Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

AXIL PISTON PUMP_End_Item_B-52_NSN_4320-01-564-1570HS_PN_51197

Active
FD20302700085Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Air Force, through the 423rd Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of Axial Piston Pumps with part number 51197 and NSN 4320-01-564-1570HS, intended for use on the B-52 platform. This effort, identified by Notice ID FD20302700085 and classified under NAICS code 336413 with a size standard of 1,250 employees, is not a solicitation and no contract will be awarded based on responses. The government seeks input from all types of businesses including small businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone companies, and women-owned small businesses to assess market capability and determine if the requirement can be competed or set aside for small business participation. The estimated requirement is for 33 units, and potential suppliers must demonstrate the ability to handle full-cycle manufacturing including component procurement, inspection, testing, packaging, shipping, supply chain management, and mitigation of diminishing manufacturing sources and material shortages. Responses are to be submitted via the “Add Me to Interested Vendors” button by the deadline of August 12, 2026, at 4:59 a.m. Central Standard Time, and all communications must be directed to the workflow email 423scms.guea.workflow@us.af.mil. The government will use the collected information solely to inform future acquisition strategy, including possible segmentation by airframe, and will not evaluate or reward submissions. There are no funds allocated for this market research effort, and no obligation is created for the government by publishing this notice. Potential vendors are advised that nonrecurring engineering costs may be incurred to qualify as an approved source, and unit pricing will be determined at the time of any future contract award. The place of performance for any resulting contract will be Tinker AFB, Oklahoma.

General Info

U.S. Air Force seeks qualified manufacturers for 33 axial piston pumps for B-52, no contract award, market research only.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma CityView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

OK

Set-Aside

NONE

Documents

(1)

MSS_4320-01-564-1570HS_PR+FD20302700085.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City
Contacts1 person available
OfficeTINKER AFB, OK, 73145-3070, USA
Organization / Agency
Department Of Defense → Ok DLA Aviation At Oklahoma City
View Agency Profile
Office AddressTINKER AFB, OK, 73145-3070, USA
Contacts
SCMS
contact@example.gov

Full Description

Show more

PLEASE SEE ATTACHED DOCUMENT FOR MORE INFORMATION.


Spares Procurement of: Axial Piston Pump


Platform: B-52


NSN: 4320-01-564-1570HS
P/N: 51197


Notice ID (PR#): FD20302700085


AMC/AMSC: 3/D


Department/Ind. Agency: DEPT OF DEFENSE
Sub-tier: DEPT OF THE AIR FORCE
Major Command: AFMC
Sub Command: AIR FORCE SUSTAINMENT CENTER
Office: 423rd SCMS


GENERAL INFORMATION


• Contract Opportunity Type: Sources Sought (Original)
• All Dates/Times are: (UTC-05:00) CENTRAL STANDARD TIME, CHICAGO, USA


Classification


• Federal Stock Class (manufacture): 4320
• NAICS Code: 336413


The proposed North American Industry Classification Systems (NAICS) Code has a corresponding Size Standard of 1,250 employees. The Government is interested in all businesses to include, Large Business, Small Business, Small Disadvantaged Businesses 8(a)s, Service-Disabled Veteran-Owned Small Businesses, Hubzone Businesses, and Women-Owned Small Businesses.


• Place of Performance: Tinker AFB, OK 73145 USA


CONTACT INFORMATION


Organization: 423rd SCMS
Workflow Email: 423scms.guea.workflow@us.af.mil
SEND RESPONSES HERE


PURPOSE/DESCRIPTION


INTERESTED SOURCES MUST SELECT “ADD ME TO INTERESTED VENDORS” BUTTON ABOVE OR BELOW TO BE CONSIDERED PARTICIPANTS IN THIS MARKET RESEARCH EFFORT.


THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUESTS FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE.


This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the United States Air Force to identify potential Spares Procurement sources for the requirements identified below and to determine if this effort can be competitive or a Small Business Set-Aside. The Government may consider breaking the requirement out by airframe. This is not a Request for Proposal (or solicitation) or an indication that a contractual commitment will exist for this requirement. The government does not intend to award a contract on the basis of this market research. No funds are available to fund the information solicited.


The Government will use the information gathered through publication of this SSS to determine the best acquisition strategy for this requirement. The Government is interested in all potential sources including Small Businesses, Small Disadvantaged Businesses, 8(a) businesses, Service-Disabled Veteran-Owned Small Businesses, HUBZone Small Businesses, Women-Owned Small Businesses, etc.


The 423rd SCMS Supply Chain Management Squadron located at Tinker Air Force Base is requesting information, pursuant to FAR PART 10, in support of Market Research to identify potential sources for the Spares Procurement of the NSN(s) listed below.


REQUIREMENTS


Potential sources shall be capable of furnishing all labor, materials, facilities and equipment required to accomplish the new manufacture of the item(s) listed below. Generally, this entails the procurement/manufacture of component parts, inspection, testing, preservation/packaging, and shipping. Additionally, potential sources may be responsible for supply chain management, logistics planning, forecasting production requirements, long-lead time parts procurement, diminishing manufacturing sources and material shortage issues, and shipping serviceable assets. The unit prices will be established at the time of a contract award for the item(s) listed below.


Potential sources may be responsible for nonrecurring engineering costs associated with becoming an approved source. The spares requirement for this effort is identified below:


Part Number: 51197
NSN: 4320-01-564-1570HS
Estimated Spares Requirement: 33ea

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
DRUM ASSEMBLY, WINCH
Solicitation # SPE4A7-26-T-615R
The contract is for the procurement of seven drum assemblies for winches with part number 9-14986 and NSN 1680-00-229-9128, under solicitation SPE4A7-26-T-615R. Delivery is required within 171 days of award, with performance to occur at Tinker AFB, Oklahoma. The solicitation, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, closed for responses on August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent configuration management, inspection at origin, and export control regulations under ITAR or EAR, restricting technical data access to contractors with approved JCP certification, completed DOD export training, and formal DLA authorization. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. Physical marking of bare items and controlled handling of technical data are mandatory per DFARS 252.225-7048. All data sharing involving foreign persons, including U.S. subsidiaries and foreign nationals within the United States, is prohibited without prior government authorization.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7L1-26-T-915S
This contract specifies the procurement of a groove pulley identified by Part Number MS20219A1 and NSN 3020-00-541-3227, manufactured in compliance with MIL-DTL-7034F(1) and subject to the Qualified Products List QPL-7034. It is designated as a Navy Critical Safety Item, requiring strict adherence to all quality and safety standards, with any waivers or deviations needing explicit approval from the DSC Contracting Officer. The item must be marked per MIL-STD-129, including lot and serial numbers, contractor CAGE code, and manufacturer details, and packaged in accordance with MIL-STD-2073-1E and DLA packaging requirements. Zero non-conformance acceptance criteria apply under sampling methods such as MIL-STD-1916 or ASQ H1331, with critical attributes subject to the strictest verification levels. The use of Class I ozone-depleting chemicals is strictly prohibited, and substitute chemicals require prior approval. Non-destructive testing must be performed by accredited personnel, and all manufacturing processes must conform to SAE AS9100 quality management standards. The contract requires delivery of 132 units FOB origin within 152 days, with no tolerance for quantity variance, and inspection and acceptance to occur at the point of manufacture. The delivery destination is DLA Distribution San Diego, with specific packaging, marking, and palletization instructions defined under applicable military standards. The pricing is set at $132.00 per unit for a total value of $17,424.00. The solicitation was issued under SPE7L1-26-T-915S, with a response deadline of August 17, 2026, and a required delivery date of August 27, 2026. Defense information controls apply, and the item falls under a primary QPL or QML, meaning only qualified manufacturers may supply it. All technical and quality requirements referenced through R-numbers are governed by the DLA Master List, with revisions effective as of the solicitation or award date as applicable. Unit of issue is each, and transportation protocols follow DLA procedural notes C19 and C20.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
PISTON, HYDRAULIC AC
Solicitation # SPE4A7-26-T-612C
The contract specifies the procurement of two hydraulic pistons for air conditioning systems under NSN 1650-01-517-7844 and part number 11463841 from RANDOLPH & BALDWIN, INC. Delivery is required FOB origin within 171 days, with no variance allowed in quantity, and inspection and acceptance are to occur at the manufacturer’s location. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must follow MIL-STD-129 and RP001 guidelines. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Quality management systems must meet ISO 9001:2015, and measuring equipment must meet RT001 standards. Physical identification and bare item marking are mandatory per RQ017. The contract references revision B of drawing NR 18876 dated 08/13/1997 and revision D dated 07/02/1985, with a newer revision dated 03/14/2024 governing the current requirement. The item must be delivered to the DLA Distribution facility in New Cumberland, PA, with the original required delivery date set for January 27, 2027, and an anticipated ship date of January 31, 2027. The contract was solicited under SPE4A7-26-T-612C, classified under NAICS 336413, with Jamiah Sutton as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
VIBRATION ISOLATOR,
Solicitation # SPE4A7-26-T-612K
The contract pertains to the procurement of 605 units of a vibration isolator, identified by NSN 1680-01-552-5433 and part number 51037 from TECH PRODUCTS CORP, under solicitation SPE4A7-26-T-612K. Delivery is required within 67 days of order placement, with FOB origin terms and inspection and acceptance occurring at the destination. The quantity is fixed with no tolerance for variance, and packaging must comply with ASTM D3951 while adhering strictly to MIL-STD-129 for marking and labeling, with palletization governed by DLA’s RP001 packaging requirements. The DLA Master List of Technical and Quality Requirements supersedes any conflicting standards. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item is designated as a critical application component and must be physically marked per RQ017. Cybersecurity compliance mandates a CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. The delivery address is DLA Distribution Jacksonville, and transportation guidelines reference DLAD Proc Notes C19 and C20. The original delivery requirement is set for December 12, 2026, with a needed ship date of July 15, 2026. The contract falls under NAICS code 336413 and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
RELAY BOX ASSY
Solicitation # SPE4A5-26-T-329V
The contract pertains to the procurement of one Relay Box Assembly with part number 145E2032-5 and NSN 6615-01-244-9740, issued under solicitation SPE4A5-26-T-329V by the Department of Defense’s ASC Supplier Oper OEM Division. Delivery is required within 171 days from the contract award, with FOB origin terms and a strict zero variance in quantity. Inspection and acceptance occur at the manufacturer’s origin, in accordance with MIL-STD-1916 or a comparable zero-based sampling plan, with critical attributes requiring a verification level of VII or an AQL of 0.1. Non-conforming items must have government identification removed prior to return. The contractor must comply with DLA’s tailored quality requirements, packaging standards per MIL-STD-2073-1E, and marking requirements under MIL-STD-129, using code U for packaging and no special marking. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment. The item is not subject to Item Unique Identification. Delivery is to DLA Distribution San Joaquin at Tracy, California, with transportation governed by DLA procedural notes C19 and C20. The contract enforces the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
HEAD, HYDRAULIC MOTOR-P
Solicitation # SPE4A7-26-T-611G
The contract specifies the procurement of a hydraulic motor-pump head, identified by part number 4110820-1 and NSN 1650-01-293-6045, manufactured by Triumph Actuation Systems LLC with CAGE code 1SR57. A total of nine units are required, each subject to strict technical, quality, and packaging standards. The item is classified as a critical application item, necessitating compliance with MIL-STD-130 for Item Unique Identification (IUID) and adherence to DLA’s packaging requirements, including MIL-STD-2073-1E and MIL-STD-129 for marking and labeling. Inspection and acceptance occur at origin, with zero tolerance for quantity variance. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on their criticality. Technically referenced requirements are governed by the DLA Master List, with revisions controlled by the solicitiation award date for simplified acquisitions. Packaging must be palletized per DLA guidelines, and all items must be delivered FOB origin to the specified DLA distribution facility in New Cumberland, Pennsylvania. The delivery window is 613 days from contract award, with a required ship date of September 29, 2025. An additional line item for the First Article Test is included with a quantity of one unit, which is mandatory unless waived, and no separate price is to be quoted unless explicitly defined. The contract enforces configuration change management through Engineering Change Proposals and requires compliance with defense information handling protocols. All contractual obligations are tied to the solicitation number SPE4A7-26-T-611G, and failure to meet any referenced standard may result in rejection or non-award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SLING, AIRCRAFT MAIN
Solicitation # SPE4A5-26-T-329G
The contract pertains to the procurement of two Aircraft Main Slings, identified by NSN 1730-01-029-4648 and part number 65720-70005-041, sourced from Sikorsky Aircraft Corporation, CAGE 78286. Delivery is required within 171 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination. The quantity is strictly fixed at two units with no variance permitted. Packaging must comply with ASTM D3951 and MIL-STD-129, in alignment with DLA Packaging Requirements for Procurement, including palletization per RP001, while all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements supersede any conflicting specifications. The item is designated as a critical application item and must adhere to the approved alternate sampling plan QAP 1201, which meets or exceeds ASQ H1331 or MIL-STD-1916 standards. Cybersecurity requirements mandate CMMC Level 2 self-assessment, and configuration changes require formal Engineering Change Proposal or variance requests. Item Unique Identification is not required per service customer directive, and all non-accepted supplies must have government identification removed. The delivery address is the DLA Distribution facility in New Cumberland, PA, with a need ship date of January 31, 2027, and an original required delivery date of August 19, 2027. The contract is governed by the DLA Master List revision in effect at the solicitation issue date, and all documentation must reflect compliance with ISO 9001:2015 quality requirements.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
FILLER, COUNTERSINK
Solicitation # SPE4A7-26-T-608S
The item specified is a FILLER, COUNTERSINK with NSN 1560-00-463-1728, with a quantity of 42 units required under purchase request 7017741479. The delivery must be completed within 171 days after order award. This procurement is governed by strict export control regulations under ITAR or EAR, meaning any technical data associated with the item is controlled and cannot be disclosed or transferred to foreign persons, including foreign nationals within the United States, without prior written authorization from the Department of State or Department of Commerce. The Defense Logistics Agency restricts access to this controlled technical data exclusively to contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory training on handling DOD export-controlled data and have received formal approval from DLA. DFARS 252.225-7048 applies to all data handling and dissemination requirements. The solicitation number is SPE4A7-26-T-608S, posted on August 4, 2026, with responses due by August 12, 2026, and the contract falls under NAICS code 336413. Performance is scheduled for New Cumberland, Pennsylvania, 17070-5002, with Jessica Gentry of the Department of Defense, ASC Supplier Oper AE and AF Division, listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
MAIN HARNESS ASSY, A
Solicitation # SPE4A5-26-T-329K
Offerors must comply with strict requirements prohibiting the provision of covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and are required to affirmatively represent compliance with these restrictions. Domestic material sourcing is mandatory under the Berry Amendment, Buy American Act, and related clauses, with thresholds lowered to $150,000; non-domestic content must be disclosed upfront in the quote or via written notification to the designated point of contact. Small business joint ventures must submit specific representations under FAR provisions 52.212-3 and 52.219-1 to qualify for set-aside status. All offerors are strongly encouraged to provide quantity ranges rather than fixed figures due to the dynamic nature of demand and to avoid administrative delays in award decisions, though this flexibility does not apply to Auto IDC transactions. The use of additive manufacturing is prohibited unless explicitly approved by the contracting officer, and any proposal incorporating such items will be deemed ineligible. Effective within two months, contractors must register via DLA’s Account Management & Provisioning System to gain access to the Vendor Shipment Module, and those using VSM WebServices must implement updated schema changes to avoid loss of shipping capability. Offerors anticipating inability to respond by the closing date must submit a “No Bid” on DIBBS with an anticipated quote date or explanation to prevent assumptions of non-response and unnecessary requirement cancellations. The solicitation is for a Main Harness Assembly, NSN 1680-01-550-9330, quantity of 4 units, with a 59-day delivery requirement and response deadline of August 12, 2026. Fast Pay is not available for this procurement, and all submissions must be made through DIBBS.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AIRCR
Solicitation # SPE4A7-26-T-611D
The contract pertains to the procurement of six structural aircraft plates, specifically identified as a seal assembly for fixed leading edge slats, with NSN 1560-01-281-6333 and purchase request number 7017739703. The item is subject to strict export control under either ITAR or EAR, meaning any transfer, including mere disclosure of technical data to foreign persons regardless of location, requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on proper handling of DOD export-controlled technical data, and approved access through the DLA questionnaire are permitted to receive it. The solicitation, numbered SPE4A7-26-T-611D, was posted on August 4, 2026, with a response deadline of August 12, 2026, and is designated as a total small business set-aside under NAICS code 336413. Performance is required at Robins Air Force Base, Georgia, with a delivery window of 171 days after order. The contracting office is the Department of Defense’s ASC Supplier Oper AE and AF Division, with Mahlon Marcus as the primary point of contact. The procurement is managed under federal acquisition protocols and is accessible through the DIBBS system, with strict compliance required for handling sensitive technical data tied to national security.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL COM
Solicitation # SPE4A7-26-T-611H
The contract pertains to the procurement of 23 units of a support structural component for aircraft, identified by NSN 1560-01-434-9026, with specific packaging requirements mandated by Qinetiq under cage code 5B2G7 for Aircraft Mats and Panels 1210300059. The purchase request number is 7017740258, and the delivery timeline is set at 171 days after contract award. The solicitation, identified as SPE4A7-26-T-611H, was posted on August 4, 2026, with responses due by August 12, 2026, under a federal procurement type and NAICS code 336413. The acquiring agency is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with performance located in New Cumberland, Pennsylvania, ZIP 17070-5002. Primary point of contact is Shante'l Wyche, reachable at 804-279-4312, and all details are accessible via the DIBBS website under the specified solicitation link.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PANEL, CONTROL, ELECT
Solicitation # SPE4A7-26-T-616C
The contract specifies the procurement of a PANEL CONTROL ELECTRICAL-ELECTRONIC EQUIPMENT with NSN 1680-01-535-8137 and part number 5442550-001, manufactured by SCI TECHNOLOGY, INC, under solicitation SPE4A7-26-T-616C. A total of three units are required at a unit price of $3.00, with delivery due in 171 days FOB origin, and inspection and acceptance to occur at the manufacturer’s location. The item is designated as a critical application item, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards like ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with no unit item identification mandated per DFARS 252.211-7003(c)(1)(i). Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and configuration changes must be managed through formal engineering change proposals or variance requests. The contract is a total small business set-aside under NAICS 336413, with a response deadline of August 12, 2026, and delivery must be made to the designated warehouse in Tracy, California by January 31, 2027, with an original required delivery date of August 16, 2027. All transportation logistics are governed by DLA procedural notes C19 and C20.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

NAICS: 541611
New
Federal
Small Business Subcontracting Plan DevelopmentThe contract requires the development and submission of a Small Business Subcontracting Plan to assist a prime contractor in meeting its federal subcontracting goals as outlined under FAR 52.219-9, ensuring compliance with federal small business participation requirements. The plan must be structured to support meaningful opportunities for small businesses across relevant industries, with a focus on the NAICS code 541611, which pertains to Management Consulting Services. The submission deadline is September 3, 2026, and the effort is being managed by the Department of Defense through the Defense Logistics Agency Aviation in Oklahoma City. There is no set-aside designation specified for this contract, and the place of performance details are unspecified, indicating that the plan may be developed remotely or tailored to support prime contractor operations across multiple locations. The work must be completed and delivered by the stated deadline to enable the prime contractor to fulfill its regulatory obligations under federal contracting rules. While no point of contact is listed, the proposal must align precisely with the requirements of FAR 52.219-9 to be considered acceptable and actionable.
Administrative Management and General Management Consulting Services

POSTED

about 22 hours ago

DEADLINE

in 29 days
View Details
NAICS: 561910
New
Federal
Packaging and Containerization of Aerospace HardwareThe contract entails the military-compliant packaging and containerization of aerospace hardware using skids and inserts, strictly adhering to ASTM-D-6199 and A-A-55057 standards to ensure durability, protection, and compliance with defense logistics requirements. All packaging solutions must meet rigorous environmental and handling specifications for secure transport and long-term storage of sensitive aerospace components under military-grade conditions. The work is subcontracted under a procurement initiated by the Department of Defense through the Ok DLA Aviation office located in Oklahoma City, with performance expected to align with designated defense supply chain protocols. The solicitation was posted on August 4, 2026, with a response deadline of September 3, 2026, at 8:00 PM Eastern Time, allowing potential vendors a minimum of four weeks to prepare and submit proposals. The North American Industry Classification System code 561910 applies, indicating the focus on support activities for transportation and packaging services. While no set-aside provisions are specified, the contract is structured as a subcontract and requires full compliance with federal defense packaging mandates without exception. All submissions must demonstrate technical expertise in military packaging systems and proven capability to execute under the referenced standards.
Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541380
New
Federal
First Article Testing and Quality DocumentationThe contract requires the execution and documentation of First Article Testing (FAT) to ensure compliance with government quality standards, specifically involving the submission of Inspection and Measurement Systems (IMS), Product Orientation Specifications (POS), and comprehensive test reports for official approval. All documentation must be meticulously prepared and submitted within the specified timeline to meet federal requirements, with emphasis on accuracy, traceability, and adherence to technical specifications established for defense-related components. The work is classified as a subcontract under NAICS code 541380 and is issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City, with a firm response deadline of September 3, 2026. Participation is open to qualified entities capable of delivering certified FAT outcomes and quality assurance documentation without set-aside restrictions, and performance is tied to ensuring the readiness and acceptance of products within the defense supply chain.
Testing Laboratories and Services

POSTED

about 22 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332813
New
Federal
Precision Machining of Titanium Alloy ComponentsThe contract calls for precision CNC machining, milling, and finishing of high-strength titanium alloy components designed for aerospace nozzle systems, requiring advanced manufacturing capabilities to meet stringent aerospace integrity and performance standards. Work must adhere to tight tolerances and material specifications native to titanium alloys used in high-temperature, high-stress environments, with all processes ensuring dimensional accuracy, surface finish, and structural integrity critical to mission-critical propulsion applications. The work is classified as a subcontract under NAICS code 332813, indicating specialized metal forging and stamping activities with a focus on custom machining. The opportunity is managed by the Department of Defense through the Ok DLA Aviation office in Oklahoma City, with response submissions due by September 3, 2026. There is no set-asides designated for small businesses or other categories, and the place of performance is not specified in detail, implying flexibility in location provided the deliverables meet contractual and technical requirements. Interested parties must possess the technical expertise, equipment, and quality control systems necessary to handle aerospace-grade titanium under controlled manufacturing conditions, with all completed parts expected to be fully traceable and compliant with defense industry specifications.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 22 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332994
New
Federal
Aerospace Actuator and Nozzle Hardware InstallationThe contract calls for the installation and mechanical integration of precision aerospace components, specifically actuators, sync rings, and associated hardware for titanium alloy nozzle assemblies. This work requires high-accuracy fabrication and assembly techniques to meet the stringent performance and reliability standards of aerospace applications. All components must be integrated with strict adherence to engineering specifications to ensure functional compatibility and structural integrity under extreme operating conditions. This is a subcontract opportunity under the NAICS code 332994, issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on August 4, 2026, with a firm response deadline of September 3, 2026, at 8:00 PM. The place of performance and specific location details are not provided, but the work is expected to support critical defense aerospace systems. Interested parties must submit proposals by the deadline to be considered, and no set-aside classifications are indicated, meaning the contract is open to all eligible subcontractors.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 29 days
View Details
NAICS: 423830
New
Federal
Aerospace Component Supply Chain ManagementThe contract entails end-to-end supply chain management for aerospace components specifically tailored to meet military compliance requirements, with a strong emphasis on sourcing long-lead and diminishing manufacturing source items that are critical to defense systems. The scope includes full traceability throughout the supply chain, secure logistics coordination, and comprehensive documentation to ensure adherence to stringent defense standards. Services must support uninterrupted availability of parts vital to military aircraft and equipment, requiring proven experience in navigating complex procurement challenges associated with obsolescence and restricted sourcing. The solicitation is classified as a subcontract under NAICS code 423830 and is issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. Bidders must submit responses by the deadline of August 12, 2026, at 4:59 a.m. Eastern Time, with the opportunity posted on August 4, 2026. While the place of performance and point of contact details are not specified, compliance with federal defense supply protocols and the ability to deliver verified, auditable supply chains are fundamental to qualification.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
Federal
Source Qualification and Technical Data SupportThe contract is for engineering support focused on preparing and submitting Source Acceptance Review (SAR) packages, managing nonrecurring engineering (NRE) activities, and ensuring full compliance with military qualification requirements and engineering data lists. This support is critical to maintaining the integrity and traceability of technical documentation for defense systems, ensuring all engineering deliverables meet stringent military standards. The work involves close coordination across technical teams to validate data accuracy, update documentation in line with evolving requirements, and facilitate timely approvals for source qualification. The contract is classified as a subcontract under NAICS code 541330, indicating it relates to engineering services. It was posted on August 4, 2026, with a response deadline of August 12, 2026, and is managed by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. Performance location details are not specified, but the work is directly tied to defense aviation systems and procurement compliance. The solicitation number is not provided, and no set-aside type is indicated, suggesting it is open to qualified subcontractors without specific socioeconomic preferences. All activities must align with DoD data control and technical documentation protocols to support operational readiness and supply chain certification.
Engineering Services

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
Federal
Hydraulic Accumulator Manufacturing and SupplyThe contract involves the full-cycle manufacturing, testing, packaging, and delivery of 33 hydraulic accumulators identified by part number M5498-1 and NSN 1650-00-640-8485, with all components sourced and assembled in strict compliance with applicable military specifications. The work encompasses every stage from raw material procurement and fabrication through rigorous quality assurance testing and final packaging for secure shipment, ensuring the end products meet the performance, durability, and safety standards required for defense applications. The opportunity is structured as a subcontract with a NAICS code of 332994, indicating it falls under Other Miscellaneous Fabricated Metal Product Manufacturing, and is issued under the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, providing a tight nine-day window for interested parties to submit proposals. The place of performance and contact details are not specified, but the requirement demands adherence to federal defense logistics protocols and full traceability of materials and processes.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
SERVOCYLINDER_End_Item_F-15_NSN_1650003135013_PN_3151-015
Solicitation # FD20302700163
The U.S. Air Force, through the 423rd SCMS Requirements Office at Tinker Air Force Base, is conducting market research to identify potential sources for the new manufacture of the Servocylinder with NSN 1650-00-313-5013 and Part Number 3151-015, intended for F-15 platforms. This effort is a Sources Sought Synopsis under FAR Part 10, not a solicitation, and no contract award is anticipated based on responses. The requirement is for approximately 31 units with a potential range of 8 to 47, and interested vendors must demonstrate capability in full manufacturing, including component procurement, inspection, testing, packaging, shipping, and management of supply chain challenges such as diminishing manufacturing sources and long-lead time parts. Nonrecurring engineering costs associated with qualification as an approved source may also be required. The North American Industry Classification System code is 336413 with a size standard of 1,250 employees, and the government is actively seeking participation from all business categories including Small Businesses, Small Disadvantaged Businesses, 8(a) firms, Service-Disabled Veteran-Owned Small Businesses, HUBZone businesses, and Women-Owned Small Businesses. Responses must be submitted through the designated workflow email, and all actions must occur within the specified timeline under Central Standard Time.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
HOUSING/INDICATOR_End_Item_B-52_NSN_6680011726958RK_PN_10006-1002-01
Solicitation # FD20302602505
The U.S. Air Force, through the 422nd Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify potential vendors capable of manufacturing spares for the Housing/Indicator part with NSN 6680-01-172-6958RK and P/N 10006-1002-01, intended for use on the B-52 platform. This effort, identified by Notice ID FD20302602505, is a Sources Sought synopsis under FAR Part 10 and is not a solicitation or a commitment to award a contract; no funds are available at this time. The Government is seeking information from all types of businesses including large firms, small businesses, 8(a), service-disabled veteran-owned, HUBZone, and women-owned small businesses to assess competition and determine if the requirement can be set aside for small business participation. The estimated requirement is for 60 units, and potential suppliers must demonstrate the ability to perform full-scale new manufacture including component procurement, inspection, testing, packaging, shipping, and management of supply chain challenges such as diminishing manufacturing sources. The contract activity falls under the NAICS code 336413 with a size standard of 1,250 employees, and performance would be centered at Tinker AFB, Oklahoma. Interested parties must register via the “Add Me to Interested Vendors” function to be considered; responses will not be evaluated as bids and no formal solicitation currently exists. The government will use the collected information to shape future acquisition strategies, potentially breaking the requirement by airframe or other criteria, and will consider nonrecurring engineering costs associated with qualifying as a new source. All communications and responses must be sent to 422.scms.afmc.rfi@us.af.mil, and responses are due by September 4, 2026, in Central Standard Time. The Office of the Department of the Air Force, under the Air Force Sustainment Center, is leading this effort to ensure a robust and capable industrial base for critical spare parts.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 30 days
View Details
NAICS: 336413
New
Federal
Hydraulic Accumulator_End_Item_KC-135_NSN_1650-00-640-8485_PN_M5498-1
Solicitation # FD20302700112
The U.S. Air Force, through the 423rd Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify potential sources for the new manufacture of the Hydraulic Accumulator with NSN 1650-00-640-8485 and Part Number M5498-1, intended for use on the KC-135 platform. This effort is a Sources Sought synopsis under FAR Part 10, not a solicitation or procurement action, and no contract award is anticipated based on responses. The Government seeks to determine if the requirement for 33 units can be competitively sourced and whether it is suitable for a Small Business Set-aside, and is interested in submissions from all types of businesses including Small, Small Disadvantaged, 8(a), Service-Disabled Veteran-Owned, HUBZone, and Women-Owned Small Businesses. Respondents must be capable of managing full production cycles including component procurement, inspection, testing, packaging, shipping, and addressing supply chain challenges such as diminishing manufacturing sources and long-lead parts acquisition, with potential responsibility for nonrecurring engineering costs to qualify as an approved source. The procurement is classified under Federal Stock Class 1650 and NAICS Code 336413, which carries a size standard of 1,250 employees. The place of performance is Tinker AFB, Oklahoma, and all communications must be directed to the designated workflow email, 423scms.guea.workflow@us.af.mil. Interested parties must actively select the "ADD ME TO INTERESTED VENDORS" button to participate; responses outside this mechanism will not be acknowledged. The market research window opened on August 4, 2026, and closes on August 12, 2026, with all timestamps in Central Standard Time. No funding is currently available for this research phase, and the resulting data will solely inform the Air Force’s future acquisition strategy, including possible separation of requirements by airframe. Any solicitations or contracts for this item will be issued separately in the future.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
Federal
NSN: 2840-01-374-0735NZ, P/N: 4080513, NOUN: SUPPORT, AUGMENTER PR FD2030-25-00159
Solicitation # SPRTA126R0386
The contract solicitation SPRTA1-26-R-0386 seeks Augmenter Support components identified by NSN 2840-01-374-0735NZ and Part Number 4080513, intended for use on F-100 engines. The item is a nozzle assembly fabricated from Titanium Alloy that provides structural support for actuators, sync rings, and related hardware. The procurement includes 32 units under Line Item OOO1 with a baseline quantity of 32, minimum of 9, median of 34, and maximum of 51 units, alongside first article submissions: two production units, one expended unit, one test plan, and one test report. Only qualified suppliers—Barnes Group, RTX Corp, and Jedco Inc.—are eligible to respond, and all offers must comply with qualification standards per FAR clauses 52.209-1 or 52.209-2. The acquisition is subject to export control regulations and may be impacted by Free Trade Agreements, though commercial item policies under FAR Part 12 are not being applied. Electronic submission is required, and all inquiries must be directed to Alex Varughese via email; no phone requests are accepted. An independent Ombudsman is available to address contractor concerns during the proposal phase, maintaining strict confidentiality without influencing source selection. The solicitation will be accessible via SAM.gov with a response deadline of August 4, 2026, and awards will be contingent on meeting all technical, qualification, and compliance requirements at the time of award.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 29 days
View Details