Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BAR, METAL

Active
SPE8E4-26-Q-0311Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Copper alloy 630 bar, rolled round and annealed, with a diameter of 3.250 inches and lengths between 10 and 12 feet in whole-foot increments, is subject to strict technical and quality standards under this procurement. The material must conform to SAE AMS4640J, ASTM B249/B249M-23, and ASTM B900-16 specifications, with a reference density of 23.723 pounds per foot. A Certificate of Quality Compliance, including mill-material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. All units must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer name, heat and lot number, and dimensions using legible stamping or stenciling that does not contaminate the product; adhesive labels are required for bars under 0.250 inches nominal OD. Packaging must adhere to MIL-STD-2073-1E and RP001, with preservation following ASTM B900 and marking in compliance with MIL-STD-129R, including special identifiers for dual-unit shipments. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation from this requirement must be explicitly declared; non-compliant products are considered unauthorized substitutions with potential criminal penalties. Source inspection requirements are waived for QSLD-compliant suppliers. The material is designated as a critical application item, and delivery is required within 125 days after award to the DLA Distribution facility in New Cumberland, Pennsylvania, under firm fixed price terms with a 10% quantity variance allowance.

General Info

Copper alloy 630 bar, 3.250 inch diameter, 10–12 ft lengths, per AMS4640J, ASTM B249/B900, QSLD only, delivered to New Cumberland in 125 days.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

331420 - Copper Rolling, Drawing, Extruding, and AlloyingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E4-26-Q-0311 for Metal Copper Alloy 630 Rolled Round Annealed

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Drew Reily
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BAR<(>,<)> METAL
COPPER ALLOY 630
ROLLED, ROUND, ANNEALED
3.250 IN DIA
10 TO 12 FT LG
23.723 LB/FT (REF)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers
SPE8E4-26-Q-0311
SECTION B
SUPPLY/SERVICE: 9530-00-508-8789 CONT'D
List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AMS4640J REVISION NR J DTD 11/01/2023 PART PIECE NUMBER: ALLOY UNS C63000 TEMPER TQ50
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AMS-STD-185A REVISION NR A DTD 03/01/2014 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD ASTM B249/B249M-23 REVISION NR DTD 10/01/2023
SPE8E4-26-Q-0311
SECTION B
SUPPLY/SERVICE: 9530-00-508-8789 CONT'D
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD ASTM B900-16 (R 2022) REVISION NR DTD 10/01/2016 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0001 9530-00-508-8789 35.000 FT $ _______________ $ ______________
BAR,METAL
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 125 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:00 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW ASTM B900 PACKING Z = IAW ASTM B900 MARKING IAW MIL-STD-129
ADDITIONAL MARKING REQUIREMENTS: WHEN THE CONTRACT OR ORDER REFLECTS TWO UNITS (EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.) SHIPMENT MARKINGS SHALL INCLUDE THE QUANTITY OF BOTH UNITS. THIS MARKING DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
SPE8E4-26-Q-0311
SECTION B
SUPPLY/SERVICE: 9530-00-508-8789 CONT'D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7016564944 0001 N/A N/A N/A 11/16/2026

SPE8E4-26-Q-0311 NSN/Part Number: 9530-00-508-8789 Quantity: 35 FT Purchase Request: 7016564944QTY: 35 Delivery: 125 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331420
New
Federal
PIPE,METALLICThis contract, issued under solicitation number N0010426QFF36 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, mandates the supply of metallic pipe meeting stringent military specifications for critical shipboard applications. The material, designated as SPECIAL EMPHASIS Level I, must comply with MIL-P-24691/3 for corrosion-resistant stainless steel seamless pipe of 1-inch nominal size and Schedule 80, with strict requirements for ultrasonic and shear wave testing, chemical and mechanical certification per DI-MISC-81020, and full traceability from heat lot to final product. All items must be seamless, free from mercury contamination, and marked permanently and temporarily per MIL-STD-792 and SAE AMS standards, with traceability numbers directly linked to certified test data. Material must originate from single heats if fewer than five pieces are supplied, and any deviation from specifications requires formal approval via the ECDS system. The contract enforces rigorous quality assurance protocols, including mandatory ISO-9001 and ISO-17025-compliant quality systems, with documented procedures subject to government audit. All certification documentation, including test reports and certificates of compliance, must be submitted via WAWF to Portsmouth Naval Shipyard prior to shipment, with delivery scheduled for 365 days post-certification acceptance. Government inspection occurs at destination, and acceptance is contingent upon 100% verification of traceability markings, certification completeness, and zero-defect sampling per ANSI/ASQ Z1.4 for lot acceptance. The award process is CLIN-specific, allowing for multiple vendors, and prohibits quantity discounts across combined CLINs. The contract includes full Buy American, Small Business Set-Aside, and Warranty provisions, with a 365-day warranty period following acceptance. Contractors must submit engineering change proposals for any configuration changes and adhere to strict documentation, data submission, and security protocols as directed by NAVSEA and Navy directives, with all submissions routed through ECDS and WAWF systems.
Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 331420
New
DIBBS
Copper Alloy Metal Bar ManufacturingThe contract entails the manufacture of cold-drawn, stress-relieved copper alloy bars conforming to military and ASTM standards for delivery to DLA Cherry Point, located at 28533-5040. The work is classified as a subcontract under NAICS code 331420, which pertains to metal forgings and stampings, indicating specialized production of high-integrity metallic components. All materials must meet exacting technical specifications to ensure performance in defense applications, with compliance to both federal military requirements and recognized ASTM practices being mandatory for qualification and acceptance. The contract was posted on July 16, 2026, with proposals due by July 24, 2026, and the prime entity managing the procurement is the Department of Defense through its Cherry Point facility. Performance is required at the designated location in Cherry Point, North Carolina, with no additional administrative set-aside or organizational restrictions specified, leaving the opportunity open to qualified subcontractors capable of fulfilling the technical and delivery obligations.
CHERRY POINT PHANTOM RD BLDG

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331420
New
DIBBS
BAR, METALThis contract specifies the procurement of a copper alloy 630 metal bar, annealed, with a diameter of 9.500 inches and a length of 1.000 foot, though the ordered quantity is 4.000 feet in total, to be delivered in whole-foot increments only. The material must conform to technical standards including ASTM B150/B150M, ASTM B249/B249M-23, ASTM B900-16 (R2022), MIL-STD-129R, and SAE AMS-STD-185A, with all specifications referenced in the Technical Data Package Rev B Gen 2. A Certificate of Quality Compliance, or mill material certification, is mandatory for every shipment and must be provided to both the customer and the DLA Troop Support Contracting Officer. Each unit must be clearly marked with the DLA contract delivery order number, NSN, specification number and revision, alloy and temper, manufacturer’s name, heat and lot number, dimensions, and other required identifiers using stamping or stenciling that is legible, waterproof, and non-contaminating. Adhesive labels are required for bars under 0.250 inches nominal OD, and tags are acceptable for wire. All packaging must follow MIL-STD-2073-1E and DLA packaging requirements, with preservation and marking conforming to ASTM B900 and MIL-STD-129, and palletization must also meet RP001 standards. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) as defined by DLA Troop Support, June 1994, and only approved QSLD distributors are eligible for award; any deviation must be explicitly declared, and non-compliance may result in criminal penalties. Source inspection requirements are waived for awards based on QSLD compliance, and CDRL-METALSCERT-26124 applies for material certification documentation. The contract is a firm fixed price with a 10% variance allowance on quantity and requires delivery within 95 days after placement. Inspection and acceptance occur at destination, with FOB origin. The item is part of a total small business set-aside, and the delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania. Continuous identification and compliance with all marking and certification requirements are enforceable conditions, and failure to meet any
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331420
New
DIBBS
TUBE ASSEMBLY, METALThe contract pertains to the procurement of one metal tube assembly with NSN 4710-01-619-9285 and part number 3847AS259-1, issued under solicitation SPE7M4-26-T-265K by the Defense Logistics Agency. The item must be delivered within 20 days to the designated military logistics facility in Jacksonville, North Carolina, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination point, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 standards, using the specified packaging methods, materials, and codes, including the U pack code and D3 unit container. Special markings are prohibited, and palletization must adhere to DLA packaging requirements. The item is designated for immediate transport by the fastest traceable means, explicitly excluding parcel post, and is associated with project BK1 TP 2 and RDD 777. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or amendment date if applicable. The contract requires removal of any government identification from non-accepted supplies and mandates that the supplier provide delivery confirmation and compliance documentation to the designated point of contact, Rory O’Reilly, at the Fluid Handling Division of the Department of Defense. The purchase request number is 7017509489, and the unit price is set at $1.00 for the single delivery unit. Shipment must be directed to MCAS New River, Building AS4085, with a required delivery date of July 14, 2026. The supply chain data and unit of issue conversions must align with DLA’s official guidelines, and all logistics are subject to DLA procedural notes C19 and C20 for vessel and first-destination transportation. Government-use fields indicate internal tracking codes for inventory and distribution control, and the solicitation is closed to the public with no set-aside designation applied.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 331420
New
DIBBS
BAR, METALThis contract specifies the procurement of cold drawn, stress relieved copper alloy 642 bar stock with a diameter of 1.750 inches and lengths between 8 and 12 feet in whole foot increments, at a reference weight of 7.937 pounds per foot. The material must conform to ASTM B150/B150M Revision D dated April 1, 2019, and other referenced standards including ASTM B249/B249M-23 and ASTM B900-16, with full compliance required for metallurgical properties, dimensions, and finish. A Certificate of Quality Compliance must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer, and each unit must be identifiably marked with the contract number, NSN, specification revision, alloy, manufacturer details, heat and lot numbers, and dimensions using approved methods such as stenciling or stamping—adhesive labels are required for smaller diameter bars. Markings must be durable, waterproof, and non-contaminating, with no mercury or mercury-containing compounds permitted except in specific functional components as outlined. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to quote or be awarded this contract, and any deviation from this requirement must be explicitly declared, with non-compliance constituting an unauthorized substitution that may result in criminal penalties. The government waives source inspection requirements for QSLD-compliant suppliers, relieving them of certain quality conformance inspections. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with preservation methods in line with ASTM B900 and marking per MIL-STD-129R, including dual-unit labeling when applicable. The delivery point is Cherry Point, NC, with a firm fixed price structure, a 10% quantity variance allowance, and a 65-day delivery timeline from award. The item is designated as critical, and its technical data package references multiple revision-controlled standards, with all documentation subject to DLA’s master list of technical and quality requirements.
CHERRY POINT PHANTOM RD BLDG

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331420
New
DIBBS
TUBE ASSEMBLY, METALThis contract is for the procurement of a metal tube assembly identified by NSN 4710-01-605-2172 and part number 65317-03127-070, with a quantity of five units required under solicitation SPE7M4-26-T-265G. Delivery is scheduled for 168 days after award, with FOB origin terms and inspection and acceptance occurring at the destination facility in Cherry Point, North Carolina. Packaging must comply with ASTM D3951 and MIL-STD-129, subject to stricter DLA packaging requirements, and all items must be palletized in accordance with DLA’s procurement standards. The contract mandates full compliance with the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality controls, supply chain traceability documentation as per DLA Directive Procurement Note C03, and removal of government identification from non-accepted supplies. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and the contractor must retain traceability records throughout the supply chain. Sampling for quality acceptance follows Sikorsky Corporation’s alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. No unit identification marking is required per customer request, though all items must be marked and labeled correctly. The contract is classified as a critical application item, and sourcing must first use approved commercial sources before engaging organic manufacturing channels if needed. The delivery deadline is December 12, 2026, with a need ship date of January 12, 2027, and the单价 is $5.00 per unit, totaling $25.00.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 331420
New
DIBBS
TUBE, BENT, METALLICThe contract pertains to the procurement of 34 units of bent metallic tubing, identified by NSN 4710-01-577-2429 and part numbers 23535263 and 23538503, supplied by Rolls-Royce Solutions America Inc and Daimler Truck North America LLC. Delivery is required within 126 days after order, with a specified delivery date of November 20, 2026, and all items must be shipped FOB origin to the Defense Distribution Depot New Cumberland facility in Pennsylvania. The contract mandates strict compliance with DLA packaging and labeling standards, requiring adherence to ASTM D3951 for packaging and MIL-STD-129 for all marking and barcoding, with the DLA Master List of Technical and Quality Requirements taking precedence over any conflicting standards. Palletization must follow RP001 guidelines, and the unit of issue and quantity per unit pack must be exactly as specified. Inspection and acceptance occur at the destination, with no variance allowed in quantity. All deliveries must be submitted electronically via WAWF, and payment requests must comply with electronic submission protocols. The contract includes numerous FAR and DFARS clauses governing cybersecurity, hazardous materials, whistleblower protections, small business representations, and export controls, with specific emphasis on compliance with the Hazard Communication Standard and prohibitions on hexavalent chromium and covered defense telecommunications equipment. Offerors must provide their UEI and CAGE code, affirm their small business status if applicable, and submit required certifications via SAM. No pricing information is included in the solicitation, and award is expected to be based on compliance with technical, packaging, and regulatory requirements under a firm-fixed-price structure, though evaluation factors and weighting are not disclosed.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 331420
New
DIBBS
BAR, METALThis contract specifies the procurement of copper alloy 715 metal bars in round, hard temper form, with a diameter of 3.000 inches and lengths between 6 and 8 feet, weighing approximately 27.396 pounds per foot. The material must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and all suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award. Non-compliance with the QSLD requirement constitutes a deviation and may result in rejection of the bid. The product must be accompanied by a Certificate of Quality Compliance with every shipment, and continuous identification markings are mandatory on each unit, including the DLA contract delivery order number, NSN, specification number, alloy, grade, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, waterproof, and applied via stenciling or stamping without contaminating the material. Adhesive labels are required for small-diameter bars, and tags are acceptable for wire. All packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with preservation and marking in accordance with MIL-C-3993 and MIL-STD-129R. The contract requires full compliance with the QSL program, and unauthorized substitutions may trigger criminal penalties. The delivery must occur within 95 days after award, with inspection and acceptance performed at destination, and pricing is firm fixed. Quantities may vary plus or minus 10 percent, and the material must be supplied in whole-foot lengths only. The item is designated as controlled defense information, and the technical data package references multiple military specifications including MIL-C-15726F, MIL-C-3993C, and MIL-STD-129R.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331420
New
Federal
W911S226U3702 COPPER ALUMINUM BAR The U.S. Government is seeking a total requirement of 24 feet in random length copper aluminum round bars under solicitation W911S226U3702, with Amendment 0001 specifically modifying the acceptance criteria to allow for this length specification. This contract is a combined synopsis and solicitation issued under a Total Small Business Set-Aside, meaning only businesses certified as small by the Small Business Administration are eligible to respond, as defined by FAR 19.5. The North American Industry Classification System code is 331420, identifying the procurement within the primary smelting and refining of nonferrous metal industry. The contracting office is the Office of W6QM Micc-Ft Drum within the Department of Defense, located at Fort Drum, New York, and the place of performance is listed as ZIP code 61299. The solicitation was posted on July 16, 2026, with responses due by July 23, 2026, at 4:00 PM Eastern Time. Primary point of contact is Cindy Jepsen, reachable by phone at 309-782-8389 or email at cindy.k.jepsen.civ@army.mil.
W6QM Micc-Ft Drum

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 331420
New
Federal
COPPER AND ALUMINUMThe U.S. Navy’s Naval Surface Warfare Center Crane is seeking copper and aluminum through a total small business set-aside solicitation under FAR 19.104-1, limiting eligibility to small businesses as defined by the SBA. The contract will be awarded under FAR 12.201-1 procedures with delivery required FOB Destination, and all offerors must be actively registered in the System for Award Management (SAM) with current annual confirmation. The solicitation number is N0016426Q0229, with a NAICS code of 331420, and responses must be submitted to amy Haworth and Andrew Ficklin via email no later than 12:00 AM Eastern Time on July 24, 2026. All updates, amendments, or modifications to the solicitation will be posted exclusively on Contract Opportunities at sam.gov, and it is the vendor’s responsibility to monitor the site regularly. Only offerors who submit quotes by the deadline will be notified of any post-deadline changes and considered for potential award. The point of contact is Rebecca Helton, reachable at the provided phone and email, with the performance location in Crane, Indiana.
Nswc Crane

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 331420
New
DIBBS
Domestic Raw Material Supply (Copper/Conductor Materials)The contract requires the supply of U.S.-sourced copper and insulation materials specifically for the production of military specification wire, with strict compliance to the Buy American Act and the Berry Amendment to ensure all materials originate entirely within the United States. The materials must meet exacting quality and sourcing standards to support defense-related wiring applications, and the subcontractor is expected to provide documented proof of domestic origin throughout the supply chain. Performance of the contract is designated for Tracy, California, with a delivery deadline for proposals set for July 27, 2026, and the solicitation was posted on July 15, 2026. The North American Industry Classification System code 331420 identifies the scope as copper and copper alloy manufacturing, aligning the contract with primary producers of refined copper and conductor materials used in defense electronics and electrical systems. This subcontract falls under the Department of Defense’s Maritime Supply Chain initiative, indicating the materials are intended to support naval or maritime defense platforms.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 331420
New
DIBBS
Precision Metal Stamping and Tube FabricationThe contract requires the manufacture of a precision metal tube assembly involving stamping, forming, and assembly processes to meet stringent military specifications. The work must be performed in San Diego, California, with a deadline for responses set for July 22, 2026, and the solicitation was posted on July 14, 2026. The North American Industry Classification System code is 331420, identifying it as a subcontract opportunity within the primary metal manufacturing sector. This effort is being managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, indicating its alignment with defense supply chain requirements and the need for full compliance with military standards for quality, durability, and performance.
ASC SUPPLIER OPER OEM DIVISION

POSTED

4 days ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 541690
New
DIBBS
Hazardous Material Compliance and LabelingThe contract titled Hazardous Material Compliance and Labeling requires the preparation of hazard warning labels and Material Safety Data Sheets in strict accordance with DFARS 252.223-7001 and OSHA hazard communication standards. This subcontract is issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY and is performance-based at the location in NEW CUMBERLAND, Pennsylvania, with a zip code of 17070-5002. The work falls under the NAICS code 541690, indicating it involves other scientific and technical consulting services, specifically focused on regulatory compliance for hazardous materials. All deliverables must meet federal defense and occupational safety requirements to ensure proper identification, handling, and communication of chemical hazards to personnel and stakeholders. The solicitation was posted on July 17, 2026, and responses are due by July 24, 2026, indicating a tight turnaround timeframe for qualified vendors. The contract is not set aside for any specific small business category, and no point of contact is listed in the provided details. Interested parties must access the full solicitation through the official DIBBS system via the provided UI link to ensure full compliance with submission procedures and technical specifications. Success in this contract depends on precise adherence to labeling formats, MSDS content, and regulatory alignment with both DOD and OSHA mandates, with noncompliance potentially leading to rejection or contract termination.
Other Scientific and Technical Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 561910
New
DIBBS
Compliant Packaging, Marking, and LogisticsThe contract requires precise packaging and marking of brass sheets in full compliance with MIL-STD-129R standards, ensuring all items are properly labeled with the National Stock Number, applicable specifications, manufacturer information, and specific heat or lot numbers for traceability. Hazard labels must be applied to meet Department of Defense Logistics Agency requirements, ensuring safe handling and regulatory adherence throughout the supply chain. All work must be executed to support DLA compliance, with attention to detail in labeling accuracy, label placement, and documentation alignment. The contract is categorized as a subcontract under NAICS code 561910 and is associated with the Department of Defense’s DDSP NEW CUMBERLAND FACILITY, with performance obligations centered at the location in New Cumberland, Pennsylvania, ZIP code 17070-5002. The solicitation was posted on July 17, 2026, and responses are due by July 24, 2026, providing a seven-day window for submissions. The contract emphasizes logistical readiness and regulatory precision, requiring suppliers to meet strict defense packaging norms without exception.
Packaging and Labeling Services

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
Quality Certification and Mill Testing ServicesThe contract requires independent metallurgical testing and certification of brass sheets to confirm compliance with Alloy 464 and MIL-C-3993C specifications, ensuring material integrity and adherence to military standards. Each shipment must be accompanied by a Certificate of Quality Compliance, issued upon successful verification of chemical composition, mechanical properties, and dimensional conformity. The work is to be performed as a subcontract under the NAICS code 541380, with performance location specified at NEW CUMBERLAND, PA, 17070-5002. The solicitation was posted on July 17, 2026, and responses are due by July 24, 2026. The contracting entity is the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, indicating this effort supports defense-related manufacturing and supply chain requirements.
Testing Laboratories and Services

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331492
New
DIBBS
Manufacturing of Naval Brass Sheet (Alloy 464, 1/2 Hard Temper)The contract calls for the fabrication of Naval Brass Sheet conforming to Alloy 464 in a 1/2 Hard temper, with precise dimensions of 0.0320-inch thickness, 24.00-inch width, and 48.00-inch length. All manufacturing processes including melting, rolling, and final cutting must adhere to military specifications to ensure material integrity and performance. Quality control procedures are required throughout production to validate compliance with dimensional tolerances and mechanical properties specified for the alloy. The work must be performed at the DOD facility in New Cumberland, Pennsylvania, with the ZIP code 17070-5002 as the designated place of performance. The solicitation is classified as a subcontract under NAICS code 331492 and was posted on July 17, 2026, with a response deadline of July 24, 2026. The contracting agency is the Department of Defense through its DDSP New Cumberland Facility, indicating this is part of a larger defense supply chain requiring certified materials and strict adherence to technical standards.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332322
New
DIBBS
SHEET, METALThe contract specifies the procurement of 15 sheets of brass naval metal, each measuring 0.0320 inches in thickness, 24.00 inches in width, and 48.00 inches in length, with a nominal weight of 11.20 pounds per sheet. The material must conform strictly to the dimensional requirements, with no test coupons permitted, and all sheets must be supplied in whole-foot lengths only. Compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory; only suppliers listed on the QSLD are eligible for award, and any deviation or use of non-approved distributors constitutes an unauthorized substitution that may trigger criminal penalties. The material must be supplied with a Certificate of Quality Compliance, which must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are required on every unit, including the DLA contract delivery order number, NSN, specification number, alloy grade, manufacturer’s name, heat and lot number, and exact dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material. Packaging must adhere to MIL-STD-2073-1E and RP001 DLA packaging requirements, including robust edge and corner protection, full-side coverage, and use of specified wrapping materials to prevent surface damage. The product must meet technical and quality standards referenced in the DLA Master List, including MIL-C-3993C and QAP 13873, and is subject to destination inspection and acceptance. The contract is firm fixed price with zero variance allowance, and delivery is required within 105 days after order date to the DLA Distribution facility in New Cumberland, Pennsylvania. All documentation and compliance are governed by DLA guidelines, and the QSL program waives certain inspection requirements for approved suppliers, except in foreign military sales cases.
Sheet Metal Work Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
New
DIBBS
BATTERY POWER SUPPLY

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332911
New
DIBBS
VALVE, PRESSURE REDU
Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333413
New
DIBBS
IMPELLER, FAN, AXIALThe contract pertains to the procurement of an axial fan impeller with part number BD1-9642-1 and NSN 4140-01-308-6651, requiring five units to be delivered within 167 days of contract award, with delivery terms specified as FOB origin and inspection and acceptance occurring at destination. The supplier must comply with stringent packaging and labeling directives including MIL-STD-2073-1E for preparation, MIL-STD-129 for marking, and DLA’s packaging requirements, with no tolerance allowed for quantity variance. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and are binding per the version in effect on the solicitation issue date. The item is designated as a critical application item, and government identification must be removed from non-accepted supplies. Packaging must adhere to the prescribed unit of issue, palletization standards, and special handling codes, with the delivery destination clearly defined as the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation was issued under contract number SPE8E7-26-T-3139 with a response Deadline of July 22, 2026, and a required ship date of December 21, 2026, while the original delivery window extends to June 11, 2027. The contracting office is the Department of Defense’s DDSP New Cumberland Facility, with Kelly Mitchell as the primary point of contact.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
New
DIBBS
CONVERTER, DIRECT CU

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339999
New
DIBBS
REEL ASSEMBLY, HOSEThe contract is for the procurement of two Reel Assembly, Hose units with NSN 4210-01-508-0874 and part number A31170033, under solicitation SPE8E6-26-T-3585, issued by the Department of Defense through the DDSP New Cumberland Facility. The delivery is scheduled for 156 days after award, with FOB origin terms and inspection and acceptance occurring at the destination. The unit price is $2.00 per unit, totaling $4.00 for the order, with no variance allowed in quantity. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951, and must follow MIL-STD-129 for marking and labeling. If the item is classified as hazardous per Fed-Std-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. Palletization must adhere to RP001 DLA packaging requirements. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is December 21, 2026, with an original delivery deadline of January 2, 2027. Transportation procedures are governed by DLAD Proc Notes C19 and C20. The item is designated as a critical application item, and all government identification must be removed from non-accepted supplies. The contract incorporates mandatory technical and quality specifications referenced by R and I numbers from the DLA Master List, with the revision in effect on the solicitation issue date controlling compliance.
All Other Miscellaneous Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SOLENOID
Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336310
New
DIBBS
VALVE, SOLENOID
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details