Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BAR, METAL

Active
SPE8E4-26-T-1992Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 14 feet of 4340 steel bar, annealed, with a diameter of 3.500 inches and a weight of 32.710 pounds per foot, compliant with SAE AMS6414N revision N dated March 1, 2023. The material must be supplied in whole-foot lengths of exactly 10, 11, or 12 feet, with all units marked with mandatory identification including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer name, heat and lot number, and dimensions. Continuous identification markings are required, and only stamping or stenciling are permitted, using waterproof, non-contaminating fluids that remain legible under normal handling. Adhesive labels are required for bars under 0.250 inches nominal OD, with tags acceptable for wire. A Certificate of Quality Compliance, or mill certification, must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. Packaging must follow MIL-STD-2073-1E, with special preservation codes Z and ZZ defined by ASTM A700, and marking conforming to MIL-STD-129 with the special code ZZ. Palletization must adhere to DLA packaging requirements, and parcel shipments must be addressed to the specified facility in Tracy, California. The delivery is FOB origin with a 139-day lead time and a required ship date of January 4, 2027, and the quantity may vary plus or minus 10 percent. Inspection and acceptance occur at the destination. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible, and non-compliance constitutes an unauthorized substitution with potential criminal penalties. The QSL program waivers apply for source inspection, relieving the need for certain quality conformance inspections. All documentation must reference the applicable CDRL-METALSCERT and technical data package revisions.

General Info

Procure 14 feet of 4340 steel bar, 3.500-inch diameter, per AMS6414N, FOB origin, QSLD only, ship by Jan 4, 2027.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

331110 - Iron and Steel Mills and Ferroalloy ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE8E4-26-T-1992.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressUS
Contacts
Drew Reily
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BAR,METAL
BAR, METAL
STEEL COMP 4340
ROUND, ANNEALED
3.500 IN DIA
10 TO 12 FT LG
32.710 LB/FT
SAE AMS6414N
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
SPE8E4-26-T-1992
SECTION B
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
TDP Rev B Gen 4 IAW BASIC NON GOVT STD SAE AMS6414N REVISION NR N DTD 03/01/2023 PART PIECE NUMBER:
TDP Rev B Gen 4
SPE8E4-26-T-1992
SECTION B
IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124
REVISION NR DTD 12/04/2025
PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE NON GOVT STD SAE AMS2806 REVISION NR D DTD 12/20/2018 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017422190 0001 FT 14.000
NSN/MATERIAL:9510005057355
DELIVERY (IN DAYS):0139
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:00 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW ASTM A700 PACKING Z = ASTM A700 MARKING IAW MIL-STD-129
IP083: Packaging, Marking, and Shipping of Metal Plating, Sheets, and other Metal Products SPECIAL PACKAGING CODES Z AND ZZ SHALL BE AS SPECIFIED IN ASTM A700. VINYL OR PLASTIC COATED PRESSURE SENSITIVE LABELS ARE AUTHORIZED FOR ALL MARKING ON STRUCTURAL SHAPES, PIECES SHIPPED LOOSE OR BANDED SECURED LIFTS. SECURED LIFTS SHALL BE IDENTIFIED ON EACH END.
ADDITIONAL MARKING REQUIREMENTS: WHEN THE CONTRACT OR ORDER REFLECTS TWO UNITS (EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.) SHIPMENT MARKINGS SHALL INCLUDE THE QUANTITY OF BOTH UNITS. THIS MARKING DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
SPE8E4-26-T-1992
SECTION B
PR: 7017422190 PRLI: 0001 CONT’D
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/04/2027 Original Required Delivery Date:11/11/2026
SPE8E4-26-T-1992 NSN/Part Number: 9510-00-505-7355 Quantity: 14 FT Purchase Request: 7017422190QTY: 14 Delivery: 139 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331110
New
DIBBS
Domestic Steel Raw Material SupplyThe contract calls for the supply of domestically produced steel bar stock or forged blanks compliant with ASTM A105 specifications, intended for machining into high-pressure pipe elbows. The material must meet stringent quality and performance standards to ensure suitability for high-pressure applications within critical fluid handling systems. All供货 must originate from within the United States to satisfy domestic production requirements, and suppliers are expected to demonstrate capability in consistent production, material traceability, and adherence to ASTM A105 chemical and mechanical property requirements. The solicitation is categorized as a subcontract under NAICS code 331110, which corresponds to iron and steel mill and ferroalloy manufacturing. Responses are due by August 17, 2026, with the opportunity posted on August 5, 2026. Performance of the contract will be centered at Tracy, California, with a zip code of 95304-5000, indicating likely delivery or staging points near this location. The awarding organization is the Fluid Handling Division under the Department of Defense, underscoring the critical nature of the components in military or defense-related infrastructure. While no set-aside type is specified, the emphasis on domestic production aligns with broader federal priorities for sourcing critical materials within the United States.
FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331110
New
DIBBS
Raw Material Supply – Domestic Steel Billets or IngotsThe contract calls for the supply of raw steel material designated as COMP 1010, which must meet rigorous military-grade specifications for use in the fabrication of structural components. All materials must be domestically sourced, ensuring compliance with requirements for U.S.-based production and supply chain integrity. The material is to be delivered in the form of steel billets or ingots, and the performance location is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. This is a subcontract under the Department of Defense, managed by the DDSP New Cumberland Facility, and falls under NAICS code 331110, which pertains to iron and steel mills and ferroalloy manufacturing. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with no set-aside designation specified. The contract is accessible through the DIBBS platform at the provided web link, and all proposals must align strictly with the technical and sourcing mandates outlined.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331110
New
DIBBS
Raw Material Supply of PH13-8MO Stainless Steel
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331110
New
DIBBS
Carbon Steel Cold-Rolled Bar SupplyThe contract calls for the supply of 281 linear feet of carbon steel cold-rolled bars, each measuring 0.500 inches in thickness and 4.00 inches in width, with individual lengths ranging between 10 and 12 feet. All materials must strictly comply with Department of Defense specifications and fulfill rigorous traceability requirements to ensure quality and compliance throughout the supply chain. The contract is structured as a subcontract under NAICS code 331110, indicating classification within the primary metals industry, and is managed under the Construction & Equipment MRO SVC I program by the Department of Defense. The place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, where delivery and fulfillment are expected to occur. Responses are due by August 17, 2026, with the solicitation posted on August 5, 2026, indicating a 12-day window for potential vendors to submit proposals. The contract is accessible via the DIBBS platform for detailed submission instructions and requirements.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331110
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-1957
This contract specifies the procurement of aluminum alloy high magnesium sheet metal with precise dimensions of 0.190 inches thick, 72.00 inches wide, and 240.00 inches long, weighing approximately 315.600 pounds per sheet. The material must conform to the qualified suppliers list for distributors (QSLD) as defined by DLA Troop Support, and only suppliers listed on the QSLD are eligible for award; any deviation must be explicitly stated by the offeror. Non-compliance may result in criminal penalties. The product must adhere to technical standards including ASTM B928/B928M-15, MIL-STD-129R, ASTM B666/B666M-20, and ASTM B660-23, with full metallurgical certification required for every shipment and a copy forwarded to the DLA Contracting Officer. Continuous identification markings are mandatory on each unit, including contract number, NSN, specification revision, alloy grade, temper, manufacturer, heat and lot number, and exact dimensions, with permitted marking methods limited to stamping or stenciling that ensures legibility and durability without contamination. The material must be supplied in whole-foot lengths only and packaged per MIL-STD-2073-1E with preservation methods compliant with ASTM B660 and marking as per MIL-STD-129. Unit of issue is sheet, with a quantity of six units required under procurement request 7017758407, delivered FOB origin to DLA Distribution San Diego by February 1, 2027, with zero tolerance for quantity variance. The contract prohibits test coupons and mandates full compliance with all technical, quality, packaging, and marking requirements referenced from the DLA Master List of Technical and Quality Requirements.
SAN DIEGO

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331110
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-26-T-1994
This contract specifies the procurement of a single metal plate made from nickel-copper alloy, class A, in form 6, with a hot-finished as-rolled condition. The plate measures exactly one inch in thickness, thirty-six inches in width, and one hundred twenty inches in length, weighing approximately 1,373.8 pounds per unit. The material must undergo ultrasonic testing to ensure structural integrity. Compliance with stringent quality and technical standards is mandatory, including adherence to specifications defined in the DLA Master List of Technical and Quality Requirements. Certification of quality compliance, including mill-material certification, is required with every shipment and must be submitted to the DLA Troop Support Contracting Officer. Continuous identification markings are mandatory on each unit, including the DLA contract number, NSN, specification revision, alloy grade, manufacturer details, heat and lot numbers, and dimensions, all presented in legible, waterproof, and durable stamping or stenciling that does not contaminate the material. The product must be sourced exclusively from suppliers listed on the Qualified Suppliers List for Distributors (QSLD), and any deviation from this requirement constitutes an unauthorized substitution with potential criminal penalties. Packaging must fully comply with MIL-STD-2073-1E and DLA packaging requirements, using the special codes Z and ZZ as defined in ASTM A700, and markings must conform to MIL-STD-129R. The plate must be supplied in whole-foot increments only, with no tolerance for partial lengths or test coupons. Delivery is FOB origin, with a required delivery date of March 17, 2027, and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. The contract is a total small business set-aside under NAICS code 331110, and all documentation, including CDRLs and technical data packages, must align with referenced standards such as MIL-STD-129, ASTM A700-14, and SAE AMS2807C. Violations of any marking, material, or supplier compliance requirements will result in rejection of the product.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331110
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2012
This contract specifies the procurement of 119 feet of cold drawn, stress relieved nickel alloy R-405 round bar with a diameter of 0.625 inches and lengths between 12 and 20 feet, delivered in whole-foot increments. The material must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including MIL-STD-129R for marking, ASTM A700-14 for preservation and packaging, and SAE AMS2806 for material certification. A Certificate of Quality Compliance, including mill material certification, is mandatory for every shipment and must be provided to both the recipient and the DLA Troop Support Contracting Officer. All units must be permanently marked with specific identifiers including the DLA contract number, NSN, specification revision, alloy, manufacturer name, heat and lot number, and dimensions using stamped or stenciled methods that are legible, waterproof, and non-contaminating. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award; non-compliant bids are considered exceptions and must be explicitly noted. The government waives source inspection requirements for QSLD-compliant suppliers, relying instead on supplier quality assurance processes. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with special preservation and marking codes Z and ZZ as defined by ASTM A700. The material must be delivered FOB origin to the specified DLA receiving warehouse in Tracy, California, by January 4, 2027, with a 10% quantity tolerance. The contract enforces strict compliance with the QSL program, and any unauthorized substitution may result in criminal penalties. Continuous identification markings are required on every unit, and adhesive labels are permitted for bars under 0.250 inches in diameter. Failure to meet any marking, packaging, or qualification requirement may lead to rejection of the product.
DLA DIST SAN JOAQUIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331110
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-1968
This contract specifies the procurement of aluminum alloy sheet metal with precise dimensional and material requirements: 0.050 inches thick, 48.00 inches wide, and 144.00 inches long, weighing approximately 33.50 pounds per sheet. The material must conform to alloy 5052 in the O-annealed temper, as defined by SAE AMS-QQ-A-250/8C and other referenced standards including ASTM B666/B666M-20 and ASTM B660-23. Strict compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory; only suppliers listed on the DLA Troop Support QSLD are eligible for award, and any deviation or use of non-approved distributors constitutes an unauthorized substitution that may trigger criminal penalties. All sheets must be supplied in whole-foot lengths only and must be marked with continuous identification including the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and exact dimensions, using approved methods such as stamping or stenciling that ensure legibility and durability without contamination. A Certificate of Quality Compliance, or mill material certification, must accompany each shipment and be forwarded to the contracting officer. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129R, with preservation governed by ASTM B660, and all units must be palletized as per DLA packaging requirements. Delivery is FOB origin, with no variance allowed in quantity, and the product must be delivered to Tinker AFB, Oklahoma, within 167 days of contract award. The contract explicitly waives source inspection requirements for QSL-compliant suppliers, with critical application status and technical data package requirements enforcing full adherence to all cited specifications.
DEPOT OKLAHOMA

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331110
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-26-T-1946
A metal plate made of aluminum alloy with a thickness of 3.500 inches, a width of 48.00 inches, and a length of 96.00 inches is being procured with a reference weight of 1612.80 pounds per piece. The item is identified by NSN 9535-00-508-8611 and is part of a single-unit purchase under Purchase Request 7017757998. The delivery is scheduled for 167 days after order placement. This item is subject to stringent export control regulations under ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, regardless of location, without prior approval from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled technical data, and only DLA contractors with an approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and approved access by the DLA controlling authority may receive or handle the information. The contract requires CMMC Level 2 certification by a certified third-party assessment organization for cybersecurity compliance. The solicitation is managed by the Department of Defense under office SAN DIEGO with a response deadline of August 17, 2026, and the contract data is accessible via the DIBBS portal.
SAN DIEGO

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331110
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2017
Copper alloy 630 square bar, hot or cold finished, measuring 2.500 inches across flats and 10 to 12 feet in length with a nominal weight of 23.100 pounds per foot, is being procured under solicitation SPE8E4-26-T-2017 with a total quantity of 30 feet. The material must conform to SAE AMS4640J and ASTM B249/B249M-23 standards, with a temper designation of HR50, and all shipments require a Certificate of Quality Compliance including mill certifications and detailed traceability data such as heat and lot numbers. Continuous identification markings are mandatory on each unit, including the DLA contract number, NSN, specification revision, alloy, manufacturer details, and dimensions, using stamping or stenciling that is permanent, legible, and non-contaminating; adhesive labels are required for bars under 0.250 inches in nominal diameter. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation from this requirement must be explicitly declared, as unauthorized substitutions may result in criminal penalties. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation per ASTM B900 and marking consistent with MIL-STD-129R, including special codes ZZ for special requirements. Delivery is FOB origin, with a 153-day delivery window and a need ship date of January 18, 2027. The contract allows for a 10% quantity variance and requires inspection and acceptance at destination. The solicitation is a total small business set-aside under NAICS code 331110, with technical and quality requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements and governed by specific DLA procurement notes including M03, RP001, RQ011, and IY010.
DEPOT OKLAHOMA

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331110
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-1950
This contract specifies the procurement of titanium alloy sheet metal with exact dimensions of 0.040 inches thick, 36.00 inches wide, and 120.00 inches long, weighing approximately 28.17 pounds per sheet. The material must conform to SAE AMS4901V and SAE AMS2809B standards, with a part number of UNS R50700, hot rolled and annealed, and must be supplied in whole-foot lengths only without test coupons or deviations from dimensional tolerances. The product is designated as a critical application item subject to stringent quality and traceability controls, requiring continuous identification markings on every unit that include the DLA contract number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and full dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contamination risk, with adhesive labels required for smaller profiles. A Certificate of Quality Compliance with mill certification is mandatory for every shipment and must be provided to both the recipient and the DLA contracting officer. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and any deviation from this requirement must be explicitly declared, as non-compliance constitutes an unauthorized substitution that may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and DLA’s packaging requirements, including robust edge and corner protection, full top and bottom coverage, and compliance with MIL-STD-129 for labeling. The contract mandates shipment to Warner Robins Air Force Base, Georgia, with delivery due in 167 days, and the quantity of five sheets is fixed with zero variance allowance. The solicitation references DLA procurement notes and technical documents governing quality, inspection waivers, and supply chain integrity, and all compliance is enforced at the destination inspection point. The vendor must be an approved QSLD distributor, and direct sales from non-U.S. manufacturers such as Thales are prohibited unless channeled through their authorized U.S. distributor, Oshkosh Truck Corp.
WARNER ROBINS

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331110
New
DIBBS
ANGLE, STRUCTURAL
Solicitation # SPE8E4-26-T-1974
This contract specifies the procurement of structural aluminum alloy angles made from 7075/T-6511 alloy, measuring 1.75 inches in height and width with a thickness of 0.125 inches, and supplied in 12-foot lengths at a reference weight of 0.520 pounds per foot. The total quantity required is 116 feet, to be delivered within 56 days to the DLA Distribution Cherry Point facility in North Carolina, with delivery terms FOB origin and a permissible quantity variance of plus or minus 10 percent. The material must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including full metallurgical certification and a Certificate of Quality Compliance with each shipment. Continuous identification markings are mandatory on every unit, including the DLA contract delivery order number, NSN, specification revision, alloy and temper designation, manufacturer’s name, heat and lot numbers, and dimensions, all applied via stamping or stenciling using waterproof, non-contaminating inks that remain legible after handling. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD), and any deviation from this requirement constitutes an exception that must be explicitly declared. The product must conform to specifications SAE AMS-QQ-A-200C and ASTM B666/B666M-20, and the Technical Data Package references CDRL-METALSCERT for material certification. Packaging must adhere to MIL-STD-2073-1E and ASTM B660, with Level A preservation requirements and marking in accordance with MIL-STD-129. Additional marking instructions require both units of measure to be displayed on shipment labels when applicable. All markings must be durable, waterproof, and free from adverse effects on material performance. The item is designated as a critical application item, and failure to meet any requirement—including improper qualification, marking, or certification—will result in rejection. The contract references DLA procedural notes for transportation and includes specific delivery, inspection, and acceptance points, with the final delivery deadline set for October 19, 2026.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

NAICS: 541690
New
DIBBS
Hazardous Materials Labeling and Compliance for Defense SupplyThe contract requires the provision of compliant hazard warning labels and Safety Data Sheets for hazardous materials shipped to DLA Distribution San Joaquin in Tracy, California, with strict adherence to OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and MIL-STD-129 marking specifications. All labels must accurately convey chemical hazards, precautionary statements, and product identification, while the accompanying SDS must follow the Globally Harmonized System format and be current, complete, and accessible to end users. The materials must be properly marked and documented to ensure regulatory compliance and operational safety throughout the defense supply chain. This subcontract, classified under NAICS code 541690, is issued by the Department of Defense through DLA Distribution San Joaquin and is open for responses until August 17, 2026. The place of performance is specified as Tracy, CA, with a ZIP code of 95304-5000. The solicitation is posted on the DIBBS platform under reference number SPE8E826T4992, and vendors must ensure their proposed solutions meet federal defense logistics requirements for hazard communication and material handling. Failure to comply with labeling or SDS standards may result in rejection of shipments and potential contract penalties.
Other Scientific and Technical Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541511
New
DIBBS
Electronic Invoicing and WAWF Submission ServicesThe contract requires the preparation and timely submission of electronic invoices and receiving reports through the Wide Area WorkFlow system in full compliance with DFARS 252.232-7003, covering both fixed-price and cost-type contract line items. This obligation ensures accurate, secure, and standardized digital documentation aligned with Department of Defense financial and procurement standards. The work is to be performed in Tracy, California, with a zip code of 95304-5000, and falls under a Total Small Business Set-Aside as defined by FAR 19.5, reserving the opportunity exclusively for small businesses certified by the SBA. The NAICS code 541511 indicates this is an information technology services contract, specifically focused on custom computer programming services related to invoice and reporting automation. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and is classified as a subcontract under the DLA San Joaquin office, part of the Department of Defense procurement network.
Custom Computer Programming Services

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
Specialty Item Supply: Controller, Special (NSN 4510251497100)The contract awards the supply of 28 units of CONTROLLER, SPECIAL with NSN 4510251497100 at a unit price of $28.00, requiring full compliance with packaging, labeling, and delivery specifications to Tracy, CA, with a zip code of 95304-5000. The procurement is structured as a subcontract under a Total Small Business Set-Aside, as defined by FAR 19.5, ensuring only small business concerns are eligible to respond. The North American Industry Classification System code is 334511, indicating the industry category tied to the manufacturing of navigational, Measuring, Electromedical, and Control Instruments. The solicitation was posted on August 5, 2026, with all responses due by August 17, 2026, and the awarding agency is DLA DIST SAN JOAQUIN under the Department of Defense, with performance obligations centered exclusively in Tracy, California.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (NIST SP 800-171) Assessment and ImplementationThe contract requires the implementation of NIST SP 800-171 cybersecurity controls to safeguard Controlled Unclassified Information within the covered systems. The contractor must complete a comprehensive self-assessment of compliance with all 110 security requirements outlined in the standard, document findings, and submit the resulting scorecard to the Supplier Performance Risk System. The effort also includes ongoing support for the protection of CUI through technical and procedural measures, ensuring alignment with federal guidelines, as well as readiness to report any cyber incidents in accordance with applicable DoD protocols. The work is scoped under a Total Small Business Set-Aside, meaning only small businesses registered with the SBA are eligible to bid, and the performance location is designated as Tracy, California with a zip code of 95304-5000. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, under the NAICS code 541512 for Computer Systems Design Services.
Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Military Packaging and Preservation ServicesThis contract requires the provision of military-compliant packaging, preservation, and marking services for defense-related materiel, strictly adhering to DLA standards and MIL-STD-129 requirements. The work involves the application of VCI corrosion inhibitors, desiccants, hermetic sealing techniques, and barcoding systems to ensure long-term protection, traceability, and compliance with federal military specifications. All packaging processes must be executed in a manner that guarantees the integrity of equipment and supplies during storage and transport under demanding operational conditions. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the SBA, with the NAICS code 332999 indicating it falls under Other Miscellaneous Manufacturing. Performance will take place at a designated location in Tracy, California, with a zip code of 95304-5000. Proposals must be submitted by the deadline of August 17, 2026, following the release date of August 5, 2026, and will be managed by the DLA San Joaquin office under the Department of Defense. Interested parties must access the solicitation through the official DIBBS portal to ensure full compliance with submission protocols.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThis contract requires the provision of comprehensive hazard communication labeling services for hazardous materials, ensuring full compliance with OSHA and MIL-STD-129 standards. The scope includes the preparation and submission of pre-award documentation, as well as detailed analysis of regulatory exceptions to support legal and operational adherence. All labeling must meet federal requirements for workplace safety and military logistics, with an emphasis on accuracy, clarity, and traceability throughout the supply chain. The work is to be performed at Tracy, California, with a 95304-5000 zip code designation, and the contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid. The NAICS code 541690 indicates this falls under other scientific and technical consulting services, specifically aligning with regulatory compliance and safety consulting activities. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with the contracting office affiliated with the Department of Defense through DLA Dist San Joaquin.
Other Scientific and Technical Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Precision Mechanical Component Manufacturing for Manual Control LeverThe contract calls for the manufacture of a precision manual control lever with NSN 5340003440745, a defense-grade mechanical component essential for industrial or military systems. Production must utilize casting or forging processes and require specialized tooling to meet exacting military standards, ensuring reliability and durability under demanding operational conditions. The work is designated as a total small business set-aside under SBA guidelines, meaning only small businesses are eligible to compete, and the NAICS code 332999 applies to other fabricated metal product manufacturing. Performance is required at Tracy, California, with a ZIP code of 95304-5000, and all deliverables must comply with defense-related specifications without exception. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, leaving a twelve-day window for qualified small businesses to submit proposals. The contracting entity is DLA Dist San Joaquin under the Department of Defense, and the contract is structured as a subcontract, indicating it supports a larger procurement effort. While no point of contact details are provided, the official solicitation can be accessed via the DIBBS portal using the provided link. All participants must ensure adherence to quality, timing, and regulatory requirements for defense production, with no allowances for non-compliance or deviations from the specified manufacturing methods.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: NA
New
DIBBS
Unable to Identify Subcontract OpportunitiesNo subcontract opportunities can be identified due to an inability to retrieve prime contract details, as system timeouts have prevented access to essential information such as scope, CLINs, agency specifics, and other metadata required for decomposition. The solicitation, posted on August 5, 2026, with a response deadline of August 17, 2026, is categorized as a subcontract under the DLA DIST SAN JOAQUIN agency within the Department of Defense, but no NAICS code, set-aside type, or point of contact is provided. The place of performance is listed as Tracy, California, with a zip code of 95304-5000, though the city, state, and country fields for the office address remain undefined. The contract’s full details are only accessible via the DIBBS system link, but attempts to extract actionable subcontract data have been thwarted by technical limitations.

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & LabelingThe contract titled Hazardous Materials Compliance & Labeling requires the provision of OSHA-compliant hazard communication materials for all hazardous substances contained in delivered items, specifically including Globally Harmonized System labels and Safety Data Sheets that meet federal regulatory standards. These materials must be accurately generated, formatted, and delivered in alignment with OSHA’s Hazard Communication Standard to ensure worker safety and regulatory adherence throughout the supply chain. The work is scoped to support items delivered to the specified place of performance in Tracy, California, with the ZIP code 95304-5000, and must be completed in accordance with all applicable federal safety and documentation protocols. This is a subcontract issued under NAICS code 541690 by the Department of Defense through DLA Dist San Joaquin, with a response deadline of August 17, 2026. The solicitation was posted on August 5, 2026, and all submissions must be received by the stated deadline to be considered. While no specific set-aside designation is provided, the contract is explicitly structured as a subcontract, implying it is part of a larger procurement effort. Contractors must be fully versed in GHS labeling requirements and SDS formatting to meet compliance obligations without delay or error, ensuring seamless integration into the recipient’s hazardous materials management system.
Other Scientific and Technical Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
Condensing Unit Supply (HVAC Equipment)The contract entails the supply of six commercial off-the-shelf condensing units identified by NSN 4130016572911, intended for use in refrigeration and cooling systems. These units must fully comply with military packaging and marking standards to ensure compatibility with defense logistics and handling protocols. The procurement is classified as a subcontract under the NAICS code 333414, which corresponds to HVAC equipment manufacturing. The offering is managed by DLA Dist San Joaquin under the Department of Defense, with the place of performance located in Tracy, California, at ZIP code 95304-5000. Solicitation for this contract was posted on August 5, 2026, and responses are due by August 17, 2026. All deliveries must meet the specified technical and logistical requirements, including adherence to military specifications for packaging and labeling, to support seamless integration into defense supply chains. The contract is not subject to any set-aside classifications and is accessible through the DIBBS platform for potential vendors seeking to respond.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Defense Logistics Shipment & Labeling ServicesThe contract requires the packaging, marking, and shipment of safety belts in strict accordance with MIL-STD-129 standards and the Defense Logistics Agency’s Vendor Shipment Module requirements. All items must be properly labeled, documented, and prepared for military logistics distribution, ensuring full compliance with federal defense shipment protocols. The work is to be performed at a designated location in Tracy, California, with the zip code 95304-5000 serving as the place of performance. This is a subcontract opportunity under the NAICS code 493190, which categorizes it under other warehousing and storage services, and is managed by the DLA Dist San Joaquin office under the Department of Defense. Bidders must submit responses by the deadline of August 17, 2026, with the solicitation posted on August 5, 2026. There is no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors regardless of size or certification status. Participation requires familiarity with DLA’s electronic vendor systems and adherence to stringent military packaging and identification guidelines. The contract is accessible via the DIBBS portal using the reference number SPE8E626T4031, and successful performers will support the defense supply chain by ensuring timely and accurate delivery of critical safety equipment to military endpoints.
Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling SupportThe contract requires the preparation of Safety Data Sheets and hazard warning labels for hazardous materials used in the manufacturing or packaging of safety belts, ensuring full compliance with OSHA and Department of Defense regulations. All deliverables must meet federal standards for hazard communication, accuracy, and readability, with strict adherence to mandated content, format, and language requirements. The work is tied to operations in Tracy, California, with the place of performance specified at ZIP code 95304-5000, and the solicitation is classified as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with the contracting activity managed by DLA Dist San Joaquin under the Department of Defense. While no set-aside type or specific point of contact is indicated, contractors must be prepared to demonstrate capability in handling classified or sensitive defense-related materials and producing compliant documentation under tight deadlines. All submissions must align with the DIBBS system referenced in the UI link, and successful offerors will be expected to support ongoing defense manufacturing efforts with reliable, audit-ready safety documentation.
Other Scientific and Technical Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details