Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PLATE, METAL

Active
SPE7M2-26-T-6171Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of 11 plates of hot-rolled metal, each measuring 0.3125 inches thick, 50 inches wide, and 144 inches long, with overall surface treatment either sand blasted or pickled. Each plate must be marked in strict compliance with paragraph 25 of ASTM A480/A480M, including the DLA contract number, national stock number, specification number and revision, steel type or UNS designation, manufacturer’s test identification number, manufacturer’s name or trademark, and dimensions. The material must conform to ASTM A240/A240M-26, Revision 26, dated 04/01/2026, with a Class 304 Condition A specification, and quality assurance follows Reference QAP 13873 and ASTM A480/A480M-20A. Metal certification requirements are governed by CDRL-METALSCERT, and all technical and quality requirements are sourced from the DLA Master List of Technical and Quality Requirements. Packaging must adhere to MIL-STD-2073-1E and RP001 DLA Packaging Requirements, with marking consistent with MIL-STD-129 and special codes Z and ZZ as defined in ASTM A700. Preservation methods must avoid mercury or mercury-containing compounds in all stages, including packaging and preservation, and must comply with NAVSEA 5100-003D for any permitted exceptions. Ozone-depleting chemicals are strictly prohibited. The plates are to be delivered FOB origin in a single shipment of 11 units within 158 days, with no variance in quantity allowed, and must be sent to the specified DLA distribution facility in New Cumberland, PA. The contract is a total small business set-aside under NAICS code 331221, with a response deadline of August 20, 2026, and an original required delivery date of March 27, 2027.

General Info

11 hot-rolled 304 stainless steel plates, 0.3125" thick, ASTM A240-26, FOB origin, deliver to New Cumberland PA by March 27, 2027

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

331221 - Rolled Steel Shape ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

RFQ SPE7M2-26-T-6171 for DLA Land and Maritime Nuclear Reactor Program

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLATE,METAL
PLATE,METAL
HOT ROLLED<(>,<)>
0.3125 INCH THICK<(>,<)>
50 INCHES WIDE<(>,<)>
144 INCHES LONG<(>,<)>
SAND BLASTED OVERALL OR PICKLED OVERALL.
THE MARKING EACH PLATE HAS TO BE IN ACCORDANCE WITH PARAGRAPH 25 OF ASTM
A480/A480M. THE FOLLOWING INFORMATION HAS TO BE MARKED ON EACH PLATE:
DLA CONTRACT NUMBER<(>,<)>
NATIONAL STOCK NUMBER<(>,<)>
SPECIFICATION NUMBER AND REVISION<(>,<)>
TYPE OF STEEL (TYPE OR UNS DESIGNATION)
MANUFACTURER'S TEST IDENTIFICATION NUMBER
MANUFACTURER'S NAME OR TRADEMARK<(>,<)>
DIMENSIONS.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FULL AND OPEN COMPETITION APPLY
RQ015: QUALIFIED SUPPLIERS LIST FOR MANUFACTURERS (QSLM)/QUALIFIED
SUPPLIERS LIST FOR DISTRIBUTORS FOR
TROOP SUPPORT
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
SPE7M2-26-T-6171
SECTION B
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 2 IAW BASIC NON GOVT STD ASTM A240/A240M-26 REVISION NR 26 DTD 04/01/2026 PART PIECE NUMBER: CLASS 304 CONDITION A
TDP Rev A Gen 2 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev A Gen 2 IAW REFERENCE NON GOVT STD ASTM A480/A480M-20A REVISION NR 20 DTD 07/01/2020 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017685176 0001 PM 11.000
NSN/MATERIAL:9515002044574
DELIVERY (IN DAYS):0158
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE7M2-26-T-6171
SECTION B
PR: 7017685176 PRLI: 0001 CONT’D
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:D
UNIT CONT:FG OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW MIL-STD-163 PACKING Z = MIL-STD-163 MARKING IAW MIL-STD-129
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
SPECIAL PACKAGING CODES Z AND ZZ SHALL BE AS SPECIFIED IN ASTM A700.
VINYL OR PLASTIC COATED PRESSURE SENSITIVE LABELS ARE AUTHORIZED FOR ALL
MARKING ON STRUCTURAL SHAPES, PIECES SHIPPED LOOSE OR BANDED SECURED
LIFTS. SECURED LIFTS SHALL BE IDENTIFIED ON EACH END.
ADDITIONAL MARKING REQUIREMENTS: WHEN THE
CONTRACT OR ORDER REFLECTS TWO UNITS
(EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.)
SHIPMENT MARKINGS SHALL INCLUDE THE
QUANTITY OF BOTH UNITS. THIS MARKING
DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/26/2027 Original Required Delivery Date:03/27/2027
SPE7M2-26-T-6171 NSN/Part Number: 9515-00-204-4574 Quantity: 11 PM Purchase Request: 7017685176QTY: 11 Delivery: 158 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331221
New
DIBBS
Supply of Metal Bar Stock (NSN 9530-00-288-0658)The contract ensures the supply of military-grade metal bar stock designated by NSN 9530-00-288-0658, strictly adhering to Defense Logistics Agency packaging, marking, and delivery protocols to meet rigorous defense standards. This subcontract is part of the Department of Defense’s broader logistics framework, with production and fulfillment governed by NAICS code 331221, indicating the involvement of a specialized metal rolling and forging manufacturer. All items must be packaged, labeled, and shipped in full compliance with DLA specifications to ensure seamless integration into military supply chains, with performance requirements tied to precise quality and documentation controls. The contract was posted on August 9, 2026, and is administered under a DLA award with the reference number SPE8E424PQ521, though specific delivery locations and point of contact details are not provided.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 331221
New
DIBBS
Metal Plating and Sheet SupplyThe contract requires the supply of 135 units of corrosion-resistant steel sheets conforming to AMS 5517 Alloy 301, solution heat treated, cold rolled, descaled, with a thickness of 0.032 inches and a width of 36 inches, cut to whole-foot lengths in compliance with military specifications. All materials must meet exact dimensional and metallurgical standards to ensure performance in demanding environments. The procurement is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with the NAICS code 331221 indicating the industry classification for rolled metal product manufacturing. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and the place of performance is specified as San Diego, California, with a zip code of 92136-3581. The contracting agency is the Department of Defense under the office name Construction & Equipment MRO SVC I, indicating this supply supports maintenance, repair, and overhaul operations for military equipment. The procurement is listed on the DIBBS platform, and while no point of contact is provided, submissions must adhere to the outlined technical and compliance requirements to be considered for award.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
Corrosion-Resistant Steel Plate Manufacturing & SupplyThe contract calls for the manufacture and supply of six units of 0.500-inch thick, 36-inch by 96-inch corrosion-resistant steel plate made from COMP 4340 material, processed under hot rolling and annealing conditions with sheared edges to meet aircraft-quality standards. Full traceability is required for all materials and production processes, and each unit must be marked in accordance with military specifications to ensure compliance and accountability. The material must demonstrate proven resistance to corrosion while maintaining the structural integrity and mechanical properties expected in high-stakes aerospace applications. The contract is structured as a subcontract under the NAICS code 331221, indicating classification within the rolled metal product manufacturing sector, and is issued by the Department of Defense via the Depot Oklahoma office, with performance required at Tinker Air Force Base, Oklahoma, zip 73145-8000. Bids must be submitted by August 20, 2026, following a posting date of August 9, 2026, with no set-aside provisions specified, and the solicitation is accessible through the DIBBS platform.
DEPOT OKLAHOMA

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
High-Strength Metal Plate Supply (SAE AMS5862M Compliant)The contract calls for the supply of 0.375-inch thick, 36-inch by 36-inch metal plates that must fully comply with SAE AMS5862M and SAE AMS2807C specifications, ensuring material integrity for high-performance applications. Each shipment must be accompanied by complete material certification and the supplier must be listed on the Qualified Supplier List for Defense (QSLD) to validate compliance with aerospace and defense industry standards. The plates are intended for use in critical maintenance, repair, and overhaul operations under the Department of Defense, with performance delivery required at Tracy, California, 95304-5000. Bidders must submit proposals by August 20, 2026, and the solicitation is structured as a subcontract under NAICS code 331221, which classifies the industry as rolled metal product manufacturing. The requirement emphasizes traceability, documentation, and adherence to strict military-grade material standards.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
Hot-Rolled Metal Plate SupplyThe contract calls for the supply of eleven hot-rolled stainless steel plates, each measuring 0.3125 inches in thickness and 50 by 144 inches in surface area, compliant with ASTM A240/A240M-26 Class 304 Condition A specifications. All plates must be permanently marked according to ASTM A480/A480M and Defense Logistics Agency requirements to ensure traceability and conformance. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, specifically designated for small business concerns as defined by the Small Business Administration, and is classified under NAICS code 331221 for rolling and drawing of nonferrous metals. The offer deadline is August 20, 2026, with the request for quotation posted on August 9, 2026. The project is managed by the Nuclear Reactor Program within the Department of Defense, and the materials are to be delivered to a designated performance location in New Cumberland, Pennsylvania, with zip code 17070-5002. While the contracting office’s physical address and point of contact are not specified, the procurement is accessible via the DIBBS platform for registered participants. This solicitation emphasizes strict adherence to material standards and marking protocols to support high-integrity applications in nuclear reactor systems, and only small business entities are eligible to bid under this set-aside program.
NUCLEAR REACTOR PROGRAM

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
Manufacturing of 316L Stainless Steel BarsThe contract entails the production of 316L stainless steel bars meeting the specifications of SAE AMS2806, encompassing the full manufacturing sequence from melting and forging to pickling and dimensional verification, all to ensure compliance with Defense Logistics Agency standards. The output must adhere strictly to material and dimensional requirements, with quality control integrated at every stage to guarantee conformity and reliability for defense applications. The work is scoped as a subcontract under the Department of Defense, managed by the DDSP NEW CUMBERLAND FACILITY, with performance designated to occur in New Cumberland, Pennsylvania, 17070-5002. The solicitation issued under NAICS code 331221 for primary metal manufacturing was posted on August 9, 2026, with responses required by August 20, 2026. All production activities must align with federal defense procurement mandates, ensuring traceability, documentation, and inspection protocols are fully implemented to meet DLA regulatory expectations.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
Metal Sheet Supply (Aluminum/Steel Plate)The contract requires the supply of 40 sheets of metal specified under NSN 9535005963789, with strict adherence to defined grade, alloy, temper, dimensions, and preservation standards. All material must be delivered in whole-foot lengths with zero variance in size, ensuring precision and consistency for intended applications. The sheets are to be aluminum or steel plate as implied by the contract title, and compliance with all technical specifications is mandatory to meet operational requirements. The contract is a subcontract issued by the Department of Defense through the Depot Oklahoma office, with performance located at Tinker AFB, Oklahoma, ZIP 73145-8000. It was posted on August 9, 2026, and responses are due by August 20, 2026. The NAICS code 331221 indicates classification under Aluminum Rolling, Drawn, and Extruded Material Manufacturing. The solicitation number SPE8E426T2074 is the primary identifier for proposal submission, and all interested parties must adhere to the outlined specifications and deadlines without exception.
DEPOT OKLAHOMA

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
PLATE, METAL
Solicitation # SPE8E9-26-T-3410
The contract specifies the procurement of a metal plate measuring 0.375 inches thick by 36 inches wide by 36 inches long, weighing approximately 138.99 pounds per piece, with technical compliance governed by SAE AMS5862M and SAE AMS2807C standards. The material must be supplied only by companies listed on the Qualified Suppliers List for Distributors (QSLD), and any deviation from this requirement must be explicitly declared by the offeror; noncompliance may result in criminal penalties. A Certificate of Quality Compliance, including mill material certification, is mandatory for every shipment and must be submitted to both the receiving depot and the DLA Troop Support Contracting Officer. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stated, and critical attributes are subject to stringent verification levels. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with special preservation codes Z and ZZ as defined by ASTM A700, and all shipments must include dual-unit quantities where applicable. Delivery is FOB origin with no quantity variance permitted, and the product must be delivered within 62 days to the designated DLA warehouse in Tracy, California. The contract references multiple DLA technical and quality requirements, including CDRL-METALSCERT, and all documentation, including certifications and compliance statements, must align with the revisions in effect on the solicitation date.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-T-3408
The contract specifies the procurement of 135 sheets of corrosion-resistant steel, AMS 5517 Alloy 301, solution heat treated, cold rolled, descaled, with a thickness of 0.032 inches, width of 36 inches, and length in whole feet increments. Each sheet must be marked with the DLA contract delivery order number, NSN, specification revision, grade, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions, using stenciling or stamping that is legible, waterproof, and non-contaminating. A Certificate of Quality Compliance must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. All packaging must comply with MIL-STD-2073-1E and DLA’s RP001 requirements, including robust corner and edge protection, full top and bottom fiberboard coverage, and labeling per MIL-STD-129 with special codes Z and ZZ as defined in ASTM A700. Shipment markings must include both units of measure when applicable, such as lb-sh. Delivery is FOB origin with a strict 46-day timeline, inspection and acceptance occur at destination, and no quantity variance is permitted. Only suppliers on the Qualified Suppliers List for Distributors (QSLD) are eligible, and any deviation from this requirement constitutes a bid exception that must be explicitly stated. Failure to comply with any requirement, including marking, packaging, or supplier qualification, may result in rejection of goods or criminal penalties. The materials are to be delivered to three DLA distribution centers in San Diego, Tinker AFB, and Warner Robbins, with transportation governed by DLA procedural notes C19 and C20.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2064
The contract specifies the procurement of 5 units of iron alloy 660, A-286, flat bars measuring 0.380 inches across flats, 1.630 inches in length, and 0.310 inches thick, compliant with SAE AMS5853E and referenced quality standards. All material must be supplied in whole-foot lengths and meet strict dimensional tolerances. Each bar must carry continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and grade, manufacturer’s name, heat and lot number, and exact dimensions, applied via stamping or stenciling with legible, waterproof, and non-contaminating inks. Adhesive labels are required for bars under 0.250 inches in nominal OD, and tags are acceptable for wire forms. A Certificate of Quality Compliance, or mill-material certification, must accompany every shipment and be submitted to the DLA Troop Support Contracting Officer. Packaging must adhere to MIL-STD-2073-1E and RP001 requirements, with special preservation code ZZ per ASTM A700 and labeling per MIL-STD-129, including the special marking code ZZ for additional requirements. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and non-compliant offers must explicitly state their deviation; any product not sourced from an approved QSLD distributor constitutes an unauthorized substitution with potential criminal penalties. Quality conformance inspections and source inspection requirements are waived for QSLD-compliant suppliers, with certification documentation governed by CDRL-METALSCERT. The contract calls for delivery within 98 days to DLA Distribution San Diego, FOB origin, with zero quantity variance allowed. The NSN is 9510-01-617-8668, the unit price is $5.00 per unit, and the total contract value is $25.00. All materials must be palletized, protected, and shipped with markings that include dual unit quantities if applicable, and must conform to the specified TDP revisions and technical data requirements referenced in the DLA Master List of Technical and Quality Requirements.
SAN DIEGO

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331221
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-26-T-2070
Steel plate, corrosion resistant and aircraft quality, compliant with COMP 4340, hot rolled and annealed with sheared edges, is specified at 0.500 inches thick, 36 inches wide, and 96 inches long, with an approximate weight of 490 pounds per unit. The material must be supplied in whole-foot lengths only and meet strict dimensional tolerances. All units require continuous identification markings including the DLA contract delivery order number, NSN, specification number and revision, alloy and temper details, manufacturer’s name, heat and lot number, and exact dimensions. Markings must be applied via stamping or stenciling using waterproof, noncontaminating fluids that remain legible under normal handling; adhesive labels are authorized for smaller bars, tubes, and shapes under 0.250 inches nominal OD. A Certificate of Quality Compliance, or mill material certification, must accompany every shipment and be submitted to the DLA Troop Support Contracting Officer. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with preservation following ASTM A700 and marking in accordance with MIL-STD-129R. The product must be palletized and protected with appropriate dunnage to prevent damage, ensuring all materials are clean and dry. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond; noncompliant bids are considered exceptions and subject to rejection. The QSL program waiver applies to source inspection requirements such as COQC, PVT, and QAP-EQ003 for approved suppliers. Technical compliance is governed by referenced standards including SAE AMS6359, ASTM A700-14, SAE AMS2807C, and MIL-STD-129R. The contract calls for delivery of six units to Tinker AFB, Oklahoma, FOB origin, within 39 days, with a required delivery date of July 1, 2026. No quantity variance is permitted. The NSN is 9515-00-079-4576, and the procurement is under solicitation SPE8E4-26-T-2070 with a response deadline of August 20, 2026.
DEPOT OKLAHOMA

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331221
New
Federal
95--PLATE,METAL
Solicitation # SPE7M226T6158
The U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for 76 metal plates identified by NSN 9515002044573 under solicitation number SPE7M226T6158, which is a Small Business Set Aside for total award. The requirement is for delivery to W1A8 DLA Distribution with a mandatory delivery timeline of 161 days after award. All submissions must be made electronically via the SAM.gov portal, and no hard copies of the solicitation are available. Digitized technical drawings and military specifications can be accessed online. The solicitation was posted on August 6, 2026, with responses due by August 17, 2026, and is classified as a combined solicitation under NAICS code 331221 for forged steel and related products. The responsible procurement office is located in Columbus, Ohio, and all inquiries must be directed via email to the designated point of contact provided in the official solicitation document accessible through the SAM.gov link.
DLA Land And Maritime

POSTED

4 days ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 493190
New
DIBBS
Packaging, Preservation, and Shipment Labeling ServicesThe contract requires the provision of military-compliant packaging and preservation services for lock washers in accordance with MIL-STD-129 and ASTM D3951 standards, ensuring all items are properly protected, labeled, and prepared for shipment. This includes the accurate application of labeling requirements mandated by military specifications and the generation of receiving reports to document delivery and compliance. Work must be performed to meet stringent defense logistics protocols, with the place of performance designated at Hill AFB, Utah, 84056-5734. The contract is structured as a subcontract under NAICS code 493190 and is administered by the Department of Defense through the Nuclear Reactor Program. Responses are due by August 20, 2026, with the solicitation posted on August 9, 2026, and all activities must align with federal defense procurement timelines and quality benchmarks.
Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and Safety Data ManagementThe contract requires the provision of hazard warning labels and Safety Data Sheets for all hazardous materials utilized in production or packaging processes, with strict adherence to OSHA regulations and DFARS compliance standards. All documentation must accurately reflect the chemical composition, handling procedures, storage requirements, and emergency measures associated with each substance to ensure workplace safety and regulatory alignment. The work is specifically tied to operations at Hill Air Force Base, Utah, and falls under the NAICS code 541620 for management consulting services, indicating a focus on safety systems administration rather than direct material supply. The solicitation is structured as a subcontract and is open for responses until August 20, 2026, with proposals expected to demonstrate proven experience in regulatory compliance, label design, and SDS management within defense-related environments. Participation requires an understanding of federal procurement protocols and the ability to integrate safety documentation into existing production workflows without disruption.
Environmental Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
Precision Lock Washer Manufacturing and SupplyThe contract involves the manufacture and supply of 552 precision lock washers identified by NSN 5310-00-011-5093 and MS35338-65, strictly conforming to NASM35338 Revision 5 and ASME B18.21.1 Revision 9 specifications. These components are to be delivered FOB origin to Hill Air Force Base with a zip code of 84056-5734, meaning the buyer assumes all transportation costs and risks once the goods leave the supplier’s facility. The solicitation falls under the NAICS code 332722, categorizing it as a subgroup of forging, stamping, and pressing activities. The contract is structured as a subcontract and is posted under the Nuclear Reactor Program within the Department of Defense, indicating its application in a defense or nuclear-related system requiring high-precision, certified hardware. The response deadline is set for August 20, 2026, with the solicitation released on August 9, 2026, providing a window of eleven days for prospective suppliers to submit proposals. All deliveries must meet exacting military standards to ensure compatibility and reliability in critical operational environments.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
O-Ring Supply (AS3209-144)The contract entails the supply of 75 units of O-Rings with part number AS3209-144 and NSN 5331001675126, manufactured to comply with SAE AS3209C and SAE AMS7276J technical standards, ensuring compatibility and reliability for critical applications within the Nuclear Reactor Program. The requirement is structured as a subcontract under NAICS code 339991, indicating it falls under miscellaneous manufacturing, and the deliverables must be performed at the specified location in Norfolk, Virginia, with a zip code of 23511-0001. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, providing a twelve-day window for submission, with no set-aside type designated for small business or other categories. The contract is administered by the Department of Defense under the Nuclear Reactor Program and can be accessed via the DIBBS platform for further procurement details.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 483110
New
DIBBS
Domestic & International Shipping Logistics (Non-Commercial Ocean Transport)This contract requires the management of compliant domestic and international shipping logistics for defense components, with strict adherence to DFARS 252.247-7023 mandating the use of U.S.-flag vessels for all ocean transport. The contractor must ensure full compliance with this regulation and be prepared to support waiver requests should exceptions be necessary. All shipments must meet defense-specific transportation standards, preserving security and regulatory integrity throughout the supply chain. The work will be performed in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is awarded as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to compete. The North American Industry Classification System code for this contract is 483110, indicating a focus on pipeline transportation. The opportunity was posted on August 9, 2026, with responses due by August 20, 2026, and is administered by the Department of Defense’s Nuclear Reactor Program.

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Packaging SupportThe contract seeks specialized support for regulatory compliance related to hazardous materials handling, focusing on the preparation of safety data sheets, accurate hazard labeling, and packaging engineering aligned with OSHA’s Hazard Communication Standard and Department of Defense requirements. Work will be performed at a designated location in New Cumberland, Pennsylvania, with a firm deadline for responses set for August 20, 2026, following a public posting on August 9, 2026. This is a subcontract opportunity under a Total Small Business Set-Aside, designated by the NAICS code 541690, which encompasses other scientific and technical consulting services. The sponsoring agency is the Nuclear Reactor Program within the Department of Defense, indicating the work is tied to defense-related operations requiring stringent adherence to federal and military safety protocols.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
Precision Switch Assembly ManufacturingThe contract calls for the manufacture and delivery of three military-grade switch assemblies identified by NSN 5930016055090 and part number 159400G1, all of which must comply with MIL-DTL-28786 for technical specifications and MIL-STD-2073-1E for preservation, packaging, and marking standards. These components are critical for defense applications and require strict adherence to military quality and documentation protocols. The work is designated as a total small business set-aside under SBA guidelines, meaning only small businesses qualified under FAR 19.5 are eligible to bid, with the North American Industry Classification System code 334419 specifically identifying the relevant manufacturing category. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and is structured as a subcontract under the Department of Defense’s Nuclear Reactor Program. The place of performance is specified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, indicating where final delivery and inspection will occur. Although no point of contact is listed, the contract can be accessed via the DIBBS platform using the provided link, and bidders must ensure full compliance with all federal acquisition regulations relevant to defense subcontracting, including documentation, timelines, and supply chain integrity.
Other Electronic Component Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for CUI (NIST SP 800-171)
Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Transportation Logistics
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and SDS Management
Environmental Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Marking Services for Defense Logistics
Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Manufacture of Nonmetallic Hose Assemblies
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details