Bandsaw

The contract pertains to the procurement of a heavy-duty bandsaw with a capacity of 9 inches high by 14 inches wide for rectangular cuts and up to 9 inches in diameter for round workpieces, capable of handling a weight load of 3000 lbs. The saw features a 3 HP AC vector drive with blade speeds ranging from 70 to 380 SFPM, using a 1 inch by .035 inch by 11 foot 6 inch blade equipped with roller guides containing carbide inserts and manual blade tensioning. Coolant capacity is 15 gallons, and the machine operates on 460-60-3 voltage, requiring a plug-in power source. The saw is CNC-controlled with a color touch screen interface, offering over 99 programmable jobs, automatic kerf compensation, blade break and stall detection, and shuttle indexing with unlimited remnant ends of at least 8 inches. CNC projection accuracy is within plus or minus .002 inch, and a hydraulic barfeed extends 0 to 25 inches. The worktable measures 19 inches wide by 15 inches deep, and the machine has a shipping weight of 2400 lbs, with overall dimensions of 96 inches in length, 82 inches in width, and 68 inches in height. It is wired to NFPA 79 standards and includes forklift pockets in the base for ease of handling. Delivery requires the equipment to be transported by truck to a bay door measuring 12 by 15 feet located on a concrete road, then moved 50 feet onto a concrete floor using a provided forklift for final placement. The machine must be fully operational upon setup with all electrical connections meeting the specified voltage and safety standards. The procurement is issued under solicitation number W911S226U3678 by the Department of Defense through the Office at Fort Drum, New York, with a small business set-aside classification under NAICS code 332999. Responses are due by July 30, 2026, at 4:15 PM, with Douglas Coward listed as the primary point of contact. The place of performance is listed as 23801, though the physical location of delivery remains Fort Drum, NY.