BAG, PLASTIC

BAG, PLASTIC, 24 BY 24 INCHES, 4.0 MILS THICK<(>,<)>
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
LOW DENSITY POLYETHYLENE, CLEAR, 250S
P/N: SP2424
STAR POLY BAG, INC. (1WRQ1)
BROOKLYN, NY 11207-2904
U/I PACKAGE (PG) of 250
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
STAR POLY BAG, INC. 1WRQ1 P/N SP2424
STAR POLY BAG, INC. 1WRQ1 P/N SPECIMEN TRANSPORT BAG
CHALMUR BAG COMPANY, INC 0BZC4 P/N 2424
CHALMUR BAG COMPANY, INC 0BZC4 P/N 2424-004
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0001 8105-01-358-9325 52.000 PG $ ______________ $ ______________
BAG,PLASTIC
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 90 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z UNIT CONT:ZZ OPI:M INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
SPE8ED-27-Q-0008
SECTION B
SUPPLY/SERVICE: 8105-01-358-9325 CONT'D
CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT
OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE
MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN
BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN
PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT
TREATMENT OF WPM SHALL BE THE ONLY METHODS
AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.
ADDITIONAL INFORMATION REGARDING DOD'S WPM
REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING
WEBSITE: HTTP://WWW.DSCC.DLA.MIL/DOWNLOADS/
PACKAGING/PALLETIZATIONRQMTWPMCLAUSE.PDF
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
PALLETIZATION SHALL BE IN ACCORDANCE WITH
THE LATEST EDITION OF MIL-STD-147. UNITIZED
LOADS COMMENSURATE WITH THE LEVEL OF PACKING
SPECIFIED IN THE CONTRACT OR ORDER SHALL BE
USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO
ONE DESTINATION EXCEEDS 250 LBS (EXCLUDING THE
PALLET) OR 20 CU FT. LOADS SHALL BE UNITIZED
ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS.
PALLET SHALL HAVE A LENGTH OF 40 INCHES AND A
WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING THE
PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT,
43 INCHES IN LENGTH AND 52 INCHES IN WIDTH.
QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS
THAN 250 LBS OR 20 CUBIC FEET NEED NOT BE
PALLETIZED.
APPLICABLE TO EQUIPMENT ITEMS HAVING A HEIGHT
OF 48 INCHES OR GREATER:
IF A PROPERLY PALLETIZED LOAD (EQUIPMENT ITEM
AND PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT
LIMITATION NEED NOT BE ADHERED TO.
APPLICABLE TO A SINGLE ITEM HAVING DIMENSIONS
EXCEEDING THE MAXIMUM PALLET LOAD LENGTH AND/OR
WIDTH DIMENSIONS:
IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET
LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE
ADHERED TO. CONTACT THE CONTRACTING OFFICER FOR
ADDITIONAL GUIDANCE.
COPIES OF THE LATEST EDITION OF MIL-STD-147 ARE
AVAILABLE FROM DLA DOCUMENT SERVICES, BLDG 4/D,
700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5094.
COPIES ARE ALSO AVAILABLE ONLINE AT
HTTP://QUICKSEARCH.DLA.MIL/
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
SPE8ED-27-Q-0008
SECTION B
SUPPLY/SERVICE: 8105-01-358-9325 CONT'D
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
PACKAGING AND PACKING SHALL BE COMMERCIAL, AS SPECIFIED HEREIN.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER. WHEN REQUIRED, UNIT CONTAINER SHALL CONTAIN INTERNAL FITTINGS, WRAPPING, CUSHIONING, ETC., CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
PALLETIZATION SHALL BE IN ACCORDANCE WITH MIL-STD-147. UNITIZED LOADS SHALL BE USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE DESTINATION EXCEEDS 250 LBS (EXCLUDING THE PALLET) OR 20 CU FT. LOADS SHALL BE UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS. PALLET SHALL HAVE A LENGTH OF 40 INCHES AND A WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING THE PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT, 43 INCHES IN LENGTH AND 52 INCHES IN WIDTH.
QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS THAN 250 LBS OR 20 CUBIC FEET NEED NOT BE PALLETIZED.
IF A PROPERLY PALLETIZED LOAD OF A SINGLE ITEM (EQUIPMENT ITEM AND PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT BE ADHERED TO.
IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE ADHERED TO. CONTACT THE CONTRACTING OFFICER FOR ADDITIONAL GUIDANCE.
AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY BE SUPPLIED.
SPE8ED-27-Q-0008
SECTION B
SUPPLY/SERVICE: 8105-01-358-9325 CONT'D
IN ADDITION TO ALL MARKING REQUIREMENTS
SPECIFIED HEREIN AND IN THE APPLICABLE
SPECIFICATION DOCUMENT, ALL SHIPMENTS TO DLA
DISTRIBUTION LOCATIONS SHALL ALSO REQUIRE
PASSIVE RFID TAGS IN ACCORDANCE WITH DFARS
CLAUSE 252.211-7006.
HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE
TO NSNS IN FSCS 6505/6508/6509/6550.
LABELING AND MARKING. MATERIAL SHALL BE
LABELED AND MARKED IN ACCORDANCE WITH
COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.
MARKING ON EACH UNIT SHALL INCLUDE THE NSN
AND GOVERNMENT QUANTITY AND UNIT OF ISSUE.
HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE
TO NSNS IN FSCs 6505 and 6509.
MARKING ON EACH SHIPPING CONTAINER AND/OR UNITIZED LOAD SHALL BE AS SPECIFIED IN MEDICAL MARKING STANDARD NO. 1 ((MMS NO. 1).
ADDITIONAL MARKINGS SHALL BE SUPPLIED IN ACCORDANCE WITH ALL APPLICABLE REGULATORY REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL HANDLING, I.E., CONTROLLED, PERISHABLE AND HAZARDOUS ITEMS.
APPLICABLE TO ALL SHIPMENTS, EXCEPT SHIPMENTS TO DLA DISTRIBUTION LOCATIONS: AS AN ALTERNATE, FOR SHIPMENTS DIRECTLY TO MEDICAL FACILITIES OF ALL ITEMS EXCEPT PERISHABLE ITEMS AND HAZARDOUS MATERIAL, REQUIRED MARKINGS MAY BE SUPPLIED ON THE DD FORM 250 OR PACKING LIST ACCOMPANYING THE SHIPMENT.
MIL-STD-147 IS AVAILABLE ONLINE AT HTTP://QUICKSEARCH.DLA.MIL/
MMS NO. 1 MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT, ATTN: MEDICAL SUPPLIER OPERATIONS, FSSB (PACKAGING), VIA EMAIL: DSCP.PACKAGING@DLA.MIL. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT http://www.dla.mil/LandandMaritime/Offers/Services/ http://www.dla.mil/LandandMaritime/Offers/Services/ TechnicalSupport/Logistics/Packaging/MedicalPack1.aspx
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
SPE8ED-27-Q-0008
SECTION B
SUPPLY/SERVICE: 8105-01-358-9325 CONT'D
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0002 8105-01-358-9325 40.000 PG $ ______________ $ ______________
BAG,PLASTIC
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 90 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z UNIT CONT:ZZ OPI:M INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT
OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE
MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN
BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN
PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT
TREATMENT OF WPM SHALL BE THE ONLY METHODS
AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.
ADDITIONAL INFORMATION REGARDING DOD'S WPM
REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING
WEBSITE: HTTP://WWW.DSCC.DLA.MIL/DOWNLOADS/
PACKAGING/PALLETIZATIONRQMTWPMCLAUSE.PDF
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
PALLETIZATION SHALL BE IN ACCORDANCE WITH
THE LATEST EDITION OF MIL-STD-147. UNITIZED
LOADS COMMENSURATE WITH THE LEVEL OF PACKING
SPECIFIED IN THE CONTRACT OR ORDER SHALL BE
USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO
ONE DESTINATION EXCEEDS 250 LBS (EXCLUDING THE
PALLET) OR 20 CU FT. LOADS SHALL BE UNITIZED
ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS.
PALLET SHALL HAVE A LENGTH OF 40 INCHES AND A
WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING THE
PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT,
43 INCHES IN LENGTH AND 52 INCHES IN WIDTH.
QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS
THAN 250 LBS OR 20 CUBIC FEET NEED NOT BE
PALLETIZED.
APPLICABLE TO EQUIPMENT ITEMS HAVING A HEIGHT
OF 48 INCHES OR GREATER:
IF A PROPERLY PALLETIZED LOAD (EQUIPMENT ITEM
AND PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT
LIMITATION NEED NOT BE ADHERED TO.
APPLICABLE TO A SINGLE ITEM HAVING DIMENSIONS
EXCEEDING THE MAXIMUM PALLET LOAD LENGTH AND/OR
WIDTH DIMENSIONS:
IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET
LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE
ADHERED TO. CONTACT THE CONTRACTING OFFICER FOR
ADDITIONAL GUIDANCE.
SPE8ED-27-Q-0008
SECTION B
SUPPLY/SERVICE: 8105-01-358-9325 CONT'D
COPIES OF THE LATEST EDITION OF MIL-STD-147 ARE
AVAILABLE FROM DLA DOCUMENT SERVICES, BLDG 4/D,
700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5094.
COPIES ARE ALSO AVAILABLE ONLINE AT
HTTP://QUICKSEARCH.DLA.MIL/
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
PACKAGING AND PACKING SHALL BE COMMERCIAL, AS SPECIFIED HEREIN.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER. WHEN REQUIRED, UNIT CONTAINER SHALL CONTAIN INTERNAL FITTINGS, WRAPPING, CUSHIONING, ETC., CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
PALLETIZATION SHALL BE IN ACCORDANCE WITH
SPE8ED-27-Q-0008
SECTION B
SUPPLY/SERVICE: 8105-01-358-9325 CONT'D
MIL-STD-147. UNITIZED LOADS SHALL BE USED
WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE
DESTINATION EXCEEDS 250 LBS (EXCLUDING THE
PALLET) OR 20 CU FT. LOADS SHALL BE
UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY
PALLETS. PALLET SHALL HAVE A LENGTH OF 40
INCHES AND A WIDTH OF 48 INCHES. PALLET
LOAD, INCLUDING THE PALLET, SHALL NOT EXCEED
54 INCHES IN HEIGHT, 43 INCHES IN LENGTH AND
52 INCHES IN WIDTH.
QUANTITY FOR SHIPMENT TO ONE DESTINATION OF
LESS THAN 250 LBS OR 20 CUBIC FEET NEED NOT
BE PALLETIZED.
IF A PROPERLY PALLETIZED LOAD OF A SINGLE
ITEM (EQUIPMENT ITEM AND PALLET) EXCEEDS 54
INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT
BE ADHERED TO.
IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET
LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE
ADHERED TO. CONTACT THE CONTRACTING OFFICER
FOR ADDITIONAL GUIDANCE.
AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY
BE SUPPLIED.
IN ADDITION TO ALL MARKING REQUIREMENTS
SPECIFIED HEREIN AND IN THE APPLICABLE
SPECIFICATION DOCUMENT, ALL SHIPMENTS TO DLA
DISTRIBUTION LOCATIONS SHALL ALSO REQUIRE
PASSIVE RFID TAGS IN ACCORDANCE WITH DFARS
CLAUSE 252.211-7006.
HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE
TO NSNS IN FSCS 6505/6508/6509/6550.
LABELING AND MARKING. MATERIAL SHALL BE
LABELED AND MARKED IN ACCORDANCE WITH
COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.
MARKING ON EACH UNIT SHALL INCLUDE THE NSN
AND GOVERNMENT QUANTITY AND UNIT OF ISSUE.
HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE
TO NSNS IN FSCs 6505 and 6509.
MARKING ON EACH SHIPPING CONTAINER AND/OR UNITIZED LOAD SHALL BE AS SPECIFIED IN MEDICAL MARKING STANDARD NO. 1 ((MMS NO. 1).
ADDITIONAL MARKINGS SHALL BE SUPPLIED IN ACCORDANCE WITH ALL APPLICABLE REGULATORY REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL HANDLING, I.E., CONTROLLED, PERISHABLE AND HAZARDOUS ITEMS.
APPLICABLE TO ALL SHIPMENTS, EXCEPT SHIPMENTS TO DLA DISTRIBUTION LOCATIONS: AS AN ALTERNATE, FOR SHIPMENTS DIRECTLY TO MEDICAL FACILITIES OF ALL ITEMS EXCEPT PERISHABLE ITEMS AND HAZARDOUS MATERIAL, REQUIRED MARKINGS MAY BE SUPPLIED ON THE DD FORM 250 OR PACKING LIST ACCOMPANYING THE SHIPMENT.
MIL-STD-147 IS AVAILABLE ONLINE AT HTTP://QUICKSEARCH.DLA.MIL/
MMS NO. 1 MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT, ATTN: MEDICAL SUPPLIER OPERATIONS, FSSB (PACKAGING), VIA EMAIL: DSCP.PACKAGING@DLA.MIL. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT http://www.dla.mil/LandandMaritime/Offers/Services/ http://www.dla.mil/LandandMaritime/Offers/Services/ TechnicalSupport/Logistics/Packaging/MedicalPack1.aspx
PKGING DATA MIL-STD-2073-1E
SPE8ED-27-Q-0008
SECTION B
SUPPLY/SERVICE: 8105-01-358-9325 CONT'D
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT
OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE
MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN
BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN
PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT
TREATMENT OF WPM SHALL BE THE ONLY METHODS
AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.
ADDITIONAL INFORMATION REGARDING DOD'S WPM
REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING
WEBSITE: HTTP://WWW.DSCC.DLA.MIL/DOWNLOADS/
PACKAGING/PALLETIZATIONRQMTWPMCLAUSE.PDF
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
PALLETIZATION SHALL BE IN ACCORDANCE WITH
THE LATEST EDITION OF MIL-STD-147. UNITIZED
LOADS COMMENSURATE WITH THE LEVEL OF PACKING
SPECIFIED IN THE CONTRACT OR ORDER SHALL BE
USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO
ONE DESTINATION EXCEEDS 250 LBS (EXCLUDING THE
PALLET) OR 20 CU FT. LOADS SHALL BE UNITIZED
ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS.
PALLET SHALL HAVE A LENGTH OF 40 INCHES AND A
WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING THE
PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT,
43 INCHES IN LENGTH AND 52 INCHES IN WIDTH.
QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS
THAN 250 LBS OR 20 CUBIC FEET NEED NOT BE
PALLETIZED.
APPLICABLE TO EQUIPMENT ITEMS HAVING A HEIGHT
OF 48 INCHES OR GREATER:
IF A PROPERLY PALLETIZED LOAD (EQUIPMENT ITEM
AND PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT
LIMITATION NEED NOT BE ADHERED TO.
APPLICABLE TO A SINGLE ITEM HAVING DIMENSIONS
EXCEEDING THE MAXIMUM PALLET LOAD LENGTH AND/OR
WIDTH DIMENSIONS:
IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET
LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE
ADHERED TO. CONTACT THE CONTRACTING OFFICER FOR
ADDITIONAL GUIDANCE.
COPIES OF THE LATEST EDITION OF MIL-STD-147 ARE
AVAILABLE FROM DLA DOCUMENT SERVICES, BLDG 4/D,
700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5094.
COPIES ARE ALSO AVAILABLE ONLINE AT
HTTP://QUICKSEARCH.DLA.MIL/
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
SPE8ED-27-Q-0008
SECTION B
SUPPLY/SERVICE: 8105-01-358-9325 CONT'D
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
PACKAGING AND PACKING SHALL BE COMMERCIAL, AS SPECIFIED HEREIN.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER. WHEN REQUIRED, UNIT CONTAINER SHALL CONTAIN INTERNAL FITTINGS, WRAPPING, CUSHIONING, ETC., CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
PALLETIZATION SHALL BE IN ACCORDANCE WITH MIL-STD-147. UNITIZED LOADS SHALL BE USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE DESTINATION EXCEEDS 250 LBS (EXCLUDING THE PALLET) OR 20 CU FT. LOADS SHALL BE UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS. PALLET SHALL HAVE A LENGTH OF 40 INCHES AND A WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING THE PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT, 43 INCHES IN LENGTH AND 52 INCHES IN WIDTH.
QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS THAN 250 LBS OR 20 CUBIC FEET NEED NOT BE PALLETIZED.
IF A PROPERLY PALLETIZED LOAD OF A SINGLE ITEM (EQUIPMENT ITEM AND PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT BE ADHERED TO.
SPE8ED-27-Q-0008
SECTION B
SUPPLY/SERVICE: 8105-01-358-9325 CONT'D
IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET
LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE
ADHERED TO. CONTACT THE CONTRACTING OFFICER
FOR ADDITIONAL GUIDANCE.
AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY
BE SUPPLIED.
IN ADDITION TO ALL MARKING REQUIREMENTS
SPECIFIED HEREIN AND IN THE APPLICABLE
SPECIFICATION DOCUMENT, ALL SHIPMENTS TO DLA
DISTRIBUTION LOCATIONS SHALL ALSO REQUIRE
PASSIVE RFID TAGS IN ACCORDANCE WITH DFARS
CLAUSE 252.211-7006.
HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE
TO NSNS IN FSCS 6505/6508/6509/6550.
LABELING AND MARKING. MATERIAL SHALL BE
LABELED AND MARKED IN ACCORDANCE WITH
COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.
MARKING ON EACH UNIT SHALL INCLUDE THE NSN
AND GOVERNMENT QUANTITY AND UNIT OF ISSUE.
HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE
TO NSNS IN FSCs 6505 and 6509.
MARKING ON EACH SHIPPING CONTAINER AND/OR UNITIZED LOAD SHALL BE AS SPECIFIED IN MEDICAL MARKING STANDARD NO. 1 ((MMS NO. 1).
ADDITIONAL MARKINGS SHALL BE SUPPLIED IN ACCORDANCE WITH ALL APPLICABLE REGULATORY REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL HANDLING, I.E., CONTROLLED, PERISHABLE AND HAZARDOUS ITEMS.
APPLICABLE TO ALL SHIPMENTS, EXCEPT SHIPMENTS TO DLA DISTRIBUTION LOCATIONS: AS AN ALTERNATE, FOR SHIPMENTS DIRECTLY TO MEDICAL FACILITIES OF ALL ITEMS EXCEPT PERISHABLE ITEMS AND HAZARDOUS MATERIAL, REQUIRED MARKINGS MAY BE SUPPLIED ON THE DD FORM 250 OR PACKING LIST ACCOMPANYING THE SHIPMENT.
MIL-STD-147 IS AVAILABLE ONLINE AT HTTP://QUICKSEARCH.DLA.MIL/
MMS NO. 1 MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT, ATTN: MEDICAL SUPPLIER OPERATIONS, FSSB (PACKAGING), VIA EMAIL: DSCP.PACKAGING@DLA.MIL. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT http://www.dla.mil/LandandMaritime/Offers/Services/ http://www.dla.mil/LandandMaritime/Offers/Services/ TechnicalSupport/Logistics/Packaging/MedicalPack1.aspx
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
SPE8ED-27-Q-0008
SECTION B
SUPPLY/SERVICE: 8105-01-358-9325 CONT'D
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7018161178 0001 N/A N/A N/A 03/16/2027
0002 7013632103 0001 N/A N/A N/A 04/08/2026

SPE8ED-27-Q-0008 NSN/Part Number: 8105-01-358-9325 Quantity: 52 PG Purchase Request: 7018161178QTY: 52 Delivery: 90 days ADO