This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on April 23, 2018. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

B1 MAINTENANCE PLATFORM STANDS

Closed

W58RGZ-18-Q-0011Federal

Submission Closed05/23/2018, 10:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

DIBBS

Supply of Spacer, Sleeve (NSN 5365-01-034-2519)This subcontract, set aside for total small businesses under NAICS code 336413, involves the manufacture and delivery of 124,000 sleeve spacers, identified as NSN 5365-01-034-2519, for the Defense Logistics Agency Weapons Support ASC. The selected provider will supply these units to DLA Depots, ensuring all items are produced and delivered according to strict military and industry standards. Technical requirements include sampling per MIL-STD-1916 or ASQ H1331, packaging according to ASTM D3951 and RP001, and marking and labeling in compliance with MIL-STD-129. Additionally, the contractor must maintain CMMC Level 1 certification and adhere to all ITAR and EAR export control regulations to ensure the security and legality of the supply chain.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Antenna-430 ADF Repair and Overhaul ServicesThis subcontract involves providing repair and overhaul services for the Antenna-430 ADF, A1, supporting prime contractors on projects for the Department of Defense Navsup Weapon Systems Support. The scope of work includes the complete teardown, evaluation, and modification of units, where defective components are identified and replaced based on approved repair manual limits. All work must be performed using specialized avionics testing equipment and must strictly adhere to IPC/EIAJ-STD-001C soldering standards to ensure units are delivered in Ready for Issue condition. The opportunity is categorized under NAICS code 336413 and was posted on October 20, 2026, with a response deadline of November 19, 2026. This technical engagement focuses on maintaining critical aviation components to meet rigorous military specifications and operational readiness requirements.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Wheel Component SupplyThis subcontract, titled Aircraft Wheel Component Supply, involves providing replacement components, seals, and hardware to prime contractors supporting NAVSUP Weapon Systems Support aircraft wheel overhaul projects. The scope specifically focuses on delivering certified aircraft-grade replacement parts and aviation-grade alloys that meet approved repair manual specifications for NSN 1630-14-597-7780. Managed under the Department of Defense, the contract requires strict adherence to the Buy American Act and Trade Agreements certifications. Additionally, the supplier is responsible for providing Material Safety Data Sheets for any hazardous materials delivered. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, falling under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Wheel Half Repair and Overhaul ServicesThis subcontract for Aircraft Wheel Half Repair and Overhaul Services supports NAVSUP Weapon Systems Support projects within the Department of Defense. The scope of work involves the comprehensive teardown, evaluation, repair, and overhaul of aircraft wheel halves under NSN 1630-14-597-7780. The selected provider will be responsible for disassembling units, cleaning and inspecting parts according to approved manuals, replacing defective components, and reassembling the units using specialized fixtures, jigs, and test equipment. All deliverables must be provided in Ready for Issue condition and must strictly comply with MIL-STD-130 and MIL-STD-129 standards. This opportunity falls under NAICS code 336413, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Flight Model Solar Array Wings SupplyThis subcontract involves the supply of flight-ready, qualified solar panel sets for prime contractors working on NASA/NSSC TERP RAPTOR 12U CubeSat projects. The selected provider is responsible for manufacturing solar array wings that adhere to strict space-flight specifications, utilizing space-grade solar cells, flight-qualified substrates, and deployment mechanisms specifically designed for the 12U CubeSat standard. All deliverables must meet the rigorous acceptance and verification standards established by the NASA Goddard Space Flight Center. The final requirement is the delivery of a complete set of flight-ready solar array wings, with performance taking place in Greenbelt, Maryland.

National Aeronautics And Space Administration

POSTED

DEADLINE

Component Evaluation and InspectionThis subcontract, titled Component Evaluation and Inspection, is issued by the Navsup Weapon Systems Support under the Department of Defense. The project involves performing technical evaluations and inspections of spoiler assemblies for prime contractors working on Department of the Navy aerospace projects. The primary objective is to identify structural cracks, corrosion, or fatigue through the application of Non-Destructive Testing methods, specifically X-ray, Ultrasonic, and Dye Penetrant techniques. Qualified providers must hold ASNT or equivalent aerospace inspection certifications to ensure technical compliance. The final deliverable for this engagement is a detailed evaluation report that includes specific recommended repair actions. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, and falls under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Spoiler Assembly Component SupplyThis subcontract, titled Spoiler Assembly Component Supply, is issued by Navsup Weapon Systems Support under the Department of Defense. The agreement focuses on the procurement of aerospace-grade replacement parts, fasteners, and sub-components necessary for the repair of NSN 1680-01-650-9016. The supplier is responsible for sourcing OEM or approved equivalent parts that match Reference Number 81205 113A4600-406 to support prime contractors on Department of the Navy aerospace repair projects. To ensure regulatory and origin compliance, the provider must furnish Buy American and Trade Agreements certifications. The contract falls under NAICS code 336413, with a posting date of October 20, 2026, and a response deadline of November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Spoiler Assembly Teardown and RepairThis subcontract, managed by Navsup Weapon Systems Support for the Department of Defense, involves the teardown, evaluation, and repair of NRP Spoiler Assemblies (NSN 1680-01-650-9016) for Department of the Navy aerospace projects. The selected contractor will be responsible for disassembling the units, conducting technical evaluations for wear and damage, and performing necessary repairs or modifications in strict accordance with OEM or military specifications. The work requires the use of precision measuring instruments and aerospace-grade tooling to ensure the delivery of certified, serviceable assemblies. Additionally, the contractor must possess CAV RP reporting capabilities to meet the administrative requirements of the project. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Skin Component Supplier (NSN 1560-01-723-6222)This subcontract involves the supply of aircraft skin components for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The selected supplier is responsible for manufacturing or sourcing parts that strictly adhere to NSN 1RD 1560-01-723-6222 QF specifications. All deliverables must be packaged according to MIL-STD-2073 and marked in accordance with MIL-STD-129, with final delivery directed to shipping point W25G1U. To ensure quality and precision, the contractor must maintain ISO 9001 or SAE AS9100 certification. Additionally, all equipment used in the process must be calibrated to NCSL Z540.3 or ISO 10012 standards. This opportunity falls under NAICS code 336413 and requires responses to be submitted by November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Supply of Attitude Indicators (NSN 6610-01-432-3229)This subcontract, issued by the Department of Defense through the Pa DLA Aviation At Philadelphia, involves the supply of Attitude Indicators under NSN 6610-01-432-3229 for NAVAIR aviation component projects. The selected provider is responsible for manufacturing or procuring units that strictly adhere to TDP Version 003, ensuring that all hardware, software, and firmware are fully aligned with the established equipment baseline. The contractor must ensure all units are marked according to MIL-STD-130 and packaged in compliance with MIL-STD-2073. To qualify, the provider must maintain ISO 9001 certification and demonstrate compliance with DFARS 252.204-7012. The final deliverable consists of the physical indicator units, fully marked and packaged for delivery.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Fuel Relief Valve Teardown and RepairThis subcontract with Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of Fuel Relief Valves under NSN 7RH 2915-01-201-6004 EK. The scope of work includes conducting wear analysis, implementing approved repair procedures, and performing necessary environmental and quality conformance testing to deliver a fully certified, repaired valve for US Navy aviation projects. The contractor must maintain ISO 9001 or SAE AS9100 certification and utilize measuring and test equipment calibrated to NCSL Z540.3 or ISO 10012 standards. This opportunity falls under NAICS code 336413, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aviation Component Parts SupplierThis subcontract, managed by Navsup Weapon Systems Support under the Department of Defense, involves the supply of replacement parts, seals, and hardware for Air Pressure Regulators, specifically part number 166001039791. These components are intended for prime contractors working on Department of the Navy aviation projects. The supplier is required to provide OEM or approved equivalent aviation-grade seals and valves, ensuring all materials meet strict quality and origin standards. Key deliverables include the physical parts along with necessary quality certifications in compliance with Trade Agreements and hazardous materials modal regulations. The opportunity was posted on October 20, 2026, with a response deadline of November 20, 2026. The contract falls under NAICS code 336413, focusing on the specialized procurement of aviation component parts.

Navsup Weapon Systems Support

POSTED

about 9 hours ago

DEADLINE

in about 1 month

General Info

Agency

Department Of Defense → W6QK Acc-Rsa

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

Set-Aside

SBA

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedApr 23

Combined Synopsis

Response DeadlineMay 23

Deadline has passed

Submission Closed

05/23/2018, 10:30:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W6QK Acc-Rsa

Contacts2 people available

OfficeREDSTONE ARSENAL, AL, 35898-5090, USA

Organization / AgencyDepartment Of Defense → W6QK Acc-Rsa

Office AddressREDSTONE ARSENAL, AL, 35898-5090, USA

Contacts

Edward E SmithContract Specialist

contact@example.gov

Mitchell OkoContract Officer

contact@example.gov

Full Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in the Federal Acquisition Regulation System (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The combined synopsis/solicitation is issued as a Firm Fixed Price (FFP), under solicitation number W58RGZ-18-Q-0011. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Regulations Supplement (DFARS). This requirement is a Foreign Military Sales (FMS) for the country of Korea under letter of agreement KS-B-ZGM. The aviation maintenance stands are required to support maintenance of the CH-47, AH-64, and UH-60 from ground level to the top of the rotor system. The requirement for B1 maintenance stand which is a single, variable-height, portable stair structure, and platform assembly, is as follows: NOUN: B1 Maintenance Platform Stands QTY: 4 EA NSN: 1730-00-390-5618 Days after contract award (DACA): 60 DAYS FOB ORGIN: Ship To: BKS003 - CJ Korea Express USA Corporation 18805 Laurel Park Road Rancho Dominguez, CA 90220-6004 POC: Ms. Kyung Yi (Tele: 313-639-3333, Ext. 250) Mark for: BKSL00 (Mark For) BA3ZCF (SUPPAD) ROKA Aviation Maintenance Group TEL 82-55-545-3120 P.O. BOX 30 BUSAN, KOREA Early delivery is desired and acceptable at no additional cost. Mark for shipment as specified and in accordance with MIL-STD-129 Packaging Reference: MIL-STD-2073 Provisions and clauses applicable to this acquisition are as follows: FAR 52.212-1 Instructions to Offerors - Commercial Items, FAR 52.212-3 Offeror Representations and Certifications - Commercial Items, FAR 52.212-4 Contract Terms and Conditions - Commercial Items, FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items (applicable clauses are: 52.204-10, 52.204-13, 52.204-18.52.204-19,52.204-21,52.209-6,52.209-10,52.211-8, 52.219-28, 52.222-21, 52.222-26, 52.222-36,52.222-50,52.223-18,52.224-3,52.225-13,252.225-7048,52.232-23,52.232-25,52,232-39,52.232-40,252.232-7010,52.232-1,52.233-3,52.233-4,252.243-7001,52.244-6,52.246-17,52.247-68,252.247-7028,52.249-1,52.252-2,52.253-1,252.203-7000,252.203-7002,52.204-10,52.204-13,52.204-18,52.204-19,52.204-21,252.204-7003,252.204-7012,252-204-7015. Proposals shall include a completed copy of the provisions at FAR 52.212-3 Offeror Representation and Certifications-Commercial Items or certification that these have been completed online via Online Representations and Certifications application (ORCA) at http://www.bpn.gov/. The Government will award a contract resulting from this combined synopsis/solicitation to the responsible offeror who is determined to be the lowest-priced, technically-acceptable offeror. The offeror's proposal must be signed, dated and delivered, submitted electronically to the following office no later than 4:30 p.m. (Central) on 23 May 2018. No telephone requests will be accepted. Please email your quotes to Edward Smith, at Edward.e.smith.civ@mail.mil and Mitchell Oko, mitchell.a.oko.civ@mail.mil. This solicitation for the Maintenance Platform Stands, will not have any drawing provided please refer to the NSN. Note: See Dimensions Type: B1 Weight: 850lbs Height (Lowered) 35 in Height (Extended) 120 in Length, overall 132 in Width, overall 48 in The height varies between 4 and 10 feet Level of Preservation - Military, Packing A is protection required to meet the most severe worldwide shipment, handling, and storing conditions. A Level A pack, must in tandem with the applied method of preservation, be capable of protecting material from the effects of direct exposure to extremes of climate, terrain, and operational and transportation environments. Examples of containers used for Level A packing requirements include, but are not limited to, overseas type wood boxes, and plastic and metal reusable containers. Level of Packing: A Mark for Shipment as specified and in accordance with MIL STD 129. Packaging Reference: MILSTD20173 Quantity per Unit Pack: 1 Intermediate Container Quantity: 000 Method of Preservation: 20 Cleaning and Drying Procedure: 1 Preservative Material: 11 Wrapping Material: GB Cushioning and Dunnage: N/A Cushioning Thickness: M Unit container: F2 Intermediate Container: 00 Unit container Level: SA Special Marking: 00 Level A Packing: F Optional Procedure Indicator: M Maximum Unit Pack Weight: 235.OLB Maximum Unit Pack Cube: 281.033CF Unit Pack Length: 175.0 IN Unit Pack Width: 75.0 IN Unit Pack Depth: 7.0 IN Supplemental Instructions: WOOD PACKAGING MATERIAL MUST BE ISPM-15 COMPLIANT