain supply chain integrity and safety standards.

All Other Miscellaneous Wood Product Manufacturing

POSTED

about 4 hours ago

DEADLINE