This Solicitation opportunity from Department Of Health And Human Services was posted on August 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Automated MTS Load Cell

Closed

75F40126Q00410Federal

Submission Closed09/01/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334519

New

Federal

Haskel Booster System

Solicitation # 80NSSC27946054Q

NASA/NSSC is seeking the firm-fixed-price procurement of one Haskel Booster System Model 80512. The agency intends to issue a sole source contract to PHC Fluid Power, L.L.C. of Broussard, Louisiana, under the authority of FAR 12.102(a), as they have been determined to be the sole provider of this system. This procurement is classified under NAICS code 334519 and follows the provisions and procedures prescribed in FAR Part 12 for commercial items. The contractor is required to deliver the hardware and a Certificate of Conformance to Building 2204 at the Stennis Space Center in Mississippi no later than 12 weeks after the contract award. Acceptance of the system is contingent upon delivery, inspection, and verification of compliance with the Statement of Work. Interested organizations were invited to submit capabilities and qualifications by October 23, 2026, for the purpose of determining whether to conduct the procurement on a competitive basis.

NASA Shared Services Center

POSTED

DEADLINE

Purchase of Sixteen (16) Handheld Lidar Speed Detection Devices

Solicitation # RFB 27-016

The City of Clermont is soliciting bids under RFB 27-016 for the purchase and delivery of sixteen new handheld Lidar speed detection devices for the Clermont Police Department. The specified equipment is the DragonEye Speed Lidar, Model 40120-01, or a City-approved equivalent. The estimated project value is 35,000 dollars. All items must be new, unused, current standard production models, and delivered F.O.B. Destination to the Clermont Police Department within sixty consecutive calendar days following the issuance of the purchase order. The contract requires a minimum two-year manufacturer's warranty for all equipment. Bidders must submit responses electronically via the OpenGov Portal by November 19, 2026. Evaluation will be based on a supplemental questionnaire considering relevant experience, past performance, and the ability to deliver within the required timeframe. Key compliance requirements include E-Verify certification, adherence to Florida Executive Order 22-216 regarding ICT vendor restrictions, and the submission of a W-9 and proof of insurance. No bid bonds, performance bonds, or liquidated damages are required for this solicitation, and there are no available options for renewal.

POSTED

DEADLINE

Rain Guage & Data Logger - Gheorghe - 27035018

Solicitation # SRC0000037229

This solicitation, issued by the Alabama Water Investigations agency, seeks a provider for a Rain Gauge and Data Logger. The procurement is managed through the Alabama Buys portal, with a response deadline of October 23, 2026. The total contract value is capped at 25,000 dollars, which includes the original agreement and any subsequent annual renewals over a maximum period of five years. Award evaluation will be based on pricing, with the state reserving the right to analyze cost realism and price reasonableness, and may require proof of professional licenses, insurance certificates, or manufacturer reseller authorizations. The contract is governed by the laws of the State of Alabama, with the City of Montgomery serving as the sole venue for litigation. Key compliance requirements include mandatory E-Verify enrollment for suppliers with employees in Alabama and registration with the Alabama Secretary of State for foreign corporations. Suppliers must certify they are not engaged in boycotts of jurisdictions with which Alabama enjoys open trade and must comply with state tax laws. Payment will be made via electronic methods, including state-issued credit cards, P-cards, or EFT, and the state is exempt from paying sales tax.

POSTED

DEADLINE

Solicitation # SPE4A727T1699

POSTED

DEADLINE

Solicitation # SPE7M127Q0089

POSTED

DEADLINE

Eddy Current Array Instrument (Reddy)

Solicitation # 80NSSC27943761Q

The National Aeronautics and Space Administration NASA Shared Services Center is soliciting quotes for the procurement of one portable Eddyfi Technologies Reddy 128-channel surface Eddy Current Array ECA nondestructive evaluation NDE system. This firm-fixed-price requirement is designated as a small business set-aside under NAICS code 334519. The system is intended to mirror an existing unit to ensure mission assurance, ground testing, and redundancy for upcoming NASA mission needs. The complete package must include the main instrument with an integrated multi-touch display, required probes, software, batteries, power supply, a carrying case, and manufacturer operating manuals. The contract will be awarded to the responsible offeror based on the lowest price technically acceptable LPTA basis. To avoid automatic disqualification, offerors must provide proof of manufacturer pricing, a letter of authorization to resell the products, and their SAM CAGE code or UEI. Delivery is specified as FOB Destination to Greenbelt, Maryland, with an estimated lead time of four weeks. Quotes must be submitted to Cody Guidry by October 26, 2026, and must include all shipping costs. The government will verify that the equipment is operational and compliant with manufacturer specifications upon receipt.

NASA Shared Services Center

POSTED

DEADLINE

66--GAGE,PRESSURE,DIAL IND

Solicitation # SPE4A627T5593

POSTED

DEADLINE

Portable Moisture Density Gauges

Solicitation # 54-JJ-12230578

The North Carolina Department of Transportation Materials and Tests Unit is soliciting bids for a one-time purchase of 85 portable moisture-density gauges designed for field measurements of soil, asphalt, and base materials. The scope of work requires the selected vendor to provide equipment conforming to ASTM D2950 and ASTM D8167 standards, dispose of 146 existing nuclear density gauges, and provide comprehensive classroom and field training for division supervisors. Additionally, the state may opt for a maintenance package consisting of at least two preventive and safety inspections per year. The contract will be awarded to the responsive bidder offering the lowest price that meets all specifications, with promptness of delivery serving as a potential evaluation factor. Vendors must submit their proposals electronically via the electronic Vendor Portal by November 2, 2026, and include required certifications regarding financial condition, worker locations, and compliance with North Carolina General Statutes, including E-Verify and fair employment standards. Payment is contingent upon inspection and formal acceptance by the Contract Manager, and the total contract value is indicated to be in excess of 1,000,000.00 dollars for insurance purposes.

Department of Transportation

POSTED

DEADLINE

CONTROLLER,HMI — 5998016760453 — SPRMM126QGG71

Solicitation # SPRMM126QGG71

This solicitation, issued by NAVSUP Weapons Systems Support (SPRMM1 DLA Mechanicsburg), seeks the manufacture and provision of an HMI Controller (NIIN 016760453) based on TDP Version 003 and the design represented by Cage Code 23822, reference number SD012200-71191-4. Award consideration is strictly limited to the original manufacturer or authorized distributors, who must provide proof of authorization on signed company letterhead. The contract mandates strict adherence to physical identification standards per MIL-STD-130 Rev N and packaging requirements according to MIL-STD-2073, with specific packing levels defined for domestic and overseas shipments. The contractor is responsible for all inspection and quality assurance at the point of origin, though the government reserves the right to perform independent inspections. Key administrative requirements include the use of the Wide Area Workflow (WAWF) system for electronic invoicing and payment. Compliance with cybersecurity standards is required under DFARS 252.204-7012 for safeguarding covered defense information. Additionally, any hazardous materials delivered must be accompanied by GHS-compliant labels and Safety Data Sheets submitted to NAVSUPWSS Code N242. All substitutions or design changes, except for simple part number updates, require written approval from the NAVICP-MECH Contracting Officer.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

W7701-278140 Leica Nova TS60 Robotic Total Station and GNSS Survey System [W7701-278140 Station totale robotisée Leica Nova TS60 et système de levé GNSS]

Solicitation # Doc5896985484

The Government of Canada is soliciting offers for the procurement of one Leica Nova TS60 Robotic Total Station and GNSS Survey System, including all listed accessories, for the Department of National Defence. All equipment must be delivered to the DRDC Suffield Research Centre in Ralston, Alberta, no later than March 31, 2027. The government strictly requires the exact brand, model, and part numbers specified in the solicitation and will not accept any substitute products. Interested parties must be fully registered in CanadaBuys and SAP Ariba to participate. All communications, including questions and the monitoring of amendments, must be conducted through the event messages tab or event contents section of the SAP Business Network. Late submissions will not be accepted, and the deadline for responses is November 13, 2026.

Government of Canada / Gouvernement du Canada

POSTED

DEADLINE

Solicitation # SPE4A0-27-T-0155

Solicitation SPE4A0-27-T-0155, issued by the DLA Weapons Support Aviation Supply Chain ESOC Buys, is a request for quotations for two interval timers, identified by NSN 6645016667618. This item is classified as a commercial off-the-shelf product for critical application, specifically associated with CPI Satcom and Antenna Technologies Inc. part number U044-12-2016-02. The required delivery timeline is five days after order, with an original required delivery date of July 30, 2025. Shipping is designated as FOB Origin and must be sent via the fastest traceable means to Peterson Air Force Base, Colorado. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Inspection and acceptance will occur at the destination. Quality assurance requires sampling in accordance with MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Administrative requirements include the use of Wide Area Workflow for invoicing and payment, and compliance with various FAR and DFARS clauses regarding small business representations, cybersecurity, and the Buy American Act. Item Unique Identification is not required for this procurement.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

TRANSMITTER, LIQUID QUA

Solicitation # SPE4A6-27-T-5289

Solicitation SPE4A6-27-T-5289 is a fixed-price contract issued by the DLA Weapons Support ASC Commodities Division for the procurement of two liquid quantity transmitters, identified by NSN 6680013224166. The items are to be delivered to the USS Michael Murphy DDG 112, with an original required delivery date of October 14, 2026, and a delivery window of 20 days after the order. Inspection and acceptance will occur at the destination. The contractor is required to use the Wide Area WorkFlow system for electronic invoicing and payment requests. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. A critical safety requirement prohibits the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging. Quality assurance will be conducted using sampling methods per MIL-STD-1916 or ASQ H1331. The procurement is subject to various federal regulations, including the Buy American Act, DFARS cybersecurity reporting requirements, and specific NAICS code 334519 size standards. Offerors are encouraged to submit quantity ranges via DIBBS and must disclose the use of any non-domestic materials.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days

AI Contract Overview

The contractor is required to provide a fully operational load measurement solution for the Government-owned MTS Mini-Bionix 858 system, including one load cell transducer and all necessary labor, materials, and installation services. The solution must be capable of measuring 0N to plus or minus 22,000N in tension and compression, and 0Nm to plus or minus 200Nm in torsion. The scope of work encompasses the removal of the existing transducer, fabrication and installation of interface plates, operational verification, and on-site force and torque calibration in accordance with ASTM E4-21 and ASTM E2624-17 standards with NIST-traceable certificates. The provided hardware must be compatible with existing MTS controller hardware, software, and data acquisition interfaces, specifically the load frame model 370.02. A minimum twelve-month warranty is required starting from final Government acceptance, covering all parts, labor, travel, and technical support. This non-personal services requirement is issued by the FDA Office of Acq Grant Svcs, with performance taking place in Silver Spring, Maryland.

General Info

Contractor provides load measurement solution, installation, and calibration for FDA MTS Mini-Bionix system.

Agency

Department Of Health And Human Services → FDA Office Of Acq Grant Svcs

NAICS

334519 - Other Measuring and Controlling Device Manufacturing

Place of Performance

Silver Spring, MD, 20993, USA

Set-Aside

NONE

Documents

FDA Statement of Work - Load Cell Transducer Replacement

4 pages · sow

High

Solicitation 75F40126Q00276 – Load Cell Transducer

8 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 27

Solicitation

Response DeadlineSep 1

Deadline has passed

Submission Closed

09/01/2026, 04:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Health And Human Services → FDA Office Of Acq Grant Svcs

Contacts2 people available

OfficeRockville, MD, 20852, USA

Organization / AgencyDepartment Of Health And Human Services → FDA Office Of Acq Grant Svcs

Office AddressRockville, MD, 20852, USA

Contacts

Reagan Davis

Iris Johnson

Full Description

The contractor shall provide one (1) load cell transducer and all labor, materials, equipment, installation services, calibration services, interface hardware, travel, and incidental items necessary to provide a fully operational load measurement solution compatible with the Government-owned MTS Mini-Bionix 858 system. The requirement includes removal of the existing load cell transducer, fabrication and installation of the required top interface plate and bottom adapter plate, operational verification, documentation, and all accessories necessary to provide a fully operational solution. The MTS Mini-Bionix 858 system is identified as the reference platform for compatibility purposes only. Equivalent products meeting all stated salient characteristics and interoperability requirements will be considered. This is a non-personal services requirement. The load cell transducer and associated hardware shall include a minimum twelve (12)-month warranty beginning at final Government acceptance. The warranty shall cover all parts, labor, travel, and technical support required to return the transducer to full operating condition.

Minimum Technical Requirements (Salient Characteristics)

The following salient characteristics represent the Government's minimum requirements.

Load cell transducer capable of measuring 0N to ±22,000N in tension and compression.

Load cell transducer capable of measuring 0Nm to ±200Nm in torsion.

Compatible with existing MTS controller hardware, software configuration, and data acquisition interfaces without requiring replacement of the existing MTS Mini-Bionix 858 system.

Compatible with MTS Mini-Bionix 858 load frame model 370.02

Compatible with existing TDS connectors or provide a complete interface solution.

Support load and torque reporting functionality.

Provide all adapters, interface hardware, fabricated top interface plate, fabricated bottom adapter plate, mounting hardware, and all accessories necessary to provide a fully operational solution. The MTS Mini-Bionix 858 system is identified as the reference platform for compatibility purposes only.

On-site force calibration shall be performed in accordance with ASTM E4-21 from 1% to 100% capacity, and on-site torque calibration shall be performed in accordance with ASTM E2624-17 from 1% to 100% capacity. Calibration shall include NIST-traceable calibration certificates.