Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BATTERY, STORAGE

Active
SPE7L7-26-T-4397Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of eight Lead Acid, Wet Charged, Spillable Battery Storage units under solicitation SPE7L7-26-T-4397, with a required delivery within five days of award to a designated destination in Charlotte, North Carolina. The item, identified by NSN 6140-01-195-6189, is classified as a Critical Application Item with a Type I shelf life of six months, non-extendable, and must be marked accordingly. Strict compliance is mandated with DLA packaging requirements, MIL-STD-2073-1E for preparation, MIL-STD-129 for marking, and RP001 for palletization. The batteries must not contain intentionally added mercury or mercury compounds except as functionally required, and any portable devices containing mercury must include a secondary containment per NAVSEA 5100-003D. Sampling and inspection are governed by MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances accepted unless otherwise specified, and critical attributes must meet verification level VII or an AQL of 0.1. The item must be shipped via traceable freight methods, not parcel post, and delivered FOB destination with no quantity variance allowed. Inspection and acceptance occur at the delivery point, and all documentation, unit of issue, and packaging must align with DLA and DoD standards.

General Info

Eight lead acid batteries delivered in five days to Charlotte, NC, per DoD packaging and inspection standards.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

335910 - Battery ManufacturingView NAICS

Place of Performance

4930 MINUTEMAN WAY BLDG 63, CHARLOTTE, NC, 28208-3866, US

Set-Aside

NONE

Documents

(1)

SPE7L7-26-T-4397.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts
MOLLY TEEGARDEN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BATTERY,STORAGE
BATTERY, STORAGE LEAD ACID, WET CHARGED, SPILLABLE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SHELF LIFE TYPE 1, 6 MONTHS
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RS008: Shelf-life requirement RS001 for a TYPE I (CODE F) item with a shelf life of 6 months (non-extendable) applies to this item.
CRITICAL APPLICATION ITEM
SPE7L7-26-T-4397
SECTION B
TDP Rev A Gen 1 IAW BASIC DRAWING NR 94598 RE-011956189 REVISION NR DTD 05/01/2026 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017492981 0001 EA 8.000
NSN/MATERIAL:6140011956189
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
FB6331
FB6331 145 AW LGRDC
CP 704 391 4163
4930 MINUTEMAN WAY BLDG 63
CHARLOTTE NC 28208-3866
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB6331
SPE7L7-26-T-4397
SECTION B
PR: 7017492981 PRLI: 0001 CONT’D
FB6331 145 AW LGRDC
CP 704 391 4163
4930 MINUTEMAN WAY BLDG 63
CHARLOTTE NC 28208
US
M/F: (TCN) FB63316191B058
RDD: N1G
PROJ: 196 TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 01 ADV: FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/15/2026
SPE7L7-26-T-4397 NSN/Part Number: 6140-01-195-6189 Quantity: 8 EA Purchase Request: 7017492981QTY: 8 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335910
New
DIBBS
BATTERY, STORAGEThis contract specifies the procurement of six calcium maintenance-free shelf-life Type I batteries with a non-extendable 12-month shelf life, supplied by East Penn Manufacturing Co. under part number 11U1L and NSN 6140017178541. The batteries must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including MIL-STD-129 marking and palletization standards. Sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are assigned verification levels or AQLs as defined. Mercury or mercury-containing compounds are strictly prohibited except in functional applications like batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents. The items will be delivered FOB destination within 20 days of contract award to Camp Pendleton, California, with no quantity variance allowed and inspection and acceptance also occurring at destination. Shipment must use traceable freight methods, not parcel post, and special marking codes are not required. The contract is issued under solicitation SPE7L7-26-T-4391 with a required delivery date of July 13, 2026, and response deadline August 3, 2026, under NAICS code 335910 and managed by the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGEThis contract pertains to the procurement of nickel cadmium battery storage units designated by NSN 6140-00-578-4935 and part number 22378-001, supplied by MARATHONNORCO AEROSPACE, INC. The total quantity required is 14 units, divided into two line items of five and nine units respectively, to be delivered within 60 days of award. The pricing structure is firm fixed price with zero variance allowance, and both inspection and acceptance occur at the destination. The batteries are classified as a critical application item with a non-extendable shelf life of 36 months, designated as Type I, requiring special marking per code 32. Strict packaging and marking standards under MIL-STD-2073-1E and MIL-STD-129 must be followed, including palletization per DLA’s RP001 requirements, with hazardous material handling governed by IP025. Sampling for quality control shall adhere to MIL-STD-1916 or ASQ H1331 Table 1 using zero-conformance acceptance criteria unless otherwise specified, with attributes assigned verification levels or AQLs as defined. Mercury and mercury compounds are prohibited except in designated functional uses such as batteries, with additional containment and shock-proof requirements for portable devices. All technical and quality requirements referenced are governed by the DLA Master List, with the applicable revision determined by acquisition size and solicitation timeline. Delivery is directed to DLA San Joaquin in Tracy, CA, with transportation details outlined in DLAD procedural notes.
DLA DIST SAN JOAQUIN

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGEThe contract specifies the procurement of 6140-01-457-4206, a 12-volt wet-charged lead acid battery classified as corrosive by the Department of Transportation and shipped under the name "Battery, Wet, Filled with Acid." It is a Type I shelf-life item with a strict non-extendable 3-month shelf life, requiring packaging and marking in compliance with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 for shelf-life designation. All shipments must adhere to DLA packaging requirements RP001 and hazardous materials packaging standard IP025, using only U.S. Department of Transportation-compliant 4G UN-certified fiberboard containers; commercial packaging is strictly prohibited. The contractor must ensure staff are trained and certified per Title 49 CFR for handling, marking, labeling, and documenting hazardous materials, and must include valid Safety Data Sheets confirming regulatory compliance. The product must not contain intentionally added mercury except for functional uses in batteries, and portable fluorescent lamps or instruments containing mercury must have shockproof design and secondary containment per NAVSEA standards. The contract mandates a Firm Fixed Price structure with zero tolerance for quantity variance, delivery within 60 days after award, and inspection and acceptance occurring at the destination. Three separate deliveries of two batteries each are required, shipped to distinct U.S. military addresses in Pennsylvania and Puerto Rico, with shipments traceable and never via parcel post. Each delivery has an associated RDD and project code with unique routing identifiers, and the batteries are sourced from East Penn Manufacturing Co. under part number 7T31. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise specified, and verification levels for attributes are fixed as VII, IV, and II for critical, major, and minor characteristics respectively. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the contract explicitly excludes any non-compliant materials or packaging, enforcing full adherence to federal hazardous materials regulations and government-specific logistics protocols.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGEThis contract is for the procurement of 22 sealed lead acid gel cell batteries with a part number 6140-01-370-8677 and NSN 6140013708677, supplied by East Penn Manufacturing Co. under purchase request 7017493439. The unit of issue is each (EA), with a fixed quantity of 22 units and no tolerance for variance in delivery. The batteries have a non-extendable Type I shelf life of 12 months and must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods and marking per MIL-STD-129 with the special marking code ZZ indicating non-spillable requirements. Delivery is FOB destination within 20 days, with inspection and acceptance occurring at the delivery point. The solicitation is a total small business set-aside under NAICS code 335910, issued by the Defense Logistics Agency under contract number SPE7L7-26-T-4382, with responses due by August 3, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling to follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, requiring zero non-conformances unless otherwise specified. All hazardous materials must be accompanied by Safety Data Sheets formatted per OSHA’s Hazard Communication Standard (29 C.F.R. 1910.1200), including compliant labeling under the Globally Harmonized System. Mercury or mercury-containing compounds are prohibited unless explicitly permitted for functional use in batteries, instruments, or weapon systems, and any portable devices containing mercury must be shockproof with secondary containment as specified by NAVSEA 5100-003D. Supplier employees must be trained on SDS and labeling requirements, and all packaging must meet DLA’s procurement guidelines including palletization and special marking protocols.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335910
New
DIBBS
BATTERY ASSEMBLY
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335910
New
DIBBS
RECHARGABLE BATTERYThe contract solicitation SPE2DH-26-T-5181 seeks 700 units of a rechargeable battery designated by NSN 6140-01-500-9672 for use with C420 motor blowers in medical acquisition settings. Each battery operates at 4.8 volts with a nominal capacity of 4000 mAh at 0.24 amp discharge and 70 degrees Fahrenheit, providing an estimated runtime of 3.5 hours in the intended device. Deliveries are required to be shipped to Tracy, California, with a need ship date of January 23, 2027, and must meet FOB destination terms. Packaging must adhere to commercial standards and be sealed in containers that safeguard against damage, with exterior shipping containers suitable for safe transport via common carrier at the lowest cost, including export packaging when needed. All units must be marked according to the Medical Marking Standard No. 1 (MMS NO. 1), which supersedes MIL-STD-129 for medical acquisitions; each container must include the NSN, item name, lot control number, and date of manufacture with compliant barcoding. The item is not regulated by the FDA, but if classified as hazardous, it must be accompanied by current Safety Data Sheets (SDS) compliant with 29 CFR 1910.1200, including annotations of the NSN and item name on the first page, and labeled in accordance with OSHA’s Globally Harmonized System. Suppliers must submit SDS and hazard labeling for review and approval prior to award, along with employee training on these requirements. Preservation methods must follow PRES MTHD:10 CLNG/DRY:1, and packaging must comply with MIL-STD-2073-1E and DLA’s RP001 packaging requirements. The contract is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, and compliance with numerous FAR and DFARS clauses is mandatory, including those covering employment eligibility, combating human trafficking, sustainable products, cybersecurity safeguards for covered defense information, prohibition of hexavalent chromium, and electronic submission of payment requests via WAWF. The solicitation requires the offeror to specify the source and part number being supplied and includes extensive clauses related to government property, whistleblower rights, electronic reporting, and the handling of hazardous materials, with strict prohibitions on unauthorized disclosure or use of government information. No pricing
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGEThe contract specifies the procurement of lead acid wet charged storage batteries, part number 524MF manufactured by East Penn Manufacturing Co. with CAGE code 04055, identified by NSN 6140-01-457-2602. Four units are required, each delivered under firm fixed price terms with zero variance permitted in quantity. Delivery is due within 60 days after award date, with inspection and acceptance occurring at the destination. The batteries are classified as D.O.T. Class Corrosive with shipping name “Battery, Wet, Filled with Acid” and must comply with strict packaging standards per MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 indicating Type I shelf life. Shelf life is Type I with a fixed six-month duration that is non-extendable, and the items are subject to hazardous materials handling requirements under IP025. Mercury and mercury-containing compounds are prohibited except in specific functional applications such as batteries, and portable devices containing mercury must include a secondary containment system as mandated by NAVSEA 5100-003D. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated. Packaging and palletization must adhere to DLA’s RP001 requirements. The batteries are to be shipped via traceable means only, excluding parcel post, to four distinct destinations: Yuma Proving Ground in Arizona, Fort McCoy in Wisconsin, and two additional Yuma addresses. Each shipment is assigned a unique transaction control number and a requested delivery date ranging from February to June 2026. All items must be furnished in compliance with the DLA Master List of Technical and Quality Requirements, referenced under RA001, with applicable revisions controlling based on solicitation or award date. Government-use-only identifiers and internal tracking codes are provided for logistics and accountability. The contract is managed by the Defense Logistics Agency, with Michael Francis as the point of contact, and was issued under solicitation SPE7L7-26-Q-2050, with a response deadline of July 30, 2026.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGEThis contract is for the procurement of seven storage batteries with part number NPX-35T and NSN 6140-01-588-5585, supplied by ENERSYS ENERGY PRODUCTS INC. The item is classified as a Type I shelf-life item with a fixed 12-month lifespan that is non-extendable, and all packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 to denote the shelf-life type. The batteries must be packaged and shipped in accordance with DLA packaging requirements and hazardous materials standards, with strict prohibitions against intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally necessary in batteries, sensors, or weapon systems as specified by NAVSEA, and portable fluorescent lamps must include a secondary containment. Sampling for quality verification must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Delivery is FOB destination within 20 days of contract award, with no tolerance for variance in quantity, and inspection and acceptance occur at the destination. The delivery address is the 9th Communication Battalion at Camp Pendleton, California, and shipments must be sent via the fastest traceable method, excluding parcel post. The contract incorporates technical and quality requirements referenced in the DLA Master List, and all provisions, including hazardous material handling and packaging, must be fully adhered to. The original required delivery date is July 13, 2026, and the contract was issued under solicitation SPE7L7-26-T-4387.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGEThe contract specifies the procurement of sealed, non-spillable lead-acid gel cell batteries under NSN 6140-00-432-0490, with a total quantity of 20 units delivered in eight separate lots ranging from one to four units each. All deliveries are subject to firm fixed pricing with zero variance allowed in quantity, and must be shipped to designated military locations across the United States within 60 days of award. Inspection and acceptance occur at the destination, with FOB terms indicating delivery responsibility ends at the final point of receipt. The batteries must comply with MIL-STD-2073-1E packaging standards, including preservation methods, marking per MIL-STD-129, and special labeling indicating Type I status with a non-extendable shelf life of 15 months. Palletization must follow DLA packaging requirements, and the use of mercury or mercury compounds in preservation, packaging, or the product itself is strictly prohibited except where specifically exempted. Sampling for quality verification must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and all attributes are assigned strict verification levels. Suppliers must submit Safety Data Sheets and HCS-compliant labels per OSHA 29 C.F.R. 1910.1200 and train employees accordingly. Shipments must be sent via traceable freight methods; parcel post is prohibited. Contract documentation references the DLA Master List of Technical and Quality Requirements, and includes specific engineering change, variance, and government identification removal protocols.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, GEL CELL
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGEThis contract covers the procurement of sealed lead acid storage batteries with NSN 6140-01-482-9031, designated as a commercial off-the-shelf item with a Type I shelf life of 12 months that is non-extendable. The batteries must comply with MIL-STD-130N for identification marking and be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129, including special labeling to indicate the Type I shelf life code. All units are subject to strict packaging and palletization requirements defined by DLA, and hazardous material provisions mandate submission of complete Safety Data Sheets in compliance with FED-STD-313 and OSHA 29 CFR 1910.1200 if applicable, with mercury or mercury compounds strictly prohibited except for specific functional uses in batteries, sensors, or instruments as permitted under NAVSEA guidelines. Quality assurance requires sampling per MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise specified, and attributes must be verified at designated levels. The contract specifies six delivery quantities totaling 12 units, each shipped to distinct government locations including bases in the Philippines, Korea, Germany, Alaska, Hawaii, and other U.S. installations, with all deliveries required within 60 days after award. Inspection and acceptance occur at destination, with no variance permitted in quantity, and the entire procurement is governed by the DLA Master List of Technical and Quality Requirements referenced in the contract.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 325412
New
DIBBS
Packaging and Labeling ComplianceAll packaging and accompanying documents must be clearly labeled with contract identification numbers from Blocks 1 and 2 to comply with Department of Defense traceability and receipt standards. This subcontract, issued by the Defense Logistics Agency under the NAICS code 325412, ensures end-to-end accountability through precise labeling practices, critical for operational readiness and logistical accuracy. The requirement applies to all delivered items and their documentation, regardless of location, and is tied to the contract reference SPE2DX25D9900 with delivery identifier SPE2DP26F6915. The obligation is non-negotiable and fundamental to successful acceptance by DOD receiving activities.
Pharmaceutical Preparation Manufacturing

POSTED

about 17 hours ago

DEADLINE

N/A
View Details
NAICS: 488999
New
DIBBS
International Logistics and Delivery CoordinationThe contract governs the end-to-end international transportation and logistics operations required to deliver pharmaceutical products from the supplier to Kunsan Air Base in South Korea, ensuring full compliance with FOB DESTINATION terms. This includes managing customs clearance at all international checkpoints, coordinating multimodal transit, and guaranteeing the integrity, security, and timeliness of temperature-sensitive medical shipments throughout the supply chain. The work is performed under a subcontract arrangement with the Defense Logistics Agency, a component of the Department of Defense, and is classified under the NAICS code 488999 for other support activities for transportation. All logistics activities must adhere to strict regulatory and security protocols required for military medical supply chains, ensuring that pharmaceuticals arrive in perfect condition and on schedule. The contract is tied to the specific award identifier SPE2DP26F6915 and is publicly accessible through the DIBBS system for procurement transparency. The delivery location is fixed at Kunsan Air Base, and no deviations from the established compliance framework are permitted, with all parties expected to meet federal defense logistics standards for international pharmaceutical handling and documentation.
All Other Support Activities for Transportation

POSTED

about 17 hours ago

DEADLINE

N/A
View Details
NAICS: 424210
New
DIBBS
Pharmaceutical Product Supply – Omeprazole Extended-Release CapsulesThe contract involves the supply and delivery of 2,000 bottles of Omeprazole Extended-Release Capsules, identified by NSN 6505016247068, to Kunsan Air Base in South Korea with a delivery deadline of July 1, 2026. The product must meet all applicable FDA and Department of Defense standards, ensuring compliance with federal pharmaceutical regulations and military medical requirements. The award is structured as a subcontract under the Defense Logistics Agency, which operates under the Department of Defense, and the procurement is classified under NAICS code 424210, reflecting wholesale distribution of pharmaceuticals and medical supplies. The delivery location is specifically designated for a U.S. military installation overseas, indicating the product is intended for use by military personnel and their dependent medical care. The contract’s official record is accessible through the DIBBS system, and while the solicitation number and point of contact details are not provided, the placement of performance and agency affiliation confirm this is a Department of Defense logistics operation focused on sustaining medical readiness.
Drugs and Druggists' Sundries Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

N/A
View Details
NAICS: 333992
New
DIBBS
CAP, AIRThis contract, issued by the Defense Logistics Agency under solicitation number SPE8E5-26-T-3638, pertains to the procurement of one unit of material identified by NSN 3433-01-158-0436, with a required delivery within five days of award. The item is to be delivered FOB origin, with no tolerance for quantity variance, and inspected and accepted at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede commercial standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including specific hazardous material handling per FED-STD-313 and TQ requirement IP025 if applicable. Mercury and mercury-containing compounds are strictly prohibited except for defined functional uses such as batteries, fluorescent lights, sensors, or reagents approved by NAVSEA, with additional containment requirements for portable devices. The shipment is to be sent to a designated SSA location in Kaiserslautern, Germany, with transportation governed by DLA procedural notes C19 and C20. The contract includes restrictions on covered defense information and mandates compliance with supplier documentation standards including Source Approval Requests and removal of government identification from non-accepted items. The original required delivery date is June 11, 2025, and the point of contact is Ira Hedgepeth at DLA.
Welding and Soldering Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
HEATER, FLUID, INDUSTThis contract is for the procurement of one fluid heater, industrial model, identified by NSN 4420014299920 and part number 5-131-08-030-002 from Fluid Handling LLC, with a total quantity of ten units to be delivered within five days of award. The item is covered under solicitation SPE8E8-26-T-4771, which is a total small business set-aside under NAICS code 332410, and is managed by the Defense Logistics Agency. Delivery is FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 requirements, and all packaging must be marked and labeled appropriately with the specified unit of issue and quantity per unit pack. The contract explicitly prohibits intentional addition of mercury or mercury-containing compounds to the hardware or its components, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and maintain a secondary containment barrier per NAVSEA 5100-003D. Shipment is directed to the U.S. Army SSA W58MKR facility in Zaczernie, Poland, and must follow DLA procedures C19 and C20 for transportation and first destination transfer. The item must be delivered by July 22, 2026, and is associated with RDD code E and project code 3BI TP 1. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. Contract data indicates the primary point of contact is Alexis Selby, with the solicitation posted on July 21, 2026, and responses due by August 3, 2026. The purchase request number 7017559823 references this line item, with unit price and total cost not itemized but implied through total quantity and contractual obligations. Government use identifiers and distribution codes are provided for internal tracking purposes.
Power Boiler and Heat Exchanger Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326199
New
DIBBS
SPECTACLES, INDUSTRIThis contract requires the delivery of 10 pairs of industrial safety spectacles under NSN 4240-01-701-2897, with a purchase request number 7017543009, to be shipped FOB destination within 20 days of award. The supplier must comply with all applicable DLA Master List of Technical and Quality Requirements, which take precedence over commercial standards like ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements RP001. If the item is hazardous per FED-STD-313, it must be packaged to SPE8E6-26-T-3776 specifications; otherwise, commercial packaging compliant with ASTM D3951 is acceptable, but still subordinate to DLA technical standards. All items must be devoid of government identification if rejected, and demilitarization procedures apply to any Category I munitions-related components, though not relevant to this product. Delivery is to USS ROSS DDG 71 at FPO AE 09586, with transportation governed by DLAD Proc Notes C19 and C20. The contract identifies the unit of issue as each, with no variance permitted in quantity, and inspection and acceptance occur at the destination. The solicitation was issued under SPE8E6-26-T-3776, with a required delivery date of July 22, 2026, and a response deadline of August 3, 2026. The contracting officer is John Lieb of the Defense Logistics Agency, and the item is classified under NAICS code 326199.
All Other Plastics Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332313
New
DIBBS
PLATE, INSTRUCTIONThe contract pertains to the procurement of two instructional plates identified by NSN 9905-01-515-8353 under solicitation SPE8E6-26-Q-0579, with a firm delivery deadline of 90 days after award. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have all government identification removed prior to return. Drawings associated with this item are accessible only during the open solicitation period via the DIBBS portal. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless otherwise directed. Compliance with zero defect acceptance is mandatory unless explicitly waived. Technical data associated with this item is subject to export control under ITAR or EAR, and its disclosure to foreign persons, including within the United States, is strictly prohibited without prior authorization. Access to controlled technical data is restricted to contractors with valid US/Canada Joint Certification Program certification, completed DOD export control training, and explicit approval from DLA. The point of contact for the solicitation is Kathleen Selover, reachable via email and phone listed in the contract data.
Plate Work Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATIONThe contract pertains to the procurement of identification markers, specifically for a Type I shelf-life item with a 12-month non-extendable shelf life, under the Defense Logistics Agency’s procurement requirements. The item must be supplied by either LABELMASTER CO. or AMERICAN LABELMARK COMPANY with the respective part numbers PL-18 or HML13, and must comply with MIL-STD-129 for labeling, including shelf-life markings in calendar quarter and year format, with the expiration date set exactly one year from the cure date. At least 85% of the item’s shelf life must remain at the time of delivery. Packaging must conform to MIL-STD-2073-1E, with clear marking specifications and avoidance of plastic materials for wrapping, cushioning, or dunnage whenever feasible. The unit of issue is RO (1,666 feet), with a total quantity of one RO required, and delivery is due within 20 days of contract award, FOB origin. Inspection and acceptance occur at destination, and no variance in quantity is permitted. The item is destined for W8002F, a military facility located in Comayagua, Honduras, and must be shipped via traceable means, with parcel post prohibited. The delivery address, mark for address, and freight shipping address are identical, and the point of contact is Jennifer Roome of the Defense Logistics Agency. The solicitation number is SPE8E6-26-T-3765, with an original required delivery date of July 17, 2026, and responses are due by August 3, 2026. Technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, and compliance with all applicable codes and standards including MIL-STD-129 is mandatory. The contract includes government use codes, project information, and a National Stock Number of 7690-01-242-4556, with the North American Industry Classification System code 323117 identifying the industry standard for the item.
Books Printing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
TANK, OIL DRAIN, COMPThe contract is for one oil drain tank, part number 366-20263 and NSN 4130-01-230-8549, under solicitation SPE8E8-26-T-4770, issued by the Defense Logistics Agency. Delivery is required within five days of award, with shipment destined for the Carrier Outfitting Material Support Center in Suffolk, Virginia. The item must be furnished FOB origin, with no variance allowed in quantity, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using approved methods and materials, with strict instructions to avoid plastics where possible. The item must not contain intentional mercury or mercury compounds except in specific permitted applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents, and any portable mercury-containing devices must be shock-proof with secondary containment per NAVSEA 5100-003D. The contract references DLA’s Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation or award date. A unique shipment identifier RDD 777 requires tracking via the fastest traceable means and prohibits parcel post. The technical data package is not approved by DLA Troop Support, and no request for it should be submitted. The contract includes specific freight and parcel post addresses, a government-only identification code, and a required delivery date of July 20, 2026, with a response deadline of August 3, 2026.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
BRACKET, LIGHT RETENThe contract pertains to the procurement of 40 units and 140 units of a light retention bracket, identified by NSN 6220-01-631-4413 and part number 2614833C1, under solicitation SPE8E7-26-T-3370. Delivery is required within five days of shipment, with FOB origin terms, and no quantity variance is permitted. Inspection and acceptance occur at the destination, with all packaging and labeling strictly governed by MIL-STD-129 and DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, while hazardous materials must comply with TQ requirement IP025 per FED-STD-313. Palletization must adhere to RP001 DLA Packaging Requirements, and each unit pack must contain exactly one item. The items are to be delivered to the U.S. Army SSA W58MKR in Zaczernie, Poland, with shipment tracked via RDD E and referenced DLA procedural notes. The first delivery is due by July 21, 2026, and the second by July 22, 2026, with unit prices of $40.00 and $140.00 respectively, totaling $2,000 and $19,600. The contract references mandatory technical and quality standards from the DLA Master List accessible online, and all documentation and unit of issue compliance must align with DoD standards as defined in official DLA resources.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
New
DIBBS
LABEL

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332313
New
DIBBS
DECONTAMINATING APPThis contract is for the procurement of one unit of a decontaminating apparatus identified by NSN 4230-01-593-2297 and part number T00416-5083, classified as a commercial item with a non-extendable shelf life of 12 months as a Type I (Code H) item. The item must comply with strict material restrictions including the absolute prohibition of asbestos per FED-STD-313 and the intentional exclusion of mercury or mercury-containing compounds, except in specified functional applications such as batteries, fluorescent lights, sensors, controls, weapon systems, and certain chemical reagents defined by NAVSEA, with portable mercury-containing devices required to have shockproof construction and a secondary containment boundary in accordance with NAVSEA 5100-003D. The item is designated as a critical application item and must be packaged in compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, including the special marking code 32 for shelf life, with palletization adhering to DLA packaging requirements. Delivery is required FOB origin within 20 days of contract award, with zero tolerance for quantity variance, inspection and acceptance occurring at the destination. The item must be delivered to the Distribution Management Office at Building 1710, Iwakuni, Japan, under contract SPE8E6-26-T-3774, with the original required delivery date set for July 17, 2026. Compliance with DLA’s Master List of Technical and Quality Requirements, including specific references such as RP001, RQ011, RD003, and RC001, is mandatory, along with adherence to all documentation and source approval protocols. Transportation is governed by DLAD procedural notes C19 and C20, and all markings, packaging, and unit of issue must conform to specified DoD and ANSI X12 standards. The contract is managed under a federal procurement system with government-only access details and is part of a larger expeditionary system requirement supported by HDT Expeditionary Systems Inc.
Plate Work Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details