Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

ARMOR, SUPPLEMENTAL,

Active
SPE4A7-26-T-606GFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for one unit of supplemental armor for small arms fragmentation, sourced from Foster-Miller, Inc. with CAGE code 30233 and NSN 1560-01-434-6349, under solicitation number SPE4A7-26-T-606G. Delivery is required within 20 days FOB origin to North Kingston, Rhode Island, with no tolerance for quantity variance. The item is designated as a critical application and must comply with stringent technical and quality standards referenced from the DLA Master List, including ISO 9001:2015 for quality management and MIL-STD-1916 or comparable zero-based sampling plans for inspection, with zero non-conformances required unless otherwise specified. The supplier must adhere to rigorous packaging directives including MIL-STD-2073-1E and MIL-STD-129 for marking, while also following Qinetiq Packaging Instruction 1210300059 and DLA packaging requirements. Item Unique Identification is not required per customer request, and government identification must be removed from non-accepted supplies. Cybersecurity Maturity Model Certification Level 2 self-assessment is mandatory, and hazardous materials shipping procedures must be followed per IP025. Shipping must occur via the fastest traceable means—parcel post is explicitly prohibited. The contract includes detailed inspection and acceptance at destination and specifies the responsible government point of contact as April Reed of the Department of Defense, with an original required delivery date of June 2, 2026.

General Info

One unit of supplemental armor for small arms fragmentation, due June 2, 2026, FOB origin, zero non-conformances, strict quality and packaging standards.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

5 AIRLIFT LN BLDG 5, NORTH KINGSTOWN, RI, 02852-7538, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-606G.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
April Reed
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ARMOR,SUPPLEMENTAL,
FOSTER-MILLER, INC
CAGE 30233
ARMOR,SUPPLEMENTAL, SMALL ARMS-FRAGMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
FOSTER-MILLER, INC. 30233 P/N 50551134
SPE4A7-26-T-606G
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017030830 0001 EA 1.000
NSN/MATERIAL:1560014346349
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGING SHALL BE IN ACCORDANCE WITH QINETIQ PACKAGING INSTRUCTION 1210300059 AIRCRAFT MATS AND PANELS
MARKINGS SHALL BE IAW MIL-STD-129
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
FB6391
FB6391 143 AW LRS LGRDD
CP 401 267 3307
5 AIRLIFT LN BLDG 5
NORTH KINGSTOWN RI 02852-7538
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB6391
SPE4A7-26-T-606G
SECTION B
PR: 7017030830 PRLI: 0001 CONT’D
FB6391 143 AW LRS LGRDD
CP 401 267 3307
5 AIRLIFT LN BLDG 5
NORTH KINGSTOWN RI 02852
US
M/F: (TCN) FB639161480054
RDD: 179
PROJ: TP 2
SUPP ADD: YBQ738 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:06/02/2026
SPE4A7-26-T-606G NSN/Part Number: 1560-01-434-6349 Quantity: 1 EA Purchase Request: 7017030830QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
PLUG, INLET, HIRSS
Solicitation # SPE8EF-26-T-1538
The contract pertains to the procurement of one unit of a PLUG, INLET, HIRSS with NSN 1730-01-246-6758 and part number 70700-20514-042, supplied by SIKORSKY AIRCRAFT CORPORATION and AIRBORNE INDUSTRIES INC. Delivery is required within 20 days from the contract award, FOB origin, with no variance allowed in quantity. The item is designated as a critical application item and must comply with Item Unique Identification (IUID) standards per MIL-STD-130 and the DFARS 252.211-7003 clause. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes other standards such as ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and DLA packaging regulations, with palletization following RP001 guidelines. Sampling for acceptance follows the SIKORSKY CORP QAP 1201 alternative plan, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The item must be shipped via the fastest traceable method, excluding parcel post, with delivery directed to a designated U.S. Army facility in Boise, Idaho. The shipment is identified by RDD 777 and is tied to project TP 3 under contract SPE8EF-26-T-1538. The original required delivery date is August 3, 2026, and the contract includes provisions for configuration change management, variance requests, removal of government identification from non-accepted supplies, and compliance with measuring and test equipment standards. All documentation and compliance actions are subject to the DLA Master List revision effective on the solicitation date.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
HARNESS, ENGINE, LH, A
Solicitation # SPE4A5-26-T-318P
The contract pertains to the procurement of three engine left-hand harnesses, part number 209-375-105-101, under solicitation SPE4A5-26-T-318P, with a delivery requirement of 398 days and an original ship date of September 13, 2027. The item is source-controlled, meaning it must be manufactured and tested strictly in accordance with limited rights data held by approved sources, primarily First Electronics Corp. with CAGE code 14532, and no other vendor may quote without prior source approval and submission of a Source Approval Request package. Inspection and acceptance occur at origin, following MIL-STD-1916 or equivalent zero-based sampling plans with stringent acceptance criteria: critical attributes require a zero-defect standard, major attributes are sampled at AQL 1.0, and unspecified attributes are treated as major. The item is classified as a critical application and is subject to DLA’s Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA packaging guidelines, with no variation permitted in quantity. The contract includes cybersecurity compliance requirements under CMMC Level 2 self-assessment and mandates physical identification marking per RQ017. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, PA, with all documentation, traceability, and testing records retained by the supplier. The unit of issue is each (EA), priced at $3.00 per unit for a total value of $9.00.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
UPLOCK ASSEMBLY, SWA
Solicitation # SPE7LX-26-U-9124
The contract pertains to the procurement of a UPLOCK ASSEMBLY, SWAYBRACE with NSN 1095012849952 and part number 116018-1, supplied by L3HARRIS TECHNOLOGIES, INC. under solicitation SPE7LX-26-U-9124. Six units are required at a unit price of $6.00, totaling $36.00, with delivery required within 21 days FOB origin. The item is classified as a critical application item and falls under DLA DIRECT, CONUS coverage. The contract incorporates mandatory technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization strictly adhering to specified guidelines. The Government prohibits acceptance of surplus stock, and any non-accepted supplies must have government identification removed. Demilitarization procedures for Category I munitions items apply, and the supplier must complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Inspection and acceptance occur at the destination, with zero variance allowed in quantity. The unit of issue is each (EA), and the procurement is subject to DoD authorized units of measure.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336413
New
DIBBS
STRIP WING
Solicitation # SPE4A6-26-Q-1212
The contract pertains to the procurement of one unit of a Strip Wing identified by NSN 1560-01-608-2561, with a delivery requirement of 111 days after contract award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment specifies a later revision. The item is subject to Covered Defense Information requirements and must comply with DLA packaging standards. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and inspection and acceptance must occur at the point of origin. Government identification must be removed from non-accepted supplies, and physical identification or bare item marking is required. Item Unique Identification is not mandated per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) governing this exception. Technical data associated with the item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons anywhere in the world, and DFARS 252.225-7048 is fully applicable. Access to this controlled data is restricted to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory DLA training and questionnaire, and have received explicit approval from the DLA controlling authority. The solicitation number is SPE4A6-26-Q-1212, issued on August 2, 2026, with responses due by August 10, 2026, and the contracting office is the ASC Commodities Division under the Department of Defense, with Bryan Distin listed as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-605H
This contract pertains to the procurement of six structural fitting components identified by NSN 0001S00000052 under solicitation SPE4A7-26-T-605H, with a delivery deadline of 588 days after contract award. The requirement is set aside exclusively for small businesses as defined under FAR 19.5, with the NAICS code 336413 indicating the classification under Aerospace Product and Parts Manufacturing. Technical and quality standards referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with specific identifiers R and I directing compliance to documented criteria. The deliverables must adhere to DLA packaging standards and include mandatory documentation for source approval requests. The item is subject to stringent export controls under ITAR or EAR, restricting technical data sharing without explicit authorization, and access is limited to contractors with approved JCP certification, completed DOD export training, and DLA authorization. Compliance with configuration change management is required through engineered change proposals for any deviations or waivers. Inspection and acceptance must occur at the origin, and non-accepted supplies must have all government identification removed. The item includes components governed by Qualified Products Lists or Qualified Manufacturers Lists, necessitating qualification per procurement note H02. Physical marking of the bare item is mandated, though Unique Item Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). Cybersecurity compliance requires CMMC Level 2 certification by an approved third-party assessment organization. Data related to this procurement is classified as Covered Defense Information under RD002, and the point of contact for inquiries is April Reed at the Department of Defense, with performance located in New Cumberland, Pennsylvania. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FILTER, FLUID
Solicitation # SPE4A7-26-T-605E
This contract is for the procurement of two hydraulic fluid filter assemblies with NSN 1650-00-831-8146 under solicitation SPE4A7-26-T-605E, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The requirement is a Total Small Business Set-Aside under NAICS code 336413, with a response deadline of August 10, 2026, and a delivery date 207 days after contract award. Technical data associated with the item is subject to export control under ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons, regardless of location, and applies to all parties including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and cleared access through DLA may receive the technical data. The place of performance is Robins Air Force Base, Georgia, and the primary point of contact is April Reed, reachable via email and phone provided.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
INSULATION, SUPPORT
Solicitation # SPE4A7-26-T-606D
The contract specifies the procurement of a commercial off-the-shelf (COTS) insulation and support item identified by part number 02250158-385 and NSN 1680-01-649-5646, with a quantity of one unit to be delivered within five days under the solicitation SPE4A7-26-T-606D. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item must be packaged in accordance with ASTM D3951 while strictly adhering to all applicable DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling, and RP001 for packaging standards. Sampling requirements mandate compliance with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. The item must be palletized per DLA requirements, labeled with the assigned unit of issue, and shipped via the fastest traceable means, explicitly prohibiting parcel post. The delivery address is Marine Aviation Logistics Squadron 14 at MCAS Cherry Point, North Carolina, with the original required delivery date set for March 4, 2026. All technical and quality provisions referenced in the DLA Master List take precedence over other standards, and the contract includes detailed shipping, identification, and government-only fields for logistics and tracking purposes.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
VALVE INLET SEAT
Solicitation # SPE4A5-26-T-318V
The contract pertains to the procurement of 13 valve inlet seats with NSN 1650-00-471-7681 and part number AC08822 supplied by Meggitt Aerospace Limited, under solicitation SPE4A5-26-T-318V. Delivery is required within 347 days of award, with FOB origin terms and inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with all applicable DLA Master List of Technical and Quality Requirements, which override any conflicting specifications such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with configuration control enforced through engineering change proposal and variance procedures. Sampling inspections must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and physical marking of the item is mandatory. The unit of issue is each (EA), with no variance permitted in quantity, and delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania by July 24, 2027. All documentation and compliance obligations referenced in the DLA master list are binding and take precedence.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
YOKE, UNIVERSAL JOIN
Solicitation # SPE4A6-26-T-11FZ
The contract pertains to the procurement of four YOKE, UNIVERSAL JOIN units with NSN 1680-01-692-3584 under solicitation SPE4A6-26-T-11FZ, with a response deadline of August 10, 2026, and a delivery requirement of 848 days after delivery order issuance. Technical data for this item is not publicly available due to proprietary or insufficient documentation, limiting competitive procurement. The contract incorporates technical and quality requirements from the DLA Master List, with compliance tied to the revision in effect on the solicitation issue date. Source approval documentation is required, and the item is subject to Covered Defense Information and Cybersecurity Maturity Model Certification Level 2, necessitating certification by a C3PAO. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Government identification must be removed from non-accepted supplies, and bare item marking is required, though Item Unique Identification is waived per customer request. Technical data associated with this item is subject to ITAR or EAR export controls, and only contractors with approved JCP certification, completed DLA training, and explicit authorization may access it. The place of performance is Cherry Point, North Carolina, and inquiries should be directed to Zachary Gonzalez at the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CONTROL STICK, AIRCR
Solicitation # SPE4A5-26-T-317Z
The contract is for a single Control Stick, Aircraft, identified by NSN 1680-00-054-3600 and part number 209-001-334-007, supplied by Bell Textron Inc. The item is classified as a critical application item and must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required. Packaging must be palletized according to DLA directives and use E5 unit containers with preservative method 10 and non-corrosive dry packaging. Delivery is due within 20 days FOB origin to a military recipient in Kaohsiung, Taiwan, with zero variance allowed in quantity. Inspection and acceptance occur at origin, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified. Attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. The supplier must comply with DLA’s Master List of Technical and Quality Requirements, and configuration changes require an Engineering Change Proposal or variance request. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and government identification must be removed from non-accepted supplies. Documentation for source approval is mandatory, and the contract is subject to Covered Defense Information provisions. The solicitation number is SPE4A5-26-T-317Z with a response deadline of August 10, 2026, and the required delivery date is August 4, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
TAIL ROD
Solicitation # SPE7M2-26-T-5944
The contract pertains to the procurement of a TAIL ROD with NSN 1720-00-939-0093, quantity of 13 units, under solicitation SPE7M2-26-T-5944, with a response deadline of August 13, 2026, and delivery expected in 305 days after order award. The item is associated with technical data subject to strict export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons, including foreign national employees and subsidiaries of U.S. companies, without prior authorization from the Department of State or Department of Commerce. Access to this controlled data is restricted exclusively to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA. The place of performance is specified as New Cumberland, Pennsylvania, 17070-5002, and the contracting office operates under the Department of Defense’s Nuclear Reactor Program. Primary point of contact is Alisha Blanton, reachable via email and phone provided.
NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-605Y
This contract pertains to a government procurement under solicitation SPE4A7-26-T-605Y for 29 units of an item identified by NSN 0001S00000052, with a delivery deadline of 264 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. The item is subject to export control regulations under either ITAR or EAR, restricting the disclosure of associated technical data to foreign persons wherever located, including foreign national employees and subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and access to controlled data is limited to contractors with approved JCP certification, completed DOD export control training, and formal DLA authorization. Packaging must adhere to DLA standards, and configuration changes require an engineering change proposal or variance request. Inspection and acceptance occur at origin, and non-accepted supplies must have government identification removed. The place of performance is Jacksonville, FL, with Hannah Leonard as the primary point of contact, and the solicitation is open to federal entities under NAICS code 336413.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE4A7-26-T-606A
This contract specifies the procurement of five terminal lugs with NSN 5940-01-008-6727 under solicitation SPE4A7-26-T-606A, which is a total small business set-aside with a NAICS code of 335931. Delivery is required within 20 days after award, and responses must be submitted by August 10, 2026. The item is subject to comprehensive technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. All items require physical identification or bare part marking in accordance with specified guidelines. Sampling and inspection follow MIL-STD-1916 or an approved zero-based equivalent, with verification levels and AQLs assigned based on attribute criticality unless otherwise stated. Zero non-conformances are required for acceptance unless the contract specifies otherwise. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location. Access is limited to contractors with approved JCP certification, completed DOD training, and formal DLA authorization. DFARS 252.225-7048 applies, and covered defense information is protected under RD003. The contracting office is the Department of Defense, specifically ASC Supplier Operations AE and AF Division, with Jessica Gentry as the primary point of contact.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-605C
The contract specifies the procurement of a spacer sleeve identified by NSN 5365-01-721-8998 and part number 92510A236, with a quantity of 14 units to be delivered within 10 days FOB origin. All items must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and the product is source-controlled, meaning it must be manufactured and tested using limited rights data accessible only to approved vendors with traceability to authorized sources. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans with strict acceptance criteria: critical, major, and minor attributes require verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with zero non-conformances mandated unless otherwise stated. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special markings required. The item must be palletized according to DLA packaging guidelines and shipped to the delivery address at US Army SSA Powidz AB in Poland. The contract prohibits government provision of proprietary technical data and requires vendors to demonstrate access to approved manufacturing sources. Delivery is subject to zero variance, inspection and acceptance occur at the destination, and transportation rules follow DLA procedural notes. The solicitation expires August 10, 2026, with an original required delivery date of July 31, 2026.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
PLATE, IMAGING, RADIATIO
Solicitation # SPE4A7-26-T-606M
The contract pertains to the procurement of 10 units of a radiation imaging plate, identified by NSN 6635-01-606-4999, under solicitation SPE4A7-26-T-606M, with a required delivery date of October 18, 2026, and a final delivery window of 170 days. All supplies must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue or award date. Hazardous material restrictions are strictly enforced: mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional components such as batteries, fluorescent lamps, sensors, or specified reagents, and any permitted mercury-containing portable lamps or instruments must be shockproof with a secondary containment boundary as defined by NAVSEA 5100-003D. Packaging must follow MIL-STD-2073-1E and DLA Packaging Requirements, with marking adhering to MIL-STD-129 and no special marking required. Sampling and inspection protocols mandate zero non-conformances under MIL-STD-1916 or comparable zero-based plans, with attribute verification levels assigned as VII, IV, and II for critical, major, and minor characteristics respectively. The item is to be delivered FOB origin to a designated DLA receiving point in Tracy, California, with no quantity variance permitted. The contract enforces full compliance with DLA transportation procedures and requires adherence to standardized unit of issue and packaging codes, with all documentation and marking aligned to federal military and procurement standards.
Other Measuring and Controlling Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
BLOCK, CABLE INSERT
Solicitation # SPE4A7-26-T-605X
The contract specifies the procurement of a BLOCK, CABLE INSERT with NSN 5975-01-386-6568 and part number RM120 from ROXTEC INC, with a quantity of 7 units priced at $7.00 each, totaling $49.00. Delivery is required within 229 days of contract award, with FOB origin terms, and inspection and acceptance to occur at the destination. The items must be packaged and labeled in strict accordance with MIL-STD-129, and packaging must comply with either ASTM D3951 for non-hazardous materials or FED-STD-313 and TQ requirement IP025 if hazardous, with all DLA Master List technical and quality requirements taking precedence. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Palletization must meet RP001 packaging standards, and the unit of issue is PR. All markings and identification must adhere to government specifications including physical identification of bare items and removal of government identifiers from non-accepted supplies. The delivery must be shipped to the designated receiving warehouse in Tracy, California, with a required ship date of March 28, 2027, matching the original delivery date. Transportation guidance is governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE4A7-26-T-605X, issued by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 10, 2026. The NAICS code is 335999, indicating other electrical equipment and component manufacturing. The point of contact is Renee Bynum, and all contractual obligations, including packaging, labeling, inspection, and delivery, are binding and must conform to DLA mandates without deviation unless explicitly permitted in writing. Quantity variance is strictly zero percent, and no substitutions or deviations are allowed without approval.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL BOARD
Solicitation # SPE4A7-26-T-605N
The contract specifies the procurement of a Terminal Board identified by NSN 5940-01-128-2240 and part number ST5M1379-006A, with an approved quantity of 148 units at a unit price of $148.00, resulting in a total contract value of $21,904. The item is classified as a critical application component, with approved suppliers including The Boeing Company, Trico Manufacturing Inc., RMB Miniature Bearings Inc., and Stroco Manufacturing Inc. Deliveries are required FOB origin, with inspection and acceptance occurring at the destination, and all units must be delivered within 154 days of contract award, with the original required delivery date set for January 12, 2027. The contract enforces strict adherence to the DLA Master List of Technical and Quality Requirements, including packaging standards per MIL-STD-129 and ASTM D3951, with DLA requirements taking precedence. Sampling must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and zero non-conformances required unless otherwise stated. All packaging and palletization must comply with DLA’s RP001 requirements, and items must be marked in compliance with RQ017 for physical identification. The sole delivery address is DLA Distribution Cherry Point in North Carolina, and transportation procedures must follow DLAD Proc Notes C19 and C20. The contract includes mandatory documentation for source approval, removal of government identifiers from non-accepted items, and all requirements are governed by the DLA Master List revision in effect on the solicitation date.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333998
New
DIBBS
GENERATOR, OXYGEN-NI
Solicitation # SPE4A7-26-T-605B
The contract pertains to the procurement of one Oxygen-NI Generator, identified by NSN 3655-01-680-9902 and part number HPCF-K02-0110-GG, manufactured by South-Tek Systems, LLC, with technical and quality requirements aligned to the DLA Master List and referenced engineering drawing NR 5B5M3 11B4550216 Revision A dated January 28, 2022. The item must adhere to stringent specification controls, including configuration change management through Engineering Change Proposals, and is subject to Covered Defense Information protocols. Quality assurance protocols mandate sampling in accordance with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stipulated, with attributes classified as critical, major, or minor assigned corresponding verification levels or AQLs. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code 03-03 Method 50, while palletization follows DLA-specific requirements. The generator is to be delivered FOB origin within 20 days, with no variance permitted in quantity, and inspection and acceptance occur at the destination location. Delivery is directed to the 1st Armored Division Sustainment Brigade at Fort Bliss, Texas, with shipment required via traceable means—parcel post is prohibited. The contract is issued under solicitation SPE4A7-26-T-605B, a Total Small Business Set-Aside under NAICS code 333998, with a response deadline of August 10, 2026, and a required delivery date of July 27, 2026. The purchase request number is 7017659301, and the unit of issue is each. The item is designated for government use with assigned codes including IPD 12, DIC A0A, and tracking identifiers such as TCN W8001Z62030574 and RDD 218. Supplier compliance with all technical and quality requirements referenced in the DLA Master List is contractually binding, and any deviations require formal variance requests.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333618
New
DIBBS
TRANSMITTER, PRESSUR
Solicitation # SPE4A7-26-T-605M
The contract pertains to the procurement of a pressure transmitter, identified by NSN 6620-00-974-6488 and part numbers 209-060-602-11 from Bell Textron Inc. and 381065-007 from Simmonds Precision Products Inc., with a required quantity of four units. Delivery must be completed within 20 days of contract award, shipped FOB origin, and subject to zero variance in quantity. Inspection and acceptance both occur at the origin, with packaging strictly following MIL-STD-2073-1E and marking in accordance with MIL-STD-129, including the special code for delicate instrument handling. Packaging and palletization must comply with DLA’s standardized requirements, and the item is classified as a critical application item. The contract incorporates technical and quality standards referenced from the DLA Master List, and sampling procedures must align with MIL-STD-1916 or a zero-defect comparable plan unless otherwise stated. A Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is required, reflecting heightened cybersecurity obligations. All government identification must be removed from non-accepted supplies, and physical identification of bare items is mandated. The delivery destination is the Taiwan Army’s Zuoying Ammunition Sub-Depot in Kaohsiung, with no alternative freight forwarders permitted without adherence to specific DLA procedural notes. The solicitation was issued under SPE4A7-26-T-605M with a response deadline of August 10, 2026, and the required delivery date is August 4, 2026.
Other Engine Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
STUD ASSEMBLY, TURNL
Solicitation # SPE4A7-26-T-605K
The contract is for the procurement of 20 units of a STUD ASSEMBLY, TURNLOCK FASTENER with part number ET223AA3-12C and NSN 5325-01-473-2537, sourced from AVIBANK MFG. INC. located in North Hollywood, CA. All items must comply with MIL-STD-130N dated 16 Nov 2012 for identification marking of U.S. military property and adhere to DLA packaging requirements as outlined in RP001. Technical and quality standards referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The contract mandates the removal of government identification from non-accepted supplies as per RQ011. Delivery is required within 238 days after contract award, with the place of performance designated as Tracy, CA, 95304-5000. The solicitation number is SPE4A7-26-T-605K, issued on August 2, 2026, with responses due by August 10, 2026, under NAICS code 332722, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with primary point of contact Naron Sanderlin reachable at naron.sanderlin@dla.mil or 4457374458.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
CONTROL, INFRARED SE
Solicitation # SPE4A7-26-T-606E
The contract pertains to the procurement of two units of Control, Infrared SE with NSN 5850-01-595-9396 under solicitation SPE4A7-26-T-606E, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within five days of contract award, shipped FOB origin, with no variance allowed in quantity and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129, with palletization adhering to DLA’s packaging standards. The item must be shipped using the fastest traceable means and is explicitly excluded from parcel post delivery; the freight shipping address is in San Diego, California, with a designated hazmat receiving location. The required delivery date is July 27, 2026, and the solicitation response deadline was August 10, 2026, with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Special marking is not required, and the unit of issue is each, priced at $2.00 per unit for a total of $4.00. Government-specific identifiers such as IPD, DIC, and ADV codes are included for internal use.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details