Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BEARING, BALL, ANNULA

Active
SPE4A6-26-T-11HUFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract solicits a single annular ball bearing with NSN 3110-01-682-5590 and part number 7044-0040, requiring delivery of one unit within 20 days under FOB origin terms with no quantity variance allowed. Inspection and acceptance occur at destination, and packaging must strictly comply with MIL-STD-2073-1E, MIL-DTL-197M, and DLA packaging standards, including preservation, marking per MIL-STD-129, and palletization requirements. The bearing is subject to significant sourcing restrictions under DFARS 252.225-7016, mandating that it be manufactured in the United States, its outlying areas, or Canada, with over 50% of the cost of all components—rolling elements, retainer, inner race, and outer race—originating from these regions. A contractor declaration documenting the domestic or foreign origin of materials must be submitted upon request; failure to provide this may disqualify the quote. The solicitation may be canceled or held pending a waiver if no compliant bids are received, as outlined in DFARS 225.7009-4. Technical and quality requirements are incorporated via the DLA Master List, with additional controls on measuring equipment, supplier documentation, removal of government identification from non-accepted items, and tailored quality requirements applying to both manufacturers and non-manufacturers. Unit of issue is EA, and all marking, preservation methods, and packaging precautions must follow referenced military specifications. The point of contact for inquiries is Alexis Dunnavant of the ASC Commodities Division, Department of Defense.

General Info

One annular ball bearing, US/Canada-made, FOB origin, strict MIL-STD packaging, no variance, delivery in 20 days.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

BUILDING 5/SEC O, D2, LOXLEY, AL, 36551, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-11HU.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Alexis Dunnavant
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BEARING,BALL,ANNULA
BEARING, BALL, ANNULAR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
IDENTIFY TO:
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
BEARING RESTRICTION:
RESTRICTION ON THE ACQUISITION OF BALL AND ROLLER BEARINGS (JUN 2011)
AN AWARD FROM THIS SOLICITATION CAN ONLY BE MADE FOR A BEARING
MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA AND FOR
EACH BALL OR ROLLER BEARING, THE COST OF THE BEARING COMPONENTS (ROLLING
ELEMENTS, RETAINER, INNER RACE, OR OUTER RACE) MANUFACTURED IN THE
UNITED STATES, ITS OUTLYING AREAS, OR CANADA MUST EXCEED 50% OF THE
TOTAL COST OF THE BEARING COMPONENTS OF THAT BALL OR ROLLER BEARING. SEE
DFARS CLAUSE 252.225-7016, RESTRICTION ON ACQUISITION OF BALL AND ROLLER
BEARINGS.
A CONTRACTOR’S DECLARATION ON THE DOMESTIC/FOREIGN NATURE OF MATERIAL
BEING OFFERED IS REQUIRED. PLEASE VISIT THE FOREIGN BEARING WEBSITE AT
https://www.dla.mil/Aviation/Business/Foreign-Bearing-Waiver/. TO OBTAIN A COPY OF THE CONTRACTOR’S DECLARATION. PLEASE PRINT, COMPLETE, SIGN AND HAVE READY FOR SUBMISSION UPON REQUEST FROM THE BUYER. FAILURE TO PROVIDE THIS INFORMATION MAY RESULT IN YOUR QUOTE NOT BEING CONSIDERD FOR AWARD.
SPE4A6-26-T-11HU
SECTION B
IN THE EVENT NO OFFERED BEARINGS MEET THIS SOURCING REQUIREMENT, THIS
SOLICITATION MAY BE CANCELLED OR HELD PENDING A WAIVER APPROVAL
REQUESTED BY THE PROCUREMENT ACTIVITY. UPON RECEIPT OF AN APPROVED
WAIVER FROM THE DOMESTIC SOURCING RESTRICTION, THE REQUIREMENT MAY BE
RE-SOLICITED OR BUYER MAY REQUEST A QUOTE EXTENSION. SEE DFARS
225.7009-4, WAIVER, RESTRICTION ON BALL AND ROLLER BEARINGS.
KLB ENTERPRISES CORP 3RLV5 P/N 7044-0040
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017659138 0001 EA 1.000
NSN/MATERIAL:3110016825590
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION, PACKAGING, PACKING, AND MARKING REQUIREMENTS SHALL BE IN ACCORDANCE WITH MIL-DTL-197M.
1. METHOD OF PRESERVATION SHALL BE DETERMINED BY BEARING TYPE AND SIZE (REFER TO TABLE I).
2. PARAGRAPH 3.10.2, SELECTION OF UNIT PRESERVATION, APPLIES. PROTECTIVE LUBRICANT OR PRESERVATIVE COMPOUND SHALL BE DETERMINED DEPENDENT UPON BEARING TYPE AND CLOSURE IN ACCORDANCE WITH PARAGRAPH 3.3.4 AND TABLE II. FOR PRESERVATION PROCESS CONTROLS, DEPENDANT UPON BEARING TYPE, CLOSURE, AND LUBRICANT<(>,<)> PARAGRAPHS 3.4 THROUGH 3.9 APPLY.
3. PACKAGING PRECAUTIONARY MARKING REQUIREMENTS OF PARAGRAPH 3.12.4 APPLY.
4. CONTRACTOR'S PACKAGING FACILITY SHALL ADHERE TO THE QUALITY ASSURANCE VERIFICATION REQUIREMENTS AS CONTAINED WITHIN SECTION 4 OF
SPE4A6-26-T-11HU
SECTION B
PR: 7017659138 PRLI: 0001 CONT’D
MIL-DTL-197M.
...END OF SPECIAL PACKAGING NSN/Part Number: 3110-01-682-5590 Quantity: 1 EA Purchase Request: 7017659138QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
CASE, PHOTOGRAPHIC EQUI
Solicitation # SPE8E9-26-T-3276
The contract specifies the procurement of five solid black photographic equipment cases manufactured by Pelican Products Inc. under NSN 6760-01-503-9102 and part number 1060, with a unit price of $5.00 and a total contract value of $25.00. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and must comply with DLA’s packaging requirements as outlined in RP001, including adherence to MIL-STD-129 for marking and labeling and ASTM D3951 for packaging, unless superseded by higher-priority DLA Master List of Technical and Quality Requirements. The items must be palletized according to DLA standards, and no ozone-depleting substances may be used. The delivery address is a military postal address in FPO AP 96657, and transportation instructions reference DLAD Proc Notes C19 and C20. Inspection and acceptance both occur at the destination. The solicitation, numbered SPE8E9-26-T-3276, was posted on August 2, 2026, with a response deadline of August 13, 2026, and is classified under NAICS code 332991. The contract includes restrictions on submitting technical data requests to DLA Troop Support due to the absence of an approved technical data package and identifies covered defense information that may apply. The point of contact is Matthew Kruc, and all vendor communications must use the VSM shipping system.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A0-26-T-4130
The contract specifies the procurement of one sleeve bearing with NSN 3120-01-239-1371 and part number 0101-0363, sourced exclusively from Cummins Power Generation Inc. (CAGE 44940), designated as a critical application item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede any other standards unless otherwise contractually modified. The item must comply with stringent packaging specifications per MIL-STD-129 and ASTM D3951, with palletization adhering to DLA Packaging Requirements for Procurement. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components such as batteries, instruments, or chemical reagents specified by NAVSEA, and any permitted mercury-containing portable devices must feature shockproof construction and secondary containment. Sampling and inspection protocols require adherence to MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise directed, and attributes are assigned specific verification levels or AQLs. Delivery is mandated within five days of contract award under FOB Origin terms, with inspection and acceptance occurring at the destination. Shipping must be traceable and exclude parcel post, using the designated RDD and NMCS codes. The delivery point is Fort Eustis, VA, identified by the W26RK4 routing code and W6YN ship-to address. The contract enforces precise marking of all packages and the bare item in compliance with RQ017, and government identification must be removed from non-accepted supplies as per RQ011. Unit of issue is each (EA), with no variance allowed in quantity. The required delivery date is July 27, 2026, and the item is subject to all applicable DLA Master List requirements, including those for measuring and test equipment (RT001), tailored quality provisions (RQ001), and covered defense information (RD003). The point of contact for inquiries is Danita Davis, with the solicitation open for response until August 10, 2026.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-11FE
The contract pertains to the procurement of three sleeve bearings identified by NSN 3120-01-198-2352 and part number KDJ08C015-241, with delivery required within 169 days to Robins Air Force Base in Georgia. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, and manufacturing may involve casting or forging processes, necessitating potential tooling that the government does not necessarily possess; suppliers must submit a Casting and Forging Assistance Request if needed. The bearings must comply with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and containerization, and marking must follow MIL-STD-129 with no special marking codes applied. Unit of issue is each, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Although item unique identification is not required per the service customer’s request, physical identification and bare item marking are still mandatory. The contract is governed by DFARS clauses and DLA packaging directives, with delivery FOB origin and transportation logistics defined by DLA procedural notes. The sole approved source data includes multiple manufacturers with identical part numbers, and the contract originates from the Department of Defense’s ASC Commodities Division under solicitation SPE4A6-26-T-11FE, responding to purchase request 7012343205 with a need ship date of November 16, 2025, and an original required delivery date of March 25, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING HALF SET, SLEEV
Solicitation # SPE4A6-26-T-11JH
This contract is for the procurement of 617 units of Bearing Half Set, Sleeve, identified by NSN 3120-00-843-6994 and purchase request 7017720752, under solicitation SPE4A6-26-T-11JH. The item is to be delivered FOB origin within 170 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, requiring each sleeve to be individually wrapped in neutral paper to prevent contact or damage. The packaging and preservation methods are strictly controlled, with prohibition of mercury or mercury-containing compounds in any preservation, packaging, or marking materials, consistent with NAVSEA 5100-003D guidelines. The item is marked as a Critical Application Item with identified approved part numbers from Oshkosh Defense LLC, Rolls-Royce Solutions America Inc, Penske Power Systems Pty Ltd, and Federal-Mogul Corporation, all produced to TDP Rev B per QAP 13873 QAP-B02 dated 12/11/2013. Unit of issue is EA, representing two half sleeves per unit. Item Unique Identification is not required per customer request, and government identification must be removed from non-accepted supplies. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 28, 2027, after an original required delivery date of January 4, 2027. Technical and quality requirements referenced via R-numbers are governed by the DLA Master List, with revisions tied to solicitation or award dates depending on acquisition type.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
CASE, PHOTOGRAPHIC E
Solicitation # SPE8EN-26-T-2763
The contract is for a black pick-and-pluck photographic equipment case measuring 24 inches in length, width, and depth, designed for secure storage and transport of sensitive gear. The case features customizable foam padding to secure equipment within its interior dimensions. Technical and quality requirements referenced under RA001 are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards under RP001, and all supplies must be stripped of government identification if rejected under RQ011. Source approval documentation is required per RC001, and the item is subject to Covered Defense Information protocols under RD003. The product must not contain intentionally added mercury or mercury compounds, except in approved exceptions such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specific chemical reagents. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. The item does not require ozone-depleting substances. The National Stock Number is 6760-01-519-0701, with one unit required under purchase request 7017699571, to be delivered within 20 days after award. The solicitation number is SPE8EN-26-T-2763, issued August 2, 2026, with responses due by August 13, 2026, under NAICS code 332991, and the point of contact is Jennifer Esworthy at DLA, with delivery to North Kingstown, RI 02852-7538.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332991
New
DIBBS
BEARING, PLAIN, ROD E
Solicitation # SPE4A0-26-T-4137
The contract is for the procurement of one plain rod bearing, part number 3120-01-553-8346, under solicitation SPE4A0-26-T-4137, with delivery required within five days FOB origin. The item is designated as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. All packaging, preservation, and marking must conform to MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129, including specific preservation methods tailored to bearing type and closure, selection of protective lubricants per established tables, and adherence to quality assurance verification protocols. Inspection and acceptance occur at destination with zero tolerance for non-conformances under sampling plans defined by MIL-STD-1916 or ASQ H1331, with unspecified attributes treated as major. The contractor must provide documentation for source approval and ensure physical marking per RQ017, with all units individually identified per approved part numbers from approved suppliers including Appleton Marine Inc and JARP Industries, Inc. The unit of issue is each, with no variance allowed in quantity, and special packaging codes and markings must be applied as required under the contract's special packaging clause.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, SELF-AL
Solicitation # SPE4A6-26-T-11DG
This contract specifies the procurement of a self-aligning roller bearing with part numbers 22214, 22214YMW33, 2D3-03458, 2E3-00293, and 22214E, supplied by manufacturers including Timken, Lake Shore Systems, and SKF USA Inc. The item is identified as a commercial item and must be manufactured in the United States, its outlying areas, or Canada, with over 50% of the total bearing component costs originating from these regions, as mandated by DFARS clause 252.225-7016. Contractors must submit a declaration confirming the domestic or foreign origin of materials, and failure to do so will disqualify their quote. The bearing is classified as a critical application item, and any mercury or mercury-containing compounds are strictly prohibited unless used in exempted applications such as batteries, fluorescent lights, or specified naval instruments, with portable mercury-containing devices requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which override any other standards including ASTM D3951. Sampling inspections must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with specified attributes assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively, and unspecified attributes treated as major. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization in line with DLA standards. Items must be delivered FOB origin within 20 days to Picatinny Arsenal, New Jersey, using traceable freight methods—parcel post is forbidden. The delivery includes four units with no variance allowed, inspected and accepted at destination, and marked with the NSN 3110-00-950-2376. The solicitation is open for response until August 10, 2026, with a contract award contingent upon compliance with sourcing restrictions and quality provisions.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULA
Solicitation # SPE4A6-26-T-11DE
The solicitation seeks two ball annular bearings with NSN 3110002770461, under contract SPE4A6-26-T-11DE, for delivery within five days FOB origin. The item must be manufactured in the United States, its outlying areas, or Canada, with over 50% of the total cost of all bearing components—rolling elements, retainer, inner race, and outer race—originating from these regions. Contractors must submit a completed Declaration on the Domestic/Foreign Nature of Material obtained from the DLA Foreign Bearing Waiver website; failure to provide this may disqualify the quote. If no compliant offers are received, the solicitation may be canceled or held pending a waiver request under DFARS 225.7009-4. Packaging, preservation, and marking must strictly follow MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129, with preservation methods and protective compounds selected per bearing type and closure as outlined in the referenced standards. All units must be palletized per DLA packaging requirements, and the item must be physically marked per identified part numbers for Raymond Corp, Northrop Grumman, and Meritor entities. Inspection and acceptance occur at destination with zero variance allowed in quantity. The procurement is under NAICS code 332991 and is managed by the DLA Combat Support, ASC Commodities Division, with Stuart Dowdy as the point of contact.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-11GM
The contract is for the procurement of four bushings, sleeves with NSN 3120-01-515-9516 under solicitation SPE4A6-26-T-11GM, with a delivery deadline of 20 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific references to CMMC Level 2 certification for the third-party assessment organization and adherence to DLA packaging standards. The item must not contain intentional mercury or mercury compounds unless exempted for specific functional applications such as batteries, fluorescent lights, instruments, sensors, weapon systems, or approved chemical reagents; any portable fluorescent lamps or instruments containing mercury must be shockproof and have a secondary containment boundary per NAVSEA 5100-003D. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. Technical data associated with this item is subject to export controls under ITAR or EAR, and dissemination is restricted to contractors with approved US/Canada Joint Certification Program status, completed training on DOD export-controlled data handling, and formal approval from DLA. All distribution, including to foreign nationals within the United States, requires explicit authorization and compliance with DFARS 252.225-7048. The solicitation was posted on August 2, 2026, with responses due August 10, 2026, and performance is assigned to Groton, Connecticut under the Department of Defense, specifically the ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-11CX
The contract specifies the procurement of a bushing, sleeve identified by NSN 3120-01-243-0802 and part number NAS76B3-027P, with a quantity of 49 units to be delivered FOB origin within 169 days. The item is designated as a commercial item and is classified as a critical application item with no shelf life requirement. Inspection and acceptance are both to occur at origin, and zero non-conformances are required in the sampled lot unless otherwise stated, governed by MIL-STD-1916 or an equivalent zero-based sampling plan. Attributes are to be verified at specified levels—VII, IV, and II—or corresponding AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. The item must comply with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with palletization following DLA packaging requirements. Item Unique Identification is not required per service customer request and DFARS 252.211-7003(c)(1)(i) applies. The technical and quality requirements referenced are drawn from the DLA Master List, and the material is subject to potential covered defense information controls. Packaging details include unit packaging method 33, dry climate control, no cushioning material, and unit containers as BE with intermediate containers coded as E5. The delivery destination is specified as Tracy, California, with a required ship date of January 27, 2027, and the original delivery deadline set for March 20, 2027. The purchase request is 7017703291 at a unit price of $49.00 for a total price of $2,401. All contractual terms are consistent with DLA procedural notes and standardized unit of issue guidelines.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
LINER, BEARING HOUSI
Solicitation # SPE4A6-26-T-11GZ
This contract pertains to the procurement of one unit of a liner bearing housing, identified by NSN 3130017057090 and part number 363-20280, under solicitation SPE4A6-26-T-11GZ. The item must be delivered within 20 days to the destination FOB, with no tolerance for quantity variance, and is subject to inspection and acceptance at the delivery point. Technical and quality requirements are governed by the DLA Master List, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific codes for packaging method, wrapping, and container types. The item does not require Unique Item Identification per Service customer request, and government identifiers must be removed from non-accepted supplies. Packaging must follow DLA’s procurement standards, with no special marking indicated. The delivery address is the USS Hyman G. Rickover (SSN 795), FPO AE 09591, and shipment must utilize the fastest traceable means, excluding parcel post. The RDD code is 777, with transportation logistics governed by DLA procedural notes, and the contract references additional project and supplier codes for tracking and compliance. The original required delivery date is July 17, 2026, and the solicitation was issued August 2, 2026, with responses due by August 10, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-11BY
The contract pertains to the procurement of 12 Bushings, Sleeves with NSN 3120-99-980-8985 and part number 03657540DT supplied by KNDS Defence UK Limited. Delivery is required within five days of contract award, with FOB Origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination, with packaging mandated to comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and container types, and marking required to meet MIL-STD-129 without special markings. Packaging must adhere to DLA’s broader procurement requirements, and palletization is governed by the same standards. Shipments must be sent via the fastest traceable method, excluding parcel post, to the designated delivery point in Texarkana, Texas. The item is not subject to Item Unique Identification per Service customer request, and DFARS 252.211-7003(c)(1)(i) applies. Quality verification follows sampling protocols outlined in MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified, and attribute classifications default to critical, major, and minor levels with associated AQLs unless defined in drawings or specifications. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contract is issued under solicitation SPE4A6-26-T-11BY with a response deadline of August 10, 2026, and the required delivery date is June 29, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11GX
This contract specifies the procurement of a cable assembly with part number 941292 and NSN 6150-01-678-1631, requiring two units to be delivered within five days of contract award. The items must meet all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, enforcing zero non-conformances unless otherwise stated. Critical attributes must be verified at Level VII with an AQL of 0.1, major attributes at Level IV with an AQL of 1.0, and minor at Level II with an AQL of 4.0; unspecified attributes default to major. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization adhering to DLA packaging standards. The items are designated as critical application items and must be physically identified per RQ017. Delivery is FOB origin with a zero variance tolerance, and inspection and acceptance occur at the origin. Documentation for source approval and removal of government identification from non-accepted items must follow specified procedures. The shipment is destined for the Joint Logistics Unit Vic in Bandiana, Australia, with freight handled by the Australian Government Cargo Office via DHL. The contract was issued under solicitation SPE4A6-26-T-11GX with a required delivery date of October 22, 2024, and is classified under NAICS code 335311, managed by the Department of Defense’s ASC Commodities Division.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERAN
Solicitation # SPE4A6-26-U-3296
This contract specifies the procurement of a screw with close tolerance, identified by NSN 5305-01-321-6120 and part number NAS1973T26T, manufactured to meet the non-government standard NAS1972 through NAS1980 Revision 7 and NAS4004 Revision 16. The item is classified as a commercial item and a critical application component requiring source inspection, with all threads of class 3A and 3B subject to dimensional verification per System 22 of FED-STD-H28/20, excluding very small internal and external threads. Manufacturing must adhere to the current revision of the applicable standard, and prior revisions are acceptable only for historically produced items. The manufacturing process requires forging, necessitating specialized tooling, and the supplier must comply with SAE AS9100 quality requirements, regardless of whether they are a manufacturer or non-manufacturer. All items must be marked per MIL-STD-130N paragraph 4.1.b(2) in addition to manufacturer logos and material identifiers, and packaged in accordance with MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero defect acceptance unless otherwise specified, and attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. The contract is a total small business set-aside under NAICS 332722, with delivery due in 108 days FOB origin, no variance permitted in quantity, and inspection and acceptance occurring at the origin. The unit of issue is each, with a quantity of 65 units, and packaging must adhere to DLA’s packaging requirements including palletization standards. The solicitation is managed by the Defense Logistics Agency and is open to responses through the DIBBS system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, HEXA
Solicitation # SPE4A6-26-T-11GS
A hexagonal plain slotted nut, identified by NSN 5310-00-849-6883, is being procured in a quantity of 14 units under a fully competitive solicitation governed by military and federal specifications. The procurement is managed by the ASC Commodities Division under the Department of Defense, with performance taking place at Tinker Air Force Base, Oklahoma, 73145-8000. The solicitation, numbered SPE4A6-26-T-11GS, was posted on August 2, 2026, with responses due by August 10, 2026, and falls under NAICS code 332722 for screw, nut, bolt, and fastener manufacturing. The delivery timeline is set at 89 days after award, and the primary point of contact for inquiries is Vincent Price, reachable via phone or email provided through the Defense Logistics Agency’s DIBBS system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11CM
The contract is for a special-purpose electrical cable assembly with NSN 6150-01-424-8044, for a quantity of four units, under solicitation SPE4A6-26-T-11CM. The required delivery timeline is 316 days after order, and the solicitation closed on August 10, 2026, with a posted date of August 2, 2026. The item falls under NAICS code 334419 and is procured by the Defense Logistics Agency’s ASC Commodities Division. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Marcita Robinson. The cable assembly is subject to stringent technical and quality requirements referenced from the DLA Master List, and must comply with DLA packaging standards. Surplus supply is explicitly not acceptable, and government identification must be removed from any non-accepted items. The item is governed by cybersecurity and export control policies, including CMMC Level 2 certification requirements for the third-party assessment organization involved, and the application of Covered Defense Information. Technical data associated with the cable assembly is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies. Access to this controlled data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and DLA’s questionnaire, and have received explicit approval from DLA authorities. DFARS 252.225-7048 governs the handling of this sensitive technical data.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
LIGHT, NAVIGATIONAL,
Solicitation # SPE4A6-26-T-11FH
The contract pertains to the procurement of a commercial off-the-shelf navigational marine light identified by part number 3680283000 and NSN 6220-01-729-1879, with a requirement for four units to be delivered within twenty days from the order date. The item is classified as a critical application item and must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping materials, and labeling in accordance with MIL-STD-129 with the special marking code “01 - Fragile.” Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the quantity variance is strictly zero percent. The shipment must be sent by the fastest traceable means, explicitly prohibiting parcel post, and is addressed to the Naval Amphibious Base Coronado in San Diego, California, with the freight address and shipment details clearly defined. The contract is issued under solicitation SPE4A6-26-T-11FH with a required delivery date of July 23, 2026, and is governed by DoD authorized unit of issue and acquisition procedures. All supplies must be free of government identification if not accepted, and government use fields indicate specific logistics and distribution codes for internal tracking.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-11EB
The contract specifies the procurement of a radio frequency cable assembly under solicitation SPE4A6-26-T-11EB, with a quantity of five units to be delivered within 20 days to Naval Station Newport, Rhode Island, FOB origin. All items must comply with stringent technical, quality, and packaging standards outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must adhere to MIL-STD-2073-1E preservation, MIL-STD-129 marking, and DLA packaging requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs. The item is designated as a critical application with source approval requirements and must be traceable throughout delivery, prohibiting parcel post in favor of certified freight methods. The contract strictly prohibits the intentional use of mercury or mercury-containing compounds in the product, packaging, preservation, or marking, with limited exceptions for functional components such as batteries or instruments specified by NAVSEA, which must include secondary containment. Packaging must meet palletization guidelines and use only approved materials, with special attention to the prohibition of mercury in any preservation or packing materials. The NSN 5995017220586 is the sole identified material, with a fixed quantity and no variance allowed. Shipments must be directed to the designated military address, labeled appropriately, and delivered by the required delivery date of July 22, 2026. The contract is managed by the Department of Defense’s ASC Commodities Division, with point of contact Ernest Penrose, and the NAICS code 335931 applies to the nature of the product being procured.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, RETAINING
Solicitation # SPE4A6-26-T-11CQ
The contract pertains to the procurement of one unit of a PIN, RETAINING with NSN 5315-58-002-1217 and part number MUHLD148-831 from HIAB USA INC, issued under solicitation SPE4A6-26-T-11CQ. Delivery is required within 10 days FOB origin to the US Army SSA SUSBDE APS 405TH AFSB at Leutsestraat 34, Zutendaal 3690, Belgium, with inspection and acceptance occurring at the destination. The item is to be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. Packaging and palletization must adhere to DLA’s standardized requirements, and the unit of issue is EA. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated in the sample unless otherwise specified, and attributes must be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Item Unique Identification is not required per service customer direction, and DFARS 252.211-7003(c)(1)(i) applies. Technical and quality requirements referenced by R or I numbers are incorporated via the DLA Master List, and the revision in effect at the solicitation issue date governs. The required delivery date is June 25, 2026, with no variance allowed in quantity. Transportation and shipping details align with DLAD Proc Notes C19 and C20, and the contract designates W51109 as the RDD and freight address, with government use codes and project identifiers included for tracking.
Other Fabricated Wire Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-11EA
This contract pertains to the procurement of a cable assembly identified as RADI with NSN 5995-01-722-6071 and part number MINIBEND LR-41.00 manufactured by HUBER+SUHNER ASTROLAB, INC. A total of five units are required with a unit price of $5.00, resulting in a total contract value of $25.00, to be delivered within 20 days to the Naval Undersea Warfare Center Division Newport in Rhode Island. Delivery is FOB origin and inspection and acceptance occur at the destination. The item is classified as a commercial off-the-shelf (COTS) product and a critical application item, subject to specific quality and technical requirements referenced from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Strict packaging regulations apply, requiring compliance with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes needed. Packaging must adhere to DLA requirements, prohibiting any mercury or mercury-containing compounds in preservation, packaging, or labeling, in alignment with NAVSEA 5100-003D, except for specific functional uses in batteries, sensors, or instrumentation. Parcel post is prohibited; shipping must occur via traceable means. The item is not subject to Item Unique Identification per customer request, and all documentation must follow source approval and removal of government identification protocols where applicable. The contract references precise unit of issue standards and requires delivery by July 23, 2026, with procurement governed under solicitation SPE4A6-26-T-11EA and governed by the Department of Defense through the ASC Commodities Division.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
KEY, WOODRUFF
Solicitation # SPE4A6-26-T-11HZ
The contract under reference KEY, WOODRUFF, solicitation number SPE4A6-26-T-11HZ, issued by the Department of Defense’s ASC Commodities Division, requires the delivery of 20 units of NSN 5315-01-173-9441 with a delivery deadline of 20 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or RFP issue date for large acquisitions, unless amended. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in sampled lots unless otherwise stipulated. Documentation for source approval requests must comply with RC001 standards. The supplier is strictly prohibited from intentionally adding mercury or mercury-containing compounds to any supplied hardware or materials, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents designated by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. All supplies must be marked per physical identification requirements and government identification removed from non-accepted items. The point of contact is Samantha Hopkins, and performance is set in San Diego, CA, with responses due by August 10, 2026.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIV
Solicitation # SPE4A6-26-T-11GF
The contract entails the procurement of 300 units of NUT, PLAIN, BLIND RIV with NSN 5310-01-666-2654 under solicitation SPE4A6-26-T-11GF, with delivery required within 207 days FOB origin. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization specified accordingly. Sampling for quality verification shall follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise contracted, with attributes classified per critical, major, or minor levels corresponding to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with hardware except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or Navsea-specified chemical reagents; portable devices with mercury must include shock-proof construction and a secondary containment barrier as per NAVSEA 5100-003D. The product shall be manufactured to TDP Rev C Gen 3 per NAS1738 Rev 6 dated 11/30/2024, and the unit of issue is each (EA) with no variance allowed in quantity. Delivery is to be made to the DLA Distribution facility in New Cumberland, PA, with inspection and acceptance occurring at destination. The contract enforces zero tolerance for non-conforming items, requires full compliance with government identification removal protocols for rejected supplies, and mandates bare item marking per RQ017. The point of contact is Molitauoleava Langi, and the solicitation closed on August 10, 2026, with an original need date of March 6, 2027.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDER
Solicitation # SPE4A6-26-T-11GW
The contract specifies the procurement of one shoulder screw, part number SR-16 with NSN 5305-01-549-2013, under solicitation SPE4A6-26-T-11GW, with a required delivery within 20 days from the contract date. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-130N for physical identification marking and MIL-STD-129 for labeling. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with designated verification levels or AQLs. The screw must be free of intentional mercury or mercury compounds throughout its manufacturing, packaging, and preservation, except for narrowly defined functional exceptions such as batteries or sensors, and even then must meet NAVSEA containment standards. Packaging must conform to MIL-STD-2073-1E with preservation methods specified, palletization as per DLA requirements, and prohibition of mercury in any preservation or packing materials. Delivery is FOB origin to the USS HYMAN G RICKOVER (SSN 795) in Groton, CT, with shipper required to use the fastest traceable means, explicitly excluding parcel post. The contract requires CMMC Level 2 self-assessment compliance, and all markings, packaging, and documentation must precisely follow government-prescribed formats, with no variance allowed in quantity.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details