This Solicitation opportunity from Government of Canada was posted on June 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Aviation Replacement Parts for the CC-138

Closed

W8485-279456/ACanada

Submission Closed06/11/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

DIBBS

SKIN, AIRCRAFTThis contract pertains to the procurement of 32 aircraft skins with NSN 1560-01-729-7386 under solicitation SPE4A7-26-Q-0647, with a delivery requirement of 250 days after award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The supplier must be a Cybersecurity Maturity Model Certification Level 2 certified Third-Party Assessment Organization and comply with all documentation requirements for source approval requests. Covered Defense Information is applicable, and the item is subject to export control under ITAR or EAR, requiring prior authorization for any disclosure or transfer to foreign persons, including foreign nationals within the U.S. or overseas. Access to controlled technical data is restricted to contractors holding a valid US/Canada Joint Certification Program credential, having completed mandatory DOD export control training, and been formally approved by DLA. Packaging must adhere to DLA specifications, and quality requirements include tailored higher-level standards, inspection and acceptance at origin, proper physical identification and marking of items, removal of government identification from non-accepted supplies, and formal engineering change proposal procedures for any deviations. All technical data associated with this item is protected under DFARS 252.225-7048, and strict controls are enforced on its handling and distribution.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

CONNECTOR, ROD END, AThe contract is for the procurement of 72 units of Connector, Rod End, A, with NSN 1640-01-656-6102 and part number 721-011, under solicitation SPE4A6-26-T-05PW. Delivery is required within 85 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The unit price is $72.00 per unit, resulting in a total contract value of $5,184.00. The item is designated as a Critical Application Item and must comply with FAA Airworthiness requirements, though Unique Identification is not mandated per customer request. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and must adhere to current revisions effective on the solicitation or award date depending on acquisition size. The product must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, using packaging code U and preservation method 10, with no special marking required. Palletization follows DLA packaging guidelines, and supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, as the item is subject to Federal Aviation Administration airworthiness certification criteria. Sampling procedures must conform to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required for acceptance unless otherwise stipulated. Attributes are to be classified with specified verification levels or AQLs, and unspecified features default to major status. All items must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of December 7, 2025, and an original delivery deadline of April 8, 2026. The contract prohibits quantity variance, and transportation logistics are governed by DLA Procurement Notes C19 and C20.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

FITTING, TRIPODThe contract pertains to the procurement of a single Fitting, Tripod, identified by NSN 1560-00-346-2367 and part number 212-061-105-1, under solicitation SPE4AC-26-T-0070, issued by the Department of Defense’s CCAD Detachment. Delivery is required within 20 days of award, with shipment originating from the supplier and delivered FOB origin to Eglin AFB, Florida, under strict zero variance tolerance on quantity. Inspection and acceptance occur at the destination, and packaging must adhere to DLA’s master requirements, including MIL-STD-129 for marking and labeling, with ASTM D3951 or FED-STD-313 compliance based on hazardous material status—all superseded by DLA’s technical and quality standards. The item may require casting or forging, and suppliers must request tooling or material support through DLA’s designated channels if government-provided resources are unavailable. The contract mandates zero-defect sampling under MIL-STD-1916 or ASQ H1331, with inspection levels and AQLs defined for critical, major, and minor attributes, and permits only zero non-conformances unless otherwise stated. Cybersecurity requirements include a CMMC Level 2 self-assessment, and all items must be physically marked in accordance with RQ017. Shipping must utilize traceable freight methods, explicitly excluding parcel post, with freight address and government identifiers specified for logistics coordination. The unit of issue is each, priced at a fixed total, and the required delivery date is May 19, 2026. All technical, quality, and packaging requirements referenced through R-numbers are governed by the DLA Master List of Technical and Quality Requirements effective on the solicitation issue date.

POSTED

DEADLINE

ELECTRONIC COMPONENThis contract pertains to the procurement of 34 units of electronic components identified by NSN 5998-01-285-9174 under solicitation SPE7M1-26-T-208E, with a delivery requirement of 546 days after delivery order. The solicitation was posted on July 13, 2026, and responses are due by July 24, 2026. Technical and quality requirements are controlled by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract incorporates stringent cybersecurity and export control mandates, requiring CMMC Level 2 certification by a C3PAO and strict adherence to ITAR or EAR regulations due to the presence of controlled technical data. Any disclosure of this data to foreign persons, including foreign nationals within the U.S. or overseas, requires prior government authorization. Access to export-controlled technical data is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD training on export-controlled data handling, and DLA approval. Packaging must meet DLA specifications, and any configuration changes require formal engineering change proposals. Government identification must be removed from non-accepted supplies, and deviations or waivers must be formally requested. The place of performance is New Cumberland, Pennsylvania, with Ryan Snyder of the Department of Defense's Maritime Supply Chain as the point of contact.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

STRINGER, ZEEThe contract pertains to the procurement of 57 units of STRINGER, ZEE with NSN/Part Number 1560-01-078-9959 under solicitation SPE4A7-26-T-566Q, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 148 days from award, and the place of performance is Tinker AFB, 73145-8000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on acquisition size. The item is subject to stringent documentation controls including Source Approval Request requirements, DLA packaging standards, and CMMC Level 2 certification for third-party assessors. Configuration changes require formal Engineering Change Proposal requests, and inspection and acceptance must occur at the origin. Export control applies to associated technical data under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal authorization. The item is exempt from Item Unique Identification as per customer request, and government identification must be removed from non-accepted supplies. Technical data and engineering exceptions are incorporated via referenced drawings and documents.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days

AI Contract Overview

The Department of National Defence is seeking aviation replacement parts for the CC-138 Twin Otter under solicitation W8485-279456/A, open exclusively to qualified holders of Supply Arrangement W8485-184741 Series. A select list of suppliers, including Aero Precision Industries, Honeywell Ltd, Rockwell Collins Canada, StandardAero Atlantic Inc., and others, have been directly invited to submit proposals; participation is restricted to those already qualified under the supply arrangement. The requirement is for six specific items critical to the maintenance and operational readiness of the CC-138 fleet, and all solicitation documents will be distributed directly by the Contracting Officer via email, with no reliance on the Government Electronic Tendering Service. Proposals must be submitted by June 11, 2026, at 14:00 Eastern Time, and all inquiries should be directed to Ivan Khanzadeev at the Aerospace Equipment Program Management office in Gatineau. This procurement is part of an ongoing framework that allows for annual opportunities for new suppliers to qualify for the W8485-184741 Series supply arrangement, ensuring continued competition and access to qualified vendors. Suppliers wishing to join the pool of eligible providers must submit requests to Megan McCandless at Public Services and Procurement Canada. The procurement falls under NAICS code 336413, indicating its focus on aircraft parts and equipment manufacturing, and is managed under the Government of Canada’s federal acquisition protocols with performance expected to support Defence operations nationally. The process emphasizes strict eligibility, direct communication with the contracting authority, and long-term supply chain stability for essential aviation components.

General Info

DND seeks qualified suppliers to bid on six CC-138 Twin Otter aircraft replacement parts by June 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJun 11

Solicitation

Response DeadlineJun 11

Deadline has passed

Submission Closed

06/11/2026, 02:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

Contacts

Ivan KhanzadeevPoint of Contact

contact@example.gov

Full Description

Notice of Proposed Procurement (NPP) Department of National Defence Supply Arrangement - W8485-184741 Series - Aviation Replacement Parts Solicitation: W8485-279456/A This requirement is to acquire 6 items for the CC-138 Twin Otter for the Department of National Defence (DND), Directorate of Aerospace Procurement (DAP) 4. This Request for proposal (RFP) is open only to Qualified Supply Arrangement (SA) Holders of Supply Arrangement W8485-184741 series. The following companies have been invited to submit a proposal: Aero Precision Industries LLC B S F (Business Solutions Fasteners) International Inc. JHT Defense Inc. Mills/Sterling Aerospace Inc. Patlon Aircraft & Industries Limited Simex Defence Inc. Tower Aerospace Inc. Genaire Limited Unisource Technology Inc. StandardAero Atlantic Inc. L3 Technologies MAS Inc. Tronosjet Maintenance Inc. Tulmar Safety Canada West Avionics Honeywell Ltd M1 Composites Technology Rockwell Collins Canada TSL Aerospace Technologies PAL Aerospace Kenn Borek Air AllClear Aerospace and Defence Inc. CASP Bristow Avmax Aviation Services Inc. CanaG and Z The RFP documents will be e-mailed directly by the Contracting officer to the Qualified SA Holders who are being invited to bid on this requirement. Bidders are advised that Government Electronics Tendering System (GETS) is not responsible for the distribution of the RFP documents. Inquiries regarding this RFP requirement are to be submitted to the Contracting Authority listed below: Aerospace Equipment Program Management (DGAEPM) Department of National Defence (DND) / Government of Canada 455, Boulvard de la carrière, Gatineau (QC) J8Y 6V7 Tel: N/A Ivan.Khanzadeev@forces.gc.ca NOTE: On-going Opportunity for Qualification A Notice will be posted at least once a year on the Government Electronic Tendering Service (GETS) to allow more Suppliers to become qualified for Supply Arrangement W8485-184741 Series. Please submit your request to the Supply Arrangement Authority below: Megan McCandless, Supply Team Leader Government of Canada | Public Services and Procurement Canada Land and Aerospace Equipment Procurement and Support Sector Civilian Aircraft Division - CAG Email: megan.mccandless@tpsgc-pwgsc.gc.ca