This Solicitation opportunity from Department Of Defense was posted on July 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

BEARING, BALL, ANNULA

Closed

SPE4A0-26-T-3858Federal

Submission Closed07/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE4A6-26-T-26NV

This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 263 sleeve bushings under part number 3120-00-242-8431. The contract requires delivery within 64 days after receipt of order and is associated with solicitation number SPE4A6-26-T-26NV. Performance is to take place at Robins Air Force Base. The agreement is subject to strict technical and quality requirements, including DLA packaging standards and inspection and acceptance at origin. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific training to access the data. Item Unique Identification is not required for this order.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-75B7

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture of Breech Cap Assembly (NSN 1095-00-878-4911)

POSTED

DEADLINE

Supply of Fluid Filter Elements (NSN 2940-00-678-5357)

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Supply of Annular Ball Bearings (NSN 3110-00-921-3356)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

31--BEARING,BALL,THRUST

Solicitation # SPE4A6-26-T-28QU

The Department of Defense, through the ASC Commodities Division of DLA Aviation, has issued Request for Quotation SPE4A6-26-T-28QU for the procurement of 149 thrust ball bearings under NSN 3110001590943. This is a fixed-price contract with a delivery requirement of 263 days after award, with the items to be delivered to the DLA Distribution Depot Oklahoma. The solicitation is open for electronic submissions via the DIBBS system until September 18, 2026. This procurement is designated as an Air Force Critical Safety Item and carries strict domestic sourcing requirements; awards will only be made for bearings manufactured in the United States, its outlying areas, or Canada. Additionally, offers utilizing additive manufacturing processes are ineligible for award. Quality compliance is mandatory, requiring manufacturers to adhere to SAE AS9100 or an equivalent standard, while dealers and distributors must comply with AS9120. The contract specifies inspection and acceptance at the point of origin and utilizes the First Destination Transportation program. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, respectively. All payment requests and receiving reports must be processed through the Wide Area WorkFlow system. The procurement falls under NAICS code 332991 and incorporates various FAR and DFARS clauses, including those regarding the Buy American Act and the safeguarding of covered defense information.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-28RJ

Solicitation SPE4A6-26-T-28RJ is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 34 sleeve bushings (NSN 3120011153346). The procurement falls under NAICS code 332991 and requires quotes to be submitted electronically via the DIBBS portal by September 18, 2026. The approved source for this item is 62983 393102. Delivery is required within 170 days after order, with a need ship date of March 8, 2027, and a final delivery destination of DLA Distribution San Joaquin in Tracy, California. The contract mandates strict quality and packaging standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging must adhere to MIL-STD-2073-1E, with each sleeve wrapped in neutral paper to prevent damage, and marking must follow MIL-STD-129. Inspection and acceptance will occur at the point of origin. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and compliance with the Buy American Act and Berry Amendment. The procurement is managed by Buyer Shalonda Davis.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

31--BEARING,BALL,ANNULAR

Solicitation # SPE4A6-26-Q-1426

Solicitation SPE4A6-26-Q-1426 is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 527,000 annular ball bearings (NSN 3110-00-921-3356). This is a source-controlled drawing item requiring conformance to Basic Drawing 73030 541956, Revision D, and Reference QAP 13873 QAP-B02, Revision B. The items are to be delivered to DLA Distribution Cherry Point within 268 days after receipt of the order. The procurement is set aside for small businesses, and quotes are due by September 18, 2026. The government will award the contract based on best value, utilizing a trade-off process that weighs cost or price approximately equal to non-price factors. Past performance, specifically SPRS assessments and historical delivery schedule compliance, is identified as a significant evaluation factor. Technical requirements include CMMC Level 2 certification and adherence to specific ball and roller bearing acquisition restrictions. Packaging and marking must comply with MIL-STD-2073-IE and MIL-STD-129, with inspection and acceptance occurring at the point of origin. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

FY27-2A Foreign Bearings Waiver Package Sources Sought Notice

Solicitation # FY27-2AForeignBearingsWaiverPkgSourcesSoughtforDomesticBearings

The Department of Defense, through DLA Aviation, has issued a sources sought notice to identify viable domestic sourcing for several specific National Stock Numbers (NSNs) currently determined to be foreign manufactured. This effort is conducted in accordance with DFARS 225.7009 and DFARS 252.225-7016 to ensure compliance with domestic sourcing regulations for the listed bearing components. Interested parties should note that the government may not possess or have the authority to distribute all associated technical data, though current procurement item descriptions can be provided upon request. All standard requirements for source approval, configuration control, and part numbering apply. Responses are due by September 24, 2026, under NAICS code 332991.

POSTED

DEADLINE

Manufacture of Flexible Connections (NIIN 011445976)

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supply of Fluid Filter Element (NSN 2910-01-723-5011)

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Supply of Precision Bearings (MS21151-10)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 9 days

AI Contract Overview

The contract specifies the procurement of an annular ball bearing with NSN 3110013003716 and part number AA-226-1, requiring delivery of one unit within five days FOB origin, with no variance permitted in quantity. All materials must comply with stringent domestic sourcing restrictions, mandating that the bearing be manufactured in the United States, its outlying areas, or Canada, and that more than 50% of the total cost of its components—inclusive of rolling elements, retainer, inner race, and outer race—must originate from these regions. Contractors are required to submit a formal declaration regarding the origin of materials, accessible via the DLA Foreign Bearing Waiver website; failure to provide this documentation renders the quote ineligible for award. If no compliant offers are received, the solicitation may be canceled or held pending a waiver request under DFARS 225.7009-4. Inspection and quality assurance follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-197M, including specific preservation methods based on bearing type and closure, protective lubrication protocols, and marking compliance with MIL-STD-129. Palletization and all packaging activities must meet DLA’s RP001 requirements, with the contractor’s facility subject to quality verification per Section 4 of MIL-DTL-197M. The solicitation, issued under SPE4A0-26-T-3858, has a response deadline of July 20, 2026, and is managed by the Department of Defense’s Aviation Supply Chain ESOC Buys.

General Info

Procure one US/Canada-made annular ball bearing, FOB origin, with 50% domestic content, compliant packaging, and mandatory origin declaration by July 20, 2026.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE4A0-26-T-3858

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 12

Solicitation

Response DeadlineJul 20

Deadline has passed

Submission Closed

07/20/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

View Agency Profile

Office AddressUSA

Contacts

Danita Davis

contact@example.gov

+1 (555) 000-0000

Full Description

BEARING,BALL,ANNULA
BEARING, BALL, ANNULAR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
IDENTIFY TO:
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
BEARING RESTRICTRONS:
RESTRICTION ON THE ACQUISITION OF BALL AND ROLLER BEARINGS (JUN 2011)
AN AWARD FROM THIS SOLICITATION CAN ONLY BE MADE FOR A BEARING
MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA AND FOR
EACH BALL OR ROLLER BEARING, THE COST OF THE BEARING COMPONENTS (ROLLING
ELEMENTS, RETAINER, INNER RACE, OR OUTER RACE) MANUFACTURED IN THE
UNITED STATES, ITS OUTLYING AREAS, OR CANADA MUST EXCEED 50% OF THE
TOTAL COST OF THE BEARING COMPONENTS OF THAT BALL OR ROLLER BEARING. SEE
DFARS CLAUSE 252.225-7016, RESTRICTION ON ACQUISITION OF BALL AND ROLLER
BEARINGS.
A CONTRACTOR’S DECLARATION ON THE DOMESTIC/FOREIGN NATURE OF MATERIAL
BEING OFFERED IS REQUIRED. PLEASE VISIT THE FOREIGN BEARING WEBSITE AT
https://www.dla.mil/Aviation/Business/Foreign-Bearing-Waiver/. TO OBTAIN A COPY OF THE CONTRACTOR’S DECLARATION. PLEASE PRINT, COMPLETE, SIGN AND HAVE READY FOR SUBMISSION UPON REQUEST FROM THE BUYER. FAILURE TO PROVIDE THIS INFORMATION MAY RESULT IN YOUR QUOTE NOT BEING CONSIDERD FOR AWARD.
IN THE EVENT NO OFFERED BEARINGS MEET THIS SOURCING REQUIREMENT, THIS SOLICITATION MAY BE CANCELLED OR HELD PENDING A WAIVER APPROVAL REQUESTED BY THE PROCUREMENT ACTIVITY. UPON RECEIPT OF AN APPROVED WAIVER FROM THE DOMESTIC SOURCING RESTRICTION, THE REQUIREMENT MAY BE RE-SOLICITED OR BUYER MAY REQUEST A QUOTE EXTENSION. SEE DFARS 225.7009-4, WAIVER, RESTRICTION ON BALL AND ROLLER BEARINGS.
SAMPLING:
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
SPE4A0-26-T-3858
SECTION B
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
PLANET PRODUCTS CORPORATION 99296 P/N AA-226-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016916417 0001 EA 1.000
NSN/MATERIAL:3110013003716
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:0
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ADDITIONAL INFORMATION PRESERVATION, PACKAGING, PACKING, AND MARKING REQUIREMENTS SHALL BE IN ACCORDANCE WITH MIL-DTL-197M.
1. METHOD OF PRESERVATION SHALL BE DETERMINED BY BEARING TYPE AND SIZE (REFER TO TABLE I).
2. PARAGRAPH 3.10.2, SELECTION OF UNIT PRESERVATION, APPLIES. PROTECTIVE LUBRICANT OR PRESERVATIVE COMPOUND SHALL BE DETERMINED DEPENDENT UPON BEARING TYPE AND CLOSURE IN ACCORDANCE WITH PARAGRAPH 3.3.4 AND TABLE II. FOR PRESERVATION PROCESS CONTROLS, DEPENDANT UPON BEARING TYPE, CLOSURE, AND LUBRICANT<(>,<)> PARAGRAPHS 3.4 THROUGH 3.9 APPLY.
3. PACKAGING PRECAUTIONARY MARKING REQUIREMENTS OF PARAGRAPH 3.12.4 APPLY.
4. CONTRACTOR'S PACKAGING FACILITY SHALL ADHERE
SPE4A0-26-T-3858
SECTION B
PR: 7016916417 PRLI: 0001 CONT’D
TO THE QUALITY ASSURANCE VERIFICATION
REQUIREMENTS AS CONTAINED WITHIN SECTION 4 OF
MIL-DTL-197M.
...END OF SPECIAL PACKAGING NSN/Part Number: 3110-01-300-3716 Quantity: 1 EA Purchase Request: 7016916417QTY: 1 Delivery: 5 days ADO