Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BEARING, BALL, ANNULA

Active
SPE4A6-26-T-12X4Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation is for the procurement of six annular ball bearings, part number 2306M, under solicitation number SPE4A6-26-T-12X4. The contract requires delivery within 20 days and specifies that the items must be delivered FOB Origin. Strict adherence to packaging, marking, and preservation standards is required, specifically citing MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-197M, along with DLA packaging requirements RP001. A critical requirement of this contract is the domestic sourcing restriction for ball and roller bearings. The bearings must be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the total cost of the bearing components originating from these regions. Contractors must provide a signed declaration regarding the domestic or foreign nature of the materials offered to be considered for the award. Failure to meet these sourcing requirements may lead to the cancellation of the solicitation unless a formal waiver is approved.

General Info

Procure six 2306M annular ball bearings, domestic sourcing required, delivery within 20 days.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-12X4.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
CHARLEEN WEBER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BEARING,BALL,ANNULA
FOREIGN BEARINGS:
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RESTRICTION ON THE ACQUISITION OF BALL AND ROLLER BEARINGS (JUN 2011)
AN AWARD FROM THIS SOLICITATION CAN ONLY BE MADE FOR A BEARING
MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA AND FOR
EACH BALL OR ROLLER BEARING, THE COST OF THE BEARING COMPONENTS (ROLLING
ELEMENTS, RETAINER, INNER RACE, OR OUTER RACE) MANUFACTURED IN THE
UNITED STATES, ITS OUTLYING AREAS, OR CANADA MUST EXCEED 50% OF THE
TOTAL COST OF THE BEARING COMPONENTS OF THAT BALL OR ROLLER BEARING. SEE
DFARS CLAUSE 252.225-7016, RESTRICTION ON ACQUISITION OF BALL AND ROLLER
BEARINGS.
A CONTRACTOR’S DECLARATION ON THE DOMESTIC/FOREIGN NATURE OF MATERIAL
BEING OFFERED IS REQUIRED. PLEASE VISIT THE FOREIGN BEARING WEBSITE AT
https://www.dla.mil/Aviation/Business/Foreign-Bearing-Waiver/. TO OBTAIN A COPY OF THE CONTRACTOR’S DECLARATION. PLEASE PRINT, COMPLETE, SIGN AND HAVE READY FOR SUBMISSION UPON REQUEST FROM THE BUYER. FAILURE TO PROVIDE THIS INFORMATION MAY RESULT IN YOUR QUOTE NOT BEING CONSIDERD FOR AWARD.
IN THE EVENT NO OFFERED BEARINGS MEET THIS SOURCING REQUIREMENT, THIS SOLICITATION MAY BE CANCELLED OR HELD PENDING A WAIVER APPROVAL REQUESTED BY THE PROCUREMENT ACTIVITY. UPON RECEIPT OF AN APPROVED WAIVER FROM THE DOMESTIC SOURCING RESTRICTION, THE REQUIREMENT MAY BE RE-SOLICITED OR BUYER MAY REQUEST A QUOTE EXTENSION. SEE DFARS 225.7009-4, WAIVER, RESTRICTION ON BALL AND ROLLER BEARINGS.
CAGE 52676 SKF
FAG BEARINGS CORPORATION 43991 P/N 2306M SKF USA INC. 52676 P/N 2306M
SPE4A6-26-T-12X4
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7014962235 0001 EA 6.000
NSN/MATERIAL:3110012043421
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION, PACKAGING, PACKING, AND MARKING REQUIREMENTS SHALL BE IN ACCORDANCE WITH MIL-DTL-197M.
1. METHOD OF PRESERVATION SHALL BE DETERMINED BY BEARING TYPE AND SIZE (REFER TO TABLE I).
2. PARAGRAPH 3.10.2, SELECTION OF UNIT PRESERVATION, APPLIES. PROTECTIVE LUBRICANT OR PRESERVATIVE COMPOUND SHALL BE DETERMINED DEPENDENT UPON BEARING TYPE AND CLOSURE IN ACCORDANCE WITH PARAGRAPH 3.3.4 AND TABLE II. FOR PRESERVATION PROCESS CONTROLS, DEPENDANT UPON BEARING TYPE, CLOSURE, AND LUBRICANT<(>,<)> PARAGRAPHS 3.4 THROUGH 3.9 APPLY.
3. PACKAGING PRECAUTIONARY MARKING REQUIREMENTS OF PARAGRAPH 3.12.4 APPLY.
4. CONTRACTOR'S PACKAGING FACILITY SHALL ADHERE TO THE QUALITY ASSURANCE VERIFICATION REQUIREMENTS AS CONTAINED WITHIN SECTION 4 OF MIL-DTL-197M. ...END OF SPECIAL PACKAGING NSN/Part Number: 3110-01-204-3421 Quantity: 6 EA Purchase Request: 7014962235QTY: 6 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULA
Solicitation # SPE4A6-26-T-27HX
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of three annular ball bearings under part number 3110-01-254-5460. The contract requires delivery within 20 days after receipt of order and is subject to specific technical and quality requirements outlined in the DLA Master List. Key compliance mandates include adherence to DLA packaging standards, inspection and acceptance at origin, and the use of certified measuring and test equipment. The contract contains strict security and regulatory requirements, including Covered Defense Information and CMMC Level 2 certification. Because the item involves technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete mandatory training to access the data. The solicitation is identified by number SPE4A6-26-T-27HX and falls under NAICS code 332991.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
CONE, TAPERED ROLLER BE
Solicitation # SPE4A6-26-T-28CS
This solicitation, numbered SPE4A6-26-T-28CS, is for the procurement of 12 tapered roller bearing cones, identified by NSN 3110-01-698-8373 and part number HC3Z-4561-C. The contract requires delivery within 20 days after order, with FOB origin shipping and inspection and acceptance occurring at the destination. Compliance with various technical and quality requirements is mandatory, including specific DLA packaging standards, measuring and test equipment protocols, and marking requirements per MIL-STD-129. A critical requirement of this contract is the restriction on the acquisition of ball and roller bearings. The items must be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the total cost of the bearing components originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials offered to be considered for the award. Packaging and preservation must strictly adhere to MIL-DTL-197M and RP001 standards.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULA
Solicitation # SPE4A6-26-T-28EY
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-28EY, is for the procurement of 42 annular ball bearings identified by NSN 3110-00-293-9430. The contract requires delivery within 23 days after receipt of order, with the place of performance located at Tinker AFB. The procurement is subject to strict export control regulations under ITAR and EAR, meaning technical data cannot be shared with foreign persons without prior authorization from the Department of State or Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification and complete specific DLA training and questionnaires. Additionally, all items must adhere to DLA packaging requirements for procurement.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, WASHER, THRUST
Solicitation # SPE4A0-26-T-4759
This solicitation, issued by the Department of Defense Aviation Supply Chain ESOC Buys, is for the procurement of one thrust washer bearing under part number 3120-01-497-6347. The contract requires a rapid delivery turnaround of five days after receipt of order, with performance taking place in Pearl Harbor. The agreement is subject to stringent regulatory requirements, including DLA packaging standards, physical item marking, and CMMC Level 2 cybersecurity certification. Furthermore, the technical data associated with this item is subject to ITAR or EAR export controls, meaning access is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE7L5-26-T-5338
This contract is for the procurement of one sleeve bearing, identified by NSN 3120007574154 and part number 2391314-1 from Fairbanks Morse, LLC. The item is designated as a critical application item and must be delivered within five days of order to the Commander, U.S. Coast Guard Surface Forces Logistics Center in Baltimore, Maryland. Shipping must be conducted via the fastest traceable means, excluding parcel post, with delivery terms set as FOB Origin. The agreement mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by ISO 9001:2015 standards, with inspection and acceptance occurring at the origin. Sampling must follow MIL-STD-1916 or ASQ H1331, and the contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware or packaging. Technical and quality requirements are further detailed in the DLA Master List.
LAND SUPPLIER OPNS ENGINES

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
HOUSING, BEARING UNIT
Solicitation # SPE4A6-26-T-27SS
This contract is for the procurement of one bearing unit housing, identified as a commercial off the shelf critical application item with NSN 3130014182842 and Alfa Laval part number 8709685-01. The item is source controlled, meaning it must be manufactured and tested according to specific limited rights data, and only vendors with access to this data or approved source traceability are eligible to quote. The delivery is set for 171 days after order, with a required delivery date of December 8, 2026, and shipping to the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or its packaging. Inspection and acceptance will occur at the origin, and the contract incorporates various technical and quality requirements as defined in the DLA master list.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, PLAIN, SPHER
Solicitation # SPE4A6-26-T-28GR
The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A6-26-T-28GR for the procurement of nine spherical plain bearings. These components are identified by NSN 3120-01-693-6032 and are associated with purchase request 7016844093. This federal solicitation was posted on September 9, 2026, and requires a response by the deadline of September 17, 2026. Interested parties can find further details and submit responses through the DIBBS portal.
Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
ADAPTER SLEEVE, BEAR
Solicitation # SPE4A6-26-T-58R1
This contract is for the procurement of 15 adapter sleeves for bearings, identified by NSN 3110-01-738-1480 and part number 5230203 from Whippany Actuation Systems, LLC. The solicitation, issued by the Department of Defense ASC Commodities Division, specifies a delivery timeframe of 162 days with FOB origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA technical and quality requirements, including specific standards for packaging, marking, and preservation such as MIL-STD-129 and MIL-DTL-197M. Quality assurance is governed by zero-based sampling plans under MIL-STD-1916 or ASQ H1331, and the contractor must comply with regulations regarding the removal of government identification from non-accepted supplies and the handling of covered defense information.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULA
Solicitation # SPE4A6-26-T-28JA
This contract is a solicitation for one annular ball bearing, identified by NSN 3110-01-714-1717 and Deere & Company part number M173498. The requirement specifies a delivery timeframe of 20 days with FOB Origin shipping and destination-based inspection and acceptance. Compliance with various DLA technical and quality requirements is mandatory, including specific standards for packaging, physical identification, and the removal of government identification from non-accepted supplies. A critical component of this procurement is the domestic sourcing restriction, which mandates that the bearing must be manufactured in the United States, its outlying areas, or Canada. Additionally, the cost of the bearing components produced in these regions must exceed 50 percent of the total component cost. Contractors must provide a formal declaration regarding the domestic or foreign nature of the material to be considered for the award. Quality assurance will be conducted using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-26-T-27QB
This contract is a solicitation for the procurement of 10 annular ball bearings, identified by NSN 3110-01-282-0445. The items are designated as critical application commercial items with a delivery requirement of 171 days FOB Origin. Compliance with DLA technical and quality requirements is mandatory, including specific packaging and preservation standards per MIL-DTL-197M and MIL-STD-129. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. A significant restriction applies to the acquisition of these bearings, requiring them to be manufactured in the United States, its outlying areas, or Canada. Furthermore, the cost of the bearing components produced in these regions must exceed 50 percent of the total component cost. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials offered to be considered for the award. Item Unique Identification is not required for this specific request.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-28DY
This solicitation issued by the Department of Defense ASC Commodities Division is for the procurement of 83 sleeve bushings, identified by NSN 3120-01-280-0631. The contract requires delivery within 195 days after the order is placed, with the place of performance located at Hill AFB. The procurement is governed by specific technical and quality requirements outlined in the DLA Master List, including specialized packaging and inspection and acceptance at origin. Strict compliance is required regarding the handling of covered defense information and export-controlled technical data under ITAR and EAR regulations. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. Item Unique Identification is not required for this specific order. Interested parties must respond by September 17, 2026.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-24XW
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of one sleeve bushing, identified by NSN 3120-01-138-9659. The contract requires delivery within five days after the order is placed and is categorized under NAICS code 332991. Performance is designated for Portsmouth, Massachusetts. The contract mandates strict adherence to several technical and quality requirements, including CMMC Level 2 certification for third-party assessment and specific physical identification and marking standards. It also emphasizes rigorous export control compliance under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training to handle technical data. Inspection and acceptance will occur at the origin, and all packaging must meet DLA procurement standards.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335931
New
DIBBS
Manufacture and Supply of Special Purpose Electrical Cable Assemblies (NSN 5995-01-113-6852)
Current-Carrying Wiring Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, POWER, E
Solicitation # SPE4A6-26-T-28AU
This contract is for the procurement of 27 electrical power cable assemblies under solicitation number SPE4A6-26-T-28AU for the Department of Defense. The items are identified by NSN 6150-01-736-3850 and are associated with purchase request 7018247687. Delivery is required within 171 days after the order, with a need ship date of March 8, 2027, and an original required delivery date of July 2, 2027. The terms specify that delivery, inspection, and acceptance will all occur at the point of origin. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with a specific prohibition on the use of mercury or mercury compounds. The final destination for the shipment is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SPACER, BALL
Solicitation # SPE4A6-26-T-24RC
This contract is a solicitation for the procurement of 313 ball spacers, identified as NSN 1440-00-961-5057 and Boeing part number 29-13703-3. The item is designated as a critical application item. Delivery is required within 81 days after order, with a need ship date of November 29, 2026, and an original required delivery date of December 4, 2027. The shipment is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including ISO 9001:2015 standards for manufacturers. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Quality assurance and sampling must be conducted according to MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Inspection and acceptance will occur at the destination.
Other Electronic Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-27HP
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of one machine screw, identified by NSN 5305-01-722-7744. The contract requires delivery within 20 days after receipt of order and specifies that the place of performance is in Mechanicsburg, Pennsylvania. The contractor must adhere to strict quality and security standards, including CMMC Level 2 certification and compliance with DLA packaging and marking requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 standards. Additionally, the item is subject to ITAR and EAR export controls, requiring the contractor to have an approved US/Canada Joint Certification Program certification and completed export-control training to access technical data.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-27KW
This contract is for the procurement of 158 machine screws under NSN 5305006196447. The items are designated as critical application items and must adhere to specific technical standards, including NAS623 Revision 8 and NAS498 Revision 14. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a strict requirement for zero non-conformances in sample lots unless otherwise specified. Delivery is required within 535 days, with a need ship date of March 6, 2028, and a final delivery date of March 14, 2028. The items are to be shipped FOB Origin to DLA Distribution Jacksonville, Florida. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements for procurement. Inspection and acceptance will take place at the destination.
Nonferrous Forging

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-27YR
This solicitation, numbered SPE4A6-26-T-27YR, is issued by the Department of Defense ASC Commodities Division for the procurement of 138 socket head cap screws under NSN 5305-01-661-2446. The contract is designated as a Total Small Business Set-Aside with a delivery requirement of 171 days after the order is placed. Performance is centered in New Cumberland, Pennsylvania, under NAICS code 332722. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards and physical item marking. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract requires CMMC Level 2 certification and strict compliance with ITAR and EAR export controls, limiting the distribution of technical data to approved contractors with US/Canada Joint Certification Program certification.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
THERMOCOUPLE, IMMERSION
Solicitation # SPE4A6-26-T-24TL
This contract is for the procurement of two immersion thermocouples, identified by NSN 6685-01-321-3326 and part number TC45000-1 from Semco Instruments, Inc. The order is managed by the ASC Commodities Division of the Department of Defense under solicitation SPE4A6-26-T-24TL. Delivery is required within five days, with FOB, inspection, and acceptance all occurring at the point of origin. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 for marking, while specifying that Item Unique Identification is not required. Quality assurance will be conducted via sampling methods according to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Technical and quality standards are governed by the DLA Master List, and the contract specifies a zero percent quantity variance.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, POWER, E
Solicitation # SPE4A6-26-T-28CL
This contract is for the procurement of one electrical power cable assembly, identified by NSN 5995-01-671-3482 and part number 90-005-0021-12 from SATCOM and Antenna Technologies Inc. The item is designated as a critical application item and requires adherence to specific DLA technical and quality requirements, including physical identification and bare item marking. The material has no shelf life requirement, and sampling must comply with MIL-STD-1916 or ASQ H1331. Delivery is required within five days of order, with the original required delivery date set for September 3, 2026. The shipment is FOB Origin and will be inspected and accepted at the destination. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with palletization adhering to DLA packaging requirements. The final delivery destination is the Commanding Officer at Cherry Point, North Carolina.
Current-Carrying Wiring Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-T-27ZD
This contract, identified as solicitation SPE4A6-26-T-27ZD, is issued by the Department of Defense ASC Commodities Division for the procurement of 162 plain hexagon nuts under NSN 5310-01-675-7527. The delivery is required within 171 days after the order, with a need ship date of March 8, 2027, and an original required delivery date of April 20, 2027. The shipment is designated as FOB Origin, with both inspection and acceptance occurring at the destination. The items are to be delivered to DLA Distribution San Joaquin in Tracy, California. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. Additionally, the contract prohibits the use of mercury or mercury compounds in the preservation, packaging, and marking processes. There is no quantity variance permitted for this order.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, PLATE
Solicitation # SPE4A6-26-T-27HV
This contract, identified as solicitation SPE4A6-26-T-27HV, is for the procurement of 1,343 self-locking plate nuts under NSN 5310-01-054-0840. The order is issued by the Department of Defense through the ASC Commodities Division with a required delivery timeframe of 83 days after receipt of order. Performance is designated for San Diego, California. The agreement mandates strict adherence to quality and security standards, including CMMC Level 2 certification and compliance with ITAR and EAR export controls. Technical and quality requirements are governed by the DLA Master List, and sampling must follow MIL-STD-1916 or ASQ H1331. Additionally, the contract requires specific physical identification marking, DLA packaging standards, and strict configuration change management protocols.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
BUS, CONDUCTOR
Solicitation # SPE4A6-26-T-27WT
This solicitation, issued by the ASC Commodities Division of the Department of Defense, is for the procurement of one conductor bus, identified as a commercial off the shelf item under NSN 6150-01-559-9742. The contract requires delivery within 171 days after the order is placed and specifies that the item must be delivered to New Cumberland, Pennsylvania. The agreement includes strict adherence to DLA master lists for technical and quality requirements, as well as specific packaging and documentation standards for source approval requests. It explicitly prohibits the intentional addition of mercury or mercury containing compounds, except in specific functional cases like batteries or sensors. Additionally, the contract notes that covered defense information applies and that item unique identification is not required for this specific service customer.
Other Electronic Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-27UP
This contract for PIN-RIVET (NSN 5320-01-477-5839) involves the procurement of 31 units under solicitation SPE4A6-26-T-27UP. The agreement specifies a delivery timeframe of 171 days after the order, with a required delivery date of November 23, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution facility in New Cumberland, Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. Quality assurance is governed by tailored higher level requirements, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. The item is designated as a critical application item, with approved part numbers and manufacturers including The Boeing Company, Fastener Innovation Technology, and Howmet Global Fastening Systems, among others.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS