Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Award Lapel Button Manufacturing

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the full-cycle manufacturing of government-issued lapel buttons for the Defense Logistics Agency under the Department of Defense. It encompasses all stages of production including design finalization, stamping, plating, enamel filling, polishing, and rigorous inspection to ensure compliance with federal durability and packaging standards. The work must adhere to strict quality controls to meet the operational and aesthetic requirements of official military and government wear. The solicitation is categorized as a subcontract under NAICS code 339993, which corresponds to other miscellaneous fabricated metal product manufacturing. The contract was posted on July 17, 2026, and is linked to award number SPE1C124V0569. While specific delivery locations and point of contact information are not provided, the place of performance and organizational address details remain unspecified, implying flexibility in manufacturing facilities so long as final products meet mandated federal specifications. All deliverables must be properly packaged and documented to ensure traceability and readiness for distribution across federal installations.

General Info

Manufacture government lapel buttons per DOD specs, meet federal quality and packaging standards.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

339993 - Fastener, Button, Needle, and Pin ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Full-cycle production of government-issued lapel buttons including design finalization, stamping, plating, enamel filling, polishing, and inspection to meet federal durability and packaging standards.

Similar Contracts

Same NAICS industry code

LAPEL BUTTON, AWARDThe contract specifies the procurement of 1,000 civilian retired U.S. Army lapel buttons with NSN 8455-00-198-3753 under solicitation SPE1C1-26-Q-0373, issued by the Department of Defense through C and T Supply Chain. The item must be manufactured and packaged in strict compliance with MIL-L-11484, with each button mounted on a white Bristol board or equivalent card measuring approximately 1 3/4 inches square and sealed in chemically inert clear plastic to prevent damage to the metal finish. Air Force civilian lapel buttons are exempt and require individual packaging in a rigid hinged plastic box with a transparent lid and opaque bottom, secured on a polyethylene pad to restrict movement. One hundred individually packaged buttons are packed in an ASTM-grade cardboard intermediate box, and contractors may optionally group these into commercial shipping containers that provide adequate protection against corrosion, deterioration, or damage during transit. Marking must adhere to MIL-STD-129 and MIL-HDBK-129, including NSN, contractor CAGE code, nomenclature, packing date, contract number, and, for intermediate and shipping containers, contractor address, lot and shipment numbers, and delivery address, with bar-coding required for specified entries. Palletization is mandatory when economically feasible, using four-way winged pallets in accordance with MIL-HDBK-774. First article testing requires submission of five samples, with written notification of acceptance or rejection within thirty calendar days of receipt. Inspection and acceptance occur at the destination under FAR 52.246-2, and all packaging and handling must meet DLA packaging requirements. The contract is firm fixed price with zero variance allowed, delivery is due in 192 days after contract award, and the destination is Arizona Industries for the Blind in Phoenix, Arizona. The use of MIL-STD-105E is canceled; future applications should reference MIL-STD-1916 or ANSI/ASQ Z1.4, subject to evaluation for applicability.

C AND T SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Small Business Supplier for Government Contracts

Defense Logistics Agency

POSTED

DEADLINE

Supply of Neoprene Elbow Support Sleeves with Counter-Force StrapsThe contract requires the procurement and delivery of neoprene elbow support sleeves equipped with counter-force straps, specifically engineered to limit full extension of muscles and tendons in the elbow region. These medical devices must meet all applicable federal standards for medical equipment and hazardous material handling, ensuring safety, durability, and compliance with regulatory requirements. The item is intended for use within military medical settings, with performance and delivery obligations tied to Fort Bliss, Texas, where the equipment will be distributed and utilized. Subcontracted under the Department of Defense’s Medical Supply Chain, this solicitation falls under NAICS code 339993 for other medical equipment and supplies manufacturing. Posted on July 20, 2026, responses are due by July 27, 2026, and the opportunity is open to qualified subcontractors capable of meeting technical specifications and delivery timelines. All vendors must be prepared to furnish products that align with precise medical and safety criteria, as failure to comply may result in rejection or cancellation. The solicitation is accessible via the DIBBS portal and does not specify any set-aside category, meaning all eligible contractors may bid without restriction based on business size or ownership classification.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical Crutch Supply (Adjustable, Foldable)The contract is for the supply of eight adjustable, foldable medical crutches, each measuring 27 inches in length and rated to support up to 380 pounds, to be delivered under FOB terms. The items are designed for medical use and must meet specifications ensuring durability, adjustability, and portability for patient mobility needs. The solicitation is classified as a subcontract under NAICS code 339993 and is being managed by the Department of Defense through the MEDICAL SUPPLY CHAIN MD SURG FSF. Response proposals are due by July 27, 2026, with the request posted on July 20, 2026. Delivery location and point of contact details are not specified in the provided data, and no set-aside status is indicated. The procurement is accessible via the DIBBS platform using the provided link.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical Device Supply – Bone WireThe contract pertains to the supply of sterile bone wire intended for orthopedic surgical applications, requiring full compliance with federal medical device regulations to ensure safety, efficacy, and regulatory alignment. All products must adhere to strict packaging and labeling standards to maintain sterility and traceability throughout the supply chain, with clear identification of product specifications, lot numbers, expiration dates, and handling instructions. Delivery is mandatory to the Defense Logistics Agency, underscoring the critical nature of timely and accurate fulfillment within the Department of Defense medical supply framework. The solicitation is issued as a subcontract under NAICS code 339993, which classifies the manufacturing of other medical and dental instruments and supplies, and responses are due by July 27, 2026, with the opportunity posted on July 20, 2026. Failure to meet regulatory, packaging, or delivery requirements may result in rejection of the bid or contractual noncompliance.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Acupuncture Needle Manufacturing & SupplyThe contract calls for the manufacture and supply of sterile, disposable acupuncture needles specifications measuring 0.35x75mm with silver-plated bodies, spiral-wound handles, and stainless steel construction, packaged in boxes of 100 units each. All products must fully comply with the National Stock Number NSN 6515-01-673-6604 and adhere to the Department of Defense’s stringent shelf-life and packaging standards as mandated by the Defense Logistics Agency. The needles are intended for medical use and must meet exacting quality and sterility requirements to ensure safe deployment in military and federal healthcare settings. This is a subcontract opportunity managed by the Medical Supply Chain MD Surg FSF under the Department of Defense, with performance required at a designated location in San Antonio, Texas, zip code 78226. The solicitation was posted on July 19, 2026, with responses due by July 27, 2026. The North American Industry Classification System code 339993 applies, indicating the focus on other medical and dental equipment manufacturing. Bidders must be prepared to meet federal supply chain protocols, including documentation, traceability, and packaging compliance, and should access the official DIBBS portal for further bidding details.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Disposable Wooden Applicator SupplyThe contract requires the manufacture and supply of disposable, non-sterile, dust-free wooden applicators crafted from long-grain birchwood, ensuring a polished and uniformly finished product suitable for general medical applications. Each unit must meet exacting standards for consistency and quality, with delivery specified as two boxes containing 1,000 units each, destined for Dover Air Force Base, Delaware, with a zip code of 19902-7307. The solicitation falls under the NAICS code 339993, classifying it as a subcontract within the medical supply chain, and is managed by the Department of Defense through the MEDICAL SUPPLY CHAIN MD SURG FSF. The opportunity was posted on July 19, 2026, with a response deadline of July 27, 2026, indicating a limited window for submissions, and all proposals must be submitted through the DIBBS platform via the provided link.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Small Business or Socioeconomic Category Supplier ParticipationThe contract enables certified small, disadvantaged, women-owned, or veteran-owned businesses to participate as suppliers or subcontractors should future subcontracting goals be established by the Defense Logistics Agency under the Department of Defense. It is designated under NAICS code 339993, which corresponds to other miscellaneous manufacturing, and is structured as a subcontract opportunity without a specific set-aside designation. Interested businesses must hold the appropriate certifications to be eligible for consideration when subcontracting targets are formally set. The opportunity is accessible via the DIBBS portal with the contract number SPE1C124V0569, though no specific place of performance or point of contact details are provided. The posting date is July 17, 2026, indicating this is a future-facing opportunity intended to promote inclusive supplier participation across defense-related manufacturing activities.

Defense Logistics Agency

POSTED

DEADLINE

FASTENER TAPE, HOOKThe contract pertains to the procurement of 1,210 units of FASTENER TAPE, HOOK, identified by NSN 8315015635893 and part number 311336C91L, sourced from CAGE code 338X5 under solicitation SPE1C1-26-T-1536. The contract is a total small business set-aside under NAICS code 339993, with delivery required at the Travis Association for the Blind in Austin, Texas, FOB destination, within 106 days after order placement. The original delivery date is October 15, 2025, with zero variance allowed in quantity and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including clean/dry preservation, unit packaging in a box with an intermediate fiberboard container and no cushioning or preservation materials. Marking must conform to MIL-STD-129 with no special marking required, and palletization must adhere to DLA’s RP001 requirements. The contract mandates electronic invoicing via Wide Area WorkFlow and requires strict compliance with hazardous material labeling under OSHA’s Hazard Communication Standard and DFARS 252.223-7001, including pre-award submission of Safety Data Sheets. Cybersecurity and supply chain integrity are enforced through clauses requiring compliance with NIST SP 800-171 and prohibitions on restricted telecommunications equipment. All offerors must affirm their small business status and disclose UEI and CAGE codes if providing covered defense telecommunications equipment. The solicitation is electronically submitted via DIBBS by July 27, 2026, with payment and administrative details to be finalized post-award.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

BALL LOCK PIN, AIRCRThe contract solicits a commercial off-the-shelf ball lock pin, part number CL-8-BLPL-3.00-C, sourced from Carr Lane Manufacturing Company, under NSN 1680-01-562-2693, with a firm fixed price structure and zero variance in quantity. The delivery is set for 77 days after order direction, with FOB destination terms, meaning title and risk transfer upon arrival at the specified delivery point. The item is subject to stringent packaging and labeling requirements, primarily governed by MIL-STD-129 for shipping marks and barcoding, and ASTM D3951 for packaging standards, though any conflicting requirements from the DLA Master List of Technical and Quality Requirements supersede these. Palletization must adhere to RP001: DLA Packaging Requirements for Procurement, and all packaging must be properly marked and documented in accordance with government standards. The contract is structured as a Simplified Indefinite-Delivery Contract with a five-year base period and no options, with a maximum estimated value of $349,999.99 and a guaranteed minimum annual order of 30 units. All orders are subject to Defense Priorities and Allocations System (DPAS) rating, requiring the contractor to prioritize this contract over non-defense work. The solicitation is a total small business set-aside under NAICS code 339993, requiring offerors to self-certify as small businesses and maintain current representations in the System for Award Management. Key clauses include mandatory post-award small business re-representation, affirmative action and equal opportunity requirements, prohibitions on trafficking in persons and use of covered telecommunications equipment, and strict supply chain security rules under the Federal Acquisition Supply Chain Security Act. Contractors must comply with hazardous material labeling and Safety Data Sheet submission requirements under DFARS, and submit all invoices electronically via Wide Area WorkFlow. Inspection and acceptance occur at destination, with the government retaining rights to verify compliance through product verification testing and documentation review. The contract also includes provisions for termination for convenience and default, along with whistleblower protections and requirements to report executive compensation and subcontract awards. Offerors must submit bids electronically through DIBBS, adhering to electronic data interchange protocols, and are bound by representations regarding entity identification, CAGE codes, and compliance with all applicable federal regulations, including prohibitions on contracts with entities requiring internal confidentiality agreements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

PIN, SHOULDER, HEADLESSThe contract specifies the procurement of 42 units of PIN, SHOULDER, HEADLESS with NSN 5315-13-116-2594 under solicitation SPE4A6-26-T-07GQ, with a delivery requirement of 262 days after award, targeting delivery by April 13, 2027. Items are to be delivered FOB origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA. Packaging must adhere to MIL-STD-2073-1E, using packaging code U, with preservation method 31 (clean and dry), no preservation or cushioning materials, and bulk unit containers. Marking follows MIL-STD-129 with no special markings required, and bare item identification must comply with RQ017. Palletization conforms to DLA’s RP001 packaging requirements. Sampling for quality assurance must use MIL-STD-1916 or ASQ H1331 Table 1, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively; acceptance requires zero non-conformances unless otherwise specified. The contract incorporates technical and quality requirements from the DLA Master List, and includes cybersecurity compliance via CMMC Level 2 self-assessment and safeguarding of covered defense information as defined by RD002 and clause 252.204-7012. The contractor must provide Safety Data Sheets for any hazardous materials and comply with labeling requirements under 252.223-7001 and 29 CFR 1910.1200. Invoicing is mandatory through Wide Area WorkFlow with electronic submission of payment requests and receiving reports. The contract includes numerous FAR and DFARS clauses covering equal opportunity, subcontractor payments, cybersecurity, hazard communication, export controls, contractor information safeguards, whistleblower rights, and prohibitions on certain equipment and arbitration. The solicitation implies an automated award under a Lowest Price Technically Acceptable approach, though not explicitly stated. No unit price or estimated contract value is provided in Section B. The point of contact is Michael Jefferson of the ASC Commodities Division, and all submissions must be made through the DIBBS portal by the July 24, 2026 deadline.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

83--FASTENER TAPE,HOOKThe U.S. Department of Defense, through DLA Troop Support, is soliciting quotes for 1,210 units of FASTENER TAPE, HOOK with NSN 8315015635893, to be delivered to the TRAVIS ASSOCIATION FOR THE BLIND under a total small business set-aside. The solicitation, numbered SPE1C126T1536, is issued as a Request for Quote and must be submitted electronically by July 27, 2026, with no hard copies available. Only approved sources identified by the code 338X5 3113336C91L are eligible, and all responsible small businesses may respond provided they meet the submission requirements. No specifications, plans, or drawings are provided, and responses must comply with the timeline and format specified in the solicitation. The NAICS code is 339993, and all inquiries should be directed via email to the designated point of contact listed in the solicitation document. The procurement is managed from the Philadelphia, Pennsylvania office of DLA Troop Support with a performance location not specified. The solicitation is posted online via the SAM.gov platform and can only be accessed digitally through the provided link. Participation is restricted to small business concerns as defined by the SBA, and quotes must be received by the published deadline to be considered. The contracting officer and procurement details are accessible through the Additional Information link on the solicitation page, and potential offerors are advised to verify the complete terms before submitting.

DLA Troop Support

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

VALVE, CHECKA check valve with a 3.0 inch copper alloy body and flanged end connections, measuring 9.50 inches face to face nominal, is being procured under contract SPE7MC-26-T-144M by the Defense Logistics Agency. The item, identified by NSN 4820-01-272-7521 and part number 15-SW-F from William E Williams Valve Corp, is classified as a critical application item and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. The valve must not contain or come into direct contact with mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must be shock-proof and include a secondary containment barrier per NAVSEA 5100-003D. Two units are required with zero variance allowed, and delivery must be FOB destination within 20 days of contract award. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with marking per MIL-STD-129 and no special markings specified. Palletization and unit packaging must follow designated standards, and the shipment is destined for USNS YUKON T-AO 202 at FPO AP 96686. The original required delivery date is July 20, 2026, and the contract enforces strict compliance with government procurement protocols including transportation and handling instructions as outlined in DLAD PROC NOTES C19 and C20.

Industrial Valve Manufacturing

POSTED

about 9 hours ago

DEADLINE

PARTS KIT, SOLENOIDThe contract pertains to a Parts Kit, Solenoid with NSN 4810-01-508-9312, issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-144T. Two identical units are required, each priced at $1.00, with a total quantity of two units delivered FOB origin within 20 days of the order. All items must be packaged in compliance with ASTM D3951 and labeled according to MIL-STD-129, with DLA’s Master List of Technical and Quality Requirements taking absolute precedence over any other standards. Palletization must adhere to DLA Packaging Requirements for Procurement, and the Unit of Issue is listed as each (EA) with zero variance permitted in quantity. Inspection and acceptance occur at the destination point. Two distinct shipping addresses are specified: one for USS SOMERSET LPD 25 in FPO AP 96678 and another for USS ARLINGTON LPD 24 in FPO AE 09564, both requiring shipment via the fastest traceable means and explicitly prohibiting parcel post. Delivery is required by July 20, 2026, and the supplier must utilize the Vendor Shipping Module for freight coordination. Government-specific identifiers, tracking codes, and administrative data are included for internal use only, and compliance with all technical, packaging, and delivery directives is mandatory.

Industrial Valve Manufacturing

POSTED

about 9 hours ago

DEADLINE

WINDOW, OBSERVATIONThe contract specifies the procurement of one observation window, identified by NSN 9340-01-295-1753 and part number KS-24645, under solicitation SPE8E5-26-T-3671, issued by the Defense Logistics Agency. Delivery is required within five days of contract award to the destination FOB point, with no tolerance for quantity variance, and the item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards, including palletization per DLA packaging requirements. The window must be shipped to USS PATRIOT MCM 7 at FPO AP 96675, with transportation logistics governed by DLAD procedural notes C19 and C20, and no special markings are required beyond standard military compliance. The contract explicitly prohibits the intentional introduction of mercury or mercury-containing compounds into the product or its packaging, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents approved by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment boundary as mandated by NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item is classified under NAICS code 327215, and all government-specific administrative, shipment, and compliance codes are included for official use, with the required delivery date set for July 10, 2026.

Glass Product Manufacturing Made of Purchased Glass

POSTED

about 9 hours ago

DEADLINE

VALVE, GLOBEThe contract specifies the procurement of five stainless steel globe valves with a 1/2 inch size, model number 57574 W03-2074B-15MS, manufactured by Velan Valve United States OPCO, Inc. The valves feature a bolted bonnet, stainless steel F347 construction, CF8M Stellite trim, and a 600 PSI swp rating, with the NSN 4820-00-590-8770. All components must strictly comply with the DLA Master List of Technical and Quality Requirements, which override any other standards including ASTM D3951. The valves are designated a critical application item and must not contain or come into direct contact with mercury or mercury-containing compounds, except for specific exempted uses such as batteries, fluorescent lights, sensors, or chemical reagents approved by NAVSEA; portable devices containing mercury must meet additional shock-proof and secondary containment requirements per NAVSEA 5100-003D. Delivery is required FOB destination within 20 days of award, with no quantity variance permitted. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA Packaging Requirements, with palletization in compliance with specified standards and all items marked with the correct unit of issue and quantity per unit pack. The supplies must be delivered to the designated FPO address in Apalachicola, Florida, and shipping logistics are governed by DLAD Proc Note C19 and C20. The contract has a firm delivery date of April 25, 2025, with solicitation issued under SPE7MC-26-T-145A and a response deadline of August 3, 2026. The unit price is $5.00 per unit, totaling $25.00 for the full order of five valves. All vendor communications and fulfillment must reference the provided DLA vendor identification and project codes, with point of contact for inquiries listed as Marisa Thompson from the Defense Logistics Agency.

Industrial Valve Manufacturing

POSTED

about 9 hours ago

DEADLINE

VALVE, BALLThe contract specifies the procurement of one ball valve with NSN 4820-01-544-8819 and part number 76-508-01 from CONBRACO INDUSTRIES INC, under solicitation SPE7MC-26-T-144V. Delivery is required within 10 days of contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 while strictly adhering to MIL-STD-129 labeling and DLA packaging requirements, with all technical and quality standards from the DLA Master List taking precedence. The item is to be palletized in accordance with RP001 and shipped via the fastest traceable method excluding parcel post to the designated military address at Fort Riley, Kansas. The required delivery date is July 20, 2026, and the contract includes specific government-use identifiers, a point of contact for inquiries, and links to official DLA systems for compliance and unit of issue verification.

Industrial Valve Manufacturing

POSTED

about 9 hours ago

DEADLINE

ATTACHMENT, COLLET HThe contract specifies the procurement of three units of Attachment Collet H under NSN 3460-00-042-4414, with a required delivery of 20 days from the award date and delivery terms set at FOB origin. Strict limitations are placed on the use of mercury or mercury-containing compounds, prohibiting any intentional addition or direct contact with the supplied hardware unless explicitly permitted for functional components such as batteries, fluorescent lights, sensors, control systems, weapon systems, or chemical analysis reagents authorized by NAVSEA. Portable devices containing mercury must be shock-proof and feature a secondary containment barrier as mandated by NAVSEA 5100-003D. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling requirements, with palletization governed by DLA’s RP001 packaging standards, and all DLA Master List of Technical and Quality Requirements supersede any conflicting ASTM provisions. Shipments must be sent via traceable freight to the designated Naval Undersea Warfare Center in Keyport, Washington, with parcel post strictly prohibited. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The contract references specific technical and quality requirements identified by R or I numbers from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The unit price is $3.00 per item, totaling $9.00, and the contract number is SPE8E5-26-T-3666, with a required delivery date of July 20, 2026.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 9 hours ago

DEADLINE

VALVE, SAFETY RELIEFA safety relief valve rated at 0.375 inch and 5,000 PSI, subplate mounted for use with hydraulic fluid, is required under this contract, supplied by Parker-Hannifin Corporation with part number R4V03-535-10A1. The product must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition scale. Mercury and mercury-containing compounds are strictly prohibited except in specified exceptions such as batteries, fluorescent lights, instrument sensors, weapon systems, or Navy-approved chemical reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The item is identified by NSN 4820-01-572-9614, with a single unit required and delivery due within 20 days FOB origin. Inspection and acceptance occur at destination, with no variance allowed in quantity. Packaging must follow MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking codes applied. Palletization adheres to DLA packaging requirements, and shipping must occur via the fastest traceable means—parcel post is prohibited. The delivery destination is the USS Dwight D. Eisenhower CVN 69, FPO AE 09532, with transportation governed by DLAD Procurement Notes C19 and C20. The required delivery date is July 20, 2026, and the solicitation closed on August 3, 2026, under contract number SPE7MC-26-T-144R, administered by the Defense Logistics Agency.

Industrial Valve Manufacturing

POSTED

about 9 hours ago

DEADLINE

VALVE, REGULATING, FLThe contract specifies the procurement of one regulating fluid pressure valve with NSN 4820-01-507-0745 and part number 30804995 from Warren Controls, Inc., under solicitation SPE7MC-26-T-144U. Delivery is required within 20 days, FOB origin, with no tolerance for quantity variance. The item must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including marking and labeling per MIL-STD-129 and palletization according to RP001. Mercury or mercury-containing compounds are explicitly prohibited from intentional addition or direct contact with the hardware, except for limited functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents; portable items containing mercury must include shockproof design and a secondary containment boundary as per NAVSEA 5100-003D. The valve must be shipped via the fastest traceable means, with parcel post strictly prohibited, to two distinct military vessel addresses: USS SOMERSET LPD 25 and USS ARLINGTON LPD 24, both under RDD 777 and project ZH9 TP 2. The contract mandates adherence to DLA packaging and procurement standards, and vendors must utilize the VSM system for freight shipping. The original required delivery date is July 20, 2026, with a solicitation response deadline of August 3, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 9 hours ago

DEADLINE

MARKER, IDENTIFICATIThis contract, issued under solicitation number SPE8E6-26-T-3817 by the Defense Logistics Agency, mandates the delivery of one unit of a Type I identification marker with a non-extendable shelf life of 12 months, identified by NSN 7690016685478 and part number 804-5959312 Rev C. The item must comply with technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 specifications, including special marking code 32 for shelf-life compliance. Palletization follows DLA packaging standards, shipment must bypass parcel post, and delivery is FOB destination in exactly 20 days with zero variance allowed. Two separate delivery points are specified: one for USS ESSEX LHD 2 at FPO AP 96643 and another for USS DWIGHT D EISENHOWER CVN 69 at FPO AE 09532, each requiring traceable transportation and specific military freight handling procedures. The contract enforces strict adherence to DLA procedural notes for vessel shipments and requires the vendor to use the Vendor Shipping Module for logistics coordination. The original required delivery date is July 20, 2026, and the item is subject to inspection and acceptance at the destination.

Commercial Printing (except Screen and Books)

POSTED

about 9 hours ago

DEADLINE

CONTAINER, DEPLOYABLE BThe contract solicitation is for a Deployable Container, designated as CONTAINER, DEPLOYABLE B with NSN 8145-01-591-7441, under purchase request 7015793832 for a quantity of one unit. The solicitation number is SPE8ED-26-Q-0607, issued by the Defense Logistics Agency under the Department of Defense, and was posted on July 22, 2026, with a response deadline of July 26, 2026. This is a federal procurement opportunity with no specified set-aside classification or NAICS code, indicating it is open to general competition. The place of performance and organization address details are unspecified, but the procurement is U.S.-based. Interested parties must submit responses prior to the deadline through the official DIBBS portal linked in the solicitation.

POSTED

about 9 hours ago

DEADLINE

LABELThe contract specifies the procurement of a blood group labeling product identified as "BLOOD GROUP B, RH POSITIVE" with precise dimensional and formatting requirements, including a black-on-white codabar and expiration date label measuring 1-7/8 by 1-7/8 inches nominal, compliant with the latest FDA Guidelines for the Uniform Labeling of Blood and Blood Components. The unit of issue is a roll of 250 labels, and bidders must clearly indicate the source and part number being offered. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with control determined by the solicitation or award date depending on acquisition size, and the labeling must adhere fully to those referenced standards. The contract also notes that covered defense information may apply, and the delivery must be completed within 20 days after order. The solicitation, identified as SPE8E6-26-T-3824, is issued by the Defense Logistics Agency under the Department of Defense with a NAICS code of 323117 and a NSN of 7690-01-393-5085. The purchase request number is 7017574314, and only one roll is required. The place of performance is FPO with a zip code of 96632, and responses are due by August 3, 2026, with the solicitation posted on July 22, 2026. Primary point of contact is Tai Nguyen, reachable via email and phone, and additional details are accessible through the official DIBBS portal. All submissions must comply with DLA packaging and labeling mandates, including the removal of government identification from non-accepted supplies, and proper documentation of compliance must accompany bids.

POSTED

about 9 hours ago

DEADLINE

STEM, FLUID VALVEThis contract is for the procurement of a single STEM, FLUID VALVE with NSN 4810-01-516-3861 and part numbers 13182-4 and 56-12767-C27, supplied to meet strict military specifications under solicitation SPE7MC-26-T-144K. The item is classified as a critical application component and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Strict prohibitions apply: no ozone-depleting chemicals may be used in any part of the product, and mercury or mercury-containing compounds are forbidden unless specifically exempted for functional uses in batteries, instruments, or weapon systems approved by NAVSEA. Any mercury-containing portable lamps or instruments must be shock-proof and include secondary containment as per NAVSEA 5100-003D. All packaging must conform to MIL-STD-2073-1E with specific methods for preservation, wrapping, and unit containment, and labeling must follow MIL-STD-129 without special marking codes. The item must be delivered FOB destination within 20 days of contract award, with no variance in quantity allowed, and inspected and accepted at the destination. Delivery is to USS CHUNG HOON DDG 93 at FPO AP 96662, with transportation handled under DLA procedures C19 and C20. The contract requires full compliance with DoD unit of issue standards and includes a required delivery date of July 20, 2026, with solicitation response due by August 3, 2026, issued by the Defense Logistics Agency under NAICS code 332912.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 9 hours ago

DEADLINE