Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Fastener Manufacturing – Hexagon Cap Screws

Active

Federal

Response Deadline07/31/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture of eight units of hexagon cap screws designated as NSN 5305-01-698-5982, with specifications of M12x70-10.9-ZN5/AN, requiring full compliance with ISO 4017 Revision 6 and applicable military standards. These fasteners must meet exacting quality and performance criteria to ensure reliability in defense applications, with the material finish and mechanical properties defined by the 10.9 grade strength and zinc coating. The work is being procured as a subcontract under the Department of Defense’s ASC Commodities Division, with the NAICS code 332722 indicating classification within screw, bolt, and fastener manufacturing. The solicitation was posted on July 24, 2026, with a response deadline of July 31, 2026, and all production and delivery must align with the military’s strict supply chain protocols. The place of performance and point of contact details are not provided, but the contract can be accessed through the DIBBS portal for further procedural guidance.

General Info

Eight M12x70-10.9-ZN5/AN hex cap screws for DoD per ISO 4017 Rev 6, due July 31, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of 8 units of SCREW, CAP, HEXAGON H (NSN 5305-01-698-5982), M12x70-10.9-ZN5/AN, compliant with ISO 4017 Rev 6 and military specifications.

Similar Contracts

Same NAICS industry code

Precision Fastener Manufacturing & SupplyThe contract calls for the manufacture and supply of a hex cap screw identified by NSN 5305-01-698-5982, requiring strict adherence to military specifications covering material composition, thread profile, head dimensions, and surface finish. The product must meet exacting standards for performance and durability in defense-related applications, ensuring compatibility and reliability in critical military systems. The subcontract is issued by the ASC Commodities Division under the Department of Defense, with a posted date of July 24, 2026, and a response deadline of July 31, 2026. The North American Industry Classification System code 332722 indicates the work falls within the manufacturing of screw, nut, and bolt products, and the place of performance is not specified, allowing flexibility for qualified suppliers to propose their facilities while maintaining compliance with all technical and quality requirements.

ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

SCREW PAN HDThe contract pertains to the procurement of two screw pan head fasteners with NSN 5305-01-204-6565, under solicitation SPE4A6-26-T-40Z4, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 20 days after award, and the response deadline for submissions is May 11, 2026. The item is classified under NAICS code 332722, and performance is designated for Crane, Indiana, with Erin Edwards as the primary point of contact. All supplies must comply with DLA packaging requirements and incorporate technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, where applicable R or I numbers are binding. The sampling protocol must adhere to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively, and unspecified attributes treated as major unless otherwise defined. Zero non-conformances are mandated for acceptance unless contravened by explicit contract language. Mercury and mercury-containing compounds are strictly prohibited unless functionally necessary in specified items such as batteries, fluorescent lamps, instruments, sensors, or chemical reagents authorized by NAVSEA; in such cases, portable devices must be shockproof and contain a secondary barrier to contain mercury. All hardware must bear proper physical identification as per RQ017, and unauthorized government markings must be removed from non-accepted items under RQ011.

ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

SCREW, CAP, SOCKET HEThe contract seeks the procurement of 200 units of a socket cap screw, part number 567-1004-34, with National Stock Number 5305-00-220-2619, to be delivered FOB origin to Hill Air Force Base, Utah, by November 25, 2025, which is 103 days after award. The supplier must be approved and currently designated as CAGE 25583, L3 Harris Aviation Products Inc., and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, specifically identified by R and I numbers including RC001 for source approval documentation, RQ017 for bare item marking, RP001 for packaging, RQ011 for removal of government identification from non-accepted supplies, and RT001 for measuring and test equipment. Packaging and preservation must conform to MIL-STD-2073-1E and RP001, using preservation method 33 (CLNG/DRY), while marking and barcoding must adhere to MIL-STD-129 with Code 128 or Data Matrix symbols, and hazardous materials must be labeled per 29 CFR 1910.1200. The product must meet quality assurance standards through an inspection system compliant with SAE AS9003 or ISO 9001 tailored to AS9003. The contract prohibits the use of hexavalent chromium and any toxic or hazardous materials unless explicitly authorized, and mandates compliance with export control laws and cybersecurity requirements under DFARS 252.204-7012. Ocean shipments require U.S.-flag vessels unless a waiver is granted 45 days in advance. All deliveries require electronic invoicing via WAWF, and the award will be issued electronically through the DLA Internet Bid Board System. The solicitation incorporates multiple FAR and DFARS clauses applicable to contract type, small business representation, equal opportunity, trafficking prevention, employment verification, sustainable products, and hazardous material management, with deviations authorized for several clauses. Inspection and acceptance occur at origin, and the contractor is responsible for maintaining documentation and compliance with all federal and defense standards throughout production and delivery.

ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

STUD, SHOULDEREDThe contract is for 472 shouldered studs identified by NSN 5307-01-178-7445 under solicitation SPE7LX-26-U-8767, with a total small business set-aside designation and NAICS code 332722. The solicitation was posted on July 9, 2026, with responses due by July 24, 2026, and delivery is required within 118 days after award. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the acquisition size and applicable date—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions follow the RFP issue date unless amended. Packaging must meet DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Documentation for source approval is required, and any non-accepted supplies must have government identification removed. Covered defense information may apply, and the contracting office is under the Strategic Acquisition Program Directorate of the Department of Defense, with Theodore Misiolek designated as the primary point of contact.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 13 hours ago

DEADLINE

SCREW, SHOULDERThe contract solicitation SPE4A6-26-T-07GC seeks 39 shoulder screws with NSN 5305-01-732-8603, to be delivered FOB origin to 25600 S CHRISMAN ROAD, REC WHSE 57, Tracy, CA 95304-5000, with a delivery deadline of 239 days after award, corresponding to March 21, 2027. The item is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging under MIL-STD-2073-1E, marking and labeling per MIL-STD-129 with UCC-128 barcoding, and preservation method 31 (clean and dry, no preservation material). The contract mandates adherence to zero non-conformances during inspection at destination, with sampling governed by MIL-STD-1916 or ASQ H1331 and acceptance levels based on attribute criticality. Technical data associated with the item is controlled under ITAR or EAR, restricting export and disclosures to foreign persons without prior authorization; access is limited to contractors with approved JCP certification, completed DLA export control training, and formal approval from DLA. Compliance with NIST SP 800-171 is required for safeguarding covered defense information, and contractors must report cyber incidents per DFARS 252.204-7012. Hazardous materials must be labeled and documented per OSHA’s Hazard Communication Standard with SDS compliant to Federal Standard No. 313, and contractors must affirm representations regarding small business status, UEI, CAGE codes, and restrictions on former DoD officials’ compensation. Invoicing is solely through Wide Area WorkFlow (WAWF) as mandated by DFARS 252.232-7006, with no Fast Pay or IPP options unless applicable. The solicitation allows for deviation under 2026-00038 for small business representation and includes clauses addressing equal opportunity, whistleblower rights, and unauthorized obligations. No contract type or total value is specified in the provided data, and while the point of contact is Ashley Jones at DLA, no COR, COTR, or PCO details are included, with administrative functions relying on the DD 1155 form.

ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

BOLT, INTERNAL WRENCThe contract pertains to the procurement of three units of an internal wrenching bolt, identified by NSN 5306-01-507-1758 and part number 32-35065, under solicitation SPE4A6-26-T-07DU. Delivery is required within 101 days, with shipment FOB origin and inspection and acceptance occurring at the destination, specifically at the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, including specific preservation methods and container codes, while prohibiting any use of mercury or mercury-containing compounds in preservation, packaging, or marking. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample unless otherwise stated, and attributes are classified with corresponding verification levels. The item is designated as a critical application item, and all requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date. The unit of issue is each, with no quantity variance permitted, and the delivery must be completed by November 3, 2026, despite an original required date of October 14, 2026. Transportation directives and contact information for Debra Fowler at DLA are provided for coordination.

ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

BOLT, EYEThe contract is for the procurement of 30 eye bolts, item part number 106-RSL with NSN 5306016867022, under solicitation SPE4A6-26-T-06WV, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 20 days to a FOB destination location at USNS MT WHITNEY LCC 20, FPO AE 09517-3310, with no quantity variance permitted. The items must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including compliance with MIL-STD-129 for marking and labeling, and DLA Packaging Requirements for palletization. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero non-conformances unless otherwise specified. Attributes are assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. The unit of issue is each (EA), and packaging must reflect the specified Quantity per Unit Pack. Transportation and shipping instructions reference DLAD Proc Notes C19 and C20, and vendors must use VSM for logistics. The original required delivery date is July 9, 2026, and the contract is subject to Covered Defense Information provisions and tailored higher-level quality requirements.

ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

WASHER, BEVELThe contract pertains to the procurement of eight bevel washers identified by NSN 5310-01-658-3478, with a delivery requirement of 20 days after order. The solicitation, issued under number SPE4A6-26-T-06VZ on July 16, 2026, with a response deadline of July 24, 2026, is managed by the ASC Commodities Division of the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with revisions controlled based on the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted items must have government identification removed. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stipulated. Documentation for source approval must meet RC001 requirements, and all work is subject to the specified quality assurance provisions. The primary point of contact is Krystle Bailey, reachable at the provided phone and email.

ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

SCREW, CAP, SOCKET HEThe contract specifies the procurement of 150 socket head cap screws with NSN 5305-01-527-7998 under solicitation SPE4A6-26-T-07EA, issued by the Department of Defense’s ASC Commodities Division. The item must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 packaging guidelines, including proper marking and identification per RQ017. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan with strict acceptance criteria: critical, major, and minor attributes require verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with zero non-conformances permitted in the sample lot unless otherwise directed. The screws are to be delivered FOB origin to the specified recipient warehouse in Tracy, California, with no variance allowed in quantity. Delivery is required within 213 days from the contract date, with a firm need date of February 23, 2027. All packaging must be palletized per DLA requirements and labeled according to the contract's Unit of Issue and Quantity per Unit Pack. Transportation and shipping details are governed by DLAD procedural notes C19 and C20, and the point of contact for inquiries is Antonia Willcox.

ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

SCREW, CAP, HEXAGON HThe contract specifies the procurement of 8 units of a hexagon cap screw, identified by NSN 5305-01-698-5982 and conforming to ISO 4017 Revision 6 dated 06/01/2022 with a size designation of M12x70-10.9-ZN5/AN. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition type. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special markings, and palletization adherence to specified standards. Inspection and acceptance occur at destination, with firm fixed pricing and zero tolerance for quantity variance. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined. The delivery window is 200 days after order date, with the freight destination being Prince Hassan Air Base in Jordan under a shipment RDD 777. The contract is issued under solicitation SPE4A6-26-Q-1208 with a response deadline of July 31, 2026, and the item is sourced for the Royal Jordanian Air Force through the U.S. Department of Defense.

ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

WASHER, CONICALThe contract solicits 2,150 conical washers with part number ST4M159-08 and NSN 5310003520475 under solicitation SPE4A6-26-T-07HU, with delivery required 162 days after award, targeting a need ship date of January 3, 2027, and an original delivery deadline of December 21, 2026. Supplies must be furnished FOB origin, inspected and accepted at the destination, with no variance permitted in quantity. Packaging must adhere to ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, with palletization meeting RP001 standards and all markings complying with MIL-STD-129, including unit of issue and quantity per unit pack at 050. Bare item marking is mandatory per RQ017, with approved part numbers from Simmonds Precision Products Inc, Seastrom Manufacturing Co Inc, and Moeller Manufacturing & Supply, LLC. Mercury or mercury-containing compounds are strictly prohibited unless part of batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents, and portable mercury devices must have shock-proof containment and a secondary barrier as per NAVSEA 5100-003D. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II, or AQLs of 0.1, 1.0, and 4.0 respectively, and unspecified attributes deemed major. Acceptance requires zero non-conformances if using MIL-STD-105/ASQ Z1.4 unless otherwise stated. Government identification must be removed from all non-accepted items, and all materials must be shipped to Hill AFB, Utah, with invoicing submitted via WAWF. The contract incorporates numerous FAR and DFARS clauses including equal opportunity for workers with disabilities, combating human trafficking, employment eligibility verification, sustainable products, hazardous material safety data, NIST SP 800-171 cybersecurity requirements, whistleblower protections, and restrictions on compensation for former DoD officials. Offerors must provide UEI and CAGE codes, certify small business status and socioeconomic designations if applicable, disclose covered telecommunications equipment, and comply with D

ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

SCREW, CAP, HEXAGON HEADThis contract pertains to the procurement of 114 units of a hexagon head cap screw, identified by NSN 5305-01-699-3946 and part number 3001000-160060, supplied by BAE Systems Land & Armaments L.P. The item must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The screw must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly authorized by specification. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including specified methods for preservation, wrapping, and intermediate container use, with labeling conforming to MIL-STD-129 and no special marking required. The product is to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with a delivery window of 165 days from the contract date and a required ship date of January 5, 2027. Quantity tolerance is strictly zero percent variance, and inspection and acceptance occur at the destination. The unit of issue is each, with a unit price of $114.00 and a total contract value of $12,996. Transportation details follow DLAD Proc Notes C19 and C20, and all compliance, marking, and packaging directives are binding and non-negotiable.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 13 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Hazard Communication Compliance (Hazardous Materials Documentation)The contract requires the preparation and submission of Material Safety Data Sheets and hazard labels for all hazardous materials used in production or plating operations, ensuring full compliance with OSHA’s Hazard Communication Standard under 29 CFR 1910.1200. This subcontract is issued by the ASC Commodities Division under the Department of Defense and targets service providers capable of accurately documenting chemical hazards in accordance with federal safety regulations. The work must be completed and submitted by the response deadline of July 31, 2026, following the solicitation posted on July 24, 2026. The North American Industry Classification System code 541690 indicates this is a professional, scientific, and technical service related to other scientific and technical consulting services, suggesting the need for specialized expertise in chemical safety documentation. Performance location details are unspecified, and no set-aside status or point of contact information is provided, indicating a broad eligibility for qualified subcontractors to respond.

Other Scientific and Technical Consulting Services

POSTED

about 13 hours ago

DEADLINE

Military-Compliant Packaging and MarkingThe contract requires complete packaging, labeling, and barcoding of delivered screws in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all items meet military grade requirements for durability, identification, and traceability. This includes the application of 2D Data Matrix barcodes and accurate NSN marking on each unit, enabling seamless logistics and inventory tracking across defense supply chains. The work must be executed with precision to meet federal specifications for military hardware handling and documentation. This is a subcontract opportunity posted by the ASC COMMODITIES DIVISION under the Department of Defense, with a response deadline of July 31, 2026. The NAICS code 493190 indicates the scope falls under Other Support Activities for Transportation, emphasizing the logistical and packaging nature of the services. The place of performance and point of contact details are not specified, but interested parties must adhere to all technical and procedural requirements outlined in the referenced military standards to qualify for award. The solicitation is accessible through the DIBBS system at the provided URL.

Other Warehousing and Storage

POSTED

about 13 hours ago

DEADLINE

Counterfeit Electronic Parts Prevention ComplianceThis contract requires strict adherence to counterfeit electronic parts prevention protocols under FAR 52.246-7007, mandating comprehensive supply chain traceability to ensure no counterfeit components are introduced into associated systems. All subcontractors must implement and maintain verified processes to authenticate parts, document origin and chain of custody, and comply with Defense Department standards for procurement integrity throughout the lifecycle of delivered items. The requirement applies to all tiers of the supply chain and necessitates documented evidence of compliance upon request. The solicitation, issued by the ASC Commodities Division of the Department of Defense under NAICS code 423830, is classified as a subcontract with a response deadline of July 31, 2026. While no specific set-aside provisions or point of contact are provided, the place of performance and organizational details remain undefined in the posted data. All participants must access the official DIBBS portal via the provided link to review full terms and submit responses in alignment with the mandatory compliance framework established by the regulation.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

Quality Inspection & Acceptance SamplingThis contract requires the performance of quality inspections using MIL-STD-1916 sampling procedures to ensure fasteners meet specified dimensional, material, and finish requirements. The work involves rigorous verification against established military standards to guarantee compliance and consistency in product quality. The inspection process is critical for maintaining the integrity of components used in defense-related applications, with a focus on statistical sampling to determine acceptability without full lot testing. The contract is classified as a subcontract under NAICS code 541380 and is issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 24, 2026, with a response deadline of July 31, 2026. The place of performance and point of contact details are not specified, but the action is accessible through the DIBBS system via the provided URL. All respondents must be prepared to execute the inspection protocol in full alignment with MIL-STD-1916 and deliver documentation demonstrating adherence to the technical specifications outlined for fastener acceptance.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

International Freight & Logistics to JordanThe contract requires the arrangement of FOB Origin international freight and logistics services to deliver goods to Prince Hassan Air Base in Jordan, with full responsibility for export documentation, customs clearance, and compliance with Department of Defense delivery requirements. The scope encompasses end-to-end logistics coordination from the point of origin through final delivery, ensuring all regulatory and military standards are met for transportation into a sensitive DOD facility. All phases of the shipment must adhere to U.S. export laws and joint DOD protocols for international military logistics. The solicitation is classified as a subcontract under NAICS code 488510 for other support activities related to air transportation, with a response deadline of July 31, 2026, and a posting date of July 24, 2026. The procuring entity is the ASC Commodities Division under the Department of Defense, and no set-aside provisions are indicated. Although specific contact or performance location details are not provided, full compliance with DOD delivery protocols, including security, tracking, and documentation, is mandatory. Bidders must demonstrate capability in handling military logistics to the Middle East with proven experience in customs clearance and international FOB origin shipments.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Hazardous Materials Packaging & Labeling ComplianceThe contract requires compliant labeling and packaging of fasteners coated with hazardous materials, ensuring adherence to OSHA’s Hazard Communication Standard, the Globally Harmonized System of Classification and Labeling of Chemicals, and MIL-STD-129 military packaging standards. All deliverables must meet strict regulatory requirements for hazard identification, warning statements, pictograms, signal words, and container labeling, with packaging engineered to protect contents during transport and storage while maintaining full visibility and legibility of required markings. The work falls under NAICS code 561910 and is issued as a subcontract by the ASC Commodities Division of the Department of Defense, with responses due by July 31, 2026. Performance location details are not specified, but full compliance with federal and military standards is mandatory for acceptance.

Packaging and Labeling Services

POSTED

about 13 hours ago

DEADLINE

Supply Chain Compliance and Documentation ServicesThis contract requires comprehensive supply chain compliance services to ensure adherence to critical defense regulations including DFARS, FAR, counterfeit parts prevention, and cybersecurity standards for defense contractors. The work involves managing documentation and operational controls to meet stringent federal requirements throughout the entire procurement and production lifecycle, with a focus on identifying, mitigating, and reporting risks related to illicit or non-compliant components. All activities must be performed in alignment with current defense contracting protocols and must be delivered by a small business as this is a total small business set-aside under SBA guidelines, with the NAICS code 541611 indicating management, scientific, and technical consulting services. The solicitation was posted on July 24, 2026, and responses are due by August 7, 2026, under the auspices of the ASC Commodities Division within the Department of Defense. The place of performance and specific location details are not provided, indicating the work may be performed remotely or at multiple secured sites as needed by the contractor. The contract type is a subcontract, meaning the successful bidder will be supporting a prime contractor or larger entity operating under the broader defense acquisition structure. Compliance with cybersecurity requirements is integral, and all documentation must be accurate, traceable, and auditable to meet federal oversight expectations without reliance on external file sources or proprietary systems beyond those established by governing defense regulations.

Administrative Management and General Management Consulting Services

POSTED

about 13 hours ago

DEADLINE

Hazardous Material Packaging and Labeling ServicesThe contract seeks a small business to design and execute military-compliant packaging, preservation, labeling, and barcoding for hazardous material spill kits in accordance with defense standards. The work involves ensuring all components meet strict regulatory and operational requirements for transport, storage, and field use by military personnel, with special emphasis on safety, durability, and traceability through barcoded identification. The requirement is structured as a subtotal small business set-aside under NAICS code 561910, reserved exclusively for small businesses as defined by SBA regulations, limiting eligibility to firms that qualify under the small business size standards for this industry. The solicitation was posted on July 24, 2026, with a firm response deadline of August 7, 2026, and is administered by the ASC Commodities Division under the Department of Defense. The place of performance and exact delivery locations are not specified, indicating flexibility or eventual determination by the contracting office. All submitted proposals must demonstrate proven capability in military-grade packaging systems and compliance with applicable federal and defense regulations, including handling, marking, and documentation of hazardous materials. The contract will be executed as a subcontract, meaning the awardee may work under a prime contractor or directly with the agency depending on procurement structure.

Packaging and Labeling Services

POSTED

about 13 hours ago

DEADLINE

Sorbent Material SupplyThe contract titled Sorbent Material Supply concerns the provision of compliant absorbent materials designed for use in spill kits, specifically oil-only, universal, and chemical absorption products that meet stringent military preservation and environmental standards. These materials are intended for deployment across defense operations where regulatory compliance and operational readiness are paramount, ensuring safe and effective spill response in diverse and demanding environments. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, strictly reserved for small businesses as defined by the Small Business Administration, with the NAICS code 325992 indicating classification under Other Chemical Product and Preparation Manufacturing. The opportunity was posted on July 24, 2026, with a response deadline set for August 7, 2026, and is managed by the ASC Commodities Division under the Department of Defense. While specific performance locations and point of contact details are not provided, the contract emphasizes adherence to federal procurement guidelines and requires vendors to meet exacting technical specifications for absorbency, durability, and environmental safety. Bidders must be certified small businesses capable of fulfilling volume requirements consistently and maintaining compliance with military-grade preservation protocols throughout the supply chain. The solicitation is accessible via the DIBBS platform for registered contractors seeking to participate in this defense-related procurement.

Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

about 13 hours ago

DEADLINE

Spill Kit Manufacturing and AssemblyThe contract calls for the full assembly of hazardous material spill cleanup kits designed to meet stringent military and OSHA standards, encompassing every phase from sourcing raw components to final packaging, preservation, and labeling. All kits must be manufactured and assembled to ensure compliance with regulatory requirements for safety, durability, and effectiveness in emergency spill response scenarios. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 339920 indicating classification under Other Miscellaneous Manufacturing. The solicitation was posted on July 24, 2026, with responses due by August 7, 2026, and is managed by the ASC Commodity Division under the Department of Defense. The place of performance and contact details are not specified, but all work must align with federal procurement guidelines.

Sporting and Athletic Goods Manufacturing

POSTED

about 13 hours ago

DEADLINE

LENS, LIGHTThe contract pertains to the procurement of six units of LENS, LIGHT with NSN 6210-01-551-2854 under solicitation SPE4A6-26-T-07EH, with delivery required within 132 days after award to the DLA Distribution facility in New Cumberland, PA. The items must be furnished FOB origin, with no quantity variance allowed, and are subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E and the DLA Packaging Requirements, using preserved methods specified under QUP 001, with packaging code U and marking per MIL-STD-129 including the fragile designation. The product is prohibited from containing mercury or mercury compounds in any form except for limited functional applications such as fluorescent lamps, which must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. Mercury is also strictly forbidden in preservation, packaging, and marking materials. Items must be marked with the contract number, NAWC CAGE, and part number unless overridden by technical drawings, and must meet NAVAIR aircraft launch and recovery equipment traceability standards. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is mandated, and all technical and quality requirements are aligned with the DLA Master List referenced in the contract. The required delivery date is December 4, 2026.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE