BACKSHELL, ELECTRICA

The contract pertains to the procurement of backshells and cable clamp adapters identified by part numbers 6441-221213-0655, GA800MS22F12, and SE9F2512A1.5-34R, supplied by Electro Adapter Inc, Northrop Grumman Systems Corporation, and Joslyn Sunbank Company, LLC, respectively. These items are classified as critical application components and must comply with stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must conform to RP001 DLA packaging requirements and MIL-STD-129 for marking and labeling, with hazardous materials subject to Fed-Std-313 and TQ requirement IP025, while non-hazardous items must be commercially packaged accordingly. The contract specifies a total quantity of seven units to be delivered FOB origin within 168 days, with no variance permitted in shipment quantity. Inspection and acceptance occur at the destination facility located at Tracy, California, with delivery required no later than March 21, 2027, though the need ship date is January 5, 2027. The unit of issue is each (EA), with a unit price of $7.00, totaling $49.00. All packaging must reflect the designated Unit of Issue and Quantity per Unit Pack, and palletization must comply with DLA procurement standards. Transportation and shipping instructions are governed by DLAD Proc Notes C19 and C20, and the NSN 5935-01-187-6281 must be used for identification. The solicitation was issued under SPE7M5-26-T-315Z, with Margaret Smith as the primary point of contact at the Department of Defense’s Active Devices Division.