This Solicitation opportunity from Department Of Defense was posted on April 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

BEARING, BALL, ANNULAR

Closed

SPE4A6-26-T-20J7Federal

Submission Closed04/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332991

New

DIBBS

Supply of Ball Joints (NSN 3040218786687)This subcontract involves the procurement of 298 units of ball joint hardware, identified by NSN 3040218786687, to support prime contractors fulfilling DLA supply contracts. The selected provider is responsible for manufacturing or sourcing new components that strictly adhere to technical specifications, with a clear prohibition against the use of reconditioned or surplus items. The contract mandates strict adherence to military standards for logistics and compliance, specifically requiring packaging per MIL-STD-2073-1E and RP001, and shipment marking according to MIL-STD-129. Additionally, the provider must comply with DFARS 252.223-7008 and 252.225-7007 regulations. This requirement is managed by the DLA Weapons Support Strategic Acquisition Program Directorate under the Department of Defense.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Supplier of Collet Bodies for Linde Welding TorchesThis subcontract involves the supply of 239 welding torch collet bodies and gas lens collet bodies to prime contractors supporting the Defense Logistics Agency Weapons Support Nuclear Reactor Program. The required parts must be compatible with Linde Model HW-20 and HW-25 Torches and match NSN 3431001236684. Performance will take place in San Diego, California, under NAICS code 332991. The supplier is required to adhere to strict quality and regulatory standards, including Critical Application Item specifications and Buy American DFARS 252.225-7001 standards. Additionally, all shipments must comply with MIL-STD-129 marking requirements. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Fluid Pressure Line Connector SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support Maritime Supply Chain ESOC Buys, requires the procurement of one fluid pressure line multiple connector identified by NSN 4730014749295. The selected source or manufacturer must ensure the item is packaged according to ASTM D3951 standards and marked and labeled in compliance with MIL-STD-129. The physical unit must be delivered to Fort Benning, Georgia, within five days of the contract award. This requirement falls under NAICS code 332991 and is intended for prime contractors fulfilling DLA supply contracts.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Actuator Bearing Assembly ManufacturingThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the manufacture and assembly of 56 Actuator Bearing Assemblies. The selected contractor must utilize high-precision CNC machining to produce components according to Reference Drawing NR 98752 and ensure all final units are assembled in strict compliance with TDP Rev B Gen 2 and SAE AS9100 standards. As part of the quality assurance process, the contractor is required to perform a First Article Test on one unit and submit the corresponding test reports. The project is designated as a Total Small Business Set-Aside under NAICS code 332991, with the place of performance located at Hill AFB. Interested parties must respond by November 5, 2026, to be considered for this precision manufacturing effort.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Annular Ball Bearing Supplier (NSN 3110124080222)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aluminum Alloy Tubing SupplierThis subcontract involves the supply of raw aluminum alloy tubing for prime contractors supporting the DLA Weapons Support Land Supply Chain. The required material must feature a 1/2 inch outer diameter and a 0.062 inch wall thickness, ensuring full compliance with Pratt & Whitney Canada Corp part number 3014948. Performance will take place in Cherry Point, North Carolina. To ensure quality and regulatory adherence, the supplier must comply with the Buy American Act and provide comprehensive material certifications and mill test reports to verify the alloy composition and dimensions. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement under NAICS code 332991.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Ball Bearing Retainer / Bearing Cage Assembly SupplierThis subcontract involves the supply of two precision-manufactured ball bearing cage assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The components must be manufactured to NSN 3110015292375 specifications in strict accordance with the DLA Master List of Technical and Quality Requirements. To ensure defense-grade tolerances, the supplier must utilize precision machining equipment and maintain full compliance with the Buy American Act. Quality assurance is a critical requirement, necessitating the use of zero-based sampling plans per MIL-STD-1916 or ASQ H1331. The project is categorized under NAICS code 332991, with the place of performance located at Joint Base Anacostia. Interested parties must adhere to the response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

CLOTH, FOCUSING, PHOTOGR

Solicitation # SPE8EN-27-T-0224

Solicitation SPE8EN-27-T-0224 is a request for quotations issued by DLA Troop Support for the procurement of 50 units of photographic focusing cloth, identified by NSN 6760-01-377-5709. The contract specifies a delivery timeframe of 94 days after order, with a need ship date of February 12, 2027, and a required delivery date of March 4, 2027. Shipping is established as FOB Origin under the First Destination Transportation program, with the delivery destination set as the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, while ensuring compliance with DLA Master List technical requirements and RP001 packaging requirements. Key regulatory obligations include the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system. The solicitation is categorized under NAICS code 332991 and requires offerors to maintain active registration in the System for Award Management.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

BEARING, BALL, ANNULAR

Solicitation # SPE4A6-27-T-7457

Solicitation SPE4A6-27-T-7457, issued by the DLA Weapons Support ASC Commodities Division, is a request for quotations for the procurement of four annular ball bearings under NSN 3110124080222. The requirement specifies a delivery period of 72 days after order, with a need ship date of January 17, 2027, and a final required delivery date of June 1, 2027. Delivery is FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. Strict domestic sourcing restrictions apply per DFARS 252.225-7016, requiring that the bearings be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component cost originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials. Technical compliance requires adherence to MIL-DTL-197M for quality assurance and preservation, MIL-STD-129 for marking, and RP001 for DLA packaging requirements. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

BEARING, BALL, ANNULAR

Solicitation # SPE4A6-27-R-X128

Solicitation SPE4A6-27-R-X128 is a small business set-aside for the procurement of one annular ball bearing, part number 3110-01-034-7002, designated as a critical application item. The contract is a firm fixed price award with a delivery requirement of 184 days after the order date, shipped FOB destination. Technical compliance is governed by TDP Rev A Gen 1 and Basic QAP 13873 QAP-B02 Revision B, with quality standards adhering to ISO 9001:2015. Packaging, preservation, and marking must comply with MIL-DTL-197M, MIL-STD-129, and MIL-STD-2073-1E, while palletization must follow DLA requirement RP001. A critical sourcing restriction applies under DFARS 252.225-7016, requiring the bearing to be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the total cost of the bearing components originating from these regions. Offerors must provide a signed Contractor’s Declaration regarding the domestic or foreign nature of the material to be considered for award. The government will determine the best value based on a comparative assessment of price, past performance, and delivery, with SPRS assessments weighted most heavily within the past performance evaluation. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

BEARING, ROLLER, CYLINDR

Solicitation # SPE4A6-27-T-7350

Solicitation SPE4A6-27-T-7350 is a request for quotations from the DLA Weapons Support ASC Commodities Division for the procurement of 41 cylindrical roller bearings, identified by NSN 3110-01-446-5157. The items are designated as critical application items and must be delivered FOB Origin within 151 days, with a required delivery date of March 20, 2027. Inspection and acceptance will occur at the destination. A primary requirement of this contract is strict domestic sourcing; awards will only be made for bearings manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the total component cost originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds. Technical compliance is governed by MIL-DTL-197M for preservation and packaging, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. Quality assurance requires adherence to the DLA Master List of Technical and Quality Requirements and specific sampling methods such as MIL-STD-1916 or ASQ H1331. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered telecommunications equipment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-7461

This solicitation, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of 317 sleeve bushings, part number NAS538-5P017 (NSN 3120-00-827-2760). The items are designated as critical application items and may require specific casting or forging processes, for which the government may not provide the necessary special tooling. Delivery is required within 151 days after order, with a need ship date of April 6, 2027, and a final required delivery date of April 14, 2027. The shipment is FOB Origin and will be delivered to DLA Distribution Corpus Christi, Texas. Quality assurance is stringent, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the origin, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. The contract incorporates various federal and defense regulations, including the Buy American Act, HUBZone price evaluation preferences, and strict cybersecurity reporting requirements under DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days

AI Contract Overview

The contract calls for the procurement of nine units of annular ball bearings, identified under NSN/Part Number 3110-00-068-2648, with a delivery timeline of 171 days after the award date. This acquisition is managed by the Department of Defense through the Defense Logistics Agency (DLA), specifically the ASC Commodities Division, with the place of performance in Cherry Point (zip code 28533-5040). The contract incorporates several technical, quality, packaging, inspection, and export control requirements as detailed in the DLA Master List of Technical and Quality Requirements. The contract acknowledges the possibility that specialized casting or forging, which may require government assistance for tooling, will be necessary, and processes are in place to support requests for such assistance. Significant clauses include strict adherence to export control regulations related to technical data under ITAR and EAR, restricting dissemination to authorized contractors who have completed specific training and certification programs. Quality assurance measures outline inspection and acceptance at origin, handling of government identification on non-accepted supplies, and use of calibrated measuring and test equipment. The solicitation and contract terms emphasize compliance with Defense Federal Acquisition Regulation Supplement (DFARS) provisions and mandated procedures, ensuring that all technical and contractual obligations align with federal defense procurement standards. The primary point of contact for this contract is Katherine Zacharias, and the solicitation deadline and other administrative details are managed through the indicated DLA procurement platform.

General Info

Procurement of nine annular ball bearings, delivery in 171 days, strict DLA and export compliance.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332991 - Ball and Roller Bearing Manufacturing

Place of Performance

PR: 7016336841 PRLI: 0001 CONT’D, CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

SPE4A6-26-T-20J7.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedApr 14

Solicitation

Response DeadlineApr 22

Deadline has passed

Submission Closed

04/22/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressUSA

Contacts

KATHERINE ZACHARIAS

contact@example.gov

+1 (555) 000-0000

Full Description

BEARING,BALL,ANNULAR
BEARING,BALL,ANNULAR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RT001: MEASURING AND TEST EQUIPMENT
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains contact@example.gov.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3110-00-068-2648 Quantity: 9 EA Purchase Request: 7016336841QTY: 9 Delivery: 171 days ADO