Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ARMOR, SUPPLEMENTAL, SMA

Active
SPE7L4-26-T-6209Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one unit of supplemental armor for small arms fragmentation, identified by NSN 2540-01-606-3668 and part number 40810008, under solicitation SPE7L4-26-T-6209. Delivery is required within ten days FOB origin, with no tolerance for quantity variance, and must be inspected and accepted at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over commercial standards such as ASTM D3951. Packaging must conform to MIL-STD-129 labeling and DLA-specific packaging guidelines, with hazardous material handled per TQ requirement IP025 and non-hazardous material commercially packaged as applicable. Palletization must adhere to RP001 requirements. The item is designated as a critical application item and requires cybersecurity compliance through a CMMC Level 2 self-assessment. The delivery location is designated as W90HDC, Fort Bliss, Texas, with shipping instructions mandating the fastest traceable method and explicitly prohibiting parcel post. Marking must include the military freight designator W90HDC62120668 and reference RDD 555 and Project TP 2. The contract specifies a required delivery date of August 5, 2026, with the solicitation issued on August 9, 2026, and responses due by August 20, 2026. The primary point of contact is Anna-Rachelle Betts, and the procurement falls under NAICS code 336992 for other arms, ordnance, and accessories manufacturing. All government-specific identifiers and codes, including DIC A0A and ADV FC Z9, are for official use only and must be observed in documentation and labeling.

General Info

Procure one NSN 2540-01-606-3668 armor unit, deliver FOB origin by Aug 5, 2026, CMMC Level 2, MIL-STD-129, to Fort Bliss, Texas.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

336992 - Military Armored Vehicle, Tank, and Tank Component ManufacturingView NAICS

Place of Performance

BLDG 23015 REDBALL EXPRESS, FORT BLISS, TX, 79918-0000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L4-26-T-6209 for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS
Contacts
ANNA-RACHELLE BETTS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ARMOR,SUPPLEMENTAL,SMALL ARMS-FRAGMENTAT
ARMOR,SUPPLEMENTAL,SMALL ARMS-FRAGMENTAT
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
CRITICAL APPLICATION ITEM
AMENTUM SERVICES, INC. 5W3V7 P/N 40810008
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017784254 0001 EA 1.000
NSN/MATERIAL:2540016063668
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7L4-26-T-6209
SECTION B
PR: 7017784254 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W90HDC
0047 CS BN CO A DISTRIBUTI
US ARMY 2 1AD AWCF SSF
BLDG 23015 REDBALL EXPRESS
FORT BLISS TX 79918-0000
US
RDD 555 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W90HDC
0047 CS BN CO A DISTRIBUTI
US ARMY 2 1AD AWCF SSF
BLDG 23015 REDBALL EXPRESS
FORT BLISS TX 79918-0000
US
MARKFOR
W90HDC
0047 CS BN CO A DISTRIBUTI
US ARMY 2 1AD AWCF SSF
BLDG 23015 REDBALL EXPRESS
FORT BLISS TX 79918-0000
US
M/F: (TCN) W90HDC62120668
RDD: 555
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/05/2026
SPE7L4-26-T-6209 NSN/Part Number: 2540-01-606-3668 Quantity: 1 EA Purchase Request: 7017784254QTY: 1 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336992
New
DIBBS
HOUSING, AUXILIARY P
Solicitation # SPE7L3-26-T-169W
The solicitation SPE7L3-26-T-169W seeks 29 units of a housing component for an auxiliary power unit, designated by NSN 2590-01-255-0866, with a delivery requirement of 165 days after order. The item is manufactured through a metal casting process requiring specialized tooling, and suppliers must comply with strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. All deliveries must include a Certificate of Quality Compliance (COQC) for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and submitted electronically via the iRAPT system with supporting documentation uploaded to the Receiving Report. Government inspection at source applies, and contractors must make the COQC available for review prior to acceptance. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessment organizations, and the contract includes provisions for configuration change management, qualified products or manufacturers lists, and adherence to DLA packaging standards. Removal of government identification from non-accepted items is required, and all supplies must meet specifications tied to defined QPLs or QMLs. The procurement is managed under the Land Supplier Operations Vehicle Support organization, with performance occurring in Texarkana, Texas, and primary point of contact being Matthew Curry. The solicitation closed on August 20, 2026, and the North American Industry Classification System code is 336992 for other transportation equipment manufacturing.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336992
New
DIBBS
A-FRAME, VEHICLE MOUNTI
Solicitation # SPE7L1-26-T-943M
This contract is for one A-Frame vehicle mounting unit under solicitation SPE7L1-26-T-943M, with a total small business set-aside and a NAICS code of 336992 for other transportation equipment manufacturing. The item has a NSN of 2590-01-351-7773 and requires delivery within 20 days after order date to Fort Lee, Virginia. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The contractor must comply with tailored higher-level quality requirements, inspection and acceptance at origin, removal of government identification from rejected supplies, and component qualifications as defined by Qualified Products or Manufacturers Lists. Packaging must meet DLA-specific standards, and all measuring and test equipment used must be properly calibrated and documented. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons without prior authorization, and access is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA approval. The contract is open only to small businesses, with responses due by August 20, 2026, and point of contact for inquiries is Kristina Derry at the Defense Logistics Agency.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336992
New
Federal
15--ARMOR,SUPPLEMENTAL,
Solicitation # N0038326QBA53
The contract solicitation NSN 1R-1560-016723515-V2 requests seventeen units of supplemental armor with technical documentation version 001, under FOB origin delivery terms. Issued by the Naval Supply Systems Command Weapon Systems Support, the posting date is August 7, 2026, with proposals due by September 21, 2026, at 4:00 a.m. Eastern Time. This is a presolicitation notice and does not specify a set-aside type or NAICS code, indicating the opportunity is open to all qualified vendors without restriction. The performance location is unreleased, but the solicitation originates from the office in Philadelphia, Pennsylvania, with Grace Y. McGinley serving as the primary point of contact for inquiries through the provided email and phone number. The procurement is managed under the Department of Defense and the official solicitation can be accessed via the SAM.gov portal linked in the data.
Navsup Weapon Systems Support

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 336992
New
Federal
Sources Sought, Kit, ETWD Tube Temperature Display, NSN: 1025-01-606-1032
Solicitation # W912CH-26-R-A054
The Army Contracting Command – Detroit Arsenal is conducting market research through a Sources Sought Notice to evaluate industry capabilities for the production of the Kit, ETWD Tube Temperature Display, identified by NSN 1025-01-606-1032 and part number 11582731, which is used on the 155MM Howitzer M777A2. Estimated annual quantities are 478 units in Year 1 and 111 units each in Years 2 and 3, with no planned requirements in subsequent years. This notice is solely for planning purposes and does not constitute a solicitation or guarantee of future contract award. To access the associated Technical Data Package (TDP), which has a distribution code D limiting access to DoD and U.S. DoD contractors, vendors must have an active DD 2345 Military Critical Technical Data Agreement on file with the Defense Logistics Information Service and must request access via SAM.gov, with further verification through the Joint Certification Program. Vendors are required to destroy all copies of the TDP upon completion of the Government’s intended use through approved methods including shredding, burning, pulping, melting, or complete electronic deletion. First Article Testing will be required for any future award. Respondents must complete a vendor profile including company name, mailing address, CAGE code, point of contact, and website, and must declare their business size and socioeconomic status under NAICS code 336992, including whether they qualify as a small business, 8(a), HUBZone, Woman-Owned, Service-Disabled Veteran-Owned, or Large Business. Small businesses must also indicate compliance with the Nonmanufacturer Rule, demonstrating either direct manufacture, supply from another small business manufacturer, or an approved SBA waiver. Responses must be submitted via email to Kaitlyn Fruhner no later than August 17, 2026, with the subject line “Sources Sought, W912CH-26-R-A054,” and may include product manuals or sales media. All proprietary or confidential information must be clearly marked with “PROPRIETARY INFORMATION CONTAINED WITHIN” on the cover and “CONFIDENTIAL” on sensitive content, with electronic submissions requiring legends on both the email cover and at the start of the file; partial confidentiality must be denoted with “CONFIDENTIAL DATA BEGINS” and “CONFIDENTIAL PORTION ENDS.” The
W6QK Acc- Dta

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
Federal
Nonmanufacturer Rule-Compliant Supplier
W6QK Acc- Dta

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
Federal
Final Assembly and Integration of Military Vehicle Component
W6QK Acc- Dta

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
Federal
25--PARTS KIT,DOOR LIFT
Solicitation # SPE7L326T164S
The contract seeks procurement of a Parts Kit, Door Lift with NSN 2590012121057 under solicitation number SPE7L326T164S, issued by the DLA Land and Maritime under the Department of Defense. A total of 793 units are requested across four line items: 22, 70, and 700 units in kit form (UI KT) to be delivered to DLA Distribution Albany within 157 days, and one unit in individual assembly form (UI EA) requiring delivery within 30 days. All quotes must be submitted electronically, and the solicitation is open to all responsible sources with no restrictions beyond the specified set-aside. This is a Small Business Set Aside designated as total, meaning only small businesses may respond, and it falls under the NAICS code 336992 for other transportation equipment manufacturing. The response deadline is August 17, 2026, and all inquiries must be directed via email to the designated point of contact. The contract office is located in Columbus, Ohio, and performance is to be fulfilled at DLA Distribution Albany regardless of the vendor’s location.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
Federal
30--GEAR,SPUR
Solicitation # SPE7L426T6034
The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for 48 units of the gear spur with NSN 3020011547664, to be delivered to DLA Distribution Albany within 168 days of award. This procurement is conducted via a request for quotation with no hard copies available; all submissions must be made electronically. Approved sources for this item are limited to 56161 with part number 10501236 and S3002 with part number 24028213.02. The solicitation, identified by number SPE7L426T6034, was posted on August 6, 2026, with responses due by August 17, 2026. No specifications, plans, or drawings are provided, and all responsible sources are invited to submit quotes provided they meet the submission deadline. The procurement falls under NAICS code 336992 and is not subject to any set-aside designation. Questions should be directed via email to the designated point of contact, with additional information accessible through the SAM.gov portal using the solicitation number.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
Federal
Request for Information for Production of Stryker Double-V Hull (DVH) A1 Engineering Change Proposal (ECP) Vehicles
Solicitation # W56HZV20D0005
The U.S. Army’s Project Management Office for the Stryker Brigade Combat Team is seeking industry input on the capability to produce Stryker vehicles configured with the Double-V Hull A1 Engineering Change Proposal, as no complete systems-level Technical Data Package is currently available. The request aims to evaluate potential contractors’ ability to manufacture new DVH hulls and integrate all required components without relying on existing technical documentation, focusing on production readiness, welding expertise with armor materials such as rolled homogeneous armor and high hard armor, and the certification of welders for armor steel. Companies must detail their experience in armored vehicle production, outline their achievable monthly production rates, and explain how they would meet performance specifications without a full TDP, addressing each question comprehensively. Responses are due by 1300 Eastern Daylight Time on 11 August 2026 and must be submitted electronically in Word, Excel, PowerPoint, or Adobe Acrobat formats, with each email not exceeding 3.5 megabytes and including specific labeling requirements. Submissions must include the company’s CAGE code, full contact details, facility locations, business size, and SAM status. All information provided is voluntary, non-binding, and not eligible for reimbursement; no contract award is guaranteed nor implied by this request. Proprietary data must be clearly marked with authorized legends to ensure confidentiality, and unmarked information will not be protected. Respondents are advised that this is not a solicitation and any future opportunities will be posted publicly on SAM.gov.
W6QK Acc- Dta

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 336992
New
Federal
25--PLATE,BODY STRUCTUR
Solicitation # SPE7L326T153V
The contract seeks the procurement of 41 units of NSN 2590012156634 PLATE,BODY STRUCTUR, with 40 units required for delivery to W1A8 DLA DISTRIBUTION within 276 days after award and one additional unit due within 60 days after award. The solicitation is open to all responsible sources, but quotes must be submitted electronically and received by the deadline to be considered. This is a Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside under FAR 19.14, exclusively available to qualifying small businesses owned and controlled by service-disabled veterans. The North American Industry Classification System code is 336992, indicating the product falls under Other Transportation Equipment Manufacturing. The solicitation is managed by the Department of Defense through DLA Land and Maritime, with the office located in Columbus, Ohio. All questions must be directed via email to the designated point of contact, as specified in the solicitation document accessible through the provided links. The response deadline is August 17, 2026, and the solicitation was posted on August 6, 2026.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
Federal
53--DOOR,ACCESS,WEAPON SYS
Solicitation # SPE7L426T6066
The contract involves the procurement of one unit of NSN 5342013868153, a door for access to a weapon system, to be delivered to W1A8 DLA DISTRIBUTION within 168 days after order placement. Only two approved sources are authorized for this requirement: 076M6 and 0FW39, both sharing the same part number 12416374. The solicitation is issued as a Request for Quotation under number SPE7L426T6066 and is exclusively available electronically via the provided SAM.gov link; no hard copies are distributed. Technical specifications, plans, or drawings are not provided, and all responsible sources are invited to submit electronic quotes prior to the deadline of August 17, 2026. The procurement falls under NAICS code 336992 and is managed by the DLA Land and Maritime office in Columbus, Ohio, with all inquiries directed to the buyer email listed in the solicitation document via the DIBBS portal.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336992
New
Federal
53--PACKING WITH RETAIN
Solicitation # SPE7M426T309C
The contract pertains to the procurement of 340 units of packing with retain, identified by NSN 5330010978065, to be delivered to DLA Distribution San Diego within 184 days of award. The solicitation, numbered SPE7M4Q26T309C, is a combined requirement issued under the SBA Certified Women-Owned Small Business Program Set-Aside, restricted exclusively to certified WOSB concerns. The NAICS code 336992 classifies this acquisition under other transportation equipment manufacturing. All responses must be submitted electronically via the provided SAM.gov link; hard copies are not accepted, and digital access to drawings and military specifications is available through official channels. The solicitation was posted on August 6, 2026, with a response deadline of August 17, 2026. Point of contact for inquiries is listed as DibbsBSM@dla.mil, with further details available through the DIBBS website using the solicitation number. The contracting office is based in Columbus, Ohio, under the Department of Defense’s DLA Land and Maritime organization.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 336360
New
DIBBS
CUSHION, SEAT BACK, V
Solicitation # SPE7L4-26-T-6215
The item is a cushion for a seat back, designated with NSN 2540-01-659-1000, and is being procured in a quantity of one unit under purchase request 7017784238. The solicitation number is SPE7L4-26-T-6215, posted on August 9, 2026, with responses due by August 20, 2026. The contract falls under NAICS code 336360 and is managed by the Department of Defense through the LSO Combat Vehicles and Armament office. Delivery is required within 10 days after delivery order issuance. The technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure of technical information to foreign persons, including foreign nationals within the United States or overseas, requires prior authorization from the Department of State or Department of Commerce. Distribution is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandated training on handling DOD export-controlled data, and have been formally approved by DLA. DFARS 252.225-7048 governs the management of this controlled information, and the primary point of contact for inquiries is Anna-Rachelle Betts, reachable via email or phone listed in the contract metadata.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
BOX, ACCESSORIES STO
Solicitation # SPE7L4-26-T-6216
The contract pertains to the procurement of two units of a box and accessories item identified by NSN 2540-01-734-9195 under solicitation SPE7L4-26-T-6216, with a required delivery date of August 6, 2026, and a 20-day delivery window from the order date. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, including ASTM D3951, and must be packaged in accordance with MIL-STD-129 labeling and RP001 packaging guidelines, with hazardous materials meeting TQ requirement IP025 and non-hazardous materials following FED-STD-313. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Packaging must be commercially compliant, palletized per DLA standards, and clearly marked with the correct Unit of Issue and Quantity per Unit Pack. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The shipment must be sent by the fastest traceable means—parcel post is prohibited—and must be addressed to the designated military facility in Imperial Beach, California, with the RDD 777 identifier. The contractor is Buyers Products Company DBA 9X737 with part number 1705160, and the contract is issued under a DoD unit of issue as defined by the official DLA unit conversion table. All documentation and reporting must include the designated government control codes and project identifiers for administrative tracking.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
LATCH, DOOR, VEHICULAR
Solicitation # SPE7L4-26-U-1073
The contract specifies the procurement of a vehicular door latch with NSN 2540-01-609-9677 and part number MIL-2-16924-23, under solicitation SPE7L4-26-U-1073, targeting a total small business set-aside with a NAICS code of 336390. The requirement is for 29 units at a unit price of $29.00, with a total estimated value of $841.00, and delivery must be completed within 80 days, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with DLA’s Master List of Technical and Quality Requirements, specifically referencing IP025, MIL-STD-129 for marking and labeling, and either Fed-Std-313 for hazardous materials or ASTM D3951 for non-hazardous items, with DLA standards overriding ASTM where conflicts exist. Palletization and packaging must adhere to RP001 DLA Packaging Requirements for Procurement. The contract is issued by the Department of Defense’s LSO Combat Vehicles and Armament office under a federal solicitation posted on August 9, 2026, with responses due by August 24, 2026. The point of contact is Heather Kessler, and the unit of issue is each (EA), with the quantity per unit pack defined as one. All technical and quality specifications referenced by R or I numbers are incorporated from the DLA Master List, and the applicable revision is determined by the solicitation issue date. Delivery is to be made without government identification removed from non-accepted supplies, and the unit of issue and purchase unit are to be aligned with the official DLA unit of issue documentation. The contract is managed through DLA’s eProcurement systems and the DIBBS platform for solicitation participation.
Other Motor Vehicle Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336211
New
DIBBS
PLATE, SKIRTING, VEHICLE
Solicitation # SPE7L4-26-U-1068
The contract solicitation SPE7L4-26-U-1068 is for the procurement of 30 units of Vehicle Suspension Skirting Plates, identified by NSN 2510014214593, under an indefinite-delivery contract with a maximum value of $350,000. Delivery is required FOB origin within 89 days of order placement, with inspection and acceptance occurring at the destination. The product must be manufactured to exact technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, and all units must be painted green unless otherwise specified. Packaging and marking must strictly conform to MIL-STD-2073-1E and MIL-STD-129, with special handling instructions including an ARROW UP marking, OPEN THIS SIDE designation, and requirement for mechanical handling. The packaging must also comply with DLA’s RP001 packaging standards and include the specified preservation method, wrap material, cushioning, and unit container codes. Acceptance sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance unless otherwise stated, and unspecified attributes are treated as major with an AQL of 1.0. Contractor compliance with CMMC Level 2 cybersecurity self-assessment is mandatory, and the contract includes clauses for safeguarding covered defense information per NIST SP 800-171. The use of hexavalent chromium is prohibited, and contractors must submit Safety Data Sheets for any hazardous materials. All supplies must comply with DoD regulations prohibiting acquisition from Communist Chinese Military Companies and restricted telecommunications equipment. The contract incorporates standard FAR and DFARS clauses including equal opportunity, combating trafficking, employment eligibility verification, sustainable products, whistleblower rights, and limits on subcontracting for commercial items. The purchasing agency is the Department of Defense’s LSO Combat Vehicles and Armament, operating under a simplified acquisition process using electronic submission via DIBBS, and invoices must be processed through WAWF. No unit pricing is listed in the base solicitation, and the government retains the right to issue delivery orders for quantities up to the contract ceiling, beginning with a guaranteed minimum of four units.
Motor Vehicle Body Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
RING, WIPER
Solicitation # SPE7L4-26-U-1078
The contract is for the procurement of 5,349 units of a RING, WIPER with NSN 5330-01-493-5202 under solicitation SPE7L4-26-U-1078, issued by the Department of Defense through the LSO Combat Vehicles and Armament office. Deliveries are required within 97 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item is classified as a critical application and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV deterioration, as stipulated for direct vendor delivery, foreign military sales, and stock shipments. All packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The product must be free of asbestos as defined by FED-STD-313 and palletization must meet DLA packaging standards. Sampling and inspection for conformance must follow MIL-STD-1916 or ASQ H1331 Table 1, or an approved zero-based sampling plan, with critical, major, and unspecified attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in the sample lot unless otherwise stated. The manufacturer may elect attribute or variable inspection under MIL-STD-1916, and MIL-STD-105 or ASQ Z1.4 may only be used to determine sample size, not acceptance criteria. Hazardous materials packaging and shipping must comply with IP025. The unit of issue is each, and the contract is issued under DLA Direct, CONUS coverage. The supplier for this item is Greene Tweed & Co Inc, part number 87582. The solicitation was posted on August 9, 2026, with responses due by August 24, 2026, and the contract is subject to standard DoD procurement procedures and unit of issue conversions.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, NUT AN
Solicitation # SPE7L4-26-T-6214
This contract specifies the procurement of 10 protective nut caps with NSN 5340-01-695-4518 and part number 4359775 for BAE Systems Land & Armaments L.P. under solicitation SPE7L4-26-T-6214, issued by the Department of Defense through DLA. The items must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R and I numbers, and packaging must adhere to MIL-STD-2073-1E and DLA packaging guidelines, including MIL-STD-129 marking with no special marking codes. Delivery is required FOB origin within 165 days, with a specified ship date of February 2, 2027, and no tolerance for quantity variance. Inspection and acceptance occur at the destination, with packaging requiring unit containers coded D3, intermediate containers coded E5, and palletization in accordance with DLA requirements. The delivery address is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany GA 31704-1128, and transportation logistics follow DLA procedure notes C19 and C20. The unit price is $10.00 per piece, totaling $100.00, with the purchase request number 7017776237 and unit of issue as each. The contract is managed by Anna-Rachelle Betts of LSO Combat Vehicles and Armament, with contact information provided for inquiries.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L4-26-U-1070
This solicitation, SPE7L4-26-U-1070, issued by the Defense Logistics Agency’s LSO Combat Vehicles and Armament office, seeks 33 units of CLAMP, LOOP with NSN 5340-01-284-2451 under an Indefinite Delivery Contract with a one-year performance period and delivery required within 116 days after award. The contract has a maximum potential value of $350,000 and is subject to FOB Destination terms, meaning the contractor bears all transportation costs and risks until delivery. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced with 'R' or 'I' numbers, which supersede commercial standards like ASTM D3951. Packaging must conform to RP001 and MIL-STD-129 for labeling, barcoding, and Unique Item Identification (UID), while MIL-STD-130N applies to property marking. Hazards and hazardous materials are controlled under FED-STD-313 and specific TQ requirements such as IP025. The item involves export-controlled technical data subject to ITAR or EAR, requiring contractors to hold a valid US/Canada Joint Certification Program certification, complete mandatory DLA training, and obtain DLA approval before accessing the data. The contract incorporates multiple FAR and DFARS clauses including 52.227-1 Alternate II for authorization and consent, 252.204-7012 for safeguarding defense information and cyber incident reporting, 252.204-7018 prohibiting acquisition of covered telecommunications equipment, and 252.223-7008 banning hexavalent chromium. Offerors must validate their Unique Entity ID and CAGE code, provide accurate socioeconomic representations including small business status, and disclose any covered telecommunications equipment or services under 252.204-7016. All proposals must be submitted electronically via the DLA Internet Bid Board System by August 24, 2026. Inspection and acceptance occur at the destination point by the Government under FAR 52.246-1, and invoicing must be processed through Wide Area WorkFlow with no Fast Pay authorization unless specifically incorporated. Payment office and accounting details will be provided in the final award, and contractors must comply with cybersecurity, whistleblower rights, trafficking in persons,
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336360
New
DIBBS
MIRROR HEAD, VEHICULAR
Solicitation # SPE7L4-26-U-1071
This contract is an indefinite-delivery contract under the Department of Defense, issued by LSO Combat Vehicles and Armament, for the procurement of vehicular mirror heads identified by NSN 2540017068157, with an estimated annual quantity of 96 units and a maximum contract value of $350,000. The solicitation number is SPE7L4-26-U-1071, issued on August 9, 2026, with responses due by August 24, 2026, through the DIBBS electronic portal. Delivery is required FOB origin within 80 days of order receipt, with inspection and acceptance performed at the destination point. All items must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including standardized barcoding and preservation standards, and palletization must meet DLA’s RP001 requirements. No special marking is required, and the use of Class I ozone-depleting chemicals is strictly prohibited. Packaging data specifies preservation method 31, clean and dry condition, and unit container D3. The contractor must adhere to the DLA Master List of Technical and Quality Requirements via R/I numbers and ensure hazard communication compliance under 29 CFR 1910.1200, with pre-award submission of hazard labels for non-exempt materials. Invoicing is mandated through WAWF, and the contract incorporates multiple FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment verification, sustainable products, hazardous materials, export controls, subcontracting, safety notifications, transportation by sea, arbitration restrictions, and NIST SP 800-171 cybersecurity assessments. Offerors must provide a current UEI and CAGE code, and represent their status under applicable socioeconomic categories, but no specific evaluation weights are disclosed, indicating that award will be based on price and other factors using a trade-off approach. The contract does not include small business set-asides or key personnel requirements, and all deliveries are subject to government-issued task orders within the contract’s indefinite quantity framework.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332912
New
DIBBS
CONTROL, REEL
Solicitation # SPE7L4-26-T-6212
The contract pertains to the procurement of CONTROL, REEL with NSN 8130-01-460-6614 and part number 12364610-15, for a quantity of 8 units at a unit price of $8.00, totaling $64.00. Delivery is required within 165 days from the contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and the items must be packaged in compliance with ASTM D3951, subject to precedence of the DLA Master List of Technical and Quality Requirements. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001: DLA Packaging Requirements for Procurement. The sole delivery address is the DLA Distribution facility at New Cumberland, PA, with transport governed by DLAD Proc Notes C19 and C20. The original required delivery date is April 25, 2027, with a need ship date of February 2, 2027. The solicitation number is SPE7L4-26-T-6212, issued by the Department of Defense under the NAICS code 332912, with Anna-Rachelles Betts as the primary point of contact. Proprietary data and insufficient competitive information are noted, and the contract references DLA’s authorized unit of issue and associated conversion standards.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
CAPASSEMBLY
Solicitation # SPE7L4-26-U-1075
This contract, issued under solicitation SPE7L4-26-U-1075, is a total small business set-aside for the procurement of one item identified by NSN 2910-01-485-7711 and part number 75290-01, with an estimated quantity of 149 units at a unit price of $149.00, totaling $22,201. The contract mandates strict adherence to DLA Packaging Requirements for Procurement, including compliance with ASTM D3951 for packaging and MIL-STD-129 for marking and labeling, with all DLA Master List of Technical and Quality Requirements taking precedence. Delivery is required FOB origin within 74 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The unit of issue is each, and palletization must conform to DLA standards. The item is covered under DLA Direct, CONUS, and is subject to all applicable federal acquisition regulations. The solicitation was posted on August 9, 2026, with responses due by August 24, 2026, and is managed by the Department of Defense’s LSO Combat Vehicles and Armament under NAICS code 336310, with primary point of contact Heather Kessler available for inquiries.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L4-26-U-1072
The contract pertains to the procurement of a BRACKET, ANGLE with NSN 5340-01-481-8190 and part number 23-09130-007, under solicitation SPE7L4-26-U-1072, issued by the Department of Defense’s LSO Combat Vehicles and Armament office. The requirement is for 129 units, each priced at $129.00, totaling $16,641.00, with delivery expected within 116 days FOB origin and no tolerance for quantity variance. The item is covered under DLA Direct, CONUS, with inspection and acceptance points set at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, and adhere strictly to MIL-STD-129 for marking and labeling. If the material is non-hazardous, it must be commercially packaged per ASTM D3951, but if hazardous per FED-STD-313, packaging must follow TQ requirement IP025. All packaging and palletization is governed by RP001, DLA Packaging Requirements for Procurement. The solicitation is a total small business set-aside under NAICS code 332510, with responses due by August 24, 2026, and was posted on August 9, 2026. Primary point of contact is Heather Kessler, reachable via email and phone as provided.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336330
New
DIBBS
PARTS KIT, BALL JOINT
Solicitation # SPE7L4-26-U-1080
The contract pertains to a Parts Kit, Ball Joint, identified by NSN 2530-01-668-5704 and part number 4364830, with a quantity of 12 kits delivered under solicitation SPE7L4-26-U-1080. Delivery is required within 75 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E Appendix D for kits and conform to DLA packaging requirements, with marking in accordance with MIL-STD-129. The unit of issue is KT (kit), and all preservation and packaging methods must adhere to the specified military standards using designated materials and codes. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The contract is issued by the Department of Defense under LSO Combat Vehicles and Armament, with Heather Kessler as the primary point of contact. This is a direct DLA acquisition within the continental United States, and the solicitation response deadline is August 24, 2026.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details