Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Automated Chemical Feed Skid and Components Supply

Active

State & Local

Response Deadline09/23/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of automated chemical feed skids and associated components for prime contractors working on Air National Guard facility projects at Otis ANGB in Camp Edwards, Massachusetts. The scope of work includes providing digital controllers, probes, secondary containment units, and pressurized vessels that must strictly comply with ASME BPVC Section VIII-2023 standards. The supplier is responsible for delivering the hardware to the project site along with all necessary technical data, equipment cut sheets, and safety data sheets for pre-loaded chemicals. This procurement is managed by the Military Division of Massachusetts under NAICS code 333999, with a response deadline set for September 23, 2026.

General Info

Supply automated chemical feed skids for Air National Guard projects at Otis ANGB.

Agency

Massachusetts → MILDV - Military DivisionView Agency

NAICS

333999 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

Beamon St Camp Edwards, MA, 02542, USA

Set-Aside

NONE

Documents

This scope was carved out of BD-27-1069-MILDV-40000-133533.

The full solicitation package (12 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ITB SPBN262009 Bldg 168 Chilled Water Chemical Feed System Replacement (Otis ANGB, MA)

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 16

subcontract

Response DeadlineSep 23

Submission deadline

Response Deadline

09/23/2026, 03:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMassachusetts → MILDV - Military Division

ContactsNo contacts available

OfficeN/A

Organization / Agency

Massachusetts → MILDV - Military Division

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies hardware for prime contractors on Air National Guard facility projects at Otis ANGB. Provides automated chemical feed skids, digital controllers, probes, and secondary containment units. Equipment must comply with ASME BPVC Section VIII-2023 for pressurized vessels. Provides technical data, equipment cut sheets, and SDS for pre-loaded chemicals. Delivers specified hardware to the project site.

Similar Contracts

Same NAICS industry code

Axial Fan Impeller Fabrication and SupplyThis subcontract for the Defense Logistics Agency involves the fabrication and supply of axial fan impellers for prime contractors. The manufacturer is responsible for producing these components using precision CNC machining, casting, or forging, ensuring all work adheres to the DLA Master List of Technical and Quality Requirements RA001. Key operational requirements include applying markings per MIL-STD-129 and removing government identification according to RQ011. Final deliverables must include the finished impellers along with the necessary marking and WAWF documentation. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026, under NAICS code 333999.

Defense Logistics Agency

POSTED

DEADLINE

Engine Cooling System Pump SupplierThis subcontract opportunity with the Department of Defense Land Supply Chain involves the manufacture or sourcing of one engine cooling system pump for prime contractors supporting DLA supply contracts. The supplier must ensure the pump complies with the DLA Master List of Technical and Quality Requirements RA001 and adheres to MIL-STD-129 for all marking and labeling. Additionally, the contractor is required to implement basic safeguarding of covered contractor information systems in accordance with FAR 52.240-93. The procurement falls under NAICS code 333999 and was posted on September 15, 2026, with a response deadline of September 28, 2026. The final deliverable consists of one properly marked and packaged engine cooling system pump.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Fluid Pressure Dampener Production (NSN 6685-01-090-4361)This subcontract with the Department of Defense ASC Supplier Oper OEM Division involves the manufacture and supply of 27 Fluid Pressure Dampener units under NSN 6685-01-090-4361. The contractor is responsible for fabricating the units and executing First Article Tests to verify all technical specifications, culminating in the delivery of the units and a successful test report. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 333999. The contractor must ensure strict adherence to MIL-STD-129 and MIL-STD-2073-1E for packaging and marking, as well as 29 CFR 1910.1200 for hazardous material labeling. The response deadline for this opportunity is September 23, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Air Compressor and Solar Power IntegrationThis subcontract, titled Air Compressor and Solar Power Integration, involves the supply and installation of pneumatic and electrical support systems for prime contractors on Department of Defense projects at Dyess AFB. The scope of work includes the installation of an air compressor with a hose and reel for tire inflation, as well as a solar battery charger designed to maintain the electric start system using solar panels and battery charging controllers. All work must adhere to established electrical safety standards to ensure the successful delivery of the installed air compressor system and solar charging array. The opportunity is designated as a Total Small Business Set Aside under NAICS code 333999 and is managed by the Department of Defense agency FA4661 7 Cons Cd. The project is located at Dyess AFB in zip code 79607. Interested parties must submit their responses by the deadline of September 23, 2026.

FA4661 7 Cons Cd

POSTED

DEADLINE

Dockside Handling System Design and IntegrationThis subcontract for the Dockside Handling System Design and Integration supports NUWC Division Newport projects within the Department of Defense. The selected provider will design and integrate mechanical handling components, specifically engineering a dockside system utilizing hoists, winches, rollers, and specialized lifting mechanisms to ensure full compatibility with transporters and naval pier environments. The project requires strict adherence to security and operational standards, including JCP Certification and NIST SP 800-171 compliance. The final deliverable is a fully integrated dockside handling mechanism, with the solicitation process concluding on September 22, 2026.

Nuwc Division Newport

POSTED

DEADLINE

Hydraulic Drive Unit Repair and OverhaulThis subcontract for the Department of the Navy's Navsup Weapon Systems Support involves the teardown, evaluation, and repair of hydraulic drive units, specifically NSN 7RH 1650-01-452-5179 V2. Work must be performed in accordance with 42555-52 and relevant technical drawings using hydraulic test benches to ensure all units are delivered in Ready For Issue condition. The project requires strict adherence to AS9100 quality standards and the use of SAE-AS22759 wire. All calibration must comply with ANSI/NCSL Z5400 or ISO-10012-1. The performance of this contract is based in Philadelphia, with a response deadline of October 15, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Supplier of Control Cams (NSN 3040007909707)This subcontract involves the procurement or manufacture of three Control Cam units matching NSN 3040007909707 for the Department of Defense, specifically under the Land Supplier Operations Vehicle Support agency. The items are to be delivered to the DLA Distribution Depot Oklahoma at Tinker AFB. The supplier must ensure strict adherence to MIL-STD-129 labeling requirements and the Hazard Communication Standard 29 CFR 1910.1200. Additionally, the contract mandates compliance with DFARS 252.204-7012 and CMMC Level 2 cybersecurity standards. The response deadline for this opportunity is September 25, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Big Boy Hose Monster Industrial EquipmentThis subcontract agreement involves the supply of Big Boy Hose Monster industrial machinery for prime contractors operating on Petrojam Limited projects under the Government of Jamaica. The scope of work includes the manufacturing and sourcing of heavy-duty industrial-grade hose management and deployment equipment, ensuring that all delivered units strictly adhere to the provided procurement specifications. The contract is categorized under NAICS code 333999 and was posted on September 14, 2026. It establishes a formal requirement for the delivery of specialized machinery designed for rigorous hose handling tasks within the operational framework of Petrojam Limited.

Petrojam Limited

POSTED

DEADLINE

Furnace F1 Burner Spare Parts SupplyThis subcontract involves the supply of specialized industrial machinery parts for the Furnace F1 Burner system at Petrojam Limited facilities. The contractor is responsible for manufacturing or sourcing precision spare parts for industrial furnaces in accordance with CPV 42000000 standards to support prime contractors on these projects. The agreement is managed under the Government of Jamaica for Petrojam Limited and is categorized under NAICS code 333999. The primary objective of the contract is the successful delivery of all required spare parts necessary for the operation and maintenance of the Furnace F1 system.

Petrojam Limited

POSTED

DEADLINE

Altitude Test Chamber Blower SupplyThis subcontract, managed by the Department of Defense under agency FA8125 Afsc Pzima, requires the manufacture or sourcing of one replacement blower assembly for altitude test chamber projects at Tinker AFB. The equipment must adhere to Requirements 2026-0039552 and PSC 4310, with mandatory IUID marking in compliance with MIL-STD-130 and ISO/IEC 16022. Delivery is specified as FOB Destination, and any items exceeding 150 lbs must be palletized for forklift handling. The opportunity is designated as a Total Small Business Set Aside under NAICS code 333999. The project is located in zip code 73145, with a response deadline of September 18, 2026.

FA8125 Afsc Pzima

POSTED

DEADLINE

Dual Wheel DollyThis subcontract through the General Services Administration Supply Chain Management Contracting Division involves the provision of heavy-duty dual wheel dollies designed for vehicle maneuvering. The equipment must feature a minimum load capacity of 1,500 lbs and a maximum lift height of 41.5 inches, while adhering to Federal Standard 123 for the marking of supplies. The contract is categorized under NAICS code 333999 and specifies Fort Hood as the place of performance. Interested parties must respond by September 17, 2026, to support prime contractors operating under GSA/FAS supply contracts.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

in about 15 hours

Heavy-Duty Transmission JackThis subcontract opportunity through the General Services Administration's Supply Chain Management Contracting Division involves the procurement of high-capacity transmission jacks for heavy-duty fleet maintenance. The required equipment must feature a minimum lifting capacity of 4,400 lbs and a minimum handle length of 32 inches, while adhering to Federal Standard 123 for the marking of supplies. The contract is categorized under NAICS code 333999 and is designated for performance at Fort Hood. Interested parties must respond by September 17, 2026, following the posting date of September 11, 2026.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

in about 15 hours

More opportunities from Massachusetts → MILDV - Military Division

Same awarding agency

Chemical Feed System Electrical Wiring and Control InstallationThis subcontract for the Chemical Feed System Electrical Wiring and Control Installation involves providing electrical installation and integration services for prime contractors at the Otis Air National Guard Base in Camp Edwards. The project requires a certified electrician to install and wire digital controllers and probes, ensuring the automated skid is fully integrated into the building electrical system. A critical component of the scope includes coordinating electrical lockouts with facility management to ensure safety and compliance. The primary objective is to deliver a fully powered and functional digital control system for the chemical feed skid. This opportunity, managed by the Military Division of Massachusetts, falls under NAICS code 238210. Interested parties must respond by September 23, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 13 hours ago

DEADLINE

Chilled Water Loop Cleaning and Water Quality AnalysisThis subcontract for Chilled Water Loop Cleaning and Water Quality Analysis involves performing water testing, flushing, and chemical cleaning for prime contractors at the Otis Air National Guard Base. The scope of work includes extracting samples for baseline analysis of pH, TDS, and biological activity through accredited third-party laboratories, with all chemical applications managed according to ASHRAE Guideline 12-2023. The selected provider must obtain SDS approval from the Otis ANGB Bioenvironmental and Environmental Office and is responsible for delivering a cleaned loop along with a comprehensive baseline water quality analysis report. This project is managed by the Military Division of Massachusetts and is located at Camp Edwards.

Environmental Consulting Services

POSTED

about 13 hours ago

DEADLINE

Chilled Water Chemical Feed System InstallationThis subcontract for the Chilled Water Chemical Feed System Installation involves the installation of a new automated chemical feed skid at the Otis Air National Guard Base facility. The project requires the decommissioning of legacy injectors and the mechanical integration of piping into closed-loop chilled water systems, adhering to UFGS 23 25 00 and UFC 3-410-01 standards. All vessels must be ASME BPVC Section VIII-2023 compliant and include secondary containment. The work is managed under NAICS code 238220 and requires a lead mechanical pipefitter to ensure the delivery of a fully operational system. Performance will take place at Camp Edwards on Beamon Street in zip code 02542. The solicitation was posted on September 16, 2026, with a response deadline of September 23, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 13 hours ago

DEADLINE

ITB SPBN262009 Bldg 168 Chilled Water Chemical Feed System Replacement (Otis ANGB, MA)

Solicitation # BD-27-1069-MILDV-40000-133533

This solicitation, identified as BD-27-1069-MILDV-40000-133533, is issued by the Military Division in Massachusetts for the replacement of the chilled water chemical feed system at Building 168 in Camp Edwards, Massachusetts. The scope of work includes performing comprehensive water testing, flushing and cleaning the chilled water loop, decommissioning and removing the legacy injector, and installing a new, fully automated chemical feed skid. The project is managed by the Military Division with the primary point of contact being Michaela Kochka. Interested parties must submit their responses by the deadline of September 23, 2026, at 3:00 PM. The performance of these services will take place at the Beamon Street location within Camp Edwards, Massachusetts.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 13 hours ago

DEADLINE

Paving Material SupplierThis subcontract opportunity is for a Paving Material Supplier to provide asphalt, aggregate, and stabilization materials for prime contractors working on 102d Civil Engineering Squadron projects at Otis ANGB. The selected supplier is responsible for hauling these materials to the site using dump trucks and asphalt delivery trucks, ensuring all materials meet the specific quality certifications required by the 102d Civil Engineering Squadron. The project is managed by the Military Division in Massachusetts and will be performed at Camp Edwards on Beamon Street. Interested parties must submit their responses by September 24, 2026, in accordance with the solicitation posted on September 10, 2026.

Asphalt Paving Mixture and Block Manufacturing

POSTED

DEADLINE

Pavement Marking SubcontractorThis subcontract opportunity is for a pavement marking specialist to provide thermoplastic striping services for prime contractors on 102d Civil Engineering Squadron projects at Otis ANGB in Camp Edwards, Massachusetts. The selected provider must utilize thermoplastic striping machines and heating kettles in strict accordance with base specifications to deliver completed road markings. Compliance requirements include mandatory OSHA 10-hour construction safety certification and adherence to DLS Prevailing Wage standards. Interested parties must submit their responses by September 24, 2026, under NAICS code 238990.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Roadway Paving SubcontractorThis subcontract opportunity is for a roadway paving specialist to install new asphalt or concrete surfaces for prime contractors supporting 102d Civil Engineering Squadron projects at Otis ANGB. The selected subcontractor will be responsible for delivering completed paved roadways using pavers, rollers, and asphalt distributors, ensuring all work adheres to specific project plans and technical specifications. The project is located at Camp Edwards in the 02542 zip code area. Key compliance requirements include a mandatory OSHA 10-hour construction safety certification and adherence to DLS Prevailing Wage standards. Interested parties must submit their responses by September 24, 2026, at 3:00 PM.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Subgrade Stabilization SpecialistThe Subgrade Stabilization Specialist subcontract involves performing road base stabilization for prime contractors on 102d Civil Engineering Squadron projects at Otis ANGB in Camp Edwards, Massachusetts. The selected provider will utilize soil stabilizers, compactors, and grading equipment to deliver a stabilized and compacted road subgrade that meets all structural integrity and project specifications. Compliance requirements include mandatory OSHA 10-hour construction safety certification and adherence to DLS Prevailing Wage standards. This opportunity falls under NAICS code 238910 and is managed by the Military Division of Massachusetts, with a response deadline of September 24, 2026.

Site Preparation Contractors

POSTED

DEADLINE

Road Milling SubcontractorThe Road Milling Subcontractor contract involves the removal of existing asphalt layers for prime contractors supporting 102d Civil Engineering Squadron projects at Otis ANGB. The selected subcontractor will utilize cold milling machines and hauling trucks to mill base roadways according to specific project plans, ensuring the surface is prepared for subsequent subgrade work. This subcontract falls under NAICS code 237310 and is managed by the Military Division in Massachusetts. To be eligible, personnel must hold an OSHA 10-hour construction safety certification and maintain compliance with DLS Prevailing Wage requirements. The project is located at Camp Edwards in the 02542 zip code, with a response deadline of September 24, 2026.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

ITB SPBN262010 Road Repaving (Otis ANGB, MA)

Solicitation # SPBN262010

The Massachusetts Military Division is soliciting bids for project SPBN262010 to repave approximately 2,500 linear feet of an active arterial road at Otis Air National Guard Base, Joint Base Cape Cod. The scope of work includes asphalt milling, subgrade stabilization, the installation of a 4.0-inch heavy-duty pavement system consisting of a 2.0-inch binder course and a 2.0-inch surface course, and the application of high-visibility thermoplastic striping. There is also an add-alternate option to pave approximately 260 linear feet of an existing gravel access road. The estimated contract value is 385,000.00 dollars, and the award will be granted to the lowest responsible and eligible bidder. Bids must be submitted electronically via the COMMBUYS portal by September 24, 2026. A mandatory site visit is scheduled for September 16, 2026. Required submission documents include a lump sum General Bid Form, an Authorized Signatory Form, a Certificate of Non-Collusion, and a MA Tax Compliance Form. For bids exceeding 50,000.00 dollars, a 5% bid bond is required, and the awarded contractor must provide a payment bond equal to 50% of the project cost for projects over 25,000.00 dollars. The project is governed by the General Conditions of the Contract for Site Work under MGL c.30 section 39M and requires adherence to Department of Labor Standards prevailing wage rates and OSHA construction safety standards, including a mandatory 10-hour safety course for all employees. Personnel accessing the facility must comply with REAL ID requirements. All work must meet MassDOT, MUTCD, and DoD Unified Facilities Criteria standards. Payment will be processed through the Commonwealth's Comptroller system, with options for prompt payment discounts.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

High-Performance Concrete SupplyThis subcontract involves the supply and delivery of marine-grade ready-mix concrete for prime contractors working on Massachusetts National Guard facility projects at Otis ANGB. The required concrete must be specifically formulated for high performance, featuring resistance to coastal salt-air and freeze-thaw cycles to ensure durability in the local environment. The project is managed by the Military Division of Massachusetts and will be performed at Camp Edwards on Beamon Street in zip code 02542. This opportunity falls under NAICS code 327320, with a response deadline set for September 24, 2026.

Ready-Mix Concrete Manufacturing

POSTED

DEADLINE

Structural Metal Canopy/OverhangThis subcontract involves the design, fabrication, and installation of a structurally sound, all-metal overhead canopy for the Massachusetts National Guard facility at Otis ANGB. The scope of work includes engineering the structure and anchoring it to Building 197 and a concrete pad, utilizing corrosion-resistant coatings specifically designed for marine environments. All work must be performed in compliance with Massachusetts Prevailing Wage schedules. The project is managed by the Military Division of Massachusetts under NAICS code 238390, with the place of performance located at Camp Edwards on Beamon St. The response deadline for this opportunity is September 24, 2026. The final deliverable is a fully installed, structurally sound metal canopy.

Other Building Finishing Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS