Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on August 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

BATTERY, NONRECHARGEABL

Closed
SPE7L7-26-T-5020Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

This fixed-price solicitation, issued by DLA Land and Maritime, is for the procurement of 167 nonrechargeable lithium thionyl chloride high-temperature sealed batteries, identified by NSN 6135-01-357-0621. The items are designated as critical application items and are restricted source items requiring engineering source approval from the government design control activity. The batteries must have a non-extendable shelf life of 60 months and comply with specific hazardous material transportation regulations for land, sea, and air, including ICAO and IMDG standards. Delivery is required by June 5, 2027, with inspection and acceptance occurring at the destination in Tracy, California. The contract mandates strict quality and packaging standards, requiring compliance with MIL-STD-129 for marking and RP001 for palletization. Sampling must follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Contractors must utilize the Wide Area WorkFlow system for electronic invoicing and receiving reports. Additionally, the award is subject to domestic sourcing restrictions, including the Buy American Act and the Berry Amendment, and requires adherence to cybersecurity standards under DFARS 252.204-7012.

General Info

Procurement of 167 critical lithium batteries from approved sources within 269 days.

NAICS

335910 - Battery Manufacturing

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUSA
Office AddressUSA

Full Description

Show more
BATTERY,NONRECHARGEABLE
BATTERY, NONRECHARGEABLE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SUPPLEMENTARY QUALITY ASSURANCE PROVISIONS
(SQAP) OR QUALITY ASSURANCE PROVISIONS (QAP)
LITHIUM THIONYL CHLORIDE,HIGH TEMPERATURE,SEALED
SHELF LIFE: TYPE 1, 60 MONTHS
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
SPE7L7-26-T-5020
SECTION B
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
NOTE: THIS IS A RESTRICTED SOURCE ITEM AND
REQUIRES ENGINEERING SOURCE APPROVAL BY THE
GOVERNMENT DESIGN CONTROL ACTIVITY.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
CRITICAL APPLICATION ITEM
LOCKHEED MARTIN CORPORATION 81755 P/N 16VE584027-1 BREN-TRONICS DEFENSE LLC 51828 P/N BT70242-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018068244 0001 EA 167.000
NSN/MATERIAL:6135013570621
DELIVERY (IN DAYS):0269
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:D3 OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE7L7-26-T-5020
SECTION B
PR: 7018068244 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
The transportation of Lithium-ion (and any other rechargeable lithium chemistries) packs with up to 8 grams of equivalent lithium content, as described in this document, is not regulated by the U.S. Department of Transportation or the major international regulatory bodies. Equivalent lithium content for lithium ion and lithium polymer cells and batteries in grams on a per cell basis is calculated as 0.3 times the rated capacity in ampere-hours. The equivalent lithium content for a battery or battery pack is the rated capacity in ampere-hours for a single cell multiplied by 0.3 and then multiplied by the number of cells in the battery.
Transportation:
Land Transport (ADR/RID) # The product fulfills the requirements of Special Provision 188 of ADR/RID and is therefore, keeping within the prescribed quantity limits, excepted from the application of the Dangerous Goods regulations. Sea Transport (IMDG) The product fulfills the requirements of Special Provision 188 of IMDG-Code and is therefore, keeping within the prescribed quantity limits, excepted from the application of the Dangerous Goods regulations. Air Transport (IATA) The product fulfills the requirements of Special Provision A45 of IATA-DGR and is therefore, keeping within the prescribed quantity limits, excepted from the application of the Dangerous Goods regulations. "Per U.S. DOT:
If battery meets non-spillable criteria listed in 49 CFR § 173.159(f) and 173.159a(d)(1). Non-spillable batteries are excepted from 49 CFR Subchapter C requirements, provided that the following criteria are met:
1. The batteries must be securely packed in strong outer packaging and meet the requirements of 49 CFR § 173.159a.
2. The batteries' terminals must be protected against short circuit.
3. Each battery and their outer packaging must be plainly and durably marked ""NON-SPILLABLE"" or ""NON-SPILLABLE BATTERY"". The exception from 49 CFR, Subchapter C means shipping papers need not show proper shipping name, hazard class, UN number, and packing group and hazardous labels are not required when transporting a non-spillable battery."
IN ADDITION TO THE PACKAGING REQUIREMENTS INCLUDED IN THE COMMODITY SPECIFICATION LISTED BELOW, THE SUPPLIES SHALL COMPLY WITH APPLICABLE PACKAGING REQUIREMENTS OF THE LATEST EDITION OF THE INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO) TECHNICAL NSN/Part Number: 6135-01-357-0621 Quantity: 167 EA Purchase Request: 7018068244QTY: 167 Delivery: 269 days ADO

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

NAICS: 333415
New
DIBBS
CONDENSER, REFRIGERATIO
Solicitation # SPE8E8-27-T-0311
Solicitation SPE8E8-27-T-0311 is a small business set-aside, fixed-price contract issued by DLA Troop Support for the procurement of four refrigeration condensers, identified by NSN 4130012671774 and Carrier Corp part number 50BW400034. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with a delivery window of 167 days after order. The original required delivery date is December 31, 2026, with a need ship date of April 26, 2027. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, specifically requiring the substitution of MIL-STD-129K for MIL-L-61002. Environmental guidelines emphasize avoiding plastics for wrapping and dunnage. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. All quotes must be submitted via the DIBBS system, and the award may be processed as an automated award. Compliance with DFARS cybersecurity standards, including safeguarding covered defense information and reporting cyber incidents, is required.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 3 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SOLENOID
Solicitation # SPE7MC-27-T-1252
Solicitation SPE7MC-27-T-1252 is a request for quotations for the procurement of two solenoid valves, identified by NSN 4810-01-729-2551 and Magnatrol Valve Corp part number ER15-48G32X4-DSLT-6BA2A. These critical application items are designed for use with water and must adhere to specific absolute temperature requirements. The contract is issued by the DLA Distribution San Joaquin and is designated as a HUBZone set-aside under NAICS code 332911. Delivery is required by June 2, 2027, with a delivery window of 204 days after order. The items are to be delivered FOB Origin to the receiving warehouse in Tracy, California, with both inspection and acceptance occurring at the destination. The procurement is subject to rigorous technical and quality standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. It specifically prohibits the use of Class I ozone-depleting chemicals and requires compliance with the Buy American Act and the Berry Amendment. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates a comprehensive set of FAR and DFARS clauses covering cybersecurity reporting, safeguarding of covered defense information, and the prohibition of certain telecommunications equipment. Offerors are encouraged to provide quantity ranges in their quotes and must certify their socioeconomic status and compliance with domestic material restrictions.
Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 3 days
View Details
NAICS: 333413
New
DIBBS
FAN, VANEAXIAL
Solicitation # SPE8E7-27-T-0331
Solicitation SPE8E7-27-T-0331 is a request for quotation issued by DLA Troop Support, Construction and Equipment for the procurement of one vaneaxial fan, identified by NSN 4140-01-671-7360. The requirement is designated as a total small business set-aside under FAR 19.5, with a need ship date of April 26, 2027, and an original required delivery date of July 30, 2027. Delivery is established as FOB Destination, with the item to be shipped to DLA Distribution San Joaquin in Tracy, California. The delivery lead time is specified as 167 days after order. The contract mandates strict adherence to technical and quality standards, incorporating the DLA Master List of Technical and Quality Requirements, specifically RC001 for source approval documentation, RP001 for packaging, and RQ011 for the removal of government identification from non-accepted supplies. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. Inspection and acceptance will occur at the destination per FAR 52.246-1. Additionally, the provider must comply with the Buy American Act, the Berry Amendment, and various DFARS cybersecurity and reporting requirements, including safeguarding covered defense information. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 3 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS