This Solicitation opportunity from Department Of Defense was posted on April 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
BANDAGE KIT, ELASTIC
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract calls for the procurement of a Bandage Kit, Elastic, specifically an abdominal wound type measuring 8 inches, with the part number 6510-01-532-6656. The kit must include a white pad measuring 12 by 12 inches and meet strict government packaging and quality standards as outlined by the Defense Logistics Agency (DLA). The bandage kit has a defined shelf life of 60 months, with delivery required within 10 months of manufacturing to ensure product viability. All packaging must comply with specified commercial and medical marking standards, including lot number, manufacturing and expiration dates, and additional contract-specific identifiers for shipping containers. The contract enforces specialized marking and removal of government identification on any non-accepted supplies and requires adherence to FDA regulations governing the device. Delivery terms specify shipment within 20 days to a destination in Johnston, Iowa, with acceptance and inspection to occur at the destination point. The packaging must protect the item from damage during transport and comply with federal and DLA-specific standards for hazardous and non-hazardous materials. Palletization and shipping instructions mandate the use of the fastest traceable means, excluding parcel post, and adherence to DLA packaging requirements for procurement. The solicitation, issued by the Department of Defense's Medical Supply Chain, is open for responses until mid-April 2026, with a single unit of the kit ordered. Contact information for coordination is provided, emphasizing compliance with all technical, quality, and regulatory requirements throughout the procurement process.
General Info
Agency
NAICS
Place of Performance
WH12, JOHNSTON, IA, 50131-0000, USASet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Submission Closed
Organization & Contact Information
Full Description
BANDAGE KIT, ELASTIC, ABDOMINAL WOUND, 8 INCHES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
BY 5 METERS, MILITARY GREEN
.
UNIT OF ISSUE KIT (KT)
.
SHALL INCLUDE A WHITE PAD, 12 INCHES BY 12 INCHES.
.
SHALL HAVE A SHELF LIFE OF 60 MONTHS.
NOT MORE THAN 10 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
MARKINGS ON ALL CONTAINERS SHALL INCLUDE THE LOT
(CONTROL) NUMBER, DATE OF MANUFACTURE PREFIXED BY
"MFD" AND EXPIRATION DATE PREFIXED BY "EXP".
.
IN ADDITION TO SHELF LIFE MARKINGS, WHEN SPECIFIED
IN THE CONTRACT/PURCHASE ORDER, MARKINGS ON THE
EXTERIOR (SHIPPING) CONTAINER SHALL INCLUDE THE
PURCHASE ORDER NUMBER, TRANSPORTATION CONTROL NUMBER
(TCN) AND BUILD DIRECTIVE NUMBER (BDN).
.
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. . PERFORMANCE SYSTEMS TELEPHONE 1-888-737-7978 . BIDDER SHALL SPECIFY CO AND P/N BEING SUPPLIED . . . RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
SPE2DS-26-T-8427
SECTION B
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
ALTITUDE TECHNOLOGIES INC. 04JV2 P/N FCP-09
O.M. PERFORMANCE, INC. 1RXT7 P/N FCP-09
DKR LLC 4G0J8 P/N FCP-09
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016176058 0001 KT 1.000
NSN/MATERIAL:6510015326656
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.
SPE2DS-26-T-8427
SECTION B
PR: 7016176058 PRLI: 0001 CONT’D
Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W81JM8
W7M8 USPFO ACTIVITY IA ARNG
AWCF SSF
CP DODGE 7105 NW 70TH AVE
JOHNSTON IA 50131-1824
US
RDD 555 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W51GA2
0194 FA BN 01 HHB T0 REAR DET
7105 NW 70TH AVENUE
WH12
JOHNSTON IA 50131-0000
US
MARKFOR
W51GA2
0194 FA BN 01 HHB T0 REAR DET
7105 NW 70TH AVENUE
WH12
JOHNSTON IA 50131-0000
US
M/F: (TCN) W51GA260900043
RDD: 555
PROJ: 0BY TP 3
SUPP ADD: W81JM8 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: ADV: 2A FC: 62
Need Ship Date:00/00/0000 Original Required Delivery Date:04/06/2026
SPE2DS-26-T-8427 NSN/Part Number: 6510-01-532-6656 Quantity: 1 KT Purchase Request: 7016176058QTY: 1 Delivery: 20 days ADO
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS