This Solicitation opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
BAR, METAL
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
A 1.70-inch thick, 9.10-inch wide, and 40-inch long tungsten alloy bar of UNS R07050 is being procured under solicitation SPE8E4-26-Q-0303, with a firm fixed price and no variance allowed in quantity. The material must comply with ASTM B777 Revision D dated 12/01/2015 and be supplied in whole-foot increments only, conforming to specified minimum and maximum length requirements. All units must bear continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy grade and type, manufacturer’s name, heat and lot number, and dimensions, applied via stamping or stenciling with legible, waterproof, and non-contaminating inks. Adhesive labels are required for bars, tubes, and shapes under 0.250 inches in nominal OD, with tags permitted for wire. A Certificate of Quality Compliance must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. Packaging must adhere to MIL-STD-2073-1E and RP001, with marking in accordance with MIL-STD-129 and preservation per MIL-C-3993. The product is subject to covered defense information and incorporates technical and quality requirements from the DLA Master List, with certification requirements specified under CDRL-METALSCERT. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to quote; any deviation must be explicitly stated, and non-compliance constitutes an unauthorized substitution subject to criminal penalties. Inspection and acceptance occur at destination, with delivery required within 140 days after award, shipped via traceable freight to Tinker AFB, OK, and not by parcel post. The procurement is a total small business set-aside, and source inspection requirements are waived for QSLD-compliant suppliers.
General Info
Agency
NAICS
Place of Performance
3301 F AVE DR 22 BLDG 506, TINKER AFB, OK, 73145-9031, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
TUNGSTEN ALLOY
UNS R07050, FLAT
1.70 IN THK
9.10 IN W
40 IN LG
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
SPE8E4-26-Q-0303
SECTION B
SUPPLY/SERVICE: 9530-01-435-6424 CONT'D
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
TDP Rev A Gen 1 IAW BASIC NON GOVT STD ASTM B777 REVISION NR DTD 12/01/2015 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26033 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE8E4-26-Q-0303
SECTION B
SUPPLY/SERVICE: 9530-01-435-6424 CONT'D
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0001 9530-01-435-6424 1.000 EA $ _______________ $ ______________
BAR,METAL
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 140 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:ZZ CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:00 OPI:M PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW MIL-C-3993 PACKING Z = IAW MIL-C-3993 MARKING IAW MIL-STD-129
ADDITIONAL MARKING REQUIREMENTS: WHEN THE CONTRACT OR ORDER REFLECTS TWO UNITS (EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.) SHIPMENT MARKINGS SHALL INCLUDE THE QUANTITY OF BOTH UNITS. THIS MARKING DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
FB2039
FB2039 DD DEPOT OK CNTR RECVG
CP 405 855 7075
3301 F AVE DR 22 BLDG 506
TINKER AFB OK 73145-9031
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB2039
FB2039 DD DEPOT OK CNTR RECVG
CP 405 855 7075
3301 F AVE DR 22 BLDG 506
TINKER AFB OK 73145
US
M/F: (TCN) FB203961130847
RDD: 777
PROJ: TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 0A ADV: FC: 6C
SPE8E4-26-Q-0303
SECTION B
SUPPLY/SERVICE: 9530-01-435-6424 CONT'D
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7016529208 0001 N/A N/A N/A 04/28/2026
SPE8E4-26-Q-0303 NSN/Part Number: 9530-01-435-6424 Quantity: 1 EA Purchase Request: 7016529208QTY: 1 Delivery: 140 days ADO
More opportunities from Department Of Defense → Defense Logistics Agency
Same awarding agency