Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BATTERY BOX

Active
SPE7L7-26-T-4589Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of two Battery Box units under solicitation SPE7L7-26-T-4589, with a NSN of 6160-01-541-9093, and requires delivery within 224 days from the award date to the DLA Distribution facility in New Cumberland, Pennsylvania. The items must be packaged in strict compliance with ASTM D3951, reinforced by and subject to the overriding requirements of the DLA Master List of Technical and Quality Requirements, and labeled per MIL-STD-129. Packaging must be palletized according to DLA’s RP001 specifications, and no variance is permitted in quantity—exactly two units must be delivered. Inspection and acceptance occur at the destination point, with the delivery term set as FOB Origin. All technical and quality attributes referenced in the contract are governed by the DLA Master List, and sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The product design is tied to multiple referenced drawings with revisions dating from 2002 to 2025, with the latest revision dated August 28, 2025, and all units must conform to TDP Rev B Gen 5 as specified. The required ship date is March 30, 2027, with an original delivery deadline of October 14, 2026. The contract is issued by the Department of Defense through the DLA Distribution facility, with Kurt Becka as the primary point of contact, and the unit of issue is each (EA).

General Info

Two Battery Box units, NSN 6160-01-541-9093, deliver by March 30, 2027, to New Cumberland, PA, per DLA specs, zero non-conformances.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332119 - Metal Crown, Closure, and Other Metal Stamping (except Automotive)View NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L7-26-T-4589 for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
KURT BECKA
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BATTERY BOX
BATTERY BOX
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TDP Rev B Gen 5 IAW BASIC DRAWING NR 19207 12486064 REVISION NR A DTD 08/06/2005 PART PIECE NUMBER:
TDP Rev B Gen 5 IAW REFERENCE DRAWING NR 19207 12414473 REVISION NR G DTD 01/18/2024 PART PIECE NUMBER:
TDP Rev B Gen 5 IAW REFERENCE DRAWING NR 19207 12417975 REVISION NR C DTD 02/23/2012 PART PIECE NUMBER:
TDP Rev B Gen 5 IAW REFERENCE DRAWING NR 19207 12420173 REVISION NR C DTD 10/01/2012 PART PIECE NUMBER:
TDP Rev B Gen 5 IAW REFERENCE DRAWING NR 19207 12420174 REVISION NR E DTD 12/06/2013 PART PIECE NUMBER:
TDP Rev B Gen 5 IAW REFERENCE DRAWING NR 19207 12420082
SPE7L7-26-T-4589
SECTION B
REVISION NR E DTD 02/26/2018
PART PIECE NUMBER:
TDP Rev B Gen 5 IAW REFERENCE DRAWING NR 19207 12421162 REVISION NR B DTD 09/11/2012 PART PIECE NUMBER:
TDP Rev B Gen 5 IAW REFERENCE DRAWING NR 19207 12419931 REVISION NR B DTD 12/12/2002 PART PIECE NUMBER:
TDP Rev B Gen 5 IAW REFERENCE DRAWING NR 19207 12422490 REVISION NR D DTD 09/21/2007 PART PIECE NUMBER:
TDP Rev B Gen 5 IAW REFERENCE DRAWING NR 19207 12414419 REVISION NR F DTD 08/29/2012 PART PIECE NUMBER:
TDP Rev B Gen 5 IAW REFERENCE DRAWING NR 19207 12420855 REVISION NR G DTD 11/01/2017 PART PIECE NUMBER:
TDP Rev B Gen 5 IAW REFERENCE DRAWING NR 19207 12421379 REVISION NR N DTD 06/24/2024 PART PIECE NUMBER:
TDP Rev B Gen 5 IAW REFERENCE DRAWING NR 19207 12414474 REVISION NR E DTD 09/22/2016 PART PIECE NUMBER:
TDP Rev B Gen 5 IAW REFERENCE DRAWING NR 19207 12422760 REVISION NR D DTD 10/01/2012 PART PIECE NUMBER:
TDP Rev B Gen 5 IAW REFERENCE DRAWING NR 19207 12423452 REVISION NR A DTD 10/09/2006 PART PIECE NUMBER:
TDP Rev B Gen 5 IAW REFERENCE DRAWING NR 19207 12414315 REVISION NR G DTD 08/28/2025 PART PIECE NUMBER:
TDP Rev B Gen 5 IAW REFERENCE DRAWING NR 19207 12486065 REVISION NR A DTD 08/04/2005 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7L7-26-T-4589
SECTION B
PR: 7017528295 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017528295 0001 EA 2.000
NSN/MATERIAL:6160015419093
DELIVERY (IN DAYS):0224
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/30/2027 Original Required Delivery Date:10/14/2026
SPE7L7-26-T-4589 NSN/Part Number: 6160-01-541-9093 Quantity: 2 EA Purchase Request: 7017528295QTY: 2 Delivery: 224 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332119
New
Federal
53--SHIM
Solicitation # N0038325QTL86
This contract pertains to the procurement of a shim with the solicitation number N0038325QTL86, issued by the Navy's Naval Supply Systems Command Weapon Systems Support in Philadelphia, PA. The contract emphasizes compliance with various federal requirements, including item unique identification and valuation, higher-level quality standards, and adherence to the Wide Area Workflow payment process. It incorporates multiple certifications and certifications, including Buy American and Free Trade Agreements, and mandates compliance with equal opportunity and workers with disabilities policies. The contract also specifies a warranty period of one year after delivery, with defect reporting required within 45 days of discovery. The solicitation was posted on December 3, 2024, with a response deadline of January 2, 2025. It is open to organizations classified under NAICS code 332119, indicating a focus on small manufacturing firms. The contract emphasizes transparency and accountability through requirements for annual certifications, royalty disclosures, and restrictions on pass-through charges. The primary point of contact for inquiries is Taylor M. Weidman, reachable via email. Additional details and the opportunity to view the contract are available through the provided online link.
Navsup Weapon Systems Support

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332119
New
Federal
RING,EXTERNALLY THR
Solicitation # N0010426QNC94
This contract, issued under solicitation number N0010426QNC94 by NAVSUP Weapon Systems Support Mechanicsburg, pertains to the procurement of an externally threaded ring for use in a critical shipboard system, classified as SPECIAL EMPHASIS Level I material due to the severe consequences of failure, including loss of life, ship damage, or system failure. The contract imposes stringent quality, traceability, and certification requirements, mandating full compliance with specified materials such as UNS Alloy C90300 per ASTM-B505, and adherence to military and industry standards including MIL-STD-792, ISO-9001, ISO-10012, ISO/IEC 17025, and S9074 series welding and brazing procedures. All materials must be traceable from raw stock through fabrication to final assembly via unique heat-lot or traceability markings permanently applied in accordance with MIL-STD-792, with electronic certifications required and validated through complete documentation and verified by government inspection at source. The contractor must maintain a qualified quality system compliant with ISO-9001 and implement rigorous inspection and testing protocols, including 100% verification of chemical and mechanical properties, weld certification, and non-destructive testing results, with electronic signatures accepted as equivalent to handwritten endorsements under strict controls. All certifications, test reports, and compliance documents must be submitted via Wide Area WorkFlow (WAWF) to Portsmouth Naval Shipyard prior to shipment, with designated ship-to, inspect-by, and accept-by codes and electronic notifications required. Welding and repair processes are heavily regulated, requiring pre-approval of procedures and qualifications, with no repair welding permitted on UNS Alloy C90300. The contract mandates strict configuration control, prohibits unauthorized modifications, and enforces a zero-defect acceptance standard for critical components, requiring full documentation of all deviations, waivers, and engineering change proposals. Additionally, the procurement is DX-rated under the Defense Priorities and Allocations System, subject to Buy American provisions, and requires full compliance with small business and security protocols, with all materials prohibited from containing mercury or unauthorized markings, and shipping strictly forbidden until formal government acceptance is received.
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332119
New
DIBBS
Precision Sleeve Bushing Manufacturing
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332119
New
DIBBS
Fastener Tape Supply
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332119
New
DIBBS
Hand-Operated Arbor Press Supply
SAN DIEGO

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 332119
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-13QJ
The contract involves the production lot testing of 15 units identified by NSN 0001S00000062 under Solicitation SPE4A6-26-T-13QJ, with a delivery requirement of 358 days after contract award. The contractor must conduct and document comprehensive production lot testing in accordance with the technical data package, and submit a labeled Production Lot Test Report that includes the contract and lot/item numbers. This report, along with all supporting documentation such as DD Form 1222 and DD Form 250/iRAPT signed by the Quality Assurance Representative, a copy of the contract or order, actual test results and tolerances, material and process certifications, operation and inspection method sheets, and clearly marked manufacturing drawings with restricted disclosure labels, must accompany each shipment. The work is governed by the U.S. Department of Defense, specifically the ASC Commodities Division, with performance located in New Cumberland, Pennsylvania, and all submissions must be coordinated with the designated point of contact, Latoya Anderson.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332119
New
DIBBS
PRESS, ARBOR, HAND OPERA
Solicitation # SPE8E5-26-T-3777
The contract is for one hand-operated press and arbor unit, identified by NSN 3444-00-262-4242, with a purchase request number 7017757316 and contract number SPE8E5-26-T-3777. Delivery is required within 167 days from the contract award date, with the original required delivery date set for August 1, 2027, and a need ship date of February 1, 2027. The item is to be delivered FOB origin with no quantity variance allowed, inspected and accepted at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, mandating compliance with MIL-STD-129 for marking and labeling. Palletization must follow DLA packaging requirements, and the unit of issue is each (EA). Technical and quality requirements referenced by R and I numbers are defined in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on solicitation or award date depending on acquisition size. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified, and attributes must be verified at specified levels corresponding to AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Covered defense information applies, and associated technical data packages are referenced with revision numbers and CDRL-SHIPMANUL. All deliverables must meet the DLA Technical Data Management Transformation requirements, and the shipping destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581.
SAN DIEGO

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 332119
New
DIBBS
DIAL, CONTROL
Solicitation # SPE7L3-26-T-148J
This contract, issued under solicitation SPE7L3-26-T-148J by the Department of Defense’s Land Supplier Operations Vehicle Support, requires the delivery of one unit of a DIAL, CONTROL with NSN 5355-01-686-6662, to be furnished in accordance with strict technical and packaging standards. The item must be delivered within ten days to Camp Lejeune, North Carolina, FOB origin, with no variance permitted in quantity, and subjected to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, container codes, and palletization governed by DLA’s procurement packaging requirements. All materials must adhere to environmental prohibitions, including the complete exclusion of Class I ozone-depleting chemicals and intentional use of mercury or mercury compounds, except for specified functional exceptions such as batteries, fluorescent lights, and certain instruments as approved by NAVSEA, which must also include secondary containment and shockproofing. The contract incorporates referenced technical and quality requirements from the DLA Master List, with revisions controlled based on acquisition type and solicitation amendments. Special shipping instructions prohibit parcel post and mandate traceable freight delivery via a designated military freight address, with marking and documentation strictly aligned to government protocols. The contract includes detailed logistics data, including a unique government tracking identifier, project code, and official point of contact for procurement inquiries.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 332119
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-617K
This contract pertains to the procurement of five shims identified by NSN 5365-01-662-3195 under solicitation SPE4A7-26-T-617K, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The delivery must be completed within five days of award, with the place of performance located in Portsmouth, 03801-5000. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. The item contains technical data subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including foreign national employees and overseas subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and been formally approved by DLA. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and primary contact is Christian Roberson at christian.roberson@dla.mil or 8042792451.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332119
New
DIBBS
INSERT, CONTAINER
Solicitation # SPE8ED-26-T-1226
The contract pertains to the procurement of an INSERT, CONTAINER with NSN 8115-01-371-4882, specified under solicitation SPE8ED-26-T-1226, with a requirement for 38 units delivered FOB origin within 167 days of award, originally due by November 29, 2026. The item is identified by part numbers P01305 from GENERAL ATOMICS AERONAUTICAL SYSTEMS INC and PRC 102438 from PRC COMPOSITES, LLC, both subject to DLA’s Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must adhere to RP001: DLA Packaging Requirements for Procurement. The unit of issue is each (EA) at a unit price of $38.00, totaling $1,444.00, with zero variance permitted on quantity. Inspection and acceptance occur at destination, and government identification must be removed from non-accepted supplies. Delivery is directed to DLA Distribution San Joaquin in Tracy, CA, and transportation logistics follow DLAD Proc Note C19 and C20. The contract includes provisions for Covered Defense Information and mandates adherence to DLA’s authorized units of issue as defined in their official documentation. The solicitation was posted August 5, 2026, with responses due August 17, 2026, and the required ship date is February 1, 2027.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A7-26-T-626E
The contract is for two bushings, sleeves with NSN 5365-01-649-9262, under solicitation SPE4A7-26-T-626E, with a response deadline of August 13, 2026, and a delivery requirement of 142 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on acquisition size. The item is subject to covered defense information and requires compliance with Cybersecurity Maturity Model Certification Level 2 via a certified third-party assessment organization. Packaging must conform to DLA standards, and non-accepted supplies must have government identification removed. The item must be physically marked as a bare item per requirement RQ017. Technical data associated with this item is controlled under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Access to this controlled data is restricted exclusively to DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export-controlled data training, and approved questionnaire submissions. The place of performance is New Cumberland, PA, with Georgina Vass as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 days ago

DEADLINE

in 6 days
View Details
NAICS: 332119
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-13QF
The contract involves production lot testing for 20 units identified by NSN 0001S00000062 under solicitation SPE4A6-26-T-13QF, with a delivery requirement of 331 days after award. The contractor must conduct and submit a Production Lot Test Report, clearly labeled with the contract and lot numbers, and present it to the Quality Assurance Representative for review. Each shipment of test reports must be accompanied by signed DD Form 1222 and DD Form 250 or iRAPT receiving documents, a copy of the contract or order, all applicable test reports detailing actual results and tolerances from the technical data package, material and process certifications, process operation and inspection method sheets, and the manufacturing drawings used for the test samples, marked appropriately to limit public disclosure and restrict government use beyond authorized purposes. The work is governed by the Department of Defense through the ASC Commodities Division, with performance taking place in New Cumberland, Pennsylvania, and the primary point of contact is Latoya Anderson, reachable via email and phone provided. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, under NAICS code 332119 for other fabricated metal product manufacturing.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity for Covered Defense Information (CDI)
Computer Systems Design Services

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 561910
New
DIBBS
Defense Packaging & Labeling Services
Packaging and Labeling Services

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling
Other Scientific and Technical Consulting Services

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 326199
New
DIBBS
Protective Plastic Tape Supply (Manufacturing/Supply)
All Other Plastics Product Manufacturing

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
Small Business Subcontracting & Compliance ReportingThis contract requires administrative support for small business subcontracting compliance, ensuring adherence to Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement requirements. Key duties include managing certifications, preparing and submitting required reports, and maintaining accurate systems to document subcontracting activities. The work is centered on verifying compliance with small business program goals and facilitating proper reporting structures to uphold federal procurement integrity. The contract is associated with the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance taking place in New Cumberland, Pennsylvania, ZIP code 17070-5002. It falls under NAICS code 541611, indicating a focus on management consulting services. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is categorized as a subcontract procurement with no specific set-aside designation. All tasks must be executed in alignment with applicable federal guidelines to support defense contracting compliance obligations.
Administrative Management and General Management Consulting Services

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 483111
New
DIBBS
Domestic and International Shipping LogisticsThe contract requires the execution of domestic and international shipping services for filament, with strict adherence to U.S.-flag vessel regulations for all ocean transport segments. Compliance with these requirements is mandatory, ensuring that maritime operations meet U.S. statutory and regulatory standards. Additionally, the contractor must implement EDI-based tracking systems to provide real-time visibility and accurate reporting throughout the supply chain, from origin to final delivery. All activities must support the operational needs of the Department of Defense, specifically the DDSP NEW CUMBERLAND FACILITY, located in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The work falls under NAICS code 483111, which classifies it as water transportation of cargo. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with the contract structured as a subcontract under the broader defense logistics framework.
Deep Sea Freight Transportation

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Technical Data and Quality Compliance SupportThe contract requires technical documentation, quality assurance, and configuration management services to ensure filament products comply with military specifications and adhere to strict change control protocols. The work is centered on maintaining rigorous standards for material consistency, documentation integrity, and process compliance throughout the product lifecycle. All deliverables must support defense procurement requirements by aligning with established military and federal guidelines for technical data and quality systems. This subcontract is issued under NAICS code 541330 and is associated with the Department of Defense through the DDSP New Cumberland Facility. Performance is required at the New Cumberland location with ZIP code 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. Although no set-aside designation or point of contact details are provided, bidders must be prepared to demonstrate expertise in defense-grade technical support, quality systems, and configuration control for critical material applications.
Engineering Services

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 326199
New
DIBBS
Additive Manufacturing Filament SupplyThe contract seeks the supply of additive manufacturing filament specifically for defense-related applications, requiring strict adherence to DLA packaging standards and technical data specifications. The material must meet operational and quality benchmarks necessary for military use, with performance tied to the New Cumberland facility in Pennsylvania, zip code 17070-5002. Submission deadlines are set for August 17, 2026, following a solicitation posted on August 5, 2026, under the NAICS code 326199 for other plastic product manufacturing. This is structured as a subcontract, with no set-aside designation, and is managed through the Department of Defense’s DDSP New Cumberland Facility. All proposals must align with defense-grade compliance protocols and be submitted via the designated DIBBS platform.
All Other Plastics Product Manufacturing

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Transportation Logistics
Specialized Freight (except Used Goods) Trucking, Local

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Safety Documentation
Other Scientific and Technical Consulting Services

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 332439
New
DIBBS
Precision Metal Cutting and Rod Supply
Other Metal Container Manufacturing

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 493190
New
DIBBS
Specialized Packaging and Labeling ServicesThe contract requires specialized packaging, preservation, labeling, and bar-coding services for precision milling cutters in full compliance with MIL-STD-129, ASTM D3951, and RP001 standards, ensuring all items meet Department of Defense requirements for durable, traceable, and environmentally protected shipment. The work must include proper identification through standardized labeling and bar-code systems that enable seamless integration into DLA’s distribution network, with strict adherence to military and industry specifications for material preservation during transit and storage. Performance is to be executed at the New Cumberland, Pennsylvania facility with a zip code of 17070-5002, and the task is structured as a subcontract under NAICS code 493190. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with the agency issuing the requirement being the Department of Defense through the DDSP New Cumberland Facility. All submissions must satisfy technical and procedural criteria mandated for federal defense logistics operations.
Other Warehousing and Storage

POSTED

3 days ago

DEADLINE

in 9 days
View Details