Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

BACKSHELL, ELECTRICAL C

Active
SPE7M5-26-T-505QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the DLA Land and Maritime Active Devices Division, seeks quotations for the procurement of 10 electrical connector backshells, identified by NSN 5935-01-317-5098 and part number M85049/9-66W. The acquisition falls under NAICS code 334417 and is subject to Qualified Products List (QPL) requirements for FSC 5935 connector assemblies and contacts. Key technical specifications include compliance with SAE AS85049/9 and SAE AS85049F standards. The contract includes strict environmental prohibitions against the use of Class I ozone-depleting substances in design, manufacturing, or testing unless written approval is obtained. The delivery schedule requires a need ship date of February 3, 2027, with a 127-day delivery window. Terms are FOB Origin, and the shipment is managed under the First Destination Transportation program, with the final destination being the DLA Distribution New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. Contractors must adhere to rigorous packaging and marking standards, including MIL-STD-129 and DLA packaging requirements, and must ensure proper labeling for hazardous materials in accordance with the Hazard Communication Standard. Administrative requirements include electronic invoicing and receiving via the Wide Area WorkFlow (WAWF) system. Additionally, the contract incorporates various federal and defense regulations, including the Buy American Act, cybersecurity safeguarding requirements under DFARS 252.204-7012, and equal opportunity provisions.

General Info

DLA seeks 10 electrical connector backshells delivered to New Cumberland by February 2027.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-505Q Request for Quotations

PDF19 pagesrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUSA

Full Description

Show more
BACKSHELL,ELECTRICAL CONNECTOR
BACKSHELL,ELECTRICAL CONNECTOR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ012: QUALIFIED PRODUCTS LIST (QPL) CONNECTOR ASSEMBLIES AND QPL
ELECTRICAL CONTACTS. THIS IS A QUALIFIED ITEM. QUALIFICATION
REQUIREMENTS IN PROCUREMENT NOTE H01 "QUALIFIED PRODUCTS LIST (QPL) FOR
FEDERAL STOCK CLASS (FSC) 5935 CONNECTOR ASSEMBLIES AND CONTACTS" APPLY.
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
THIS NSN IS LISTED AS A PRIMARY QPL OR QML THEREFORE
THE QUALIFIED PRODUCTS LIST OR QUALIFIED MANUFACTURERS
LIST IS APPLICABLE.
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AS85049/9 (R 2017) REVISION NR C DTD 07/01/2012 PART PIECE NUMBER: M85049/9-66W
TDP Rev A Gen 1
SPE7M5-26-T-505Q
SECTION B
IAW REFERENCE NON GOVT STD SAE AS85049F
REVISION NR F DTD 04/01/2021
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018380857 0001 EA 10.000
NSN/MATERIAL:5935013175098
DELIVERY (IN DAYS):0127
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
SPE7M5-26-T-505Q
SECTION B
PR: 7018380857 PRLI: 0001 CONT’D
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/03/2027 Original Required Delivery Date:02/03/2027
SPE7M5-26-T-505Q NSN/Part Number: 5935-01-317-5098 Quantity: 10 EA Purchase Request: 7018380857QTY: 10 Delivery: 127 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334417
New
DIBBS
PLATE, RETAINING, ELECTR
Solicitation # SPE4A6-26-T-32QW
This solicitation, issued by the DLA Aviation ASC Commodities Division under number SPE4A6-26-T-32QW, is a request for quotations for the procurement of five electrical connector retaining plates, identified by NSN 5935-01-209-3480 and Honeywell International Inc part number 2541579. The item is designated as a critical application item and does not have a shelf life requirement. This is a fixed-price contract with delivery terms set as FOB Origin, requiring shipment to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The required delivery date is September 24, 2028, which is approximately 729 days from the solicitation period. The contract incorporates rigorous technical and quality standards, requiring manufacturers to maintain an inspection system that complies with at minimum SAE AS9003 or ISO 9001 tailored to SAE AS9003. Quality assurance and sampling must adhere to MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with specific verification levels for critical, major, and minor attributes. Packaging must comply with MIL-STD-2073-1E and palletization must follow DLA requirements, while all marking must meet MIL-STD-129. Compliance with various federal and defense regulations is mandatory, including the Buy American Act, cybersecurity safeguarding of covered defense information, and prohibitions regarding hazardous materials and telecommunications equipment. Quotations are due by the close of business on September 25, 2026, and must be submitted via DIBBS.
ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE4A6-26-T-32SL
This solicitation is for a fixed-price procurement of 16 each of an electrical plug connector, identified as NSN 5935-01-652-8408 and tied to Northrop Grumman Systems Corporation part number 001-008704-0001. It was issued by DLA Aviation, ASC Commodities Division under solicitation number SPE4A6-26-T-32SL, with quotes due September 25, 2026. The item is designated as a critical application item, with delivery to Tinker AFB, Oklahoma, and the packaging, marking, and shipping destination all clearly set for DLA Distribution Depot Oklahoma. The solicitation requires FOB origin terms, destination inspection and acceptance, and a delivery lead time of 171 days, with the contract documents also noting a required ship date of March 16, 2027 and an original required delivery date of November 28, 2027. The procurement is governed by DLA master solicitation terms for automated simplified acquisitions and incorporates a number of technical, quality, packaging, cybersecurity, and compliance requirements. Relevant DLA master list provisions include technical and quality controls such as RA001, RD003, RP001, RQ001, RQ011, and RQ017, with item unique identification not required at the customer’s request. Packaging must follow MIL-STD-2073-1E and DLA RP001 requirements, while marking must comply with MIL-STD-129 and no special marking is required. Sampling and inspection are tightly defined, using MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based sampling plan, with unspecified attributes treated as major and destination inspection/acceptance applying under FAR 52.246-2. The contract also includes standard clauses addressing trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, safeguarding covered contractor information systems, changes, subcontracting, unauthorized obligations, accelerated payments to small business subcontractors, and default. Additional conditions cover Buy American and balance of payments requirements, possible Berry Amendment and domestic sourcing constraints, cyber reporting obligations under DFARS 252.204-7012, prohibition on certain confidentiality agreements, and review of SAM exclusions for covered defense telecommunications items. Payment is handled through WAWF, and the solicitation notes the DLA master solicitation revision and evaluation rules, including a prohibition on award for unapproved additive manufacturing items and the possible use of HUBZone price evaluation preference.
ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS