This Solicitation opportunity from Iowa was posted on April 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Bakery Sheet Roller

Closed

B042726State & Local

Submission Closed05/08/2026, 07:04:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE3SE-26-T-1339

Solicitation SPE3SE-26-T-1339 is a Request for Quotations issued by the DLA Troop Support Subsistence FSE Supply Chain for the procurement of three electric conveyor toasters, specifically Hatco Corp part number TQ-400 (NSN 7310-01-560-4677). The required equipment must feature a continuous duty cycle, electric heating elements, a nominal toasting capacity of 360 slices per hour, and operate on a minimum of 120 volts AC at 60 hertz. Physical dimensions are specified as 14.5 inches wide, 14.875 inches high, and 17.75 inches deep. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional components like batteries or sensors. The contract requires delivery to the PAARNG Training Center in Annville, Pennsylvania, with a required delivery date of September 30, 2026, and a delivery window of 20 days after order. Shipping must be handled via traceable means, excluding parcel post, with FOB, inspection, and acceptance all set at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, though DLA Master List technical and quality requirements take precedence. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. Quotes must be submitted through the DIBBS system.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Supply of Plain, Self-Aligning Bearings (NSN 3120003246626)This subcontract involves the supply of 60 plain, self-aligning bearings, identified by NSN 3120003246626, to prime contractors supporting the DLA Weapons Support ASC Commodities Division within the Department of Defense. The scope of work requires the delivery of these units in strict accordance with military specifications, specifically mandating packaging per MIL-STD-2073-1E and marking per MIL-STD-129. The project falls under NAICS code 333241 and is designated for performance in San Diego, California. Interested parties must adhere to the timeline established by the posting date of October 1, 2026, with a response deadline set for October 9, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Flexible Shaft Coupling Supply (NSN 3010008572090)This subcontract involves the supply of 376 flexible shaft couplings for prime contractors supporting DLA Land and Maritime projects. The contractor is responsible for manufacturing or sourcing components that strictly adhere to the technical specifications for NSN 3010008572090. All deliverables must be packaged and palletized according to RP001 and marked in compliance with MIL-STD-129 military standards. The project is managed under the Department of Defense Land Supply Chain, with the place of performance located in Tracy, California.

POSTED

DEADLINE

Edgefinder Set SupplierThis subcontract involves the supply of 4-piece Edgefinder Sets to prime contractors supporting DLA Distribution San Joaquin. The supplier is responsible for manufacturing or sourcing precision machining tools that strictly adhere to the DLA Master List of Technical and Quality Requirements RA001. Additionally, the contractor must ensure all items are packaged according to RP001 standards and that government identification is removed in compliance with RQ011. The contract is associated with NAICS code 333241 and is managed under the Department of Defense for performance in Tracy, California. Interested parties must note the response deadline of October 13, 2026, to provide the required precision tooling sets.

POSTED

DEADLINE

Supply of Commercial Hot Dog Grill (NSN 7310-01-525-4341)This subcontract involves the procurement of one Commercial Off-The-Shelf hot dog grill matching NSN 7310-01-525-4341 to support prime contractors for the Department of Defense Subsistence FSE Supply Chain. The selected provider must deliver the equipment along with a complete technical data package for evaluation, ensuring all items are marked according to MIL-STD-130N and MIL-STD-129 standards. Additionally, the contractor is responsible for providing all necessary Material Safety Data Sheets and hazard labels. The project falls under NAICS code 333241 and will be performed in Indianapolis. Interested parties should note the tight response window, with the solicitation posted on October 1, 2026, and a response deadline of October 5, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Supply of Hook Block Assembly (NSN 3940-01-626-2261)This subcontract involves the manufacture and supply of one Hook Block Assembly (NSN 3940-01-626-2261) for prime contractors working on Department of Defense procurement projects. The assembly must be produced in strict accordance with TDP Rev A Gen 1, Basic Drawing NR 53711 7563785 Revision NR F, and Part Piece Number 7563785 PC153. Quality control measures are governed by the DLA Master List RA001 to ensure all technical specifications are met. The contractor is responsible for the final delivery of the packaged and marked assembly, adhering to MIL-STD-129 and MIL-STD-2073-1E standards for marking and packaging. This project falls under NAICS code 333241 and is managed by the Department of Defense, with the place of performance located at FPO 96694.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE3SE-27-T-0003

Solicitation SPE3SE-27-T-0003 is a total small business set-aside issued by the DLA Troop Support Subsistence FSE Supply Chain for the procurement of two convection steamers, part number 24-CGA-10.2, NSN 7310-01-387-4560. The requirement is for delivery to Camp Edwards Training Site in Buzzards Bay, Massachusetts, with a required delivery date of October 2, 2026, and a delivery window of 20 days after order. The contract specifies FOB Destination for both inspection and acceptance. Compliance requirements include packaging according to ASTM D3951 and RP001, with marking and labeling per MIL-STD-129. Shipping must be conducted via traceable means, as parcel post is prohibited. The procurement is subject to various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS), and payment processing will be managed electronically via the Wide Area WorkFlow (WAWF) system.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE3SE-27-T-0001

Solicitation SPE3SE-27-T-0001 is a fixed-price request for quotation issued by the Department of Defense, specifically the DLA Troop Support Subsistence FSE Supply Chain, for the procurement of one commercial off-the-shelf hot dog grill, NSN 7310-01-525-4341. The item is to be delivered FOB Destination to Indianapolis, Indiana, within 20 days after order. Because there is no approved technical data package available from DLA Troop Support, offerors must provide a complete data package for evaluation. Alternate parts and surplus materials will not be accepted. The contract mandates strict adherence to various technical and quality standards, including MIL-STD-129 for marking and labeling, MIL-STD-130N for identification marking, and ASTM D3951 for packaging, with DLA Master List requirements taking precedence. Palletization must follow RP001 guidelines. Environmental and safety restrictions prohibit the intentional addition of mercury and the use of Class I ozone-depleting substances. Compliance with the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity requirements is required. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE3SE-27-T-0004

Solicitation SPE3SE-27-T-0004 is a federal procurement issued by the DLA Troop Support Subsistence FSE Supply Chain for one ice machine auger, part number A38071-021, manufactured by Scotsman Industries Inc. The requirement is identified by NSN 4110-01-602-3956 and is designated for delivery to the USS Harrisburg LPD-30. The original required delivery date is October 2, 2026, with a delivery lead time of five days after order. Inspection and acceptance will occur at the destination, and the contractor is required to use Wide Area WorkFlow for electronic invoicing and payment requests. The contract mandates strict adherence to DLA packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Special material restrictions prohibit the intentional addition of mercury or mercury-containing compounds to the hardware. Compliance is required with various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, safeguarding of covered defense information, and prohibitions on hexavalent chromium. Alternate parts and surplus materials are generally not accepted for this acquisition.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Aircraft Maintenance Fixture ManufacturingThis subcontract involves the fabrication of three precision maintenance fixtures designed for KC-135 Spoiler Actuator testing on military aircraft projects. The selected provider will manufacture these fixtures based on provided technical data or through reverse engineering, ensuring all components meet strict fit, form, and function requirements. Production must utilize precision machining and aerospace-grade materials in compliance with AS9100 or ISO 9001 quality standards. Managed by the Department of Defense under agency FA8517 Afsc Pzaac, the work will be performed in Warner Robins, Georgia. The project falls under NAICS code 333241, with a response deadline set for October 22, 2026.

POSTED

DEADLINE

Supply of Vehicular Component Boots (NSN 2530-01-420-7580)This subcontract involves the sourcing and manufacture of 101 units of vehicular component boots, identified by NSN 2530-01-420-7580, for prime contractors supporting Department of Defense supply contracts under the Land Supplier Opns Vehicle Spt agency. The performance of the contract will take place in New Cumberland, Pennsylvania, with delivery terms set as FOB Origin. The contractor is required to adhere to strict military standards, specifically performing packaging according to MIL-STD-2073-1E and RP001, and marking in accordance with MIL-STD-129. Additionally, the provider must ensure full compliance with DLA RA001 and DFARS 252.223-7008 regarding the restrictions and management of Hexavalent Chromium.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Bearing Ball Retainer SupplierThis subcontract opportunity with the Department of Defense ASC Commodities Division seeks a supplier to provide precision-manufactured ball bearing retainers for prime contractors. The selected provider must manufacture or source retainers that adhere to NSN 0123-98-530, FSC 3110, and L31 Additive Manufacturing standards. Production must utilize precision machining or additive manufacturing equipment to ensure all physical deliverables meet the dimensional standards set by the Engineering Support Activity. The contract falls under NAICS code 333241 and requires strict compliance with 29 CFR 1910.1200 safety regulations. Interested parties must submit their responses by October 7, 2026, following the posting date of September 29, 2026.

ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in 4 days

AI Contract Overview

Mount Pleasant Correctional Facility is seeking pricing for an ACME RS88 Rol-Sheeter or an equivalent model. The equipment must feature a 24-inch roller width and include a conveyor table measuring 3 feet long by 24 inches wide. Additional required specifications include an automatic shut-off system across the rollers, a rear safety switch, a saddle or molding attachment, two curling chains, and variable speed control to ensure operational flexibility and safety. The solicitation, titled "Bakery Sheet Roller," was posted on April 29, 2026, and responses are due by May 8, 2026. The request is managed by the SLED organization within the Iowa Corrections Department, specifically tied to the Mount Pleasant facility located in Henry County, Iowa. Interested parties can contact Shelly Masterson for further information or submit bids through the provided online portal. The procurement emphasizes safety features, precise dimensions, and operational adaptability to meet the facility's baking equipment needs.

General Info

Mount Pleasant seeks bids for ACME RS88 Rol-Sheeter with safety features, conveyor, variable speed.

Agency

Iowa → Corrections Mt Pleasant

NAICS

333241 - Food Product Machinery Manufacturing

Place of Performance

Henry County, IA, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedApr 29

Solicitation

Response DeadlineMay 8

Deadline has passed

Submission Closed

05/08/2026, 07:04:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyIowa → Corrections Mt Pleasant

Contacts1 person available

OfficeMount Pleasant, IA, 52641, USA

Organization / AgencyIowa → Corrections Mt Pleasant

Office AddressMount Pleasant, IA, 52641, USA

Contacts

Shelly Masterson

contact@example.gov

+1 (555) 000-0000

Full Description

Mount Pleasant Correctional Facility is requesting pricing on an ACME (or equivalent) RS88 Rol-Sheeter with 3' table. The sheeter must have a 24" roller width. The sheeter must have a 3' long and 24" wide conveyor table Automatic shut-off across rollers Rear safety switch, saddle/molding attachment Two curling chains Variable speed control

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS