Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on August 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

BATTERY, STORAGE

Closed
SPE7L7-26-Q-2218Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-27-T-0237
This fixed-price solicitation, issued by the Defense Logistics Agency (DLA) Weapons Support, is for the procurement of one sealed lead acid storage battery, identified by NSN 6140-01-482-9031. The item is classified as a commercial off-the-shelf product and a critical application item with a non-extendable shelf life of 12 months. Delivery is required within 5 days after receipt of order, with a final required delivery date of October 1, 2026. The shipment is designated as FOB Destination to the HI ARNG CSMS 1 in Kapolei, Hawaii. The contract mandates strict adherence to technical and quality requirements via the DLA Master List (RA001) and specific packaging and marking standards, including MIL-STD-129 and MIL-STD-130N. Because the item is a battery, the offeror must provide a complete Safety Data Sheet (SDS) and OSHA hazard communication labels in accordance with FED-STD-313 and 29 CFR 1910.1200. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and the intentional addition of mercury, except where functionally required for batteries. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. The procurement incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information (DFARS 252.204-7012), and basic safeguarding of contractor information systems. Inspection and acceptance will occur at the destination. The solicitation is open to various small business set-asides, including 8(a), HUBZone, and service-disabled veteran-owned businesses, with a specific size standard of 500 employees for non-manufacturing concerns.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 2 days

AI Contract Overview

Show more

This contract is a solicitation from the Defense Logistics Agency for the procurement of storage batteries, identified by NSN 6140-01-203-4912. The requirement consists of five line items totaling 24 units, all under firm-fixed-price terms with a delivery window of 60 days after receipt of order. The items are designated as critical application items and must adhere to specific technical data packages and standards, including SAE-J537-2016 and MIL-STD-129R. Key requirements include a Type I shelf life of 60 months and strict adherence to hazardous materials packaging, marking, and shipping regulations per IP025. The contract specifies that the batteries weigh 65 lbs dry and require an upgraded 2-inch cushion thickness to prevent damage. Inspection and acceptance will occur at the origin, and the supplies are destined for delivery to locations including Osan Air Base in South Korea.

General Info

Firm fixed price contract for 25 storage batteries delivered within 60 days.

NAICS

335910 - Battery Manufacturing

Place of Performance

AP, USA

Set-Aside

NONE

Documents

1

Request for Quotations SPE7L7-26-Q-2218 for Storage Batteries

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

4 updates
PhaseClosed
Posted

Solicitation

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUSA

Full Description

Show more
BATTERY, STORAGE
Source from cage 04055 East Penn PN:SLI4DA
SHELF-LIFE TYPE I, 6 MONTHS
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
MSDS/PSDS REQUIRED PER FED-STD-313
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
FULL AND OPEN COMPETITION APPLY
SPE7L7-26-Q-2218
SECTION B
SUPPLY/SERVICE: 6140-01-203-4912 CONT'D
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
RS008: Shelf-life requirement RS001 for a TYPE I (CODE F) item with a shelf life of 6 months (non-extendable) applies to this item.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC CID A-A-55439A NOT 2 REVISION NR A DTD 08/26/2022 PART PIECE NUMBER: AA55439-2-4D-925-D
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE-J537-2016 REVISION NR DTD 04/01/2016 PART PIECE NUMBER: 4D-925
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0001 6140-01-203-4912 1.000 EA $ _______________ $ ______________
BATTERY,STORAGE
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
FOB: ORIGIN DELIVERY DATE: 60 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00 WRAP MAT:ZZ CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:H UNIT CONT:E8 OPI:M PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SHELF LIFE TYPE I, 60 MONTHS Item weighs 65 LBs. dry. Cushion thickness has been upgraded to 2 in. due to more damaged batt. Thickness ( H)
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
SPE7L7-26-Q-2218
SECTION B
SUPPLY/SERVICE: 6140-01-203-4912 CONT'D
FB5294
FB5294 51 LRS LGRDDC
UNIT 2069
APO AP 96278-2069
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
FB5294
FB5294 51 LRS LGRDDC
CP 011 82 +1 (555) 000-0000
OSAN AB BLDG 824 SINJANG DONG
PYEONGTAEK CITY 17759
KR
M/F: (TCN) FB529431160021
RDD: 777
PROJ: TP 2
SUPP ADD: YAZ510 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 08
DIC: A01 DIST: 01 ADV: 2B FC: 6C
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0002 6140-01-203-4912 6.000 EA $ ______________ $ ______________
BATTERY,STORAGE
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
FOB: ORIGIN DELIVERY DATE: 60 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00 WRAP MAT:ZZ CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:H UNIT CONT:E8 OPI:M PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SHELF LIFE TYPE I, 60 MONTHS Item weighs 65 LBs. dry. Cushion thickness has been upgraded to 2 in. due to more damaged batt. Thickness ( H)
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:H
UNIT CONT:E8 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
SPE7L7-26-Q-2218
SECTION B
SUPPLY/SERVICE: 6140-01-203-4912 CONT'D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
SHELF LIFE TYPE I, 60 MONTHS Item weighs 65 LBs. dry. Cushion thickness has been upgraded to 2 in. due to more damaged batt. Thickness ( H)
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
FB5294
FB5294 51 LRS LGRDDC
UNIT 2069
APO AP 96278-2069
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
FB5294
FB5294 51 LRS LGRDDC
CP 011 82 +1 (555) 000-0000
OSAN AB BLDG 824 SINJANG DONG
PYEONGTAEK CITY 17759
KR
M/F: (TCN) FB529443550017
RDD: 777
PROJ: TP 2
SUPP ADD: YAZ922 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 08
DIC: A01 DIST: 01 ADV: 2B FC: 6C
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0003 6140-01-203-4912 4.000 EA $ ______________ $ ______________
BATTERY,STORAGE
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
FOB: ORIGIN DELIVERY DATE: 60 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00 WRAP MAT:ZZ CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:H UNIT CONT:E8 OPI:M PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SHELF LIFE TYPE I, 60 MONTHS Item weighs 65 LBs. dry.
SPE7L7-26-Q-2218
SECTION B
SUPPLY/SERVICE: 6140-01-203-4912 CONT'D
Cushion thickness has been upgraded to 2 in. due to more damaged batt. Thickness ( H)
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:H
UNIT CONT:E8 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SHELF LIFE TYPE I, 60 MONTHS Item weighs 65 LBs. dry. Cushion thickness has been upgraded to 2 in. due to more damaged batt. Thickness ( H)
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:H
UNIT CONT:E8 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SHELF LIFE TYPE I, 60 MONTHS Item weighs 65 LBs. dry. Cushion thickness has been upgraded to 2 in. due to more damaged batt. Thickness ( H)
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
FB5294
FB5294 51 LRS LGRDDC
UNIT 2069
APO AP 96278-2069
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
FB5294
FB5294 51 LRS LGRDDC
CP 011 82 +1 (555) 000-0000
OSAN AB BLDG 824 SINJANG DONG
PYEONGTAEK CITY 17759
KR
M/F: (TCN) FB529450230070
RDD: 777
PROJ: TP 2
SUPP ADD: YAZ922 SIG: A
SPE7L7-26-Q-2218
SECTION B
SUPPLY/SERVICE: 6140-01-203-4912 CONT'D
FOR GOVERNMENT USE ONLY: (IPD) 08
DIC: A01 DIST: 01 ADV: 2B FC: 6C
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0004 6140-01-203-4912 2.000 EA $ ______________ $ ______________
BATTERY,STORAGE
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
FOB: ORIGIN DELIVERY DATE: 60 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00 WRAP MAT:ZZ CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:H UNIT CONT:E8 OPI:M PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SHELF LIFE TYPE I, 60 MONTHS Item weighs 65 LBs. dry. Cushion thickness has been upgraded to 2 in. due to more damaged batt. Thickness ( H)
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:H
UNIT CONT:E8 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SHELF LIFE TYPE I, 60 MONTHS Item weighs 65 LBs. dry. Cushion thickness has been upgraded to 2 in. due to more damaged batt. Thickness ( H)
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:H
UNIT CONT:E8 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SHELF LIFE TYPE I, 60 MONTHS Item weighs 65 LBs. dry. Cushion thickness has been upgraded to 2 in. due to more damaged batt.
SPE7L7-26-Q-2218
SECTION B
SUPPLY/SERVICE: 6140-01-203-4912 CONT'D
Thickness ( H)
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:H
UNIT CONT:E8 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SHELF LIFE TYPE I, 60 MONTHS Item weighs 65 LBs. dry. Cushion thickness has been upgraded to 2 in. due to more damaged batt. Thickness ( H)
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
FB5294
FB5294 51 LRS LGRDDC
UNIT 2069
APO AP 96278-2069
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
FB5294
FB5294 51 LRS LGRDDC
CP 011 82 +1 (555) 000-0000
OSAN AB BLDG 824 SINJANG DONG
PYEONGTAEK CITY 17759
KR
M/F: (TCN) FB529433310034
RDD: 777
PROJ: TP 2
SUPP ADD: YAZ927 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 08
DIC: A01 DIST: 01 ADV: 2B FC: 6C
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0005 6140-01-203-4912 12.000 EA $ ______________ $ ______________
BATTERY,STORAGE
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
FOB: ORIGIN DELIVERY DATE: 60 DAYS ADO
SPE7L7-26-Q-2218
SECTION B
SUPPLY/SERVICE: 6140-01-203-4912 CONT'D
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:H
UNIT CONT:E8 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SHELF LIFE TYPE I, 60 MONTHS Item weighs 65 LBs. dry. Cushion thickness has been upgraded to 2 in. due to more damaged batt. Thickness ( H)
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:H
UNIT CONT:E8 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SHELF LIFE TYPE I, 60 MONTHS Item weighs 65 LBs. dry. Cushion thickness has been upgraded to 2 in. due to more damaged batt. Thickness ( H)
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:H
UNIT CONT:E8 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SHELF LIFE TYPE I, 60 MONTHS Item weighs 65 LBs. dry. Cushion thickness has been upgraded to 2 in. due to more damaged batt. Thickness ( H)
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:H
UNIT CONT:E8 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SHELF LIFE TYPE I, 60 MONTHS Item weighs 65 LBs. dry. Cushion thickness has been upgraded to 2 in. due to more damaged batt. Thickness ( H)
SPE7L7-26-Q-2218
SECTION B
SUPPLY/SERVICE: 6140-01-203-4912 CONT'D
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:H
UNIT CONT:E8 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SHELF LIFE TYPE I, 60 MONTHS Item weighs 65 LBs. dry. Cushion thickness has been upgraded to 2 in. due to more damaged batt. Thickness ( H)
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
FB5294
FB5294 51 LRS LGRDDC
UNIT 2069
APO AP 96278-2069
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
FB5294
FB5294 51 LRS LGRDDC
CP 011 82 +1 (555) 000-0000
OSAN AB BLDG 824 SINJANG DONG
PYEONGTAEK CITY 17759
KR
M/F: (TCN) FB529440850094
RDD: 777
PROJ: TP 2
SUPP ADD: YAZ922 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 08
DIC: A01 DIST: 01 ADV: 2B FC: 6C
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7017510611 0001 N/A N/A N/A 04/28/2023
0002 7017510535 0001 N/A N/A N/A 12/24/2024
0003 7017510534 0001 N/A N/A N/A 01/27/2025
0004 7017510539 0001 N/A N/A N/A 11/30/2023
0005 7017510536 0001 N/A N/A N/A 03/28/2024

SPE7L7-26-Q-2218 NSN/Part Number: 6140-01-203-4912 Quantity: 1 EA Purchase Request: 7017510611QTY: 1 Delivery: 60 days ADO

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 325520
New
DIBBS
RESIN EPOXY
Solicitation # SPE8ES-27-T-0148
Solicitation SPE8ES-27-T-0148 is a total small business set-aside request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of 72 cases of Resin Epoxy, identified by NSN 8040-01-664-1544. Each case must contain 12 units. The requirement is for delivery FOB Destination to the HAZMINCEN Naval Base Ventura County in Port Hueneme, California, with an original required delivery date of October 23, 2026, and a delivery window of 20 days after the order is placed. The material is classified as a Type I (Code K) item with a non-extendable shelf life of 18 months, calculated from the date of shipment. Due to the hazardous nature of the material, the supplier must provide Safety Data Sheets and Hazardous Communication Standard labels for review and approval prior to the award, adhering to 29 CFR 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with specific storage instructions to maintain a temperature between 60 and 80 degrees Fahrenheit. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates several critical federal and defense clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information. Inspection and acceptance will occur at the destination point.
Adhesive Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS