Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BAR, METAL

Active
SPE8E4-26-T-2020Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a metal bar designated as a "DETENT ROD" with part number 593-6961210 PC2 and NSN 9510-01-565-2275, requiring a precise length of 2.56 inches. The item must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with verification levels for critical, major, and minor attributes defined as VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and manufacturers may choose between attribute or variable inspection methods. The product must adhere to MIL-STD-129R for marking, MIL-STD-2073-1E for packaging, and DLA packaging requirements, with no special marking codes applied. The material must meet ASTM A700-14 (R2019) specifications and the contract references QAP 13873 for metal certification. The contract calls for delivery of 182 units with a required delivery date of January 19, 2027, and a lead time of 71 days FOB origin. The purchase request number is 7017422082, with a unit price of $182.00 and a total price of $33,124.00. All units must be shipped to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, following parcel post address W25G1U and freight shipping address W1A8. Packaging must conform to RP001 and IP083 requirements for metal products, and unit of issue is EA. The solicitation, issued under contract SPE8E4-26-T-2020, was posted on August 5, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense through the DDSP New Cumberland Facility. The point of contact is Drew Reily, and the contract is governed by DoD procurement protocols including DLA Proc

General Info

Procure 182 DETENT RODs, 2.56 in, per MIL-STD and ASTM specs, deliver by Jan 19, 2027, at $182 each.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

331210 - Iron and Steel Pipe and Tube Manufacturing from Purchased SteelView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E4-26-T-2020 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Drew Reily
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BAR,METAL
BAR, METAL
"DETENT ROD"
53711 NAVAL SEA SYSTEMS COMMAND
P/N 593-6961210 PC2
REQUIRED LENGTH: 2.56"
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TDP Rev A Gen 1 IAW BASIC DRAWING NR 53711 6961210 REVISION NR G DTD 05/14/1999 PART PIECE NUMBER: 593-6961210 PC2
TDP Rev A Gen 1
SPE8E4-26-T-2020
SECTION B
IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124
REVISION NR DTD 12/04/2025
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD ASTM A700-14 (R 2019) REVISION NR DTD 11/01/2014 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017422082 0001 EA 182.000
NSN/MATERIAL:9510015652275
DELIVERY (IN DAYS):0071
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP083: Packaging, Marking, and Shipping of Metal Plating, Sheets, and other Metal Products
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE8E4-26-T-2020
SECTION B
PR: 7017422082 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:10/28/2026 Original Required Delivery Date:01/19/2027
SPE8E4-26-T-2020 NSN/Part Number: 9510-01-565-2275 Quantity: 182 EA Purchase Request: 7017422082QTY: 182 Delivery: 71 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331210
New
DIBBS
Supply of 4130 Steel Metal Bar (NSN: 9510002035789)The contract requires the procurement and delivery of approximately 334 feet of 4130 steel metal bar, with a tolerance of plus or minus 10 percent, meeting the stringent specifications of SAE AMS-S-6758B and ASTM A700. The material must be properly packaged, preserved using Method ZZ for corrosion and contamination control, and labeled in accordance with hazardous materials regulations to ensure safe handling and transport. The item is identified by NSN 9510002035789 and falls under NAICS code 331210 for steel rolling and drawing. Performance is designated for Tracy, California, with a zip code of 95304-5000. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. This is classified as a subcontract under the Department of Defense’s Construction & Equipment MRO_svc I program, though no set-aside type is specified. All deliverables must comply with federal and military standards for material quality, documentation, and hazardous material handling.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-303P
The contract specifies the procurement of 20 units of metallic tubing made from aluminum alloy 6061-T6 in seamless rectangular form measuring 3.00 by 1.00 inches with a wall thickness of 0.125 inches and a total length of 252 inches, conforming to ASTM standards for aluminum extruded tubes. Each unit constitutes one 21-foot length and is subject to the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129 respectively. The tubing must be free of Class I ozone-depleting chemicals, and any substitute chemicals require prior approval. The item is identified by NSN 4710-01-234-8297 and is to be delivered FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The delivery schedule requires fulfillment within 136 days from contract award, with a required ship date of January 1, 2027. Packaging must align with DLA packaging directives, including palletization and container specifications, and all items must be marked as specified with no special marking codes applied. The shipment is to be routed to DLA Distribution Warner Robins at Robins Air Force Base, Georgia, under transportation guidelines referenced in DLAD Proc Note C19 and C20. The solicitation number is SPE7M4-26-T-303P, issued under full and open competition, with a unit price of $0.000 and a total contract value of $0.000, and the point of contact is Rory O'Reilly of the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-304F
The contract specifies the procurement of metallic copper tubing with a standard size of 1/4 inch and a standard coil length of 50 feet, identified by NSN 4710-01-466-3855 and part number ASTM-B280X.250OD, manufactured in compliance with ASTM B280 Revision NR dated 04/01/2020 and TDP Rev A Gen 2. The item is designated as a critical application product, requiring strict adherence to technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging must conform to MIL-STD-129 and DLA Packaging Requirements, with all units packed in accordance with ASTM D3951 where not overridden by DLA mandates, and palletization strictly following RP001 guidelines. The contract calls for 24 units to be delivered within two days f.o.b. origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with no tolerance for quantity variance. The delivery must be completed by August 20, 2026, and inspection and acceptance occur at the destination. Transportation and shipping details are governed by DLA procedural notes C19 and C20, and all labeling and identification must follow government protocol including the removal of government identifiers from non-accepted supplies. The procurement is managed under solicitation SPE7M4-26-T-304F, with a unit price of $24.00 per unit, totaling $576.00, and point of contact is Rory O’Reilly of the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-303N
The contract specifies the procurement of seamless copper tubing with a 0.500 inch outer diameter, manufactured to meet ASTM B280 Revision 23 dated October 1, 2023, for use in air conditioning and refrigeration field service. The tubing must comply with all applicable technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over any other specifications including ASTM D3951. The item is classified as a critical application product and strictly prohibits the use or incorporation of Class I ozone-depleting chemicals; any substitute chemicals require prior approval unless explicitly authorized by the specification. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, with attributes assigned verification levels or AQLs based on criticality. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling conforming to specified standards. The quantity ordered is 20 feet, with a 10% variance allowance, and delivery is FOB origin with inspection and acceptance occurring at the destination. The required delivery date is 140 days from contract award with an original due date of September 29, 2026, and a needed ship date of January 5, 2027. The NSN is 4710-01-421-6663 and the purchase request number is 7017437876. All shipments must be addressed to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation procedures must follow DLAD Proc Note C19 and C20. Full and open competition applies, with no set-aside provisions.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7M4-26-T-303R
This contract pertains to the procurement of a single metallic tube and fitting unit with NSN 0001S00000052, under solicitation SPE7M4-26-T-303R, which is a total small business set-aside classified under NAICS code 331210. Delivery is required within 709 days after delivery order issuance, and the offer response deadline is August 17, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition type. The item is subject to tailored higher-level quality requirements, configuration change management protocols, and inspection and acceptance at the manufacturer’s origin. Government identification must be removed from non-accepted supplies, and export-controlled technical data governed by ITAR or EAR applies, restricting disclosure to foreign persons regardless of location. Only contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization may handle this data, in compliance with DFARS 252.225-7048. Packaging must meet DLA-specific standards, and the contract requires Cybersecurity Maturity Model Certification Level 2 compliance through a certified third-party assessment organization. Government first article inspection is mandatory, and the point of contact for inquiries is Rory O’Reilly of the Department of Defense’s Fluid Handling Division, with performance to occur at Hill AFB, Utah.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, DEFUELING
Solicitation # SPE7M0-26-T-031Z
The contract pertains to the procurement of a single unit of a TUBE, DEFUELING item, identified by NSN 4710-00-238-6158, under solicitation SPE7M0-26-T-031Z, with a required delivery within five days of award. The item must be furnished FOB origin with no tolerance for quantity variance, inspected and accepted at the point of origin, and packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards. Packaging must adhere to DLA’s specific procurement requirements, including palletization and containment specifications, with no special marking required. The contract explicitly prohibits the use of ozone-depleting chemicals and any intentional introduction of mercury or mercury-containing compounds, except for specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with additional requirements for secondary containment and shockproofing where applicable. All technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List, with applicable revisions controlled by the solicitation or award date depending on the acquisition size. Configuration changes require formal engineering change proposals or variance requests, and substitute chemicals must be pre-approved unless already authorized. The delivery destination is the Arsenal de Ferrol in Spain, with freight forwarding governed by DLA procedural notes, and the contract is subject to full and open competition under a NAICS code of 331210. The response deadline is set for August 17, 2026, with an original required delivery date of January 26, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-304D
The contract is for the procurement of 325 feet of metallic tube identified by NSN 4710-01-438-3116 under solicitation SPE7M4-26-T-304D, issued by the Department of Defense’s Fluid Handling Division. The item is to be delivered to Robins AFB, Georgia, with a delivery deadline of 154 days after award, and responses to the solicitation are due by August 17, 2026. The supplier is required to include all data mandated by the DLA Packaging Requirements for Procurement in the item’s price and must provide a Certificate of Quality Compliance for each manufacturing lot, with one copy per lot based on product specification, OEM part number, or technical documentation, all prepared in accordance with the Supplemental Quality Assurance Provision. For contracts subject to Government inspection at source, the completed COQC must be available for review by Government representatives at the time of material presentation, and compliance permits the official sign-off on the WAWF receiving report provided the documentation is uploaded as an attachment to the Production CLIN in iRAPT. The supplier must also submit an electronic copy of every COQC to the iRAPT system via the Receiving Report’s Attachment tab for Government records retention.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-301T
This contract involves the procurement of a metallic tube item designated by part number WWT700/4-O-I-1.750X0.049 and NSN 4710-00-279-0961, with a total quantity of 410 feet to be delivered under solicitation SPE7M4-26-T-301T. The product must comply with the SAE AMS-WW-T-700 specification, Revision B dated January 1, 2018, and is classified as a critical application item requiring strict adherence to technical and quality standards. All deliveries must meet DLA packaging requirements per MIL-STD-2073-1E and ASTM B660, with marking in accordance with MIL-STD-129 and no special markings required. The tubing must be free from Class I ozone-depleting chemicals, and any substitute chemicals must receive prior approval. Metal certification data is mandatory and governed by CDRL-METALSCERT, which must be provided as referenced in the Technical Data Package and aligned with DLA’s Master List of Technical and Quality Requirements. Delivery is required FOB origin within 140 days of contract award, with a delivery deadline of January 5, 2027, and a permitted quantity variance of plus or minus 10%. Inspection and acceptance occur at the destination, specifically at the DLA Distribution facility in Warner Robins, Georgia. Packaging must be palletized per RP001, and the unit of issue is feet as defined by DoD standards. The contract is open to full and open competition with no set-aside, and all suppliers must comply with the DLA Technical Data Management Transformation system for access to required documentation. The contract includes provisions for removal of government identification from non-accepted supplies, use of calibrated measuring and test equipment, and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Freight and shipping details are governed by DLA procedural notes, and all data requirements must align with the contract’s specified revisions and effective dates as defined by the DLA procurement framework.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
PIPE, PLASTIC
Solicitation # SPE7M4-26-T-301Z
The contract specifies the procurement of 104 units of a nonmetallic plastic pipe made from phenolic-resin (FBE) material, molded to an inner diameter of 7/8 inch and an outer diameter consistent with a 4-1/32 inch length, meeting the technical specifications previously defined under MIL-P-79, which has been cancelled and replaced by MIL-I-24768/13 for electrical applications. The product is identified by NSN 4710-00-844-2562 and is intended for use in nonmetallic, high-performance electrical environments. All requirements are subject to the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date depending on acquisition size. Packaging, identification, and non-accepted supply handling follow DLA-specific protocols, and full and open competition applies. The supplier is required to provide a Certificate of Quality Compliance for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, with one physical copy delivered alongside the goods and an electronic version uploaded to the iRAPT system via the Receiving Report attachment tab. For government inspections at source, the certificate must be available for review during acceptance, and Government representatives may sign off on the WAWF receiving report upon verification of compliance. The data associated with this contract, including the COQC documentation, is included in the item’s price and must be fully executed by the supplier. Solicitations are open under contract number SPE7M4-26-T-301Z, with bids due by August 17, 2026, and delivery expected within 197 days after contract award, with performance to be completed at New Cumberland, Pennsylvania, 17070-5002, under the oversight of the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-301J
The contract requires the supply of metallic tubing made from aluminum alloy 2024 in temper T-3, seamless, with an outer diameter of 0.875 inches and a minimum wall thickness of 0.095 inches, supplied in random lengths between 8.0 and 12.0 feet. The material must comply with SAE AMS-WW-T-700/3A, excluding paragraphs 6.2 d and g. A total of 331 feet is needed, identified by NSN 4710-00-278-6362, with delivery due within 105 days of award. The procurement is for full and open competition under the NAICS code 331210, managed by the Department of Defense’s Fluid Handling Division. All supplies must be free of Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The supplier must provide a Certificate of Quality Compliance for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and submit an electronic copy to the iRAPT system via the Receiving Report attachment tab. For government-inspected contracts, the certificate must be available at the time of material presentation for acceptance, and compliance must be documented in WAWF. Configuration changes require an Engineering Change Proposal or variance request, and all quality and technical requirements referenced in the DLA Master List govern this procurement. Packaging must meet DLA standards, and government identification must be removed from non-accepted supplies. The solicitation number is SPE7M4-26-T-301J, with a response deadline of August 17, 2026, and point of contact is Rory O’Reilly.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-302U
The contract specifies the procurement of metallic tubing made from corrosion-resistant steel meeting SAE AMS specification S21900, described as round, plain-ended, straight-seamed, fusion-welded tubing with a 3/8 inch outer diameter and 0.020 inch wall thickness, available in lengths between 10 and 24 feet. The material must comply with stringent technical and quality standards, including mandatory marking every three feet with the producer’s name and trademark, specification number, composition, size, contract number, national stock number, and weld type indicator “W.” Additional requirements prohibit the use of ozone-depleting chemicals and restrict mercury or mercury-containing compounds except under specific exemptions such as functional devices in weapon systems or instrumentation. The tubing is classified as a critical application item and must be inspected and accepted at the origin, with sampling governed by MIL-STD-1916 or comparable zero-based plans and requiring zero non-conformances unless otherwise specified. Metal certification documentation is required, and packaging must adhere to MIL-STD-2073-1E and DLA packaging guidelines, with bundling required for pipe larger than 1.5 inches and individual master lifts limited to 2000 pounds. The contract includes two line items for a total quantity of 526 feet, with delivery scheduled to occur within 77 days from the required delivery date of May 10, 2027, and FOB origin terms apply with a 10 percent quantity variance allowance. Deliveries are to be routed to two DLA distribution centers in San Diego, California, and Robins Air Force Base, Georgia, using unit of issue in feet. All shipments must conform to MIL-STD-129 marking standards, with no special marking codes applied, and palletization must follow DLA packaging requirements. Full and open competition applies, and the procurement is subject to DoD contract data requirements including CDRLs for metal certification. The solicitation number is SPE7M4-26-T-302U, issued by the Department of Defense’s Fluid Handling Division, with a bid response deadline of August 17, 2026, and the contract is governed by the revision of the DLA Master List of Technical and Quality Requirements effective as of the solicitation issue date.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-301C
This contract specifies the procurement of seamless aluminum alloy tubing made from 6061-T6 material, with an outside diameter of 0.750 inch and a wall thickness of 0.049 inch, delivered in random lengths between 10 and 12 feet. The tubing must meet the Aerospace Material Specification AMS4083N and be solution heat treated and artificially aged to achieve the T6 temper. All materials must comply with strict quality and inspection standards, including zero non-conformances in sampling per MIL-STD-1916 or equivalent zero-based plans, and critical attributes must be verified at the highest levels. Continuous identification marking per SAE-AMS-STD-185 is required, and bundle tagging is prohibited. The product is designated as a critical application item and must be free of ozone-depleting chemicals, with any substitutes requiring prior approval. Preservation and packaging must follow ASTM B660 and MIL-STD-2073-1E, using Level A preservation methods, with marking in accordance with MIL-STD-129 and no special markings. The tubing is subject to metal certification requirements, and quality assurance documentation must be submitted as per CDRL-METALSCERT. The delivery quantity is 654 linear feet, with a 10% variance allowed, and all items are to be delivered FOB origin within 19 days of order placement. Delivery is to Hill Air Force Base, Utah, with the original required delivery date set for June 30, 2027, and a need ship date of September 6, 2026. Full and open competition applies, and the procurement is governed by Department of Defense acquisition regulations and technical data packages referenced in the contract.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 493190
New
DIBBS
Specialized Packaging and Labeling Services
Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332211
New
DIBBS
Precision Milling Cutter Supply
Cutlery and Flatware (except Precious) Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325520
New
DIBBS
Supply of Reflective Tape (Red, 6 Inches Wide, 1800 Inches per Roll)The contract entails the procurement and delivery of 158 rolls of red reflective tape, each measuring 6 inches in width and containing 1,800 inches of material, fully compliant with federal standards for reflectivity, durability, and use in hazardous material labeling. The tape must meet stringent performance criteria to ensure visibility and safety in critical applications, particularly within defense and transportation environments. The requirement is part of a subcontract under a Women-Owned Small Business Set-Aside, designated by NAICS code 325520, and is being managed by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. Performance of this contract is required to take place at NEW CUMBERLAND, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 5, 2026, and responses must be submitted no later than August 17, 2026. All submissions must adhere to federal specifications ensuring the product's reliability under demanding conditions, and the award will be restricted to certified Women-Owned Small Businesses as mandated by the set-aside classification. The contract details are accessible via the DIBBS platform at the provided link, and timely compliance with delivery and quality requirements is essential for successful contract execution.
Adhesive Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Preservation ServicesThe contract entails the military-compliant packaging and preservation of threading tool assemblies in accordance with DLA RP001 and MIL-STD-2073-1E standards, ensuring all materials and methods meet rigorous defense specifications. This includes the use of heat-treated wooden pallets to prevent the spread of pests, the exclusion of any mercury-containing components, and the application of clean and dry preservation techniques to protect components from corrosion and contamination during storage and transport. The work must be performed to exacting military quality controls, maintaining the integrity of sensitive equipment throughout the supply chain. The solicitation, issued under NAICS code 493190, is structured as a subcontract opportunity with a response deadline of August 17, 2026, and is associated with the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. Performance is required at the facility located in New Cumberland, Pennsylvania, with a zip code of 17070-5002. This procurement is part of the Defense Logistics Agency’s broader efforts to secure and sustain critical tooling assets using standardized, environmentally responsible, and militarily accepted packaging practices, ensuring readiness and operational reliability across military platforms.
Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Technical Compliance and Hazard Documentation SupportThe contract seeks technical compliance and hazard documentation support for the preparation and submission of Material Safety Data Sheets and hazard warning labels that meet OSHA 29 CFR 1910.1200 and MIL-STD-129 standards, ensuring proper handling, storage, and transport of hazardous materials. The work requires strict adherence to federal and military labeling and documentation regulations, with deliverables focused on accuracy, completeness, and regulatory alignment for defense-related applications. Performance will be executed at the New Cumberland facility with a ZIP code of 17070-5002, and the solicitation is classified as a subcontract under NAICS code 541690, indicating specialized scientific and technical consulting services. The opportunity was posted on August 5, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense through the DDSP New Cumberland Facility. No setaside classification is specified, and the contract does not include a designated point of contact within the provided data. Interested parties must submit proposals through the DIBBS portal using the solicitation number SPE8E526T3778 to be considered for award.
Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining and Tool ManufacturingThe contract calls for the manufacture of a precision threading tool assembly that must adhere strictly to military standard CID A-A-51136-B10, ensuring exacting tolerances and performance characteristics suitable for defense applications. The assembly requires the integration of a clamping device alongside the threading tool, demanding high-precision machining and reliable functionality under operational conditions. The work must comply with all technical specifications outlined in the referenced standard, with quality control and documentation procedures aligned with defense manufacturing requirements. This is a subcontract opportunity under NAICS code 332710, posted by the Department of Defense through its DDSP NEW CUMBERLAND FACILITY, with performance location designated at NEW CUMBERLAND, Pennsylvania, ZIP 17070-5002. Interested parties must submit responses by August 17, 2026, following the solicitation process initiated on August 5, 2026. The contract is part of the Defense Logistics Agency's procurement system, and all proposals must meet the rigorous standards expected for defense-related tooling, with no set-aside classification specified.
Machine Shops

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332320
New
DIBBS
Supply of Welding Electrodes (NSN: 3439016664749)The contract pertains to the supply and delivery of 63 units of commercial off-the-shelf welding electrodes, with each unit containing 10 electrodes, for use in metal fabrication and repair operations. All electrodes must meet federal specifications and are identified by the National Stock Number 3439016664749. The requirement is issued under a subcontract with a response deadline of August 17, 2026, and was posted on August 5, 2026. The work is to be performed at the New Cumberland facility with a zip code of 17070-5002, under the authority of the Department of Defense through the DDSP New Cumberland Facility. The North American Industry Classification System code for this requirement is 332320, indicating it falls within the forge and stamping industry sector. No set-aside type or point of contact details are provided in the available data.

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
Quality Certification and Documentation Services
Testing Laboratories and Services

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Military-Grade Packaging and Preservation
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Precision Metal Marking and Identification
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331222
New
DIBBS
Precision Steel Bar Manufacturing and Supply
Steel Wire Drawing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Delivery to Destination (FOB Destination)The contract requires the transport and delivery of packaged filter elements to the specified destination under FOB Destination terms, meaning the seller retains responsibility for all costs and risks until the goods arrive and are accepted at the destination. Proof of delivery and inspection readiness at the location are mandatory, ensuring the recipient can verify receipt and conduct immediate inspections upon arrival. The place of performance is clearly designated as New Cumberland with a zip code of 17070-5002, and the responsible agency is the DDSP NEW CUMBERLAND FACILITY under the Department of Defense. The contract falls under NAICS code 484220, which corresponds to specialized freight trucking, indicating the need for specialized logistics handling. This is a subcontract opportunity with a response deadline of August 17, 2026, and it was posted on August 5, 2026, providing potential respondents approximately twelve business days to prepare and submit their proposals. All parties must ensure compliance with delivery timing, documentation requirements, and inspection protocols to meet contractual obligations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details