Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Ball Bearing Supply and Compliance Packaging

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of twenty-six units of a duplex ball bearing identified by NSN 3110001566745, with strict adherence to all military packaging, labeling, and preservation requirements as dictated by MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129 standards. Full compliance with these regulations ensures the components are properly protected, documented, and prepared for military logistics and operational use. The solicitation is issued under a subcontract classification by the ASC Commodities Division within the Department of Defense, targeting suppliers capable of meeting exacting defense specifications. The bid must be submitted by July 30, 2026, with the contract opportunity posted on July 22, 2026, under the NAICS code 332998 for other fabricated metal product manufacturing. Performance of the contract is designated to occur in Jacksonville, Florida, with a ZIP code of 32212-0103. Suppliers are directed to the official DIBBS platform via the provided link to access all relevant documentation and submission instructions. The requirement reflects a focused procurement effort to secure critical bearing components with guaranteed readiness for military deployment under standardized defense logistics protocols.

General Info

Supply 26 duplex ball bearings per military standards for Jacksonville, Florida delivery by July 30, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332998 - Enameled Iron and Metal Sanitary Ware ManufacturingView NAICS

Place of Performance

JACKSONVILLE, FL, 32212-0103, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 26 units of a duplex ball bearing (NSN 3110001566745) with full compliance to military packaging, labeling, and preservation standards including MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129.

Similar Contracts

Same NAICS industry code

Industrial Supplies Provision – Bearings, Fasteners, and Mechanical ComponentsThe contract involves the supply of industrial mechanical components including bearings, fasteners, bolts, and nuts that must comply with federal and military specifications, ensuring rigorous quality and performance standards. Traceability requirements are mandatory to maintain full documentation of component origins and manufacturing processes, while hazard communication protocols must be strictly followed to ensure safety and regulatory alignment. All items are intended for use within Department of Defense operations, specifically at the New Cumberland facility with a ZIP code of 17070-5002. The solicitation, identified by the number SPE7MC26T151K, was posted on July 23, 2026, with responses due by August 3, 2026. This is a subcontract opportunity under the NAICS code 332998, which categorizes it as other fabricated metal product manufacturing. The contracting authority is the DDSP New Cumberland Facility, operating under the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Adjustable Linkage Component (NSN 2815011808438)The contract calls for the procurement and delivery of one adjustable linkage component identified by NSN 2815011808438, manufactured to meet military specifications and packaged in accordance with required defense standards. The item must be delivered FOB destination to USS SAN ANTONIO (LPD 17), with the place of performance listed as FPO, ZIP code 09587. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses qualify to respond, as defined by the SBA and FAR 19.5. The NAICS code 332998 applies, covering other fabricated metal product manufacturing, indicating the component is a specialized metal assembly not falling under more specific categories. The posting date is July 22, 2026, with a response deadline of August 3, 2026, leaving a three-week window for bids. The contracting activity is under the Land Supply Chain organization within the Department of Defense. While no specific point of contact or detailed office address is provided, the procurement is hosted via the DIBBS system, and interested parties must access the official solicitation page through the provided UI link. The requirement is singular and targeted, emphasizing precise compliance with military standards and delivery to an active naval vessel, indicating the component supports critical operational systems aboard the USS SAN ANTONIO.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Aerospace Assembly ManufacturingThe contract requires the manufacture and delivery of a precision aerospace assembly identified as 'STOP, ASSEMBLY' with National Stock Number 2915012037055, adhering strictly to military specifications for quality, packaging, and marking. This is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, with performance required at a designated location in New Cumberland, Pennsylvania, 17070-5002. The work falls under NAICS code 332998, which pertains to other fabricated metal product manufacturing, and all deliverables must meet rigorous defense industry standards to ensure operational reliability and compatibility. Responses are due by July 30, 2026, with the solicitation posted on July 22, 2026, indicating a seven-day window for submissions. The contract is classified as a subcontract, meaning the offeror is expected to operate under the authority of a prime contractor or broader procurement structure. Although no specific set-aside designation is provided, compliance with military-grade quality control, traceability, and labeling requirements is mandatory. The full details and submission portal are accessible via the DIBBS platform using the provided URL.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Seal Replacement Parts Kit Manufacturing and Assembly

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Ball Bearing Supply (Annular Type)The contract specifies the supply of 91 annular ball bearings, all required to meet military-compliant standards for packaging, preservation, and marking to ensure durability and traceability under operational conditions. These components are critical for defense systems and must be delivered in full compliance with applicable military specifications to guarantee performance and reliability in demanding environments. The procurement is structured as a subcontract under the Department of Defense’s ASC Commodities Division, with performance location designated at Tinker Air Force Base, Oklahoma, and the delivery window tightly aligned with the response deadline of July 30, 2026. The North American Industry Classification System code 332998 identifies this as a specialty industrial manufacturing activity, emphasizing the technical precision and regulatory adherence expected from the vendor. All units must be properly documented, preserved against corrosion or damage, and externally marked to meet DoD logistics and inventory requirements.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Hydraulic Piston ManufacturingThe contract calls for the manufacture of seven precision hydraulic pistons designed for use in Aircraft Launch and Recovery Equipment, with all work required to strictly comply with military specifications. Each piston must be produced under rigorous configuration control and full traceability protocols to ensure compliance, quality, and long-term maintainability in operational military environments. The production process must account for material sourcing, dimensional tolerances, surface finishes, and testing procedures that align with defense industry standards, ensuring the components can withstand extreme operational stresses. This is a total small business set-aside under the SBA program, classified under NAICS code 332998, and issued as a subcontract by the Department of Defense through its Nuclear Reactor Program. The solicitation opened on July 22, 2026, with responses due by August 5, 2026. All work must be performed by a certified small business, and performance is expected to meet the stringent demands of naval aviation systems. The contract is available through the DIBBS platform with the solicitation number SPE7M226Q0649, though specific performance location and point of contact details are not provided in the posting.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of Surplus Military Thrust Washer BearingsThe contract specifies the procurement and delivery of 21 new, unused thrust washer bearings identified by NSN 3110-01-085-8435, sourced exclusively from U.S. or qualifying foreign suppliers. These components must fully comply with applicable military specifications and originate as Government surplus, ensuring they meet established quality and performance standards for military use. The acquisition is categorized as a subcontract under NAICS code 332998 and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 21, 2026, with no set-aside designation or specific place of performance details provided, and all deliveries are expected to align with government surplus inventory protocols.

Defense Logistics Agency

POSTED

DEADLINE

Precision Shaft Assembly Manufacturing

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Precision Manufacturing of Support Assembly Bearing

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Delivery of 'SEAL, PLAIN ENCASED' ComponentThe contract requires the manufacture, packaging, marking, and delivery of a single 'SEAL, PLAIN ENCASED' component identified by NSN 5330-01-714-1704, adhering strictly to military specifications. All work must comply with ITAR and EAR regulations, and the component must be packaged in accordance with MIL-STD standards to ensure secure and standardized handling for military use. The delivery deadline is set for 60 days from award, emphasizing timely fulfillment to support operational readiness. The solicitation is classified as a subcontract under NAICS code 332998 and is managed by the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT office, with performance required at Mechanicsburg, Pennsylvania, ZIP 17050-2411. The response deadline for submissions is July 28, 2026, following a posting date of July 21, 2026, and all parties must be prepared to meet rigorous defense contracting requirements.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Precision Machining and Assembly of Rotor Disc Component

Defense Logistics Agency

POSTED

DEADLINE

Supply of Special Seal (NSN 5330011922037)The contract requires the supply and delivery of ten units of a specialized mechanical seal identified by NSN 5330011922037 and Part Number 5405392 to a U.S. military location in Europe. Delivery must be completed no later than July 31, 2026, under FOB Destination terms, meaning the vendor assumes all responsibility and costs until the goods reach the designated military destination. Strict adherence to Defense Logistics Agency packaging, marking, and invoicing specifications is mandatory to ensure compliance with military logistics requirements. The contract is classified as a subcontract under NAICS code 332998 and is managed by the Defense Logistics Agency on behalf of the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Hazard Communication Compliance (Hazardous Materials Documentation)The contract requires the preparation and submission of Material Safety Data Sheets and hazard labels for all hazardous materials used in production or plating operations, ensuring full compliance with OSHA’s Hazard Communication Standard under 29 CFR 1910.1200. This subcontract is issued by the ASC Commodities Division under the Department of Defense and targets service providers capable of accurately documenting chemical hazards in accordance with federal safety regulations. The work must be completed and submitted by the response deadline of July 31, 2026, following the solicitation posted on July 24, 2026. The North American Industry Classification System code 541690 indicates this is a professional, scientific, and technical service related to other scientific and technical consulting services, suggesting the need for specialized expertise in chemical safety documentation. Performance location details are unspecified, and no set-aside status or point of contact information is provided, indicating a broad eligibility for qualified subcontractors to respond.

Other Scientific and Technical Consulting Services

POSTED

about 13 hours ago

DEADLINE

Military-Compliant Packaging and MarkingThe contract requires complete packaging, labeling, and barcoding of delivered screws in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all items meet military grade requirements for durability, identification, and traceability. This includes the application of 2D Data Matrix barcodes and accurate NSN marking on each unit, enabling seamless logistics and inventory tracking across defense supply chains. The work must be executed with precision to meet federal specifications for military hardware handling and documentation. This is a subcontract opportunity posted by the ASC COMMODITIES DIVISION under the Department of Defense, with a response deadline of July 31, 2026. The NAICS code 493190 indicates the scope falls under Other Support Activities for Transportation, emphasizing the logistical and packaging nature of the services. The place of performance and point of contact details are not specified, but interested parties must adhere to all technical and procedural requirements outlined in the referenced military standards to qualify for award. The solicitation is accessible through the DIBBS system at the provided URL.

Other Warehousing and Storage

POSTED

about 13 hours ago

DEADLINE

Precision Fastener Manufacturing – Hexagon Cap ScrewsThe contract calls for the manufacture of eight units of hexagon cap screws designated as NSN 5305-01-698-5982, with specifications of M12x70-10.9-ZN5/AN, requiring full compliance with ISO 4017 Revision 6 and applicable military standards. These fasteners must meet exacting quality and performance criteria to ensure reliability in defense applications, with the material finish and mechanical properties defined by the 10.9 grade strength and zinc coating. The work is being procured as a subcontract under the Department of Defense’s ASC Commodities Division, with the NAICS code 332722 indicating classification within screw, bolt, and fastener manufacturing. The solicitation was posted on July 24, 2026, with a response deadline of July 31, 2026, and all production and delivery must align with the military’s strict supply chain protocols. The place of performance and point of contact details are not provided, but the contract can be accessed through the DIBBS portal for further procedural guidance.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

Counterfeit Electronic Parts Prevention ComplianceThis contract requires strict adherence to counterfeit electronic parts prevention protocols under FAR 52.246-7007, mandating comprehensive supply chain traceability to ensure no counterfeit components are introduced into associated systems. All subcontractors must implement and maintain verified processes to authenticate parts, document origin and chain of custody, and comply with Defense Department standards for procurement integrity throughout the lifecycle of delivered items. The requirement applies to all tiers of the supply chain and necessitates documented evidence of compliance upon request. The solicitation, issued by the ASC Commodities Division of the Department of Defense under NAICS code 423830, is classified as a subcontract with a response deadline of July 31, 2026. While no specific set-aside provisions or point of contact are provided, the place of performance and organizational details remain undefined in the posted data. All participants must access the official DIBBS portal via the provided link to review full terms and submit responses in alignment with the mandatory compliance framework established by the regulation.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

Quality Inspection & Acceptance SamplingThis contract requires the performance of quality inspections using MIL-STD-1916 sampling procedures to ensure fasteners meet specified dimensional, material, and finish requirements. The work involves rigorous verification against established military standards to guarantee compliance and consistency in product quality. The inspection process is critical for maintaining the integrity of components used in defense-related applications, with a focus on statistical sampling to determine acceptability without full lot testing. The contract is classified as a subcontract under NAICS code 541380 and is issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 24, 2026, with a response deadline of July 31, 2026. The place of performance and point of contact details are not specified, but the action is accessible through the DIBBS system via the provided URL. All respondents must be prepared to execute the inspection protocol in full alignment with MIL-STD-1916 and deliver documentation demonstrating adherence to the technical specifications outlined for fastener acceptance.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

International Freight & Logistics to JordanThe contract requires the arrangement of FOB Origin international freight and logistics services to deliver goods to Prince Hassan Air Base in Jordan, with full responsibility for export documentation, customs clearance, and compliance with Department of Defense delivery requirements. The scope encompasses end-to-end logistics coordination from the point of origin through final delivery, ensuring all regulatory and military standards are met for transportation into a sensitive DOD facility. All phases of the shipment must adhere to U.S. export laws and joint DOD protocols for international military logistics. The solicitation is classified as a subcontract under NAICS code 488510 for other support activities related to air transportation, with a response deadline of July 31, 2026, and a posting date of July 24, 2026. The procuring entity is the ASC Commodities Division under the Department of Defense, and no set-aside provisions are indicated. Although specific contact or performance location details are not provided, full compliance with DOD delivery protocols, including security, tracking, and documentation, is mandatory. Bidders must demonstrate capability in handling military logistics to the Middle East with proven experience in customs clearance and international FOB origin shipments.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Hazardous Materials Packaging & Labeling ComplianceThe contract requires compliant labeling and packaging of fasteners coated with hazardous materials, ensuring adherence to OSHA’s Hazard Communication Standard, the Globally Harmonized System of Classification and Labeling of Chemicals, and MIL-STD-129 military packaging standards. All deliverables must meet strict regulatory requirements for hazard identification, warning statements, pictograms, signal words, and container labeling, with packaging engineered to protect contents during transport and storage while maintaining full visibility and legibility of required markings. The work falls under NAICS code 561910 and is issued as a subcontract by the ASC Commodities Division of the Department of Defense, with responses due by July 31, 2026. Performance location details are not specified, but full compliance with federal and military standards is mandatory for acceptance.

Packaging and Labeling Services

POSTED

about 13 hours ago

DEADLINE

Precision Fastener Manufacturing & SupplyThe contract calls for the manufacture and supply of a hex cap screw identified by NSN 5305-01-698-5982, requiring strict adherence to military specifications covering material composition, thread profile, head dimensions, and surface finish. The product must meet exacting standards for performance and durability in defense-related applications, ensuring compatibility and reliability in critical military systems. The subcontract is issued by the ASC Commodities Division under the Department of Defense, with a posted date of July 24, 2026, and a response deadline of July 31, 2026. The North American Industry Classification System code 332722 indicates the work falls within the manufacturing of screw, nut, and bolt products, and the place of performance is not specified, allowing flexibility for qualified suppliers to propose their facilities while maintaining compliance with all technical and quality requirements.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supply Chain Compliance and Documentation ServicesThis contract requires comprehensive supply chain compliance services to ensure adherence to critical defense regulations including DFARS, FAR, counterfeit parts prevention, and cybersecurity standards for defense contractors. The work involves managing documentation and operational controls to meet stringent federal requirements throughout the entire procurement and production lifecycle, with a focus on identifying, mitigating, and reporting risks related to illicit or non-compliant components. All activities must be performed in alignment with current defense contracting protocols and must be delivered by a small business as this is a total small business set-aside under SBA guidelines, with the NAICS code 541611 indicating management, scientific, and technical consulting services. The solicitation was posted on July 24, 2026, and responses are due by August 7, 2026, under the auspices of the ASC Commodities Division within the Department of Defense. The place of performance and specific location details are not provided, indicating the work may be performed remotely or at multiple secured sites as needed by the contractor. The contract type is a subcontract, meaning the successful bidder will be supporting a prime contractor or larger entity operating under the broader defense acquisition structure. Compliance with cybersecurity requirements is integral, and all documentation must be accurate, traceable, and auditable to meet federal oversight expectations without reliance on external file sources or proprietary systems beyond those established by governing defense regulations.

Administrative Management and General Management Consulting Services

POSTED

about 13 hours ago

DEADLINE

Hazardous Material Packaging and Labeling ServicesThe contract seeks a small business to design and execute military-compliant packaging, preservation, labeling, and barcoding for hazardous material spill kits in accordance with defense standards. The work involves ensuring all components meet strict regulatory and operational requirements for transport, storage, and field use by military personnel, with special emphasis on safety, durability, and traceability through barcoded identification. The requirement is structured as a subtotal small business set-aside under NAICS code 561910, reserved exclusively for small businesses as defined by SBA regulations, limiting eligibility to firms that qualify under the small business size standards for this industry. The solicitation was posted on July 24, 2026, with a firm response deadline of August 7, 2026, and is administered by the ASC Commodities Division under the Department of Defense. The place of performance and exact delivery locations are not specified, indicating flexibility or eventual determination by the contracting office. All submitted proposals must demonstrate proven capability in military-grade packaging systems and compliance with applicable federal and defense regulations, including handling, marking, and documentation of hazardous materials. The contract will be executed as a subcontract, meaning the awardee may work under a prime contractor or directly with the agency depending on procurement structure.

Packaging and Labeling Services

POSTED

about 13 hours ago

DEADLINE

Sorbent Material SupplyThe contract titled Sorbent Material Supply concerns the provision of compliant absorbent materials designed for use in spill kits, specifically oil-only, universal, and chemical absorption products that meet stringent military preservation and environmental standards. These materials are intended for deployment across defense operations where regulatory compliance and operational readiness are paramount, ensuring safe and effective spill response in diverse and demanding environments. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, strictly reserved for small businesses as defined by the Small Business Administration, with the NAICS code 325992 indicating classification under Other Chemical Product and Preparation Manufacturing. The opportunity was posted on July 24, 2026, with a response deadline set for August 7, 2026, and is managed by the ASC Commodities Division under the Department of Defense. While specific performance locations and point of contact details are not provided, the contract emphasizes adherence to federal procurement guidelines and requires vendors to meet exacting technical specifications for absorbency, durability, and environmental safety. Bidders must be certified small businesses capable of fulfilling volume requirements consistently and maintaining compliance with military-grade preservation protocols throughout the supply chain. The solicitation is accessible via the DIBBS platform for registered contractors seeking to participate in this defense-related procurement.

Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

about 13 hours ago

DEADLINE

Spill Kit Manufacturing and AssemblyThe contract calls for the full assembly of hazardous material spill cleanup kits designed to meet stringent military and OSHA standards, encompassing every phase from sourcing raw components to final packaging, preservation, and labeling. All kits must be manufactured and assembled to ensure compliance with regulatory requirements for safety, durability, and effectiveness in emergency spill response scenarios. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 339920 indicating classification under Other Miscellaneous Manufacturing. The solicitation was posted on July 24, 2026, with responses due by August 7, 2026, and is managed by the ASC Commodity Division under the Department of Defense. The place of performance and contact details are not specified, but all work must align with federal procurement guidelines.

Sporting and Athletic Goods Manufacturing

POSTED

about 13 hours ago

DEADLINE