Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BAR, METAL

Active
SPE8E4-26-T-2064Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 5 units of iron alloy 660, A-286, flat bars measuring 0.380 inches across flats, 1.630 inches in length, and 0.310 inches thick, compliant with SAE AMS5853E and referenced quality standards. All material must be supplied in whole-foot lengths and meet strict dimensional tolerances. Each bar must carry continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and grade, manufacturer’s name, heat and lot number, and exact dimensions, applied via stamping or stenciling with legible, waterproof, and non-contaminating inks. Adhesive labels are required for bars under 0.250 inches in nominal OD, and tags are acceptable for wire forms. A Certificate of Quality Compliance, or mill-material certification, must accompany every shipment and be submitted to the DLA Troop Support Contracting Officer. Packaging must adhere to MIL-STD-2073-1E and RP001 requirements, with special preservation code ZZ per ASTM A700 and labeling per MIL-STD-129, including the special marking code ZZ for additional requirements. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and non-compliant offers must explicitly state their deviation; any product not sourced from an approved QSLD distributor constitutes an unauthorized substitution with potential criminal penalties. Quality conformance inspections and source inspection requirements are waived for QSLD-compliant suppliers, with certification documentation governed by CDRL-METALSCERT. The contract calls for delivery within 98 days to DLA Distribution San Diego, FOB origin, with zero quantity variance allowed. The NSN is 9510-01-617-8668, the unit price is $5.00 per unit, and the total contract value is $25.00. All materials must be palletized, protected, and shipped with markings that include dual unit quantities if applicable, and must conform to the specified TDP revisions and technical data requirements referenced in the DLA Master List of Technical and Quality Requirements.

General Info

5 units A-286 iron alloy bars, QSLD-only, $5 each, 98-day delivery, full compliance with MIL-STD and AMS specs.

Agency

Department Of Defense → SAN DIEGOView Agency

NAICS

331221 - Rolled Steel Shape ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E4-26-T-2064 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → SAN DIEGO
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → SAN DIEGO
View Agency Profile
Office AddressUS
Contacts
Pamela Duffey
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BAR,METAL
BAR, METAL
IRON ALLOY 660, A-286, FLAT
0.380 IN W ACROSS FLATS
1.630 IN LG
0.310 IN THK
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
SPE8E4-26-T-2064
SECTION B
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
TDP Rev B Gen 2 IAW BASIC NON GOVT STD SAE AMS5853E REVISION NR E DTD 04/01/2024 PART PIECE NUMBER: IRON ALLOY 660/AS A-286 CRES
TDP Rev B Gen 2 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
SPE8E4-26-T-2064
SECTION B
TDP Rev B Gen 2 IAW REFERENCE NON GOVT STD SAE AMS2806 REVISION NR D DTD 12/20/2018 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017757247 0001 EA 5.000
NSN/MATERIAL:9510016178668
DELIVERY (IN DAYS):0098
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:00 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW ASTM A700 PACKING Z = ASTM A700 MARKING IAW MIL-STD-129
IP083: Packaging, Marking, and Shipping of Metal Plating, Sheets, and other Metal Products
SPECIAL PACKAGING CODES Z AND ZZ SHALL BE AS SPECIFIED IN ASTM A700. VINYL OR PLASTIC COATED PRESSURE SENSITIVE LABELS ARE AUTHORIZED FOR ALL MARKING ON STRUCTURAL SHAPES, PIECES SHIPPED LOOSE OR BANDED SECURED LIFTS. SECURED LIFTS SHALL BE IDENTIFIED ON EACH END.
ADDITIONAL MARKING REQUIREMENTS: WHEN THE CONTRACT OR ORDER REFLECTS TWO UNITS (EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.) SHIPMENT MARKINGS SHALL INCLUDE THE QUANTITY OF BOTH UNITS. THIS MARKING DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
SPE8E4-26-T-2064
SECTION B
PR: 7017757247 PRLI: 0001 CONT’D
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:11/27/2026 Original Required Delivery Date:01/19/2027
SPE8E4-26-T-2064 NSN/Part Number: 9510-01-617-8668 Quantity: 5 EA Purchase Request: 7017757247QTY: 5 Delivery: 98 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331221
New
DIBBS
Supply of Metal Bar Stock (NSN 9530-00-288-0658)The contract ensures the supply of military-grade metal bar stock designated by NSN 9530-00-288-0658, strictly adhering to Defense Logistics Agency packaging, marking, and delivery protocols to meet rigorous defense standards. This subcontract is part of the Department of Defense’s broader logistics framework, with production and fulfillment governed by NAICS code 331221, indicating the involvement of a specialized metal rolling and forging manufacturer. All items must be packaged, labeled, and shipped in full compliance with DLA specifications to ensure seamless integration into military supply chains, with performance requirements tied to precise quality and documentation controls. The contract was posted on August 9, 2026, and is administered under a DLA award with the reference number SPE8E424PQ521, though specific delivery locations and point of contact details are not provided.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 331221
New
DIBBS
Metal Plating and Sheet SupplyThe contract requires the supply of 135 units of corrosion-resistant steel sheets conforming to AMS 5517 Alloy 301, solution heat treated, cold rolled, descaled, with a thickness of 0.032 inches and a width of 36 inches, cut to whole-foot lengths in compliance with military specifications. All materials must meet exact dimensional and metallurgical standards to ensure performance in demanding environments. The procurement is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with the NAICS code 331221 indicating the industry classification for rolled metal product manufacturing. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and the place of performance is specified as San Diego, California, with a zip code of 92136-3581. The contracting agency is the Department of Defense under the office name Construction & Equipment MRO SVC I, indicating this supply supports maintenance, repair, and overhaul operations for military equipment. The procurement is listed on the DIBBS platform, and while no point of contact is provided, submissions must adhere to the outlined technical and compliance requirements to be considered for award.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
Corrosion-Resistant Steel Plate Manufacturing & SupplyThe contract calls for the manufacture and supply of six units of 0.500-inch thick, 36-inch by 96-inch corrosion-resistant steel plate made from COMP 4340 material, processed under hot rolling and annealing conditions with sheared edges to meet aircraft-quality standards. Full traceability is required for all materials and production processes, and each unit must be marked in accordance with military specifications to ensure compliance and accountability. The material must demonstrate proven resistance to corrosion while maintaining the structural integrity and mechanical properties expected in high-stakes aerospace applications. The contract is structured as a subcontract under the NAICS code 331221, indicating classification within the rolled metal product manufacturing sector, and is issued by the Department of Defense via the Depot Oklahoma office, with performance required at Tinker Air Force Base, Oklahoma, zip 73145-8000. Bids must be submitted by August 20, 2026, following a posting date of August 9, 2026, with no set-aside provisions specified, and the solicitation is accessible through the DIBBS platform.
DEPOT OKLAHOMA

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
High-Strength Metal Plate Supply (SAE AMS5862M Compliant)The contract calls for the supply of 0.375-inch thick, 36-inch by 36-inch metal plates that must fully comply with SAE AMS5862M and SAE AMS2807C specifications, ensuring material integrity for high-performance applications. Each shipment must be accompanied by complete material certification and the supplier must be listed on the Qualified Supplier List for Defense (QSLD) to validate compliance with aerospace and defense industry standards. The plates are intended for use in critical maintenance, repair, and overhaul operations under the Department of Defense, with performance delivery required at Tracy, California, 95304-5000. Bidders must submit proposals by August 20, 2026, and the solicitation is structured as a subcontract under NAICS code 331221, which classifies the industry as rolled metal product manufacturing. The requirement emphasizes traceability, documentation, and adherence to strict military-grade material standards.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
Hot-Rolled Metal Plate SupplyThe contract calls for the supply of eleven hot-rolled stainless steel plates, each measuring 0.3125 inches in thickness and 50 by 144 inches in surface area, compliant with ASTM A240/A240M-26 Class 304 Condition A specifications. All plates must be permanently marked according to ASTM A480/A480M and Defense Logistics Agency requirements to ensure traceability and conformance. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, specifically designated for small business concerns as defined by the Small Business Administration, and is classified under NAICS code 331221 for rolling and drawing of nonferrous metals. The offer deadline is August 20, 2026, with the request for quotation posted on August 9, 2026. The project is managed by the Nuclear Reactor Program within the Department of Defense, and the materials are to be delivered to a designated performance location in New Cumberland, Pennsylvania, with zip code 17070-5002. While the contracting office’s physical address and point of contact are not specified, the procurement is accessible via the DIBBS platform for registered participants. This solicitation emphasizes strict adherence to material standards and marking protocols to support high-integrity applications in nuclear reactor systems, and only small business entities are eligible to bid under this set-aside program.
NUCLEAR REACTOR PROGRAM

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
Manufacturing of 316L Stainless Steel BarsThe contract entails the production of 316L stainless steel bars meeting the specifications of SAE AMS2806, encompassing the full manufacturing sequence from melting and forging to pickling and dimensional verification, all to ensure compliance with Defense Logistics Agency standards. The output must adhere strictly to material and dimensional requirements, with quality control integrated at every stage to guarantee conformity and reliability for defense applications. The work is scoped as a subcontract under the Department of Defense, managed by the DDSP NEW CUMBERLAND FACILITY, with performance designated to occur in New Cumberland, Pennsylvania, 17070-5002. The solicitation issued under NAICS code 331221 for primary metal manufacturing was posted on August 9, 2026, with responses required by August 20, 2026. All production activities must align with federal defense procurement mandates, ensuring traceability, documentation, and inspection protocols are fully implemented to meet DLA regulatory expectations.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
Metal Sheet Supply (Aluminum/Steel Plate)The contract requires the supply of 40 sheets of metal specified under NSN 9535005963789, with strict adherence to defined grade, alloy, temper, dimensions, and preservation standards. All material must be delivered in whole-foot lengths with zero variance in size, ensuring precision and consistency for intended applications. The sheets are to be aluminum or steel plate as implied by the contract title, and compliance with all technical specifications is mandatory to meet operational requirements. The contract is a subcontract issued by the Department of Defense through the Depot Oklahoma office, with performance located at Tinker AFB, Oklahoma, ZIP 73145-8000. It was posted on August 9, 2026, and responses are due by August 20, 2026. The NAICS code 331221 indicates classification under Aluminum Rolling, Drawn, and Extruded Material Manufacturing. The solicitation number SPE8E426T2074 is the primary identifier for proposal submission, and all interested parties must adhere to the outlined specifications and deadlines without exception.
DEPOT OKLAHOMA

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
PLATE, METAL
Solicitation # SPE8E9-26-T-3410
The contract specifies the procurement of a metal plate measuring 0.375 inches thick by 36 inches wide by 36 inches long, weighing approximately 138.99 pounds per piece, with technical compliance governed by SAE AMS5862M and SAE AMS2807C standards. The material must be supplied only by companies listed on the Qualified Suppliers List for Distributors (QSLD), and any deviation from this requirement must be explicitly declared by the offeror; noncompliance may result in criminal penalties. A Certificate of Quality Compliance, including mill material certification, is mandatory for every shipment and must be submitted to both the receiving depot and the DLA Troop Support Contracting Officer. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stated, and critical attributes are subject to stringent verification levels. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with special preservation codes Z and ZZ as defined by ASTM A700, and all shipments must include dual-unit quantities where applicable. Delivery is FOB origin with no quantity variance permitted, and the product must be delivered within 62 days to the designated DLA warehouse in Tracy, California. The contract references multiple DLA technical and quality requirements, including CDRL-METALSCERT, and all documentation, including certifications and compliance statements, must align with the revisions in effect on the solicitation date.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-T-3408
The contract specifies the procurement of 135 sheets of corrosion-resistant steel, AMS 5517 Alloy 301, solution heat treated, cold rolled, descaled, with a thickness of 0.032 inches, width of 36 inches, and length in whole feet increments. Each sheet must be marked with the DLA contract delivery order number, NSN, specification revision, grade, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions, using stenciling or stamping that is legible, waterproof, and non-contaminating. A Certificate of Quality Compliance must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. All packaging must comply with MIL-STD-2073-1E and DLA’s RP001 requirements, including robust corner and edge protection, full top and bottom fiberboard coverage, and labeling per MIL-STD-129 with special codes Z and ZZ as defined in ASTM A700. Shipment markings must include both units of measure when applicable, such as lb-sh. Delivery is FOB origin with a strict 46-day timeline, inspection and acceptance occur at destination, and no quantity variance is permitted. Only suppliers on the Qualified Suppliers List for Distributors (QSLD) are eligible, and any deviation from this requirement constitutes a bid exception that must be explicitly stated. Failure to comply with any requirement, including marking, packaging, or supplier qualification, may result in rejection of goods or criminal penalties. The materials are to be delivered to three DLA distribution centers in San Diego, Tinker AFB, and Warner Robbins, with transportation governed by DLA procedural notes C19 and C20.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
PLATE, METAL
Solicitation # SPE7M2-26-T-6171
This contract specifies the procurement of 11 plates of hot-rolled metal, each measuring 0.3125 inches thick, 50 inches wide, and 144 inches long, with overall surface treatment either sand blasted or pickled. Each plate must be marked in strict compliance with paragraph 25 of ASTM A480/A480M, including the DLA contract number, national stock number, specification number and revision, steel type or UNS designation, manufacturer’s test identification number, manufacturer’s name or trademark, and dimensions. The material must conform to ASTM A240/A240M-26, Revision 26, dated 04/01/2026, with a Class 304 Condition A specification, and quality assurance follows Reference QAP 13873 and ASTM A480/A480M-20A. Metal certification requirements are governed by CDRL-METALSCERT, and all technical and quality requirements are sourced from the DLA Master List of Technical and Quality Requirements. Packaging must adhere to MIL-STD-2073-1E and RP001 DLA Packaging Requirements, with marking consistent with MIL-STD-129 and special codes Z and ZZ as defined in ASTM A700. Preservation methods must avoid mercury or mercury-containing compounds in all stages, including packaging and preservation, and must comply with NAVSEA 5100-003D for any permitted exceptions. Ozone-depleting chemicals are strictly prohibited. The plates are to be delivered FOB origin in a single shipment of 11 units within 158 days, with no variance in quantity allowed, and must be sent to the specified DLA distribution facility in New Cumberland, PA. The contract is a total small business set-aside under NAICS code 331221, with a response deadline of August 20, 2026, and an original required delivery date of March 27, 2027.
NUCLEAR REACTOR PROGRAM

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-26-T-2070
Steel plate, corrosion resistant and aircraft quality, compliant with COMP 4340, hot rolled and annealed with sheared edges, is specified at 0.500 inches thick, 36 inches wide, and 96 inches long, with an approximate weight of 490 pounds per unit. The material must be supplied in whole-foot lengths only and meet strict dimensional tolerances. All units require continuous identification markings including the DLA contract delivery order number, NSN, specification number and revision, alloy and temper details, manufacturer’s name, heat and lot number, and exact dimensions. Markings must be applied via stamping or stenciling using waterproof, noncontaminating fluids that remain legible under normal handling; adhesive labels are authorized for smaller bars, tubes, and shapes under 0.250 inches nominal OD. A Certificate of Quality Compliance, or mill material certification, must accompany every shipment and be submitted to the DLA Troop Support Contracting Officer. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with preservation following ASTM A700 and marking in accordance with MIL-STD-129R. The product must be palletized and protected with appropriate dunnage to prevent damage, ensuring all materials are clean and dry. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond; noncompliant bids are considered exceptions and subject to rejection. The QSL program waiver applies to source inspection requirements such as COQC, PVT, and QAP-EQ003 for approved suppliers. Technical compliance is governed by referenced standards including SAE AMS6359, ASTM A700-14, SAE AMS2807C, and MIL-STD-129R. The contract calls for delivery of six units to Tinker AFB, Oklahoma, FOB origin, within 39 days, with a required delivery date of July 1, 2026. No quantity variance is permitted. The NSN is 9515-00-079-4576, and the procurement is under solicitation SPE8E4-26-T-2070 with a response deadline of August 20, 2026.
DEPOT OKLAHOMA

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331221
New
Federal
95--PLATE,METAL
Solicitation # SPE7M226T6158
The U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for 76 metal plates identified by NSN 9515002044573 under solicitation number SPE7M226T6158, which is a Small Business Set Aside for total award. The requirement is for delivery to W1A8 DLA Distribution with a mandatory delivery timeline of 161 days after award. All submissions must be made electronically via the SAM.gov portal, and no hard copies of the solicitation are available. Digitized technical drawings and military specifications can be accessed online. The solicitation was posted on August 6, 2026, with responses due by August 17, 2026, and is classified as a combined solicitation under NAICS code 331221 for forged steel and related products. The responsible procurement office is located in Columbus, Ohio, and all inquiries must be directed via email to the designated point of contact provided in the official solicitation document accessible through the SAM.gov link.
DLA Land And Maritime

POSTED

4 days ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → SAN DIEGO

Same awarding agency

NAICS: 541611
New
DIBBS
Small Business Subcontracting and Socioeconomic Compliance SupportThe contract seeks consulting support to assist a prime contractor in achieving small business subcontracting goals and ensuring full compliance with socioeconomic program requirements, including accurate reporting and proper disclosure of joint ventures. The scope of work is focused on providing expert guidance to navigate federal subcontracting regulations, help meet utilization targets for small, disadvantaged, and other designated business categories, and maintain documentation that satisfies federal audit and compliance standards. Support services will be delivered in alignment with NAICS code 541611 and are required to be performed at a designated location in San Diego, California, with a response deadline of August 20, 2026. The contract is issued under the Department of Defense and is intended to strengthen the prime contractor’s ability to fulfill its federal obligations related to small business participation and socioeconomic program adherence, with particular attention to transparency and regulatory accuracy in all subcontracting activities.
Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 483111
New
DIBBS
Transportation and Sea Shipment of Defense SuppliesThe contract solicits the sea transportation of defense supplies with strict adherence to DFARS 252.247-7023, requiring full compliance with Department of Defense shipping regulations. All shipments must include properly executed ocean bills of lading and detailed route planning to ensure secure, timely, and traceable delivery. The performance location is specified as San Diego, California, with the NAICS code 483111 identifying the scope as ocean transport of cargo. This is a subcontract opportunity issued by the Department of Defense under the San Diego agency, with a response deadline of August 20, 2026. The solicitation is hosted on the DIBBS platform, and all bidders must ensure their proposals address the regulatory, logistical, and documentation requirements mandated by federal defense transport standards.
Deep Sea Freight Transportation

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 811990
New
DIBBS
Defense Logistics Marking and Labeling ServicesThe contract seeks compliant labeling and marking services for defense supplies in accordance with Defense Logistics Agency standards, requiring precise application of critical identifiers including National Stock Number, contract number, alloy designation, lot number, and manufacturer information. All markings must meet strict DLA specifications to ensure traceability, regulatory compliance, and interoperability across military supply chains. The work is to be performed at the specified location in San Diego with a ZIP code of 92136-3581, and the subcontract is categorized under NAICS code 811990, indicating it pertains to other miscellaneous personal and household goods repair and maintenance services. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and is managed by the Department of Defense through its San Diego office. Although no solicitation number or set-aside details are provided, the contract is formally structured as a subcontract under the DLA framework, implying that the selected provider will operate under the oversight of a prime contractor or directly under DLA protocols. Bidders must ensure full alignment with DLA’s technical and procedural requirements for defense marking, and all submissions must be made through the designated DIBBS portal before the stated deadline.

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332812
New
DIBBS
Precision Metal Fabrication and CertificationThis contract requires the manufacture and certification of precision metal components that must fully comply with military specifications, including adherence to AMS and ASTM standards, ensuring the highest levels of quality and performance. All components must be produced with complete traceability throughout the manufacturing process, from raw material sourcing to final inspection, to guarantee authenticity, consistency, and reliability for defense applications. The work is classified as a subcontract under NAICS code 332812, and performance is expected to take place at a designated location in San Diego, California, with the Department of Defense as the overseeing agency. All deliveries must meet stringent quality controls and documentation requirements to satisfy federal defense standards. The solicitation was posted on August 9, 2026, with a firm response deadline of August 20, 2026, leaving a limited window for qualified manufacturers to submit proposals. Bidders must demonstrate proven experience in producing precision metal parts under military-grade constraints and be prepared to provide full technical documentation, certification records, and evidence of compliance with relevant aerospace and material standards. The contract does not specify a set-aside classification, meaning it is open to all eligible subcontractors regardless of business size or ownership structure. Participation requires direct engagement through the official DIBBS portal, and all submissions must align with the technical and administrative expectations outlined by the San Diego-based military office responsible for oversight.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 424690
New
DIBBS
Hazardous & Radioactive Materials Supply and PackagingThe contract pertains to the supply, packaging, labeling, and documentation of hazardous and radioactive materials in strict adherence to federal and military logistics and safety protocols. It requires full compliance with established standards to ensure safe handling, transportation, and accountability of sensitive materials throughout the supply chain. The work is to be performed at a designated location in San Diego with a zip code of 92136-3581, and the contractor must demonstrate expertise in managing regulated substances under rigorous federal oversight. This is a subcontract opportunity under NAICS code 424690, posted on August 9, 2026, with a mandatory response deadline of August 20, 2026. The contracting entity operates under the Department of Defense via the San Diego office, and the solicitation is managed through the DIBBS platform. Contractors must be prepared to meet stringent documentation requirements and possess the necessary certifications and infrastructure to handle materials that pose chemical, biological, or radiological risks, ensuring all activities align with Department of Defense and federal regulatory frameworks without exception.
Other Chemical and Allied Products Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541611
New
DIBBS
Small Business Subcontracting and Accelerated Payment AdministrationThe contract titled Small Business Subcontracting and Accelerated Payment Administration is a total small business set-aside under the SBA program, meaning only eligible small businesses can compete for it. It requires the contractor to administer subcontracting efforts specifically directed toward small business concerns including Women-Owned Small Businesses, Service-Disabled Veteran-Owned Small Businesses, HUBZone firms, and 8(a) participants. A core component of the contract is the implementation of accelerated payment terms as mandated by FAR clauses to ensure timely cash flow for these designated small businesses. The work is scoped under NAICS code 541611 and will be performed in San Diego, CA, with a response deadline of August 20, 2026. The contract is being managed by the Department of Defense through its San Diego office, and all activities must align with federal contracting requirements to foster small business participation and financial stability within the subcontracting chain.
Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military-Grade Packaging and Preservation ServicesThe contract requires the provision of military-grade packaging, preservation, and marking services in full compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring items are properly prepared for long-term storage and secure transport under demanding defense conditions. All work must meet strict U.S. Department of Defense specifications for durability, environmental protection, and clear identification, with adherence to standardized labeling and documentation protocols to support inventory tracking and logistics readiness across the supply chain. This is a total small business set-aside under the SBA program, exclusively available to small businesses as defined by the NAICS code 561910, which covers other support services. The opportunity was posted on August 9, 2026, with a response deadline of August 20, 2026, and is issued under the agency name SAN DIEGO, with the place of performance located in San Diego, California, ZIP 92136-3581. The contract is classified as a subcontract and is accessible through the DIBBS portal for qualified small business contractors seeking to fulfill defense packaging and preservation requirements.
Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazard Warning Label Design and Compliance ServicesThe contract seeks a small business to design and maintain hazard warning labels for shipments in full compliance with the Occupational Safety and Health Administration’s Hazard Communication Standard and the Defense Federal Acquisition Regulation Supplement. The work requires ongoing updates to label content whenever regulatory requirements change or product formulations are modified, ensuring continued adherence to federal safety and defense procurement standards. This service is critical for accurate hazard communication across military and defense supply chains, where compliance directly impacts worker safety and contractual obligations. The solicitation is a total small business set-aside under NAICS code 541690, indicating it is reserved exclusively for small businesses as defined by the Small Business Administration. The contract is classified as a subcontract and is managed by the Department of Defense under the San Diego office, with performance required at the location specified by the zip code 92136-3581. Interested parties must submit responses by the deadline of August 20, 2026, and the opportunity is posted on the DIBBS platform for procurement transparency and access.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333999
New
DIBBS
Supply of Hazardous Material-Containing Equipment (Non-Commercial)The contract entails the supply of 28 units of industrial equipment that contain hazardous materials, requiring full compliance with OSHA regulations as well as MIL-STD packaging and labeling standards to ensure safe handling, transport, and use. This is a non-commercial subcontract issued under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond. The North American Industry Classification System code 333999 applies, indicating the equipment falls under other industrial machinery manufacturing. Performance of the contract is specified to occur in San Diego, California, with the zip code 92136-3581 as the designated place of performance. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is managed by the Department of Defense under the San Diego agency. All proposals must adhere strictly to federal standards for hazardous material containment and documentation to meet military and occupational safety requirements.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Regulatory and Technical Compliance SupportThe contract requires comprehensive support for Regulatory and Technical Compliance, specifically focused on ensuring adherence to National Stock Number (NSN) compliance, Defense Federal Acquisition Regulation Supplement (DFARS), and Federal Acquisition Regulation (FAR) requirements. Key deliverables include preparing and submitting technical documentation to the Defense Logistics Agency (DLA), managing hazard labeling in accordance with applicable standards, and handling RA001 and RP001 submissions, which are critical for logistics and materiel management within the Department of Defense. The work must be performed in San Diego, California, with the performance location designated as 92136-3581, and is intended to support defense supply chain operations through accurate and timely regulatory documentation. This is a subcontract under a Women-Owned Small Business Set-Aside, categorized under NAICS code 541690 for Other Scientific and Technical Consulting Services, and is being managed by the Department of Defense through its San Diego office. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, indicating a tight turnaround for proposals. All technical submissions must meet stringent DLA formatting and content standards, and compliance with all federal acquisition regulations is mandatory to avoid delays or disqualification. The contractor must demonstrate proven expertise in defense regulatory frameworks, hazard communication systems, and the specific documentation processes required for DLA logistics systems.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Freight and Delivery Logistics (FOB Origin to DLA San Diego)The contract requires the transportation of 200 flush valves from the origin point to DLA Distribution in San Diego under FOB Origin terms, meaning the buyer assumes responsibility for the goods once they are loaded at the origin. The contractor must manage all aspects of logistics including scheduling, real-time tracking, and delivery documentation through a signed Proof of Delivery. The work is classified as a subcontract under a Women-Owned Small Business Set-Aside, with the NAICS code 484220 indicating it falls under Truck Transportation of Freight. The opportunity was posted on August 9, 2026, and responses are due by August 20, 2026, with performance centered at the San Diego location with the zip code 92136-3581. The contracting agency is the Department of Defense through its San Diego office, and the solicitation is accessible via the DIBBS platform under reference number SPE8E826T5115.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Labeling, and Hazard Communication ComplianceThe contract requires full compliance with MIL-STD-129 and ASTM D3951 standards for the packaging, labeling, and hazard communication documentation of a 200-unit defense shipment. All packaging must meet military specifications for durability, identification, and handling, while labeling must include precise barcodes, serial numbers, and military-specific markings as defined by MIL-STD-129. Hazard communication must be fully documented with accurate, up-to-date Safety Data Sheets (SDS) aligned with ASTM D3951 requirements to ensure safe transport and handling of all materials. The work is designated as a Women-Owned Small Business Set-Aside under NAICS code 561910, and performance is expected at the San Diego location with ZIP code 92136-3581. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and the contract is structured as a subcontract under the Department of Defense. All deliverables must be submitted in full alignment with federal defense logistics standards, and failure to meet any specification may result in rejection or non-payment.
Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details