Top

Ballistic Protection Systems (Body Armor)

Active

Federal

Response Deadline08/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of The Interior → Ibc Acq Svcs Directorate (00004)View Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

Set-Aside

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 10

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of The Interior → Ibc Acq Svcs Directorate (00004)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Interior → Ibc Acq Svcs Directorate (00004)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of new ballistic vests certified to NIJ standards for law enforcement use, manufactured in the U.S.

Similar Contracts

Same NAICS industry code

NAICS: 339113

New

DIBBS

Medical Device Manufacturing – Disposable Inspiratory Valves

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Disposable Hypodermic Syringe Supply

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

PAD, HEATING, CHEMICAL

Solicitation # SPE2DH-26-T-5894

The contract pertains to the procurement of disposable heating pads designed for chemical applications, measuring 11 by 4 inches, with a requirement for one hour of uniform heat output that conforms to body contours and does not exceed a maximum temperature of 110 degrees Fahrenheit. Each unit is constructed with a plastic laminated fabric outer case and is packaged in quantities of 24 per package, which serves as the unit of issue. The product is identified by NSN 6530-01-212-5343 with a single package quantity ordered under purchase request 7017796282, and delivery is required within 20 days after award. The solicitation, issued under number SPE2DH-26-T-5894, was posted on August 10, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH through the office at Luke Air Force Base, Arizona. The contract incorporates mandatory technical and quality requirements identified by R and I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The procurement is classified under NAICS code 339113 and is open to federal suppliers. Primary point of contact is Tina Vu, reachable via email and phone provided, with all documentation accessible through the DIBBS portal. The set-aside type is not specified, indicating an open competition for qualified vendors.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

TUBE, FEEDING, SURGICAL

Solicitation # SPE2DS-26-T-327R

The contract specifies the procurement of 2 packages of pediatric nasal feeding tubes, 8 FR, 42 inches long, with a radiopaque distal end for precise location confirmation during surgical use. Each package contains 10 units, and the item is classified under NSN 6515-01-150-2946 with purchase request 7017789415. All packaging must comply with the Medical Marking Standard No. 1, superseding MIL-STD-129, and must be sealed in commercial unit containers that protect against damage, while exterior shipping containers ensure safe, cost-effective delivery to the destination. The product is regulated by the FDA, requiring referral to a product specialist for confirmation, and must be marked and labeled strictly according to DLA requirements, including adherence to ASTM D3951 unless overridden by higher-priority DLA technical and quality standards. Delivery is FOB destination within five days of award, with zero variance in quantity, and inspection and acceptance occur at the delivery point. The tubes, supplied by Covidien Sales LLC under part number 461800, must not be shipped via parcel post and must be transported by the fastest traceable means. The destination is the Commanding Officer at Camp Pendleton, California, with a specific freight address provided for logistics coordination. The solicitation number SPE2DS-26-T-327R indicates a federal defense procurement under the Department of Defense, with a response deadline of August 17, 2026, and an original required delivery date of August 11, 2026. The contract incorporates all applicable DLA Master List of Technical and Quality Requirements, and any references to packaging, marking, or quality control must follow the most current version in effect on the solicitation issue date. Palletization must conform to RP001, and the unit of issue is defined as PG with a unit price of $2.00, totaling $4.00.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

CONTROL SET, GASTROINTE

Solicitation # SPE2DS-26-T-327J

The CONTROL SET, GASTROINTESTINAL is a synthetic quality control panel designed for in vitro use with the FilmArray Gastrointestinal Panel assay on the FilmArray instrument. It consists of 12 vials containing synthetic nucleic acids suspended in a non-infectious buffer solution with preservatives and stabilizers, intended to monitor the detection and identification of multiple gastrointestinal pathogens during testing. Each kit provides sufficient reagent for six quality control runs and includes 12 tubes of 200 µL each, with six tubes of part number M2393718 and six of M2402818. The product must be stored frozen between -25°C and -15°C and has a non-extendable shelf life of 18 months. It is regulated by the FDA and must be supplied with the exact manufacturer part number and source as specified, with the bidder required to identify their supply details clearly. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all units must be sealed in suitable containers to prevent damage during transit. Shipments must use commercial exterior packaging that ensures safe delivery at the lowest freight rate to the designated destination, with palletization adhering to DLA packaging requirements. The item is delivered FOB destination with zero variance allowed, inspected and accepted at the point of delivery, and must be marked per DLA specifications. The contract specifies a delivery timeframe of 83 days from the solicitation date, with a total quantity of three kits under purchase request 7017817637. The product falls under NSN 6550-01-693-5901 and is subject to Covered Defense Information requirements, with all packaging and marking strictly governed by DLA’s medical acquisition protocols.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

VALVE, INSPIRATORY, M

Solicitation # SPE2DS-26-T-327C

The product is a disposable inspiratory valve designed for use with manual resuscitators or ventilators, featuring a 65 by 45 mm size and integrated PEEP functionality with unique resistance characteristics. It is compatible directly with original AMBU resuscitators and AMBUMATIC devices without requiring additional connectors, and is constructed to be latex-free and single-use, supplied in cases of twenty. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport via common carriers at the lowest cost to the designated delivery point at Fort Stewart, Georgia. All items must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and require labeling with the NSN, manufacturer and CAGE code, date of manufacture, and contract number. Technical and quality requirements are governed by the DLA Master List, and the procurement is under solicitation SPE2DS-26-T-327C, with a response deadline of August 17, 2026, and delivery required within five days of award. The contract calls for four cases of the product under NSN 6515-01-657-9792, and bidders must specify the source and part number being offered.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Solicitation # SPE2DS-26-T-327Q

The contract specifies the procurement of 100 sterile hardwood tongue depressors under NSN 6515-01-305-5120, with a shelf life of 60 months that is non-extendable, and requires compliance with all DLA packaging and marking standards, including Medical Marking Standard No. 1, which supersedes MIL-STD-129. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport via common carrier at the lowest cost to the designated delivery points, with palletization following RP001 requirements and packaging conforming to ASTM D3951 only when not overridden by higher-priority DLA technical and quality requirements. The items are regulated by the FDA, and vendors must be registered as Fleet Prime Vendors with approved part numbers from DYNAREX, BENCO, or CARDINAL HEALTH. The order includes four packages totaling 100 units, with two separate delivery lines—one for USS NITZE DDG 94 and another for USS THEODORE ROOSEVELT CVN 71—both requiring delivery within 20 days and shipment via the fastest traceable means; parcel post is prohibited. All packaging must be labeled with correct government identifiers and follow the exact unit of issue and quantity per unit pack as defined in the contract. The required delivery dates are August 12 and 13, 2026, with zero tolerance for quantity variance and inspection and acceptance occurring at the destination.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

SKIN CLOSURE, ADHESIVE,

Solicitation # SPE2DS-26-T-327N

The contract specifies the procurement of sterile adhesive surgical skin closures, commonly known as Steri-Strips, measuring 0.50 inches by 4 inches, supplied in units of 300 per package, with a total requirement of four packages. The product must feature porous backing options of either polypropylene film or nonwoven nylon fabric and be packaged in fifty envelopes per box. A minimum shelf life of 36 months is required, and no more than five months may have elapsed from the manufacturer’s production date to the date of delivery to the government. The item is identified by NSN 6510-00-054-7254 and is subject to specific technical, quality, and packaging requirements outlined in the DLA Master List of Technical and Quality Requirements, as well as DLA packaging standards and procedures for removal of government identification from non-accepted supplies. Delivery is due within five days of award, with the solicitation issued under contract number SPE2DS-26-T-327N, posted on August 10, 2026, and responses due by August 17, 2026. The procurement is managed by the Department of Defense’s Medical Supply Chain under the Military Health System, with point of contact Tiffany Parker, and performance is to be delivered to FPO, zip code 09579.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

BLADDER ASSEMBLY, LIFE

Solicitation # SPE8E6-26-Q-0617

The contract pertains to the procurement of 22 bladder assemblies for life preservers, identified by the National Stock Number 4220-01-487-2926, under solicitation SPE8E6-26-Q-0617. The item is classified as a commercial item and a critical application item, subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. It has a non-extendable shelf life of 180 months and must comply with DLA packaging requirements, including MIL-STD-2073-1E and MIL-DTL-117 Type II Class C Style 1, which mandates waterproof, greaseproof, opaque packaging to protect against ultraviolet degradation. The item must be free of asbestos and prohibited from containing intentional mercury or mercury compounds, with limited exceptions for specific functional uses under strict containment guidelines. Packaging must follow standardized marking and palletization procedures, and delivery is FOB origin with a firm fixed price and zero variance tolerance. The contract requires full compliance with documentation norms for source approval and government identification removal protocols, and all units must be inspected and accepted at origin. Delivery is due within 60 days after award, with a required shipping date of January 14, 2026, to the General Depot of Naval Supplies in Kaohsiung, Taiwan. The item is designated for government use only and is associated with a specific purchase request and project code. Suppliers listed include Gauzon Iberica SL, Switlik Parachute Company, Mustang Survival, and Yamazery Comercio e Servicos Ltda, each providing approved part numbers. Transportation and freight forwarding are governed by DLA procedural notes, and unit of issue aligns with DoD standards. The contract is awarded under a federal acquisition system and falls under Federal Supply Classification 4220.

DLA PACKAGING REQUIREMENTS FOR PROCUREMENT FEDERAL SUPPLY CLASSIFICATIONS

POSTED

DEADLINE

Water Auxiliary Tube Supply

252-NETWORK Contract Office 12 (36C252)

POSTED

DEADLINE

Supply of Ventaire Stainless Steel Drying/Tracking Units (8-Port)

252-NETWORK Contract Office 12 (36C252)

POSTED

DEADLINE

Supply of TK Series Cabinets (Stock Model 4)

252-NETWORK Contract Office 12 (36C252)

POSTED

about 17 hours ago

DEADLINE

in 6 days

View Details

More opportunities from Department Of The Interior → Ibc Acq Svcs Directorate (00004)

Same awarding agency

NAICS: 541690

New

Federal

Section 508 Accessibility Compliance for ICT Products

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Personal Protective Equipment (PPE) Compliance & Certification

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Tactical Equipment Supply (Non-IT)

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Law Enforcement IT Hardware and Laptops

Electronic Computer Manufacturing

POSTED

DEADLINE

Tactical Uniforms and Duty Apparel Supply

Men’s and Boys’ Cut and Sew Apparel Manufacturing

POSTED

DEADLINE

Firestop and Penetration Sealing Supply and Installation

Other Building Equipment Contractors

POSTED

DEADLINE

Rodent Debris Remediation and Biohazard Cleaning

POSTED

DEADLINE

Building-Wide Pest Exclusion Feasibility Study

Environmental Consulting Services

POSTED

DEADLINE

Ramp A/B Garage Pest Exclusion Construction

All Other Specialty Trade Contractors

POSTED

DEADLINE

Credit Union Pest Exclusion Construction

All Other Specialty Trade Contractors

POSTED

DEADLINE

Secure Report Formatting and Digital Delivery

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE

Geographic and Legal Documentation Support

Surveying and Mapping (except Geophysical) Services

POSTED

about 17 hours ago

DEADLINE

in 1 day

View Details