Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Authorized Caterpillar Parts Supply

Active

Federal

Response Deadline10/30/2026, 06:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the Navsup Fleet Logistics Center Yokosuka for the Department of Defense, involves the procurement and delivery of genuine Caterpillar OEM replacement parts, maintenance hardware, and spares. These supplies are intended for prime contractors supporting Navy Yard Tugs YT-805, YT-806, and YT-807 under COMFLEACT Yokosuka. The contractor is responsible for sourcing authentic parts and ensuring all items are marked and labeled in strict accordance with MIL-STD-130 and MIL-STD-129 standards. All materials must be delivered directly to the designated Navy facility located at Yokosuka Naval Base in Japan.

General Info

Procurement of genuine Caterpillar parts for Navy Yard Tugs at Yokosuka Naval Base.

Agency

Department Of Defense → Navsup Flt Logistics Ctr Yokosuka

NAICS

423830 - Industrial Machinery and Equipment Merchant Wholesalers

Place of Performance

Yokosuka Naval Base, JP-14, JPN

Set-Aside

NONE

Documents

This scope was carved out of N6264927QB003.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Caterpillar 3512C Diesel Engine Inspections, YT-807 Heat Exchanger Overhaul (This is a sole source requirement and posting this solicitation to SAM.gov is information purpose only)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 26

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 06:00:00 AM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Yokosuka

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Yokosuka

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies authorized Caterpillar replacement parts, maintenance hardware, and spares for prime contractors on Navy Yard Tugs YT-805, YT-806, and YT-807 for COMFLEACT Yokosuka. Sources and delivers genuine Caterpillar OEM parts. Requires marking per MIL-STD-130 and labeling per MIL-STD-129. Delivers OEM parts and hardware to the designated Navy facility.

Similar Contracts

Same NAICS industry code

Industrial Air Compressor Equipment SupplierThis subcontract opportunity is for an Industrial Air Compressor Equipment Supplier to provide manufacturer-authorized new air compressor units for prime contractors working on City of Austin Convention Center Department projects. The selected supplier must be an authorized dealer for the specified manufacturer and is responsible for delivering units that meet precise technical requirements, including specific horsepower, CFM, operating pressure, and voltage/phase configurations. In addition to the hardware, the supplier must provide all associated technical specifications and warranty documentation. This procurement is categorized under NAICS code 423830, with a response deadline set for December 1, 2026.

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Component Parts Supply for Chopper AssemblyThis subcontract involves the supply of replacement parts, fasteners, and raw materials for prime contractors working on NAVSUP Weapon Systems Support projects. The primary objective is the sourcing and delivery of OEM or approved equivalent components specifically for Part Number 1680-016216686, including individual replacement hardware and components for Chopper Assembly. The contract is issued under the Department of Defense with a response deadline of November 23, 2026. A critical requirement for the provider is strict compliance with the Buy American Act, which necessitates the provision of official certification regarding the country of origin for all supplied materials.

Navsup Weapon Systems Support

POSTED

about 5 hours ago

DEADLINE

JLG Lift Equipment SupplierThis subcontract agreement establishes the procurement of a JLG brand aerial work platform to support prime contractors operating at the Clark Energy Center. The selected supplier is responsible for sourcing one JLG lift and coordinating its delivery to the facility located at 6520 Glass Factory Road in Marcy, New York. To fulfill the requirements of this contract, the supplier must adhere to all New York Power Authority procurement standards, which includes managing the process through the Ariba portal. The contract is considered complete once the equipment is delivered to and formally accepted at the designated Marcy site.

Power Authority of New York

POSTED

about 13 hours ago

DEADLINE

Diesel Generator Set SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support Maritime Supply Chain, requires the supply of one Diesel Engine Generator Set for prime contractors. The equipment must strictly adhere to NSN 6115-01-416-6295 specifications and be delivered FOB Origin within 107 days. The supplier is responsible for ensuring all packaging meets ASTM D3951 standards and that marking and labeling comply with MIL-STD-129. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 423830.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Supply of Utility Shop Equipment Kits (NSN 4940-01-632-2998)This subcontract involves the supply of five utility shop equipment kits for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The required equipment must match Winzer Corporation Part Numbers C911164 or C9411164 and adhere to strict packaging and labeling standards, specifically ASTM D3951, RP001, and MIL-STD-129. All deliverables must comply with the Buy American Act and Berry Amendment requirements. The contract is categorized under NAICS code 423830 and specifies a place of performance in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 5, 2026, for the delivery of the five packaged and labeled kits.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 24 hours ago

DEADLINE

Supply of Pressure Relief Valves (NSN 4820123613817)This subcontract involves the procurement of six pressure relief valves for prime contractors supporting Department of Defense supply contracts through the DDSP New Cumberland Facility. The required hardware must be Mankenberg GmbH part number 6024050UA, adhering strictly to NSN 4820123613817 specifications. Compliance with RP001 DLA Packaging Requirements and RQ011 Government Identification removal standards is mandatory for all delivered units. Eligible providers must maintain a valid SAM.gov registration, a Unique Entity Identifier, and a CAGE code. The performance of this contract will take place in New Cumberland, Pennsylvania, under NAICS code 423830. Responses to this solicitation are due by November 5, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 24 hours ago

DEADLINE

Supply of Valve Actuator Handwheel CouplingsThis subcontract involves the procurement and delivery of two valve actuator handwheel couplings, specifically NSN 4820016716937 and Triumph Controls part number 90108-00, to support prime contractors on DLA supply contracts. The selected provider is responsible for ensuring all items are packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, while adhering to DLA RP001 procurement parcel requirements. The contract is managed under NAICS code 423830 for the Department of Defense. Delivery of the units is required FOB Origin to the DLA Distribution DDSP New Cumberland Facility located in New Cumberland, Pennsylvania. The response deadline for this opportunity is November 5, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 24 hours ago

DEADLINE

Supply of Safety Relief Valves (NSN 4820-01-531-2974)This subcontract involves the procurement and delivery of safety relief valves, specifically identified by NSN 4820-01-531-2974, to support prime contractors fulfilling Department of Defense supply contracts for the DDSP New Cumberland Facility. The selected provider must ensure all valves comply with the DLA Master Solicitation and all applicable technical and quality requirements. Physical delivery of the valves to the designated destination point in New Cumberland is required under FOB Origin shipping terms. To be eligible for this contract, providers must possess a valid Unique Entity Identifier and CAGE code. The opportunity was posted on October 25, 2026, with a response deadline of November 5, 2026. The work falls under NAICS code 423830, focusing on the specialized supply of these safety components to meet federal defense standards.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 24 hours ago

DEADLINE

Utility Shop Equipment Supplier (NSN 4940-01-632-2882)This subcontract involves the procurement or manufacture of one utility shop equipment kit intended for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The equipment must strictly adhere to NSN 4940-01-632-2882 and Winzer Corporation part number C9411163. The final deliverable must be a complete kit that is properly cushioned, marked, and accompanied by a detailed list of its contents. Compliance is required with several technical and regulatory standards, including RP001, MIL-STD-2073-1E, MIL-STD-129, and DFARS 252.204-7016. The performance of the contract is centered in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 5, 2026, under NAICS code 423830.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 24 hours ago

DEADLINE

Supply of Non-NSN Item (PN: GM9928)This subcontract involves the procurement of six units of non-NSN industrial part number GM9928 from manufacturer GMS Industrial Supply, Inc. to support prime contractors delivering for the DLA Weapons Support Land Supply Chain under the Department of Defense. The items are to be delivered FOB Destination to Fort Riley, zip code 66442-0000. The contractor is required to package the items according to QUP 001 and must ensure all hazardous materials are labeled in strict accordance with the Hazard Communication Standard 29 CFR 1910.1200. This requirement falls under NAICS code 423830, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Supply of Rigid Shaft Coupling (NSN 3010016053899)This subcontract involves the procurement of one warranted Rigid Shaft Coupling, specifically identified by NSN 3010016053899, to support prime contractors fulfilling DLA supply contracts. The selected provider must ensure the part meets all technical specifications and adheres to a strict five-day delivery window. While standard production is expected, the use of Additive Manufacturing is permitted provided it receives prior approval from the Engineering Support Activity. Managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, the contract falls under NAICS code 423830. The place of performance is designated as FPO 96322-1400. Interested parties must submit their responses by the deadline of November 5, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Supply of Critical Application Check ValvesThis subcontract involves the procurement and delivery of two 1-1/2 inch steel body industrial check valves for the Department of Defense, specifically managed by DLA Dist San Joaquin. The required components must strictly match the manufacturer specifications for William E. Williams Valve Corp part number 8863 15GLC 1 1/2IN and NSN 4820013053863. Due to the nature of the procurement, the items are classified as critical application components and must adhere to all specified marking requirements. The project is categorized under NAICS code 423830, with the place of performance located in Tracy, California. Interested parties must note the response deadline of November 5, 2026, following the posting date of October 25, 2026. The contract ensures that prime contractors receive hardware that meets rigorous military and industrial standards for critical infrastructure.

DLA DIST SAN JOAQUIN

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Flt Logistics Ctr Yokosuka

Same awarding agency

Heat Exchanger Overhaul ServicesThis subcontract involves the comprehensive overhaul of Port and Starboard heat exchangers for the Navy Yard Tug YT-807, supporting COMFLEACT Yokosuka. The scope of work includes the disassembly, cleaning, repair or replacement of components, testing, and final re-installation to ensure the units are fully operational. All services must be performed at the Yokosuka Naval Base in Japan. To ensure technical compliance, all work must align with Caterpillar OEM standards for the 3512C engine system, and the contractor is required to hold Caterpillar OEM Certification. This project is managed under the Department of Defense via the Navsup Fleet Logistics Center Yokosuka, falling under NAICS code 811310.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 5 hours ago

DEADLINE

Caterpillar Marine Engine Technical ServicesThis subcontract for Caterpillar Marine Engine Technical Services involves performing Diesel Engine Inspections and seal replacements for the port and starboard Caterpillar 3512C marine propulsion engines on Navy Yard Tugs YT-805 and YT-807. Supporting COMFLEACT Yokosuka through the Navsup Fleet Logistics Center Yokosuka, the project requires the delivery of completed inspections, seal replacements, and detailed technical inspection reports. The work will be performed at Yokosuka Naval Base in Japan and mandates the use of factory-trained, Caterpillar-certified marine service technicians. This requirement falls under NAICS code 811111, with a response deadline set for October 30, 2026.

General Automotive Repair

POSTED

about 5 hours ago

DEADLINE

Caterpillar 3512C Diesel Engine Inspections, YT-807 Heat Exchanger Overhaul (This is a sole source requirement and posting this solicitation to SAM.gov is information purpose only)

Solicitation # N6264927QB003

Solicitation N6264927QB003 is a sole source requirement issued by the Navsup Fleet Logistics Center Yokosuka to procure Caterpillar OEM certified technical labor and materials for US Navy Yard Tugs YT-805, YT-806, and YT-807. The scope of work includes comprehensive Diesel Engine Inspections and seal replacements for Caterpillar 3512C engines on YT-805 and YT-807, a complete overhaul of port and starboard heat exchangers for YT-807 to be returned as spare stock, and the acquisition of authorized Caterpillar OEM replacement parts, sensors, and critical spares for all three vessels. All technical labor must be performed by factory-trained, Caterpillar-certified marine service technicians, and all parts must be brand-new OEM components with factory warranties. The period of performance is scheduled from November 16, 2026, to January 29, 2027, with the place of performance located at Yokosuka Naval Base, Japan. Due to the location, the action is restricted to sources authorized to operate in Japan. Award will be based on the most advantageous offer considering price and technical capability, and quotations must be submitted on an all-or-none basis. The contractor is required to adhere to strict naval packaging and preservation standards, including MIL-STD-129 and MIL-STD-130 for marking and labeling. Additionally, the contractor must comply with ASME crane standards and OSHA regulations for any lifting operations. Payment will be processed electronically through the Wide Area WorkFlow system.

Ship Building and Repairing

POSTED

about 5 hours ago

DEADLINE

Marine Gas Free Certification ServicesThe Marine Gas Free Certification Services subcontract involves providing critical safety evaluations for vessel projects managed by the NAVSUP Fleet Logistics Center Yokosuka Site Singapore. The selected provider will be responsible for performing gas-freeing operations and issuing validated safety certificates to prime contractors, ensuring that environments are safe for hot work and repairs. This process requires the use of specialized ventilation equipment and gas detection meters to verify atmospheric safety. To qualify for this role, the provider must employ a Certified Marine Chemist or an authorized Gas Free Engineer. The work is designated to be performed in the Philippines under NAICS code 541620. Interested parties should note the response deadline of October 30, 2026, for this Department of Defense agency requirement.

Environmental Consulting Services

POSTED

DEADLINE

ASW Motor Controller RefurbishmentThis subcontract involves the refurbishment of three specialized Anti-Submarine Warfare motor controllers to support prime contractors on NAVSUP Fleet Logistics Center Yokosuka Site Singapore vessel projects. The work requires the use of electronic diagnostic tools and specialized components to restore full functionality in strict accordance with TARS-SWI technical specifications. Managed by the Department of Defense under NAICS code 335313, the project will be performed in the Philippines. The solicitation was posted on October 25, 2026, with a response deadline of October 30, 2026.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Electrical Motor Rewinding and Repair ServicesThis subcontract for Electrical Motor Rewinding and Repair Services involves providing specialized maintenance for prime contractors supporting NAVSUP Fleet Logistics Center Yokosuka vessel projects in Singapore. The scope of work focuses on the rewinding and repair of specific components, including spare LPAC motors, IC Gyro fan motors, and degaussing cabinet fan motors used in cranes and auxiliary machinery. All work must be performed using appropriate motor winding machinery and insulation materials in strict accordance with TARS-SWI Electrical Safety Procedures to ensure the delivery of fully functional spare motors. The project is managed under the Department of Defense and is categorized under NAICS code 335312. While the services support projects in Singapore, the designated place of performance is the Philippines. Interested parties should note the tight response window, with the solicitation posted on October 25, 2026, and a response deadline of October 30, 2026.

Motor and Generator Manufacturing

POSTED

DEADLINE

Hull and Structural Repair ServicesThis subcontract for Hull and Structural Repair Services supports prime contractors on NAVSUP Fleet Logistics Center Yokosuka vessel projects located in Singapore. The scope of work involves critical structural repairs and mechanical overhauls, including the rebuilding of jettison fuel racks, the overhaul and painting of hawser reels, and repairs to forepeak and main bilge suction reach rods. All exterior welding and industrial painting must be executed using structural steel and systems that adhere to TARS-SWI technical specifications. The project is managed under the Department of Defense with performance taking place in the Philippines. Key deliverables include the delivery of repaired fuel racks, overhauled reels, and certified welds. The contract is categorized under NAICS code 336611, focusing on specialized ship repair and maintenance services to ensure vessel operational readiness.

Ship Building and Repairing

POSTED

DEADLINE

Supplier of Metric Metal PlatesThis subcontract involves the procurement and supply of new metric metal plates to support prime contractors working on US Navy SRF-JRMC ship repair and maintenance projects. The selected supplier is responsible for sourcing the materials and coordinating door-to-door delivery directly to the A61 warehouse in Yokosuka, Japan. Additionally, the supplier must provide necessary specification information or catalogue copies when proposing equivalent items to ensure they meet project requirements. Managed under the Department of Defense through the Navsup Flt Logistics Ctr Yokosuka, the contract falls under NAICS code 331210. The opportunity was posted on October 25, 2026, with a response deadline of November 4, 2026. All performance of work and delivery of materials will take place in Yokosuka, Japan.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

DEADLINE

Supplier of Metric H-Shape Beams (JIS-G-3193)This subcontract involves the procurement and supply of 78 meters of new metric H-shape beams for prime contractors supporting US Navy SRF-JRMC projects in Yokosuka, Japan. The supplier is required to ensure all materials strictly adhere to SPEC JIS-G-3193 and must provide necessary specification information or catalogue copies for any equivalent items proposed. Managed by the Navsup Fleet Logistics Center Yokosuka under the Department of Defense, the contract requires the supplier to coordinate door-to-door delivery directly to the A61 warehouse. The project falls under NAICS code 331110, with a response deadline set for November 4, 2026.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

PLATE,METAL,METRIC and BEAM,H-SHAPE,METRIC for Ship Repair Facility and Japan Regional Maintenance Center (SRF-JRMC), US Naval Base, Yokosuka, Japan.

Solicitation # N6264927QB002

Solicitation N6264927QB002 is a firm-fixed-price request for the procurement of metric metal plates and metric H-shape beams for the Ship Repair Facility and Japan Regional Maintenance Center (SRF-JRMC) at the US Naval Base in Yokosuka, Japan. The requirement specifically includes 78 meters of H-shape beams adhering to JIS-G-3193 and steel plates meeting JIS-G-3106 SM400A standards, with strict tolerances for thickness and size. All items must be delivered FOB Destination, Door-to-Door, to the A61 warehouse by January 26, 2027. Refurbished products are prohibited, and any shipments weighing 30 pounds or more must be palletized. This acquisition is unrestricted and open to sources authorized to operate in Japan per DFARS 252.225-7042, with prime contractors outside of Japan required to provide proof of incorporation. Offers must be submitted on an all-or-none basis by November 4, 2026, including a signed SF 1449 and a detailed price breakdown. Award will be based on the most advantageous offer considering technical capability and the lowest price. Compliance requirements include strict adherence to MIL-STD-130 for unique item identification and MIL-STD-129 for shipment labeling, with electronic invoicing processed through the Wide Area WorkFlow system.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

DEADLINE

USNS SALVOR (T-ARS 52) VOYAGE REPAIR AVAILABILITY (VRA)

Solicitation # N6264927RLXXX

The NAVSUP Fleet Logistics Center Yokosuka Site Singapore intends to issue a competitive solicitation for a Voyage Repair Availability (VRA) for the USNS SALVOR (T-ARS 52). This pre-solicitation notice, identified by solicitation number N6264927RLXXX under NAICS code 336611, is for ship repair services tentatively scheduled for December 2026. The work will be performed at a contractor shipyard located in the Philippines. The scope of work encompasses general services and technical repairs, including hull and structural work such as rebuilding jettison fuel racks and overhauling hawser reels, as well as electrical repairs including motor rewinds and refurbishing ASW motor controllers. All work must adhere to TARS-SWI technical specifications, electrical safety procedures, and quality assurance protocols. To be eligible for award, offerors must maintain an active registration in the System for Awards Management (SAM.gov) and be authorized to conduct business in the Philippines. Interested ship repair firms, particularly those that have not previously worked with the government, are invited to submit a capability statement of five pages or less. This statement should be on company letterhead and include a firm description, shipyard location, relevant experience with U.S. Navy ships, and specific capabilities that align with the Work Item Index. Submissions must be emailed to the Contracting Officer, Mr. Gerry Polohanan, within fifteen calendar days of the synopsis issue date.

Ship Building and Repairing

POSTED

DEADLINE

7th Fleet Welder Qualification and Sustained Capability Program

Solicitation # SSP27-D001

The Department of the Navy, via NAVSUP FLC Yokosuka, is issuing a Request for Information (RFI) and Sources Sought notice under solicitation SSP27-D001 to identify qualified commercial ship repair facilities within the 7th Fleet Area of Responsibility, excluding Hawaii. The objective is to establish a welder qualification and sustained capability program to address capability gaps in ship repair and maintenance. The government intends to utilize FAR Part 12 for the acquisition of commercial products and services, potentially awarding Firm-Fixed-Price contracts based on technical merit, corporate experience in naval ship repair, and price reasonableness. The program is conceptually structured into a Base CLIN for the qualification phase and an Option CLIN for the execution of on-call warship structural voyage repairs. Technical requirements are strictly limited to Shielded Metal Arc Welding (SMAW) of carbon steel for plates 1/8 inch to 1-1/2 inch thick, adhering to AWS-NAVSEA B2.1-1-302:2015 and LWT 042-001 standards. Contractors must hold an active Master Ship Repair Agreement (MSRA) or Agreement for Boat Repair (ABR) and provide Non-Destructive Testing (NDT) capabilities, including visual, radiographic, and magnetic particle inspections. Interested sources must submit a capability statement not exceeding 10 pages, including their UEI, CAGE code, and a rough order of magnitude cost estimate by November 15, 2026.

Ship Building and Repairing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS