Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Automotive Axle Housing Casting and Forging

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the production of raw formed metal housing sections to support prime contractors for the DLA Weapons Support Land Supply Chain. The selected provider will be responsible for the casting or forging of axle housing sections that strictly adhere to CNH Industrial P/N 87673991 geometry and material strength specifications for critical application items. All deliverables must be provided as raw or semi-finished sections accompanied by detailed mill test reports. The project is managed under NAICS code 331222 and requires strict adherence to environmental standards, specifically the avoidance of Class I ozone-depleting chemicals. Performance for this contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by the deadline of October 23, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

331222 - Steel Wire Drawing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-27-T-1174.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HOUSING SECTION, AXLE A

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 12

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw formed metal housing sections for prime contractors delivering DLA Weapons Support Land Supply Chain contracts. Performs casting or forging of axle housing sections to meet CNH Industrial P/N 87673991 geometry and material strength requirements for critical application items. Must avoid Class I ozone-depleting chemicals. Delivers raw or semi-finished axle housing sections with mill test reports.

Similar Contracts

Same NAICS industry code

Aircraft Former Metal CastingThis subcontract involves the metal casting of four aircraft formers under NSN 1560-01-260-1061 for the DLA Weapons Support ASC Supplier Oper OEM Division. The project requires strict adherence to casting processes that prohibit the use of additive manufacturing, with quality sampling conducted according to MIL-STD-1916 or ASQ H1331 standards. Performance will take place in New Cumberland, Pennsylvania. To be eligible, contractors must maintain CMMC Level 2 certification and hold either SAE AS9003 or ISO 9001 quality management certifications. Additionally, full compliance with ITAR and EAR regulations is mandatory. The solicitation was posted on October 13, 2026, with a response deadline of October 21, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Casting and Forging of Pressure Relay Housing ComponentsThis subcontract involves the casting or forging of metal housing and elbow components for the DLA Weapons Support Fluid Handling Division. The contractor is responsible for producing parts according to GE P/N 575E773-008 specifications, which includes performing heat treatment and rough machining. To qualify, the provider must utilize industrial casting furnaces or forging presses and ensure all materials comply with submarine-grade pressure vessel standards. The project requires strict adherence to the Buy American Act and all DLA and Navy material certifications. Performance will take place in New Cumberland, Pennsylvania, with the final delivery consisting of rough-cast or forged components. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Aerospace Structural Castings and ForgingsThis subcontract opportunity, titled Aerospace Structural Castings and Forgings, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project requires the supply of raw cast or forged aluminum alloy blanks for prime contractors, specifically casting or forging metal components to near-net shapes as defined by the technical data package for NSN 1560-00-248-9209. Performance will take place at Robins Air Force Base. The contract is designated as a Total Small Business Set-Aside under NAICS code 331222. Strict adherence to ITAR and EAR compliance is mandatory for the handling of technical data, and all delivered blanks must include material certification to verify alloy purity. Interested parties must respond by October 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Weapon System Component Casting and ForgingThis subcontract for Weapon System Component Casting and Forging involves the supply of 33 raw cast or forged metal blanks to prime contractors supporting the DLA Weapons Support ASC. The selected provider is responsible for casting or forging metal parts to the rough dimensions specified in the Technical Data Package, which must include comprehensive material certification and metallurgical testing. Performance will take place in Texarkana, Texas, under NAICS code 331222. Due to the nature of the technical data, the contractor must maintain JCP certification for access to export-controlled information and ensure full ITAR compliance. The solicitation was posted on October 8, 2026, with a response deadline of October 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Specialized Casting or Forging SupplyThis subcontract opportunity is for the supply of raw cast or forged metal blanks to support prime contractors on DLA Weapons Support ASC projects. The selected provider will be responsible for casting or forging metal blanks to preliminary dimensions as specified in the Technical Data Package using industrial presses or furnaces. All deliverables must include material certifications and adhere strictly to the Buy American Act. Additionally, contractors must be part of the US/Canada Joint Certification Program to gain necessary access to technical drawings. The project is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Hill AFB. This is a total small business set-aside under NAICS code 331222. Interested parties must submit their responses by October 15, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 3 hours

Custom Forging and Casting for Aerospace FastenersThis subcontract opportunity, titled Custom Forging and Casting for Aerospace Fasteners, is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The project involves the casting or forging of raw, near-net shape blanks for NSN 5305-01-600-0708 to be used by prime contractors. Performance will take place at Tinker AFB, and the selected provider must possess industrial forging presses or casting furnaces, as well as JCP certification to access necessary technical data. The contract is designated as a Total Small Business Set-Aside under NAICS code 331222. Interested parties must submit their responses by October 15, 2026. The primary objective is the delivery of forged or cast blanks that are prepared for subsequent precision machining.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

in about 3 hours

Aerospace Casting and Forging (Tube Components)This subcontract opportunity, titled Aerospace Casting and Forging (Tube Components), is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project involves the production and delivery of raw cast or forged metal blanks and associated tooling for prime contractors, strictly adhering to DLA manufacturing guidance and the provided Technical Data Package. Performance for this contract is centered at Robins Air Force Base. Prospective bidders must hold JCP Certification and maintain ITAR compliance to gain access to the controlled technical data required for the project. The solicitation was posted on October 7, 2026, with a response deadline of October 15, 2026. The work falls under NAICS code 331222, focusing on the specialized manufacturing of metal components for aerospace applications.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 3 hours

S22759 Series Wire SupplyThis subcontract involves the supply of S22759 series high-reliability, military-grade wire for prime contractors supporting Navsup Weapon Systems Support projects under the Department of Defense. The primary objective is to provide certified wire to a repair facility for the modification and repair of television cameras, specifically serving as the mandated replacement for MIL-W-81381 wire as outlined in the Statement of Work. All delivered materials must strictly comply with established military wire specifications. The opportunity is categorized under NAICS code 331222, with a response deadline set for October 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Special Emphasis Nickel-Copper Alloy Bar Manufacturing/SupplyThis subcontract involves the manufacture and supply of high-criticality nickel-copper alloy metal bars for prime contractors supporting NAVSUP Weapon Systems Support Mech shipboard projects. The materials must be produced in accordance with QQ-N-281 and ASTM B164 standards, with a strict requirement for mercury-free material. For orders consisting of fewer than five pieces, the supplier must ensure single heat sourcing. Compliance is mandatory regarding traceability per MIL-STD-792 and packaging per MIL-STD-2073. The selected provider must hold either ISO-9001 or MIL-I-45208 certification. Deliverables include the physical metal bars and all required certification data CDRLs. The response deadline for this opportunity is October 21, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

BAG, THROW, WATER RESCUE

Solicitation # SPE8E6-27-T-0148

Solicitation SPE8E6-27-T-0148 is a Request for Quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment for the procurement of one water rescue throw bag, specifically Skedco Inc part number SK-1001-OD and NSN 4240-01-518-6458. The requirement is categorized under NAICS 331222. Quotations are due by close of business on October 19, 2026, with an original required delivery date of October 1, 2026. Delivery is required within 20 days after order, shipped FOB Origin to the Army SSA Warehouse in Golden, Colorado. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, with DLA Master List technical requirements taking precedence. Palletization must follow RP001 guidelines. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment requests. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and NIST SP 800-171 assessment requirements for safeguarding covered defense information.

Defense Logistics Agency

POSTED

DEADLINE

High-Purity AM 350 Stainless Steel Powder SupplyThis subcontract, managed by the NASA SBIR/STTR Program, involves the supply of high-purity, aerospace-grade AM 350 stainless steel powder. The material is intended for the additive manufacturing of critical ADLI components and must adhere to rigorous chemical and particle size specifications to ensure flight-grade quality. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 331222, specifically targeting firms with fewer than 500 employees. Performance for this contract will take place at the Kennedy Space Center in Florida.

NASA SBIR/STTR Program

POSTED

about 2 months ago

DEADLINE

Domestic Source Material Supply (Specialty Steel/Wire)This subcontract with the Defense Logistics Agency under the Department of Defense involves the supply of domestically sourced specialty steel wire. The materials must strictly comply with the Buy American Act and the Berry Amendment to ensure they are suitable for use in the manufacturing of military springs. The contract is categorized under NAICS code 331222 and was posted on August 11, 2026. It focuses on maintaining a secure domestic supply chain for critical specialty steel components required for defense applications.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

Hydraulic Line Guard ManufacturingThis subcontract involves the manufacture and supply of hydraulic line guards for the M109 Tank, supporting prime contractors under the DLA Weapons Support Land Supply Chain. The selected provider must fabricate metal guards in strict accordance with NSN 2520-00-194-2448 and the DLA Master List of Technical and Quality Requirements, ensuring all finished products are packaged according to RP001 standards. Due to the nature of the defense work, the contractor is required to maintain CMMC Level 2 certification and full ITAR and EAR compliance. The opportunity is categorized under NAICS code 332312, with a response deadline set for October 26, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Brake Chamber Housing AssembliesThis subcontract involves the procurement of 19 Brake Chamber Housing Assemblies for prime contractors supporting the DLA Weapons Support Land Supply Chain. The required items must be sourced or manufactured according to Meritor Heavy Vehicle Systems part number A-3280-E-6817. Strict adherence to Critical Application Item standards is mandatory, and the use of additive manufacturing is explicitly prohibited for these components. All deliverables must be packaged and marked in accordance with MIL-STD-129 and MIL-STD-2073-1E standards. The contract falls under NAICS code 336390 and is managed through the Department of Defense. Interested parties must respond by the deadline of October 26, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 21 hours ago

DEADLINE

Military-Grade Packaging and ShippingThis subcontract for Military-Grade Packaging and Shipping supports prime contractors on projects for the DLA Weapons Support Land Supply Chain under the Department of Defense. The scope of work involves the specialized packaging and preparation of hardware components to ensure they are shipment-ready and compliant with DoD shipping standards for FOB Origin delivery. All work must strictly adhere to MIL-STD-2073-1E, utilizing specific cushioning, dunnage, and containers as defined by QUP .001 and Pres Mthd .10. The opportunity is categorized under NAICS code 488510, with a response deadline set for October 26, 2026.

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

Manufacturing of Oil Cooler HousingsThis subcontract involves the manufacture of four oil cooler housings for Detroit Diesel 6V-53 engines, specifically part number 5133532. The work supports prime contractors under the DLA Weapons Support Land Supply Chain and requires precision machining in strict accordance with the DLA Master List of Technical and Quality Requirements RA001. The contractor must adhere to specific regulatory constraints, including the prohibition of additive manufacturing without prior authorization and compliance with RQ011 regarding the removal of government identification. The project falls under NAICS code 332710 and is managed through the Department of Defense.

POSTED

about 21 hours ago

DEADLINE

Supply of Identification Markers (NSN 7690-01-107-2605)This subcontract involves the supply of identification markers, specifically NSN 7690-01-107-2605 (Part Number 62556AX), to support prime contractors under the DLA Weapons Support Land Supply Chain. The provided markers must adhere to TYPE I (CODE M) specifications, ensuring a minimum shelf-life of 24 months. The contractor is responsible for the complete delivery of the markers, which includes professional packaging and marking in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. This requirement falls under NAICS code 339999 and is managed by the Department of Defense.

All Other Miscellaneous Manufacturing

POSTED

about 21 hours ago

DEADLINE

Military-Standard Packaging and LogisticsThis subcontract involves providing specialized military-standard packaging and marking services for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider must possess deep expertise in DLA packaging requirements to ensure all items are processed according to MIL-STD-2073-1E for packing and MIL-STD-129 for marking. Additionally, the scope includes palletizing shipments per RP001 using specific ASTM D5118/D5118M containers and ASTM D1974/D1974M closures. The final deliverables consist of fully packaged shipments ready for delivery to DLA Distribution in New Cumberland. This opportunity falls under NAICS code 561910 and is managed under the Department of Defense. Interested parties should note the response deadline of October 26, 2026.

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Supply of Qualified Components (QPL/QML)This subcontract involves the supply of qualified sub-components for prime contractors supporting DLA Weapons Support Land Supply Chain projects. The selected provider must deliver certified components that adhere to QPL-3150-34 or other Technical Data Package specifications, ensuring all parts are sourced from qualified manufacturers. A critical requirement for eligibility is maintaining an active status on the applicable Qualified Products List or Qualified Manufacturers List. The opportunity is managed by the Department of Defense under NAICS code 332994, with performance located in New Cumberland. Interested parties must submit their responses by October 26, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 21 hours ago

DEADLINE

Phosphate Coating and Surface FinishingThis subcontract involves providing phosphate coating and surface finishing services for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected contractor will utilize industrial plating tanks to apply phosphate coatings to rod components in strict accordance with the technical data package to ensure corrosion prevention and adherence to military specifications. Performance of these services will take place in New Cumberland. To be eligible for this requirement, the contractor must obtain approval from the PCO as the designated Phosphate Contractor and maintain CMMC Level 2 certification. The project falls under NAICS code 332813 and is managed by the Department of Defense. Interested parties must submit their responses by October 26, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 21 hours ago

DEADLINE

Precision Machining and Assembly of Gun Operating RodsThis subcontract involves the precision fabrication, machining, and assembly of 47,000 Gun Operating Rod Assemblies for the DLA Weapons Support Land Supply Chain. The work must be performed in accordance with TDP Rev A Gen 1 and Drawing NR 19200 11826072, adhering strictly to MIL-W-13855 and MIL-DTL-16232H(1) standards. Due to the requirement for tight tolerances, CNC machining is mandatory for production. Eligible contractors must hold CMMC Level 2 and JCP certifications to qualify for this project. The performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 26, 2026, for this Department of Defense initiative under NAICS code 332710.

POSTED

about 21 hours ago

DEADLINE

Supply of Filter Element, INTA (NSN 2940-01-681-5158)This subcontract involves the manufacture or procurement of industrial filter elements specifically meeting NSN 2940-01-681-5158 specifications to support prime contractors for the DLA Weapons Support Land Supply Chain. The selected provider must ensure all items are packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129, while maintaining strict compliance with the 29 CFR 1910.1200 Hazard Communication Standard. The final products are to be delivered FOB Origin to Ft Riley, Kansas. This opportunity falls under NAICS code 334418 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of October 26, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Turbocharger Case and Nozzle Turbine (P/N 5199055)This subcontract involves the manufacture or procurement of three Turbocharger Case and Nozzle Turbine components, specifically part number 5199055, for the DLA Weapons Support Land Supply Chain. The contractor must ensure all items adhere to RA001 and RP001 standards and are completely free of mercury in accordance with NAVSEA 5100-003D. The agreement requires strict adherence to military specifications for logistics, including packaging per MIL-STD-2073-1E and marking per MIL-STD-129. These critical application items are intended for prime contractors supporting the Department of Defense under NAICS code 336412.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Protective Plugs (NSN 5340015186545)This subcontract involves the manufacture or sourcing of 2,000 protective plugs for prime contractors supporting the DLA Weapons Support Land Supply Chain. The components must strictly adhere to NSN 5340015186545 and Dixon Valve & Coupling P/N 600-DP-ALH specifications. All deliverables must be packaged according to ASTM D3951 and labeled in compliance with MIL-STD-129. The project is managed under NAICS code 332999 with performance taking place in Jacksonville, Florida. A critical restriction is placed on production methods, as additive manufacturing is prohibited unless explicit approval is granted by the ESA. The response deadline for this requirement is October 26, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS