Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Aviation Wire Rope Assembly Fabrication

Active

Federal

Response Deadline10/15/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication of three single-leg aviation wire rope assemblies for prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier Oper AE and AF Div. The work must be performed at Tinker AFB and requires strict adherence to drawing 13873 015299985-17214 as well as NAS302 through NAS310 standards. All delivered assemblies must be properly marked and packaged. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 quality systems and hold CMMC Level 2 certification. Additionally, JCP certification is mandatory for the handling of ITAR and EAR data. The solicitation was posted on October 7, 2026, with a response deadline of October 15, 2026, under NAICS code 336413.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-0229.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WIRE ROPE ASSEMBLY, SIN

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 7

subcontract

Response DeadlineOct 15

Submission deadline

Response Deadline

10/15/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures single-leg aviation wire rope assemblies for prime contractors on DLA Weapons Support projects. Fabricates assemblies per drawing 13873 015299985-17214 and NAS302 through NAS310 standards. Requires SAE AS9003 or ISO 9001 quality systems and CMMC Level 2 certification. Must be JCP certified for ITAR/EAR data. Delivers three completed, marked, and packaged wire rope assemblies.

Similar Contracts

Same NAICS industry code

Supply of Aerospace Part (NSN 7690-01-730-8970)This subcontract involves the supply of one unit of a specialized aerospace component, identified by NSN 7690-01-730-8970, to support prime contractors delivering Defense Logistics Agency supply contracts to Tinker AFB. The required hardware must be either part number OX43903-13 from Oxley Inc or S842-349902-13 from Boeing. The provider must ensure strict adherence to military standards, specifically MIL-STD-129 for shelf life marking and MIL-STD-2073-1E and RP001 for packaging. Additionally, the contract mandates full compliance with Buy American regulations and the proper safeguarding of covered defense information.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Precision Machining and Assembly of Bracket Assembly (P/N L24017G01)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

Supply of Aerospace-Grade Raw Materials for Bushing AssembliesThis subcontract involves the supply of aerospace-grade raw metals and alloys to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the provision of raw stock that strictly adheres to the chemical and physical properties specified in Drawing 9681M48. To ensure quality and traceability, the supplier must provide Mill Test Reports detailing the origin and composition of all materials delivered to the manufacturer. The contract mandates full compliance with the Buy American Act and the Berry Amendment. Performance for this requirement is centered in San Diego, California, under NAICS code 336413. Interested parties must adhere to the response deadline of October 15, 2026, to provide certified raw material stock for bushing assemblies.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Specialized Aviation Check Valve Supply

DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

Manufacture of Aircraft Access Covers (NSN 1560-01-420-9453)This subcontract involves the manufacture of 140 aircraft access covers for prime contractors supporting DLA Weapons Support ASC projects. All parts must be fabricated in strict accordance with Reference Drawing NR 81755 16VK057 and TDP Rev B Gen 2. The final deliverables include the 140 finished covers and a First Article Test sample, with performance taking place in San Diego. The contractor must adhere to stringent regulatory and quality standards, including compliance with the Berry Amendment and the Buy American Act for all materials. Required certifications include ISO 9001:2015 and AS9100, as well as US/Canada Joint Certification Program certification to handle ITAR data. This procurement falls under NAICS code 336413 for the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Precision Fabrication of Door Extension Hand (NSN 1560-01-614-3158)This subcontract involves the precision fabrication of Door Extension Hand components under NSN 1560-01-614-3158 for the Department of Defense, specifically supporting the DLA Weapons Support ASC. The manufacturer is responsible for producing parts that adhere to strict technical specifications using precision machining and sampling methods in accordance with MIL-STD-1916 or ASQ H1331. All finished components must be delivered following RP001 packaging requirements. To qualify for this project, the contractor must maintain JCP certification to ensure authorized access to ITAR and EAR data, as well as maintain cybersecurity compliance per DFARS 252.204-7012. The opportunity is categorized under NAICS code 336413, with a response deadline set for October 22, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Manufacture of Aileron Counter Balance Shields

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Raw Material Supply for Shoulder ShaftsThis subcontract involves the supply of certified raw metal stock for shoulder shafts to support prime contractors on DLA Weapons Support Land Supply Chain projects. The provider is responsible for sourcing alloy steel in strict accordance with Drawing NR 53711 8197431 and must deliver all materials along with required Material Test Reports and Certificates of Conformance. Compliance is mandatory regarding the Buy American Act, the Berry Amendment, and DFARS specialty metals requirements. The performance of this contract is centered in Dublin, California, with a response deadline set for October 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Aviation-Grade Wire Rope SupplyThis subcontract involves the supply of raw aviation-grade wire rope and hardware to prime contractors supporting DLA Weapons Support projects. The materials must strictly adhere to drawing 13873 015299985-17214 and NAS302-NAS310 specifications, with components sourced from QPL or QML providers in accordance with RQ016. All deliveries must include certified raw materials accompanied by Mill Test Reports to ensure quality and traceability. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract requires full compliance with the Buy American Act and the Berry Amendment. Performance for this requirement is centered at Tinker AFB. The solicitation was posted on October 7, 2026, with a response deadline of October 15, 2026, falling under NAICS code 336413.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Manufacturing of Attachment Flanges for Molded TanksThis subcontract involves the manufacture of five attachment flanges for molded tanks to support DLA Weapons Support ASC projects. The contractor is responsible for fabricating components according to NSN 1560015578431 using molding or precision machining, though additive manufacturing is strictly prohibited. All deliverables must undergo physical marking per RQ017 and quality control inspections using calibrated M&TE in accordance with RT001. The project is managed by the Department of Defense under NAICS code 336413, with performance taking place at Tinker AFB. To be eligible, the contractor must maintain CMMC Level 2 certification and provide the required SAR documentation. Responses to this solicitation are due by October 15, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

MOULAGE, WAR WOUND

Solicitation # SPE2DH-27-T-0123

Solicitation SPE2DH-27-T-0123, issued by the DLA Troop Support Medical Supply Chain, is a request for quotations for ten units of war wound moulage (NSN 6910-01-694-7005). The required items are three-dimensional, wearable simulation wounds designed for Tactical Combat Casualty Care training. Specifically, the procurement calls for a sucking chest wound with an exit back, integrated into a short-sleeve shirt with a medium skin tone. These simulation wounds must be durable, water-resistant, and anatomically correct to provide realistic tactile and visual feedback while accepting real medical interventions on either human models or manikins. The contract specifies a delivery lead time of 20 days after order, with the final destination for inspection and acceptance being the 88th MDSS SGSL-MM at Wright Patterson AFB, Ohio. Shipping must be conducted via traceable means in commercial exterior containers, adhering to MIL-STD-129 and Hazard Communication Standard 29 CFR 1910.1200 for any hazardous materials. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The procurement is governed by various FAR and DFARS clauses, including fixed-price supply regulations, the Buy American Act, and specific cybersecurity standards for safeguarding covered defense information.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 11 hours ago

DEADLINE

ADAPTER, TAIL ROTOR CON

Solicitation # SPE4A7-27-T-0235

Solicitation SPE4A7-27-T-0235 is a fixed-price procurement issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the acquisition of seven Tail Rotor Control Adapters, identified by NSN 1560-00-915-6876. The manufacturing process requires metal casting and specific tooling, with deliverables subject to ITAR or EAR export controls. The contract specifies a delivery timeline of 789 days after order, with shipping handled under the First Destination Transportation program and FOB Origin terms. Delivery is destined for DLA Distribution San Diego. The contractor must adhere to strict quality and documentation standards, including a manufacturer inspection system compliant with SAE AS9003 or ISO 9001. Key requirements include the submission of a Production Lot Test report to the Quality Assurance Representative and the provision of comprehensive documentation such as DD Form 1222, DD Form 250/iRAPT, and material certifications with all shipments. Inspection and acceptance will occur at the origin per FAR 52.246-2. Packaging must comply with MIL-STD-129 and ASTM D3951, with specific hazardous material protocols if applicable. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and DFARS cybersecurity standards.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

First Article Testing and Inspection ServicesThis subcontract for First Article Testing and Inspection Services supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected contractor will perform First Article Testing for prime contractors, specifically conducting validation testing on one unit of NSN 1670-01-441-8630. This process requires the use of precision measurement equipment and CMM, with close coordination alongside Government Quality Assurance Representatives. The project is based in Tracy, California, under NAICS code 541380. A primary deliverable is a comprehensive First Article Test Report, which must be submitted within 60 days. The solicitation was posted on October 7, 2026, with a response deadline of October 15, 2026.

Testing Laboratories and Services

POSTED

about 11 hours ago

DEADLINE

Supply of Aerospace-Grade Raw Materials for Cargo RailsThis subcontract involves the supply of certified aerospace-grade raw materials, specifically billets, bars, or extrusions, to support prime contractors on DLA Weapons Support ASC projects for cargo rails. All materials must strictly adhere to the specifications outlined in TDP DTID 07P5G1504 and comply with DFARS specialty metals clauses. To ensure quality and regulatory adherence, the provider must deliver full material traceability and comprehensive Mill Test Reports. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division, with the place of performance located in Tracy, California. Operating under NAICS code 331210, the procurement process requires responses by October 15, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 11 hours ago

DEADLINE

Precision Machining of Aircraft Cargo Rail AssembliesThis subcontract involves the precision machining, milling, and turning of five aircraft cargo rail assemblies for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The contractor must fabricate all components according to TDP DTID 07P5G1504 Rev C, with a strict prohibition on the use of additive manufacturing. Performance of the work will take place in Tracy, California. To be eligible, the provider must maintain SAE AS9003 or ISO 9001 quality systems and demonstrate CMMC Level 2 compliance. The project falls under NAICS code 332710, with a response deadline set for October 15, 2026.

POSTED

about 11 hours ago

DEADLINE

MIL-SPEC Packaging and Distribution ServicesThis subcontract for MIL-SPEC Packaging and Distribution Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves specialized military packaging, labeling, and shipping, with strict adherence to MIL-STD-2073-1E for packaging data and MIL-STD-129 for marking and labeling requirements. The provider must utilize industrial labeling systems and MIL-SPEC materials to ensure all shipments are preserved, wrapped, and ready for destination acceptance under FOB Destination delivery logistics. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 561910 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. Interested parties must note the response deadline of October 21, 2026.

Packaging and Labeling Services

POSTED

about 11 hours ago

DEADLINE

Manufacturing of Double Key Washers (NSN 5310-01-315-6189)This subcontract opportunity is for the manufacture and supply of Double Key Washers (NSN 5310-01-315-6189) to support prime contractors on DLA Weapons Support ASC projects. The selected provider must fabricate washers to exact military specifications, utilizing precision machining equipment and materials that comply with the Buy American and Balance of Payments Program. Quality control requirements include the execution of zero-nonconformance sampling plans and adherence to MIL-STD-2073-1E Preservation Method 10 for cleaning and drying, with final packaging conducted per MIL-STD-129. The contract is designated as a Total Small Business Set-Aside under NAICS code 332721 for the Department of Defense. Due to the nature of the work, the supplier must maintain CMMC Level 2 certification and ensure full ITAR and EAR compliance. Interested parties must submit their responses by October 21, 2026.

Precision Turned Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

Precision Machining and Finishing of Tail Rotor Control AdaptersThis subcontract involves the precision machining and finishing of seven Tail Rotor Control Adapters for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The selected contractor will be responsible for machining cast blanks to final dimensions using CNC milling and turning, executing Production Lot Tests, and ensuring all items are packaged according to MIL-STD-129 and ASTM D3951 standards. Final deliverables include the finished adapters and completed DD Form 1222 documentation. To be eligible, contractors must maintain ITAR or EAR compliance and hold either SAE AS9003 or ISO 9001 certification. The work is categorized under NAICS code 332710 and will be performed in San Diego, California. Interested parties must respond by October 15, 2026.

POSTED

about 11 hours ago

DEADLINE

Metal Casting and Tooling for Tail Rotor Control AdaptersThis subcontract involves the provision of raw cast components and production tooling for Tail Rotor Control Adapters under the DLA Weapons Support ASC. The selected supplier will be responsible for performing metal casting to create base form adapter blanks and maintaining the necessary manufacturing tooling to support prime contractors. Performance of this contract will take place in San Diego, California. To be eligible, contractors must maintain a quality system compliant with ISO 9001 or SAE AS9003 and ensure full compliance with ITAR or EAR regulations. The opportunity was posted on October 7, 2026, with a response deadline of October 15, 2026. This requirement falls under NAICS code 331511 and is managed by the Department of Defense.

POSTED

about 11 hours ago

DEADLINE

MIL-SPEC Kit Packaging and PreservationThis subcontract for MIL-SPEC Kit Packaging and Preservation supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing specialized cushioning and containers, specifically utilizing MAT:49 and WRAP MAT:GBC materials with Unit Cont: D3 and Intrmdte Cont: E5 specifications. All deliverables must be certified MIL-SPEC packaging materials and labeled shipping containers that adhere to strict military standards, including marking per MIL-STD-129, preservation per MIL-STD-2073-1 Appendix D, and palletization per RP001. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the project is categorized under NAICS code 333613. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 15, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Aircraft Tool Kit Component FabricationThe Aircraft Tool Kit Component Fabrication subcontract involves the manufacture of precision tools and components for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires fabrication according to Technical Data Package Rev A Gen 3 and Basic Drawing NR 81996 1078972-601 Rev 01. All precision machining and quality assurance sampling must adhere to MIL-STD-1916 or ASQ H1331 standards to ensure all delivered tools meet strict TDP specifications. This Department of Defense project, managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, is categorized under NAICS code 333318. Performance will take place in New Cumberland. Due to the nature of the components, the contractor must maintain strict ITAR/EAR compliance and meet NIST SP 800-171 cybersecurity standards. The solicitation was posted on October 7, 2026, with a response deadline of October 15, 2026.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 11 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services involves providing specialized logistics support for prime contractors fulfilling DLA supply contracts. The scope of work includes packaging hardware according to ASTM D3951, marking shipments per MIL-STD-129, and palletizing materials in accordance with RP001 and the DLA Master List of Technical and Quality Requirements. All operations must utilize MIL-SPEC packaging materials and standardized marking systems to ensure shipments are ready for transport to DLA Dist San Joaquin. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in Tracy, California. The opportunity is categorized under NAICS code 493110. Interested parties must note the response deadline of October 15, 2026.

General Warehousing and Storage

POSTED

about 11 hours ago

DEADLINE

Supply of Commercial Off-The-Shelf (COTS) Eye BoltsThis subcontract involves the supply of 186 commercial off-the-shelf eye bolts to support prime contractors delivering on Department of Defense contracts for the DLA Weapons Support ASC Supplier OE and AF Div. The required hardware must match NSN 5306012324466, specifically citing Chicago Hardware and Fixture part number MC11549 or McMaster-Carr Supply Co part number 9490T4. All provided materials must strictly adhere to domestic sourcing restrictions mandated by the Buy American Act and the Berry Amendment. The contract specifies that the 186 units are to be delivered FOB Origin to DLA Dist San Joaquin located in Tracy, California. This procurement falls under NAICS code 332722, with a response deadline set for October 15, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Flexible Metal Conduit Assembly SupplierThis subcontract opportunity is for the supply of flexible metal conduit assemblies to prime contractors supporting the DLA Weapons Support ASC. The scope of work involves the manufacture or sourcing of part number 200AS349-040JH10041DA132, identified by NSN 5975-01-461-4452, for use in critical applications. Performance requirements include technical sampling conducted according to MIL-STD-1916 or ASQ H1331, with packaging adhering to ASTM D3951 and MIL-STD-129 standards. The contract is issued under NAICS code 335999 and requires the supplier to maintain a CMMC Level 2 self-assessment and ensure full compliance with the Buy American Act. The place of performance is located in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 15, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 11 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS